Scribd
Upload
60 views

Design of Pile Foundation For Piles in Granular Soils A) Side Friction Resistance of Pile

1) The document summarizes the design of a pile foundation for a pile with a diameter of 1000mm in granular soils. 2) It calculates the side friction resistance and end bearing resistance of the pile from the ground surface to a depth of 20 times the pile diameter (20m). 3) The total safe load on the pile is determined to be 123.16 tons under normal conditions and 153.94 tons under seismic conditions, which exceeds the total expected load on the pile of 108.52 tons.

Uploaded by

Hoque joynul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
60 views

Design of Pile Foundation For Piles in Granular Soils A) Side Friction Resistance of Pile

1) The document summarizes the design of a pile foundation for a pile with a diameter of 1000mm in granular soils. 2) It calculates the side friction resistance and end bearing resistance of the pile from the ground surface to a depth of 20 times the pile diameter (20m). 3) The total safe load on the pile is determined to be 123.16 tons under normal conditions and 153.94 tons under seismic conditions, which exceeds the total expected load on the pile of 108.52 tons.

Uploaded by

Hoque joynul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 2

Design of Pile Foundation

For Piles in Granular Soils


A) Side Friction Resistance of Pile
Dia of Pile = 1000 mm m

Overburden pressure increases upto a depth of 20 times the pile dia


i.e upto a depth of 20 1.00 = 20.0 m upto RL 74.73 m
Minimum Length of Pile = 4 R or 4 T = 4 x 3.12 = 12.47 m
a) From RL 94.730 to RL 79.991 m H= 14.74
Pressure at the bottom of pile = 14.7 x 1.00 =14.74 T /m2
f = 28.0 d = 18.8 Tan d = 0.339
Coefficient of earth pressure at rest K = 1.0 94.73
ASI = 3.14 x 1.00 x 14.74 = 46.28 M2
PDI =1/2 x 14.74 = 7.37 T /m2 14739.15529 mm

Qu1 = k x PDI x Tan d x Asi RL79.99m


A
= 1.00 x 7.4 x 0.339 x 46.28
= 115.78 T 0.00 m

B
a) From RL 79.991 to RL 79.991 m RL79.99m
PDI = 1.00 x 14.74 = 14.74 T /m2
ASI =3.14x 1.00 x 0.00 = 0.00 M2
Qu2 = k x PDI x Tan d x Asi

= 1.00 x 14.7 x 0.339 x 0.00


= 0.00 T

B) End Bearing Resistance of Pile


AP = 3.14 x 1.002 0.79 D= 1.00
m2
4 == PD =
m 2
g= 1.0 T /m3 14.7 T /m
f = 28.0 d = 28.0 Tan d = 0.531
From Fig 5 of IS:1904-1966
Ng = 17.8 Nq = 16.0
Qu3 = AP x ( 1/2 x D x g x Ng + PD x Nq )

= 0.79 x ( 1/2 x 1.000 x1.00 x 17.8 + 14.7 x 16.0 )


= 192.1 T
2) For Cohesive properties of soil - = ) /

A) Side Friction Resistance of Pile


a) From RL -94.730 tox RL 79.99 m H= 14.74
m
a= 0.50 C = 0.00 T/m2
As = 3.14 x 1.00 x 14.74 = 46.28 m2
Qu1 = a x c x As = 0.50 x 0.00 x 46.28 = 0.00 T
B) End Bearing Resistance of Pile
Ap = 3.14 x 1.00 2 0.785 m2 Cp = 0.0 T/m2
/4 =
Nc = 9.0
Qu2 = Cp x Nc x Ap = 0.0 x 9.0 x 0.785 = 0.0 T
Total QU = 115.78 + 0.00 + 192.11 + 0.00 0.0
+ = 307.89 T
Applying F.O.S = 2.5
Safe load on -Pile = x
307.9 2.5 =
x 123.16
T (Under normal case)
= 1.25 x 123.16 = 153.94 T (Under seismic case)
Self weight of pile = 3.14 x 4 x 1.00 2 x 16.66 x 1.4 = 18.3 T
Total load at bottom of pile = 90.21 + 18.31 = 108.52
Against safe load of + x
153.94 T
+ (OK) -

You might also like