Fundamental of Mechanical Engineering Course Code:3300015

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT

COURSE CURRICULUM

Course Title: Fundamental of Mechanical Engineering

(Code: 3300015)

Diploma Programmes in which this course is offered Semester in which offered

Electrical Engineering, Plastic Engineering First Semester

Ceramic Engineering, Metallurgy Engineering, Mining Second Semester

Engineering, Transportation Engineering

1. RATIONALE:
In the era of technology integration, it has become unavoidable to possess the basic knowledge of various
engineering disciplines. The advancement in technology is the best on multi technology integration and
hence in performance too. The motive of this subject is to enhance the knowledge & skill level in the inter
disciplinary area to strengthen the present practices.

This course is specially designed with a view to impart basic knowledge of other conventional disciplines
(other than own discipline).

This course mainly encompasses the major and general areas of mechanical engineering which are being
used by common man to large industrial sectors. A technician has to know many times the implications
and knowledge of other disciplines so as to conclude the solution of his/her own branch tasks.

2. LIST OF COMPETENCIES:

i. To perform the simple tasks related to mechanical engineering so as to reduce the dependency on
mechanical engineers and to achieve the reliability and quality of own branch’s tasks.

3. TEACHING AND EXAMINATION SCHEME:

Teaching Scheme Total Credits Examination Scheme

(In Hours) (L+T+P) Total Marks
Theory Marks Practical Marks

L T P C ESE PA ESE PA
150
3 0 2 5 70 30 20 30

Legends: L-Lecture; T – Tutorial/Teacher Guided Theory Practice; P - Practical; C – Credit;

ESE - End Semester Examination; PA - Progressive Assessment.

GTU/ NITTTR Bhopal/12 Gujarat State

Fundamental of Mechanical Engineering Course Code:3300015

4. DETAILED COURSE CONTENTS:

Major Learning
Unit Sub-topics
Outcomes

Unit –1 1.1 Identify 1.1 Introduction of mechanical engineering.

mechanical 1.2 Use of mechanical engineering :
INTRODUCTION related basic a. In day to day life.
components and b. Interdisciplinary use.
their uses. 1.3 Items in general use- identification criteria, major types,
specifications and uses : such as bolts, nuts, washers,
bearings, bushes, belts, springs, levers, couplings,
brakes, screws, rivets, keys, o’ rings, oil seals, gears,
pulleys, shafts, axles, etc.
1.4 Pipes and pipe fittings- Types , specifications and uses
of pipes and pipe fittings.
1.5 Hand and power tools:
a. Types, specifications and uses of spanners (such
as fix, ring, box, pipe, allen, adjustable, etc.).
b. Types, specifications and uses of hand tools
(such as pliers, screw drivers, saws, hammers,
chisels, cutters, planes, etc.).
c. Types, specifications and uses of power
tools(drill, chipper, etc.)

Unit –2 2.1 Identify the type 2.1 Power transmission:

of power a. Importance.
POWER
transmissions b. Modes (belt drives, rope drives, chain drives and
TRANSMISSION
& SAFETY being used. gear trains).
2.2 Follow general c. Types of belts.
safety norms. d. Gear train-concept, transmission ratio.
e. Applications.
2.2 Types and applications of couplings in power
transmission.
2.3 Causes and remedies of general accidents in power
transmission.
2.4 Safety norms to be followed for preventing accidents
and damage in power transmission.
2.5 Safety norms to be followed in mechanical based
industries / shop floors.

Unit – 3 3.1 Understand 3.1 Welding.

common metal a. Types.
PROCESSES ON joining and b. Working setup of arc and gas welding,
MATERIAL
machining accessories and consumables.
methods. c. Types of work carried out by welding.
d. Precautions and safety during arc and gas
welding.
GTU/ NITTTR Bhopal/12 Gujarat State
Fundamental of Mechanical Engineering Course Code:3300015

Major Learning
Unit Sub-topics
Outcomes
3.2 Brazing and Soldering.
a. General set up.
b. Applications.
3.3 Gas cutting.
a. Working setup, accessories and consumables.
b. Types of work carried out.
c. Precautions and safety during gas cutting.
3.4 Foundry.
a. Concept.
b. Process of getting cast material.
c. Applications.
3.5 Other metal forming and cutting operations- bending,
shearing-concept and applications.
3.6 Basic machine tools.
a. Working principle of hacksaw, lathe, drill and
milling machines.
b. Types of operations / jobs which can be
performed on machine tools listed above.

UNIT –4 4.1 Explain 4.1 Steam.

working of a. Generation process.
STEAM boilers and b. Properties.
GENERATION
prime 4.2 Boilers.
AND PRIME
MOVERS movers. a. Classification.
b. Working.
c. Accessories and mountings-types and
applications.
d. Applications.
e. Regulations and safety requirements.
f. Common troubles and remedies.
4.3 Prime movers.
a. Meaning.
b. Classification.
c. Working.
d. Steam turbine-working.
e. Gas turbine-types and applications.
f. Common troubles and remedies.

Unit –5 5.1 Explain working 5.1 Internal combustion engines.

of internal a. Meaning.
INTERNAL b. Classification.
combustion
COMBUSTION
engines. 5.2 Working of petrol engine, diesel engine and gas engine.
ENGINES
5.3 Performance parameters.
5.4 Main parts and functions.
5.5 Applications.
5.6 Common troubles and remedies.

GTU/ NITTTR Bhopal/12 Gujarat State

Fundamental of Mechanical Engineering Course Code:3300015

Major Learning
Unit Sub-topics
Outcomes

Unit– 6 6.1 Identify the 6.1 Concept of theory of fluid flow.

applications of 6.2 General properties of fluids.
HYDRAULIC fluid concepts. 6.3 Pump.
AND
6.2 Use pumps and a. Working principle.
PNEUMATIC
DEVICES other hydraulic – b. Types.
pneumatic c. Working of centrifugal and reciprocating pumps.
equipments and d. Performance parameters.
machineries. e. Main parts of pumps and their functions.
f. Common troubles and remedies.
6.4 Water turbines-working principle, types and
applications.
6.5 Common troubles and remedies of water turbine.
6.6 Air compressor.
a. Working principle.
b. Types.
c. Performance parameters.
d. Applications.
6.7 Other hydraulic/pneumatic/ hydro-pneumatic
equipments.
a. Principle of working-hydraulic lift, hydraulic
pump, hydraulic power pack, hydraulic jack.
b. Applications of above.

Unit – 7 7.1 Select proper 7.1 Need of material handling.

material handling 7.2 Types , principle of working and applications of material
MATERIAL equipment. handling equipments.
HANDLING 7.2 Identify common a. Hoisting equipments.
reasons for b. Conveying equipments.
common c. Surface & overhead equipments.
troubles. d. Earth moving machineries.
e. Construction machineries.
7.3 Criteria for selection of material handling equipments.
7.4 Factors affecting selection of material handling
equipments.
7.5 Selection of suitable material handling equipment for the
given situation.
7.6 Common troubles and remedies.

GTU/ NITTTR Bhopal/12 Gujarat State

Fundamental of Mechanical Engineering Course Code:3300015

5. SUGGESTED SPECIFICATION TABLE WITH HOURS & MARKS (THEORY )

Distribution of Theory Marks

Unit Unit Title Teaching R U A Total
No. Hours Level Level Level
1. Introduction 4 5 0 2 07
2. Power transmission & safety 8 7 7 0 14
3. Processes on material 8 7 3 4 14
4. Steam generation and prime movers 4 3 4 0 07
5. Internal combustion engines 6 3 4 2 09
6 Hydraulic and pneumatic devices 6 3 3 3 09
7 Material handling 6 7 0 3 10
Total 42 35 21 14 70

Legends:
R = Remembrance; U = Understanding; A = Application and above levels.

NOTES:

a: If mid sem test is part of continuous evaluation, unit numbers 1, 2 and 3 are to be considered.
b: Ask the questions from each topic as per marks weightage. Optional questions must be asked from the
same topic. That is weightage of compulsory attendance part of questions will be equal to marks
allotted to each topic.

6. SUGGESTED LIST OF EXERCISES/PRACTICAL/EXPERIMENTS

The exercises/practical/experiments should be properly designed and implemented with an attempt to develop
different types of skills leading to the achievement of the competency. Following is the list of
exercises/practical/experiments for guidance.
.
Ex. Unit
Practical Exercises/Experiment Hours
No. No.
Demonstrate use of various mechanical items, spanners, hand
tools and power tools. Student will prepare the report which
1 1 02
will include sketches of each item demonstrated with
specifications and applications.
a: Demonstrate various power transmission methods. Also
demonstrate items used in power transmission with
material of construction and specifications of each item.
Student will prepare the report on working principles, set
2 2 up sketch, working parameters, specifications of items and 04
safety norms followed.
b: Student will calculate velocity ratios for belt drives and
number of teeth for gear train based on given data.

Demonstrate working of welding transformers, welding

process, gas welding process , gas cutting process, brazing
3 3 and soldering process. Student will prepare the report on 02
working principles, set up sketch, working parameters,
consumables used with specifications and safety norms
GTU/ NITTTR Bhopal/12 Gujarat State
Fundamental of Mechanical Engineering Course Code:3300015

followed.
4 3 Prepare simple weld joint job. 02
a: Demonstrate various machining methods on hacksaw,
lathe, drill and milling machines.
5 3 04
b: Also prepare simple turning job.

6 4 Study boiler, boiler mountings and boiler accessories. 02

Perform and study the effect of variation of load on fuel-
consumption of an I.C. engines (On petrol engine). Also
7 5 02
locate the faults in a given petrol engine and suggest
remedial measures.
Perform and study the effect of variation of load on fuel-
consumption of an I.C. engines (On diesel engine). Also
8 5 02
locate the faults in a given diesel engine and suggest
remedial measures.
9 6 Demonstrate a water-turbine. 02
10 6 Perform test on Air compressor. 02
Perform test on centrifugal pump. Also find fault and
11 6 02
remedies for centrifugal pump.
12 7 Study various types of materials handling equipments. 02
Total 28

NOTES:
1. It is compulsory to prepare log book of exercises. It is also required to get each excersise recorded in
logbook, checked and duly dated signed by laboratory assistant/instructor and teacher.
2. Student activities are compulsory and are also required to be performed and noted in logbook.
3. For 20 marks practical ESE, students are to be assessed for competencies achieved.

7. STUDENT ACTIVITIES:

S. No. Details of activity.

Student will visit the respective discipline industry / site (electrical, printing, as applicable) and will
1
prepare the list of mechanical engineering related equipments/machineries used by that industry / site.
Student will observe the fuel supply system of any bike and will also observe the working of engine.
2
Student will also identify the type and specification of engine used for bike.
3 Prepare the list of mechanical items surrounding to you.

8. SUGGESTED LEARNING RESOURCES:

A. List of Books.

S.No. Title of Books Author Publication

R.S.Khurmi and
1 Theory of Machines S.Chand
J.K.Gupta
2 Heat engine Shah & Pandya Charotar Publishing House
3 Hydraulic machines Jagdish lal Metropolitan Book Company
4 Elements of Workshop Hazara chaudhary Asia Publishing House
GTU/ NITTTR Bhopal/12 Gujarat State
Fundamental of Mechanical Engineering Course Code:3300015

S.No. Title of Books Author Publication

Technology ( Vol. 1,2)
5 Hydraulics R.C.Patel Acharya Book Depot
Pumps operation and Tyler and Hicks
6 Tata McGraw-Hill
maintenance
Material Handling
7 M.Rundenko Mir Publishers
equipments

B. List of Major Equipment/ Instrument.

a: Various mechanical items, spanners, hand tools and power tools..

b: Various power transmission devices.
c: Welding transformers, welding accessories and consumables.
d: Gas welding set up with all accessories and consumables.
e: Brazing and soldering setup with all accessories and consumables.
f: Gas cutting process set up with all accessories and consumables.
g: Workshop based machine tools-Hacksaw, Lathe, Drill and Milling.
h: Boiler/ Working model of boiler.
i: Petrol engine test rig.
j: Diesel engine test rig.
k: Air compressor test rig.
l: Water turbine / working model of water turbines.
m: Centrifugal pump test rig.
n: Models / working models of various material handling devices.

C. List of Software/Learning Websites: ---

a: http://www.youtube.com/watch?v=1cFu2bkZ7Vw&feature=related (ic engine)
b: http://www.youtube.com/watch?v=pCg1Ih_oVSA (pump)
c: http://www.youtube.com/watch?v=V3aPHmZ97yM&feature=related (pump)
d: http://www.youtube.com/watch?v=FENCiA-EfaA&feature=related (impeller)
e: http://www.youtube.com/watch?v=TBdUcGYo7XA (gas turbine)
f: http://www.youtube.com/watch?v=HzQPNpP55xQ (turbines)
g: http://www.youtube.com/watch?v=e_CcrgKLyzc (coal power plant)
h: http://www.youtube.com/watch?v=8GSUgwombdE&feature=related (boiler)
i: http://www.youtube.com/watch?v=A3ormYVZMXE (hy.lift)
j: http://www.youtube.com/watch?v=FP05rYRI9JU&feature=related (hy.pump)
k: http://homepages.cae.wisc.edu
l: http://www.youtube.com/watch?v=E6_jw841vKE&feature=related (air compressor)
m: http://www.youtube.com/watch?v=twM-GLUYQ-o&feature=related (belt drive)
n: http://www.youtube.com/watch?feature=endscreen&v=gjUwJ1CJVq4&NR=1 (belt drive)
o: http://www.youtube.com/watch?v=XunM7yUC06M&feature=related (gear drive)

GTU/ NITTTR Bhopal/12 Gujarat State

Fundamental of Mechanical Engineering Course Code:3300015

p: http://www.youtube.com/watch?v=ftdgB93QOD8&feature=related (gear box)

q: http://en.wikipedia.org/wiki/Boiler
9. COURSE CURRICULUM DEVELOPMENT COMMITTEE

Faculty Members from Polytechnics

 Shri. M.K.Shukla, Lecturer in Mechanical Engineering, Sir B.P.I., Bhavnagar.
 Shri. A.M.Talsaniya, Lecturer in Mechanical Engineering, Sir B.P.I., Bhavnagar.
 Shri. R.B.Variya, Lecturer in Mechanical Engineering, B and B institute of Technology,
Vallabhvidyanagar.
 Shri. N.C.Pandya, Lecturer in Mechanical Engineering, Government Polytechnic, Himmatnagar
Co-ordinator and Faculty Member from NITTTR Bhopal
 Dr. K.K. Jain, Professor & Head, Dept. of Mechanical Engg, NITTTR, Bhopal
 Dr. Joshua Earnest, Professor & Head, Dept. of Electrical & Electronics Engg, NITTTR, Bhopal

GTU/ NITTTR Bhopal/12 Gujarat State