the new generation

of control panels!

EPIC 2D
RANGE 0,37÷15 kW
 DIRECT ON LINE ELECTRONIC
CONTROL PANEL FOR 2 SINGLE OR
THREE PHASE PUMPS
 SELF LEARNING OF THE PUMP DATA
 ONE PANEL FOR ALL APPLICATIONS

 COMPACT BOX
 EASY TO INSTALL

MAIN FEATURES FEATURES

• Same control panel for potable, waste and industrial water applications • Power supply input 1 ~ 50/60Hz 230V±10% (SINGLE 230)
• Works with float switches, pressure switches and probes • Power supply input 3 ~ 50/60Hz 400V±10% (TRIPLE 400)
• Self-learning of the pump data • AUTO-0-MAN mode selection buttons (manual spring return)
• Duty-stand by logic • “Automatic motor running” green indicator light
• If pump 1 failures, pump 2 start automatically • “Power on” blu indicator light
• Self Holding setting • Safety device reset button (0)
• Pumps operate independently (2 pumps in 2 different tanks with • Auxiliary circuit protection fuses
different logics) • Main disconnect switch with door lock
• Pumps starting in cascade sequence with changeover • Provision for start-up capacitors (single phase versions)
• BMS (building management system input) • Tear-proof cable clamp output (only for ABS enclosures)
• Switch on and Switch off delay • IP55 protection rating (IP 65 available on request)
• Min and max amperage reading/protection and alarm • Ambient temperature: -5/+40 °C
• Min and max Voltage reading/protection and alarm • Relative humidity 50% at 40 °C (condensate free)
• Phase failure protection and alarm
• Dry running protection made by: Cos fi and minimum amperage
reading/protection and alarm
• Min and max water level alarm
•
•
Motor’s Klixon input and alarm
Water in oil chamber protection and alarm
OUTPUT
• Acoustic alarm
• Light alarm
HIGHLIGHTS • Free contact alarm output
• Set all the parameters with the pushing button and read the data • 12 V alarm output
on the display • 230 V alarm output
• The control panel works also with the 4-20 mA input (control the • GSM kit
pump with a pressure transducer or a level sensor) • GSM kit + battery back up
• Advance functions are:
• Motor auto test
• Scheduled maintenance option
• Furthers operations programs are:
• Multitank -2 pumps works independently in 2 separates tanks
• TIMER start and stop the pumps at a predetermined time
• GPRS REMOTE CONTROL SYSTEM – set and control your MADE IN ITALY
pumps with a remote control software (available soon)
• WIFI control system

ATLANTIC POWER CONTROL S.r.l.s. Via E. Fermi, 10 - 35020 Polverara (PD) Italy - Tel +39 0495855425 - [email protected]
www.atlanticontrol.com

TYPICAL INSTALLATION
4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2 4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2 4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2

H H K K H H K K H H K K

max max

P2 P2
start P2 start
start/stop P1
P1 P1
start/stop start
start
P1 P2 P1 P2 com P1 P2
stop min stop

4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2 4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2 4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2

H H K K H H H H K K

max

P1 P2
start/stop Pr1 Pr2 start/stop P1
start/stop P2
start/stop

P1 P2
start/stop start/stop

P1 P2 P1 P2 P1 P2
min min min min

4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2 4÷20 1 2 3 C H2O 1 H2O 2 G1 G2 G3 G4 K1 K2 4÷20 mA input for 4-20 mA sensor or pressure transducer

1/2/3/C input for level probes

H H K K H H K K
H input for water in oil chamber sensor/water leakage

K input for motor klixon

P1-P2
start/stop
P pump
T 4÷20 mA
Pr pressure switch

T pressure transducer

float switch for clear water

piezo
4÷20 mA float switch for waste water
P1-P2
start/stop P1 P2 P1 P2
min level probes

4÷20 mA piezoresistive sensor

MODELS
CODE MODEL KW HP A KG

201+D EPIC 2-230 D 0,37÷2,2 0,5÷3 2÷16 7

202+D EPIC 2-400/10 D 0,55÷7,5 0,75÷10 2÷15 9,5
203+D EPIC 2-400/15 D 7,5÷11 10÷15 16÷24 9,5
204+D EPIC 2-400/20 D 7,5÷15 10÷20 16÷30 9,5

The control panel is also available with start delta and statoric impedance starting from 1 to 300 KW

ATLANTIC POWER CONTROL S.r.l.s. Via E. Fermi, 10 - 35020 Polverara (PD) Italy - Tel +39 0495855425 - [email protected]