Scribd
Upload
69 views

ARTICULO: 0241N Fittings Inoxidable: Reducción. Stainless Steel Fittings: Reducing Socket

This document provides information on stainless steel reducing sockets from Genebre including: 1. The fittings are made of 316 stainless steel and have ANSI B 2.1 NPT threads. 2. They have dimensions according to ISO 4144 and a maximum working pressure of 20 Bar. 3. The document lists the available sizes of reducing sockets with their reference codes and dimensions in millimeters.

Uploaded by

Gerardo JM Palacios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views

ARTICULO: 0241N Fittings Inoxidable: Reducción. Stainless Steel Fittings: Reducing Socket

This document provides information on stainless steel reducing sockets from Genebre including: 1. The fittings are made of 316 stainless steel and have ANSI B 2.1 NPT threads. 2. They have dimensions according to ISO 4144 and a maximum working pressure of 20 Bar. 3. The document lists the available sizes of reducing sockets with their reference codes and dimensions in millimeters.

Uploaded by

Gerardo JM Palacios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Edificio Genebre. Av.

de Joan Carles I, 46-48


08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[email protected] - www.genebre.es

ARTICULO: 0241N
Fittings inoxidable: Reducción.
Stainless steel fittings: Reducing Socket.
Características Features
1. Construcción en Inoxidable 316 Microfusión. 1. Made of AISI 316 (Investment Casting).
2. Roscas de acuerdo a norma ANSI B 2.1 NPT. 2. Thread according to ANSI 2.1 NPT Std.
3. Dimensiones de acuerdo a norma ISO 4144. 3. Dimensions according to ISO 4144 Std.
4. Presión máxima de trabajo 20 Bar ( S-150 ). 4. Max. Working pressure 20 Bar ( S-150 ).
5. Temperatura de trabajo –20 ºC a 220 ºC. 5. Temperature ratings –20 ºC to 220 ºC.

DIMENSIONES GENERALES / GENERAL DIMENSIONS

Medida / Dimensiones /
Ref. Size ( R1 x R2 ) Dimensions (mm)
L S
0241N 02 01 1/4" x 1/8” 14,5 15
0241N 03 02 3/8” x 1/4" 16 18
0241N 04 02 1/2” x 1/4" 19,5 23
0241N 04 03 1/2” x 3/8" 19,5 23
0241N 05 03 3/4" x 3/8" 21 28
0241N 05 04 3/4" x 1/2" 21 28
0241N 06 04 1" x 1/2" 24 35
0241N 06 05 1” x 3/4" 24 35
0241N 07 05 1 1/4” x 3/4" 27 44
0241N 07 06 1 1/4" x 1” 27 44
0241N 08 06 1 1/2" x 1” 27 50
0241N 08 07 1 1/2" x 1 ¼” 27 50
0241N 09 06 2” x 1" 32 62
0241N 09 07 2” x 1 1/4" 32 62
0241N 09 08 2” x 1 1/2" 32 62
0241N 10 09 2 1/2" x 2” 34 77
0241N 11 10 3” x 2 1/2" 37,5 90
GENEBRE S.A. FECHA DE REVISIÓN: 12/06/2015 NUMERO DE REVISION: 3

You might also like