Scribd
Upload
76 views

Connecting To LAN On IITR Network

This document provides 12 steps to configure 802.1X authentication on a local area connection in Windows. It instructs the user to open Run and services.msc to start wired auto config, enable 802.1X authentication in the connection's properties, uncheck certificate validation and automatic logon, specify user authentication mode, and enter credentials including a default password of Pass123.

Uploaded by

Arighna Mitra
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
76 views

Connecting To LAN On IITR Network

This document provides 12 steps to configure 802.1X authentication on a local area connection in Windows. It instructs the user to open Run and services.msc to start wired auto config, enable 802.1X authentication in the connection's properties, uncheck certificate validation and automatic logon, specify user authentication mode, and enter credentials including a default password of Pass123.

Uploaded by

Arighna Mitra
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Step 1: Go to Start and type run in search

Step 2: Type services.msc in run command and then enter and go to standard button

1
Step 3: In standard button start the wired auto config services it should be automatic.

Step 4: Go to Control Panel and then go to Network and sharing centre and Click change adapter
setting

2
Step 5:In change adapter setting Right Click to Local Area Connection and then go to property and
then go to Authentication tab

Step 6: In authentication tab enable(check) IEEE 802.1X authentication

3
Step:7 After Enable IEEE 802.1X authentication go to setting tab

Step:8 In setting tab uncheck validate server certificate

4
Step 9 After that go to configure tab and then uncheck Automatically use my window logon

Step 10: then go to additional setting tab

5
Step 11: In additional setting tab specify authentication mode as user authentication

Step 12: then go to replace credential and type username(email id username) and password and
then press OK. Default password is Pass123

You might also like