0% found this document useful (0 votes)
102 views4 pages

Project: VN1752: Power Consumer List For Non-Process & Calculation (Estimate)

This document provides an estimate of the power consumption for various non-process areas and equipment for a project called VN1752. It lists the estimated power demands in kW and kVA for different buildings and equipment on the property including the main production building, office building, canteen, utility building, water tank, guard house, and various production equipment. The total estimated power demand is summarized for planning electrical infrastructure for the new facility.

Uploaded by

Hiei Arshavin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
102 views4 pages

Project: VN1752: Power Consumer List For Non-Process & Calculation (Estimate)

This document provides an estimate of the power consumption for various non-process areas and equipment for a project called VN1752. It lists the estimated power demands in kW and kVA for different buildings and equipment on the property including the main production building, office building, canteen, utility building, water tank, guard house, and various production equipment. The total estimated power demand is summarized for planning electrical infrastructure for the new facility.

Uploaded by

Hiei Arshavin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

Project : VN1752

POWER CONSUMER LIST FOR NON-PROCESS & CALCULATION (ESTIMATE)

Area Estimate Lux Power/unit Power (total) Power demand

Socket Simult. Power


BLD Load name Volt. Phase & Qty factor factor Remark
AC Ventil. Light.
(m²) Small Level (KW) (KVA) (KW) (KVA) (Ks) (cosj) (KW) (KVA)
W/m² W/m² W/m²
power
W/m²
1 Main production building (LP-Pro)
Ground floor
Warehouse 400/220 3&1 1,584.0 15 4 3 150-200 0.00 34.85 43.56 0.8 0.8 27.88 34.85
Production area 400/220 3&1 825.0 15 6 5 300 0.00 21.45 26.81 0.8 0.8 17.16 21.45
Battery charger 400/220 3&1 104.0 15 4 3 200 0.00 2.29 2.86 0.8 0.8 1.83 2.29
2 Office building (LP-Office)
Ground floor
Lab equipment 440/220 3&1 59.4 90 5 14 25 700 0.00 7.96 9.95 0.8 0.8 6.37 7.96
QC 400/220 3&1 28.8 70 5 10 15 500 0.00 2.88 3.60 0.8 0.8 2.30 2.88
Lab office 400/220 3&1 117.0 90 5 14 25 700 0.00 15.68 19.60 0.8 0.8 12.54 15.68
Reception waiting 400/220 3&1 32.4 70 5 6 15 300 0.00 3.11 3.89 0.8 0.8 2.49 3.11
Meeting 400/220 3&1 32.4 70 5 10 15 500 0.00 3.24 4.05 0.8 0.8 2.59 3.24
Toilet 400/220 3&1 64.8 15 4 15 200 0.00 2.20 2.75 0.8 0.8 1.76 2.20
3 Canteen and parking building (LP-Can)
Ground floor
Canteen 400/220 3&1 32.4 5 4 25 200 1 20.00 25.00 21.10 26.38 0.8 0.8 16.88 21.10
Parking building 400/220 3&1 423.0 15 4 3 150 0.00 9.31 11.63 0.8 0.8 7.44 9.31
4 Ultility building (LP-Ul)
Ground floor
Waste storage 400/220 3&1 90.0 15 4 3 200 1 2.0 2.50 3.98 4.98 0.8 0.8 3.18 3.98
Transformer room 400/220 3&1 22.5 15 2 100 0.00 0.38 0.48 0.8 0.8 0.31 0.38
MV room 400/220 3&1 24.8 15 4 2 200 0.00 0.52 0.65 0.8 0.8 0.42 0.52
LV room 400/220 3&1 47.3 15 4 2 200 0.00 0.99 1.24 0.8 0.8 0.79 0.99
Compressor room 400/220 3&1 112.5 15 6 5 300 1 2.0 2.50 4.93 6.16 0.8 0.8 3.94 4.93
5 Water tank and pump house (LP-WT)
Pump house 400/220 3&1 90.0 15 4 2 200 1 2.0 2.50 3.89 4.86 0.8 0.8 3.11 3.89
6 Gruard house (LP-GH)
Road light 400/220 3&1 10-20 32 0.2 0.25 6.40 8.00 0.8 0.8 5.12 6.40
Main door 400/220 3&1 300 1 5.0 6.25 5.00 6.25 0.8 0.8 4.00 5.00
Guard house 400/220 3&1 32.0 70 5 6 25 300 0.00 3.39 4.24 0.8 0.8 2.71 3.39
7 Production equipment (MCC)
ID (Ink Dispenser) 400/220 3&1 1 5.00 6.25 5.00 6.25 0.8 0.8 4.00 5.00
AC (Air compressor) 400/220 3&1 1 7.81 9.76 7.81 9.76 0.8 0.8 6.25 7.81
AC (Air compressor for LAB) 400/220 3&1 1 2.20 2.75 2.20 2.75 0.8 0.8 1.76 2.20
RM 01(Tri-roll mill) 400/220 3&1 1 3.00 3.75 3.00 3.75 0.8 0.8 2.40 3.00
RM 02 (Tri-roll mill) 400/220 3&1 1 2.20 2.75 2.20 2.75 0.8 0.8 1.76 2.20
Mixer 01 (Dough mixer) 400/220 3&1 1 0.18 0.23 0.18 0.23 0.8 0.8 0.14 0.18
Mixer 02 (Dough mixer) 400/220 3&1 1 1.10 1.38 1.10 1.38 0.8 0.8 0.88 1.10
Mixer 03 (Dough mixer) 400/220 3&1 1 1.80 2.25 1.80 2.25 0.8 0.8 1.44 1.80
Mixer 04 (Dough mixer) 400/220 3&1 1 0.75 0.94 0.75 0.94 0.8 0.8 0.60 0.75
Mixer 05 (High speed disperser) 400/220 3&1 1 30.00 37.50 30.00 37.50 0.8 0.8 24.00 30.00
Mixer 06 (High speed disperser) 400/220 3&1 1 22.00 27.50 22.00 27.50 0.8 0.8 17.60 22.00
Mixer 07 (High speed disperser) 400/220 3&1 1 3.75 4.69 3.75 4.69 0.8 0.8 3.00 3.75
Mixer 08 (High speed disperser) 400/220 3&1 1 45.00 56.25 45.00 56.25 0.8 0.8 36.00 45.00
Air-con 1HP 400/220 3&1 0 10.50 13.13 0.00 0.00 0.8 0.8 0.00 0.00
Air-con 2HP 400/220 3&1 0 21.00 26.25 0.00 0.00 0.8 0.8 0.00 0.00
Charger forklift PD 400/220 3&1 1 10.00 12.50 10.00 12.50 0.8 0.8 8.00 10.00
Charger stacker PD 400/220 3&1 1 1.20 1.50 1.20 1.50 0.8 0.8 0.96 1.20
Charger forklift WH 400/220 3&1 1 3.60 4.50 3.60 4.50 0.8 0.8 2.88 3.60

Page 1 of 4
Area Estimate Lux Power/unit Power (total) Power demand

Socket Simult. Power


BLD Load name Volt. Phase & Qty factor factor Remark
AC Ventil. Light.
(m²) Small Level (KW) (KVA) (KW) (KVA) (Ks) (cosj) (KW) (KVA)
W/m² W/m² W/m²
power
W/m²
Scale 2ton 400/220 3&1 1 0.20 0.25 0.20 0.25 0.8 0.8 0.16 0.20
Scale 3ton 400/220 3&1 1 0.30 0.38 0.30 0.38 0.8 0.8 0.24 0.30
Oven (QC) 400/220 3&1 1 0.50 0.63 0.50 0.63 0.8 0.8 0.40 0.50
3xLabel printer (QC) 400/220 3&1 1 1.20 1.50 1.20 1.50 0.8 0.8 0.96 1.20
4xIKA mixer (QC+LAB) 400/220 3&1 1 0.30 0.38 0.30 0.38 0.8 0.8 0.24 0.30
2xUV lamp (QC+LAB) 400/220 3&1 1 0.80 1.00 0.80 1.00 0.8 0.8 0.64 0.80
4xRK Proofer (QC) 400/220 3&1 1 1.20 1.50 1.20 1.50 0.8 0.8 0.96 1.20
2xOrange Proofer (LAB) 400/220 3&1 1 0.30 0.38 0.30 0.38 0.8 0.8 0.24 0.30
Harper proofer (LAB) 400/220 3&1 1 0.05 0.06 0.05 0.06 0.8 0.8 0.04 0.05
2xWater bath memert (LAB) 400/220 3&1 1 4.00 5.00 4.00 5.00 0.8 0.8 3.20 4.00
2xGravo Proofer (LAB) 400/220 3&1 1 0.80 1.00 0.80 1.00 0.8 0.8 0.64 0.80
4xDryer (QC + LAB) 400/220 3&1 1 4.80 6.00 4.80 6.00 0.8 0.8 3.84 4.80
7xScale (QC + LAB) 400/220 3&1 1 0.42 0.53 0.42 0.53 0.8 0.8 0.34 0.42
Light box (LAB) 400/220 3&1 1 0.50 0.63 0.50 0.63 0.8 0.8 0.40 0.50
Heat seal (LAB) 400/220 3&1 1 1.00 1.25 1.00 1.25 0.8 0.8 0.80 1.00
RUB Tester (LAB) 400/220 3&1 1 0.20 0.25 0.20 0.25 0.8 0.8 0.16 0.20
COF Tester (LAB) 400/220 3&1 1 0.60 0.75 0.60 0.75 0.8 0.8 0.48 0.60
Bond strength machine 400/220 3&1 1 0.60 0.75 0.60 0.75 0.8 0.8 0.48 0.60
GC machine 400/220 3&1 1 5.00 6.25 5.00 6.25 0.8 0.8 4.00 5.00
Volumn matric KF Titrator 400/220 3&1 1 0.20 0.25 0.20 0.25 0.8 0.8 0.16 0.20
21 x High voltage light (PD&WH) 400/220 3&1 0 5.25 6.56 0.00 0.00 0.8 0.8 0.00 0.00
6 x Gate Moter (Main+PD+WH) 400/220 3&1 1 1.38 1.73 1.38 1.73 0.8 0.8 1.10 1.38
TOTAL LOAD 253.99 317.48
SPARE 20% 50.80 63.50
TOTAL AMOUNT POWER CONSUMTION 304.78 380.98 419.075316

Page 2 of 4
Connect

Feeder

(kW)
46.87

28.06

24.33

8.64

3.11

11.83

131.15

Page 3 of 4
Connect

Feeder

(kW)

253.99
50.80
304.78

Page 4 of 4

You might also like