Provide solutions for Materials preparation, testing and analysis!

2019 Catalog
 Micro Hardness Tester  Ultrasonic Flaw Detector
 Macro Vickers Hardness Tester  Ultrasonic Thickness Gauge
 Brinell Hardness Tester  Coating Thickness Gauge
 Rockwell Hardness Tester  Surface Roughness Tester
 Universal Hardness Tester  Metallographic Grinding and Polishing Machine
 Portable Leeb Hardness Tester  Metallographic Mounting Machine
 Webster Hardness Tester  Metallographic Cutting Machine
 Barcol Hardness Tester  Universal Testing Machine
 Shore Hardness Tester  Impact Testing Machine
 Hardness block  Metalurgical Microscope
 Indenter  Stereomicroscope
 Parts of Leeb Hardness Tester  Consumable

[Valid date: 2019.1.1 - 2019.12.31]

EBPu Electromechanical Equipment (Zhejiang) Co., Ltd.

 Contents

High-End Touch Screen Micro Vickers Hardness Testing System.................................................. 1

Micro Vickers Hardness Tester ..................................................................................................... 2

High-End Touch Screen Macro Vickers Hardness Tester............................................................... 3

Macro Vickers Hardness Tester .................................................................................................... 4

Standard Rockwell Hardness Tester ............................................................................................. 5

Superficial Rockwell Hardness Tester .......................................................................................... 6

Rockwell & Superficial Rockwell Hardness Tester ........................................................................ 7

Plastic Rockwell Hardness Tester .................................................................................................. 8

Brinell Hardness Tester ................................................................................................................ 8

Universal Hardness Tester ........................................................................................................... 10

Portable Leeb Hardness Tester .................................................................................................... 11

Webster Hardness Tester ............................................................................................................. 12

Barcol Hardness Tester ................................................................................................................ 12

Shore Hardness Tester ................................................................................................................. 12

Portable Rockwell Hardness Tester ............................................................................................. 13

Portable Brinell Hardness Tester ................................................................................................. 13

Portable Brinell and Rockwell Hardness Tester ............................................................................ 14

Software for Brinell Hardness Tester ............................................................................................ 14

Ultrasonic Flaw Detector .............................................................................................................. 15

Ultrasonic Thickness Gauge .......................................................................................................... 15

Coating Thickness Gauge .............................................................................................................. 16

Surface Roughness Tester .......................................................................................................... 17

Metallographic Grinding and Polishing Machine .......................................................................... 18

Metallographic Mounting Machine .............................................................................................. 20

Metallographic Cutting Machine .................................................................................................. 21

Servo-Motor Control Universal Testing Machine .......................................................................... 22

Hydraulic Control Universal Testing Machine ............................................................................... 23

Impact Testing Machine ............................................................................................................... 23

Inverted Metalurgical Microscope .............................................................................................. 25

Upright Metalurgical Microscope ................................................................................................ 26

Stereomicroscope ........................................................................................................................ 27

Camera & Adapter ...................................................................................................................... 28

Standard Hardness Block ............................................................................................................ 29

Hardness Indenter ....................................................................................................................... 35

Parts of Leeb hardness tester ...................................................................................................... 36

Cutting Disc .................................................................................................................................. 37

Mounting Press Powder .............................................................................................................. 40

Mounting Press Mold .................................................................................................................. 42

Abrasive Paper ............................................................................................................................. 44

Diamond Spray Polishing Agent ................................................................................................... 47

Polishing Cloth ............................................................................................................................. 47

Polishing Lubricating Coolant ...................................................................................................... 49

Anti-stick Disk .............................................................................................................................. 49

Magnetic Disk .............................................................................................................................. 49

 High-End Touch Screen Micro Vickers Hardness Testing System
Name Model Photo Brief Introduction
1. Automatic turret;

2. Fully automatic: Automatic X-Y move and auto focus;

Intelligent Fully Automatic 3. Touch screen computer with hardness analysis software,
Micro Vickers Hardness DVKS-1XYZ-I
Testing System generate hardness report automatically;

4. Machine can connect with internet, printer and computer

mouse, operation very easy

1. Hardness tester and computer is seperated; Automatic

Turret with 1 piece of HV indenter and 2 pieces of objective

Intelligent Fully Automatic
Micro Vickers Hardness DVS-1XYZ lens; 2. Fully automatic: Automatic X-Y move and auto focus;
Testing System
3. On computer can do hardness analysis, generate hardness

report automatically;

1. Turret with 1 piece of HV indenter and 2 pieces of objective

lens;
Intelligent Semi - Automatic 2. Automatic X-Y move and manual focus;
Micro Vickers Hardness DVS-1XY
Testing System 3. Computer and hardness tester are seperated; computer

with hardness analysis software, generate hardness report

automatically;

1. Turret with 1 piece of HV indenter and 2 pieces of objective

lens;
Intelligent Digital Micro
DVS-1AT 2. X-Y test table with digital meter head; Manual focus;
Vickers hardness tester
3. Touch screen computer with hardness analysis software

4. Built-in camera

1. Turret with Knoop indenter & Vickers indenter, and 4 pieces

of objective lens (10X, 20X, 40X, 40X);

6 Positions Turret Digital
Micro Vickers Knoop DVKS-1A-6 2. Automatic turret, with hardness conversion function;
hardness tester
3. Automatic measuring version software, generate hardness

report automatically;

-1-
 Micro Vickers Hardness Tester (10gf - 1000gf)
Name Model Photo Brief Introduction
1. With Micro Vickers indenter and Knoop indenter, 4 pieces of
6 Positions Turret Digital objective lens (10X, 20X, 40X, 40X)
Micro Vickers Knoop DVK-1A-6 2. With hardness conversion function
Hardness Tester 3. Motorized turret, Test force: 10gf - 1000gf
4. With NG-OK judgement function
1. Automatic turret, With 8 inch touch screen
Multi-functions Motorized 2. With hardness conversion, and with HV / HK test function
Turret Touch Screen Digital 3. With NG-OK judgement function
DV-1AT-8P
Micro Vickers Hardness 4. Digital eyepiece with encoder 5. With RS232 interface
Tester 6. 10X & 40X objective lens all can do measure work.
7. Self-checking function of turret
1. Automatic turret, With 8 inch touch screen
Multi-functions Motorized 2. With hardness conversion, and with HV / HK test function
Turret Touch Screen Digital 3. With NG-OK judgement function
DV-1AT-8
Micro Vickers Hardness 4. Digital eyepiece with encoder
Tester 5. 10X observe & 40X measure
6. Self-checking function of turret
1. Manual turret, With 8 inch touch screen
Multi-functions Manual 2. With hardness conversion, and with HV / HK test function
Turret Touch Screen Digital 3. With NG-OK judgement function
DV-1MT-8P
Micro Vickers Hardness 4. Digital eyepiece with encoder 5. With RS232 interface
Tester 6. 10X & 40X objective lens all can do measure work.
7. Self-checking function of turret
1. Automatic turret, With 8 inch touch screen
Multi-functions Manual 2. With hardness conversion, and with HV / HK test function
Turret Touch Screen Digital 3. With NG-OK judgement function
DV-1MT-8
Micro Vickers Hardness 4. Digital eyepiece with encoder
Tester 5. 10X observe & 40X measure
6. Self-checking function of turret
1. Automatic turret shift (Objective - indenter shift by motor)
2. With optical path for add CCD camera (optional)
Motorized Turret Micro
V-1A 3. Hardness conversion function
Vickers Hardness Tester
4. Manual eyepiece without encoder
5. With HV / HK test function

-2-
 Name Model Photo Brief Introduction
1. Manual turret shift (Objective - indenter shift by hand)
2. With optical path for add CCD camera (optional)
Manual Turret Micro Vickers
V-1M 3. Hardness conversion function
Hardness Tester
4. Manual eyepiece without encoder
5. With HV / HK test function

1. Including software CD, dongle, 1.3M pixel /3M pixel CCD

HV hardness measuring camera, and data line (HVS-M is manual measuring version)
HVS-M
2. Report including indentation image, depth, curve, hardness
software HVS-A
value, etc.
3. Suitable for Vickers hardness tester, Knoop hardness tester

1. Including software CD, dongle, 1.3M pixel CCD camera,and

HV hardness measuring data line,suitable work with 8 inch touch screen series machine
THVS-A
software 2. Can control machine turret
3. Generate hardness report, support auto/manual measure

High-End Touch Screen Macro Vickers Hardness Tester

Name Model Photo Brief Introduction
1. Motorized X-Y test table, automatic XY axis moving and
atomatic focus (X-Y-Z full automatic)
2. With 1piece of HV indenter and 3 pieces of objective lens
4 Positions Motorized DVS-5XYZ
(10X, 20X, 40X) 3.With panel computer and 1.3M pixel CCD
Turret Intelligent Full DVS-10XYZ
camera 4.Auto measuring version software, automatically
Automatic Macro DVS-30XYZ
save the measuring data, generate the hardness-depth curve
Vickers Hardness Tester DVS-50XYZ
and save as WORD or EXCEL document.
5. With USB, VGA and LAN interfaces, the hardness
measurement can be print out by USB interface
1. Integrated design of hardness tester and panel computer,
with 1 piece of HV indenter 3 pieces of objective lens
(10/20/40X); 2. With CCD image acquisition system
4 Positions Motorized DVS-5AT
3. With auto measuring software, generate test report in Excel
Turret Intelligent Touch DVS-10AT
/ word format (indentation image, curve, depth, hardness
Screen Digital Macro DVS-30AT
value, etc) 4. Digital head type X-Y test table
Vickers Hardness Tester DVS-50AT
5. Test force: DVS-10AT: 0.2, 0.3, 0.5, 1, 2, 2.5, 3, 5, 10kgf
DVS-30AT: 0.3, 0.5, 1, 2, 2.5, 3, 5, 10, 20, 30kgf
DVS-50AT: 0.5, 1, 2, 2.5, 3, 5, 10, 20, 30, 50kgf
1. Test force: DV-10ALT: 0.3, 0.5, 1, 2, 3, 5, 10kgf
DV-30ALT: 0.5, 1, 2, 3, 5, 10, 20, 30kgf
DV-50ALT: 1, 2, 3, 5, 10, 20, 30, 50Kgf
Multi-functions
DV-100ALT: 5, 10, 20, 30, , 50, 100Kgf
Motorized Turret Touch DV-100ALT
2. Closed loop, adopted high accuracy load cell instead of
Screen Digital Macro DV-10/30/50ALT
dead weights, no need to intall weights, easy operation
Vickers Hardness Tester
3. Touch screen, menu structure, with hardness conversion
4. Test range: 8-2900HV
5. Test result can save to USB flash directly
-3-
 Macro Vickers Hardness Tester 5kgf/10kgf/30kgf/100kgf
Name Model Photo Brief Introduction
1. Digital eyepiece with built-in encoder
2. Automatic turret, 8 inch touch screen
Multi-functions DV-5AT-8P 3. With built-in printer and RS232 port
Motorized Turret Touch DV-10AT-8P
4. Test force: DV-5AT-8P: 0.3/0.5/1/2/3/5kgf
Screen Digital Macro DV-30AT-8P
Vickers Hardness Tester DV-50AT-8P DV-10AT-8P: 0.3/0.5/1/3/5/10kgf
DV-30AT-8P: 1/3/5/10/20/30kgf
DV-50AT-8P: 1/5/10/20/30/50kgf
1. Digital eyepiece with built-in encoder
2. Manual turret, 8 inch touch screen
Multi-functions Manual DV-5MT-8P 3. With built-in printer and RS232 port
Turret Touch Screen DV-10MT-8P
4. Test force: DV-5MT-8P: 0.3/0.5/1/2/3/5kgf
Digital Macro Vickers DV-30MT-8P
Hardness Tester DV-50MT-8P DV-10MT-8P: 0.3/0.5/1/3/5/10kgf
DV-30MT-8P: 1/3/5/10/20/30kgf
DV-50MT-8P: 1/5/10/20/30/50kgf
1. Digital eyepiece with built-in encoder

Multi-functions DV-5AT-8 2. Automatic turret, 8 inch touch screen

Motorized Turret Touch DV-10AT-8 3. Test force: DV-5AT-8: 0.3/0.5/1/2/3/5kgf
Screen Digital Macro DV-30AT-8 DV-10AT-8: 0.3/0.5/1/3/5/10kgf
Vickers Hardness Tester DV-50AT-8 DV-30AT-8: 1/3/5/10/20/30kgf
DV-50AT-8: 1/5/10/20/30/50kgf
1. Digital eyepiece with built-in encoder

Multi-functions Manual DV-5MT-8 2. Manual turret, 8 inch touch screen

Turret Touch Screen DV-10MT-8 3. Test force: DV-5MT-8: 0.3/0.5/1/2/3/5kgf
Digital Macro Vickers DV-30MT-8 DV-10MT-8: 0.3/0.5/1/3/5/10kgf
Hardness Tester DV-50MT-8 DV-30MT-8: 1/3/5/10/20/30kgf
DV-50MT-8: 1/5/10/20/30/50kgf

Adapter lens of CCD 1. Both end with screw (suitable for standard 1’’ C mount)
AL-0.5X
camera 2. 0.5X magnification

Standard C mount for fix CCD camera on hardness tester or

Microscope
C mount adapter A32CCD
Screw diameter 25.4mm
Screw distance: 25.4/32

1. 1.3M piexl / 3M pixel

CCD camera CCD310
2. Suitable for hardness tester / Microscope

-4-
 Standard Rockwell Hardness Tester
Name Model Photo Brief Introduction
1. Full automatic Rockwell hardness tester, just press ‘start’
key, then machine working automatically
Intelligent Fully 2. With Rockwell test function, main test force: 60,100,150Kgf
Automatic Rockwell R-150AT 3. With hardness conversion function (based on ASTM)
hardness tester 4. Touch screen, menu structure, easy operation
5. Close loop structure, load cell instead of weights
6. Test data can save to U-flash
1. Touch screen, menu structure, easy operation
2. Nose mounted indenter, special for test ring shape material,
tubular material, etc
High-end Digital
3. Closed loop, load cell, no need to install weights
Rockwell hardness R-150NT
4. Test data can export to U disk in EXCEL format, for long time
tester
keep and easy editing and processing.
5. With hardness conversion function (based on ASTM)
6. With Rockwell test function, main test force: 60,100,150Kgf

1. Close loop, touch screen, menu structure, easy operation

2. With hardness conversion function
Touch Screen Digital
3. Test force error ＜0.5%
Rockwell hardness R-150DT
tester 4. Upper - Lower limit, automatic alarm
5. Test data can export to U disk
6. Main test force: 60, 100, 150Kgf

1. With 8 inch touch screen, menu structure, easy operation

2. With hardness value and force calibration function
Touch Screen Digital 3. With hardness conversion function
Rockwell hardness R-150T 4. With built-in printer and RS232 interface (or USB interface)
tester 5. Can save 60 pieces of test data
6. After purchase our software, can connect with computer
7. Main test force: 60, 100, 150Kgf

1. Test space: 400*160mm (H*D)

2. With 8 inch touch screen, menu structure, easy operation
Increased height type 3. With hardness value and force calibration function
Touch Screen Digital 4. With hardness conversion function
R-150HT
Rockwell hardness 5. With built-in printer and RS232 interface (or USB interface)
tester (400mm) 6. Can save 60 pieces of test data
7. After purchase our software, can connect with computer
8. Main test force: 60, 100, 150Kgf

-5-
 Name Model Photo Brief Introduction

1. Initial test force: 10kgf, main load: 60/100/150kgf

2. Resolution: 0.1HR
Digital Rockwell
R-150D 3. Hardness scales: HRA, HRB, HRC, HRD, HRE, HRF, etc.
hardness tester
4. With hardness conversion scale
5. Digital LCD screen, built-in printer

1. Initial test force: 10kgf, main load: 60/100/150kgf

Motorized Rockwell
R-150E 2. Resolution: 0.5HR
hardness tester
3. Hardness scales: HRA, HRB, HRC

1.Initial test force: 10kgf, main load: 60/100/150kgf

Manual Rockwell 2.Resolution: 0.5HR
R-150M
hardness tester 3. Hardness scales: HRA, HRB, HRC
4. Manual type, no need power supply

Superficial Rockwell Hardness Tester

Name Model Photo Brief Introduction

1. Full automatic, just press ‘start’ key, then machine working

Intelligent Fully automatically 2. Main test force: 15, 30, 45Kgf
Automatic Superficial 3.With hardness conversion function (based on ASTM)
R-45AT
Rockwell hardness 4.Touch screen, menu structure, easy operation
tester 5. Close loop structure, load cell instead of weights
6. Test data can save to U-flash

1. Touch screen, menu structure, easy operation

2. Nose mounted indenter, special for test ring shape material,
tubular material, etc
High-end Digital
3. Closed loop, load cell instead of dead weights
Superficial Rockwell R-45NT
4. Test data can export to U disk in EXCEL format, for long time
hardness tester
keep and easy editing and processing.
5. With hardness conversion function (based on ASTM)
6. With Rockwell test function, main test force: 15, 30, 45Kgf

-6-
 Name Model Photo Brief Introduction

Digital Touch screen 1. Touch screen, menu structure, easy operation

Superficial Rockwell R-45T 2. Main test force: 15, 30, 45Kgf
hardness tester 3. With hardness conversion function (based on ASTM)

Rockwell & Superficial Rockwell Hardness Tester

Name Model Photo Brief Introduction
1. Full automatic hardness tester, just press ‘start’ key, then
machine working automatically
Intelligent Fully 2. With Rockwell & superficial Rockwell test function
Automatic Rockwell & 3. With hardness conversion function (based on ASTM)
RSR-150AT 4. Touch screen, menu structure, easy operation
Superficial Rockwell
hardness tester 5. Close loop structure, load cell instead of weights
6. Test data can save to PC
7. Main test force: 15, 30, 45, 60, 100, 150Kgf

1. Touch screen, menu structure, easy operation

High-end Digital 2. Closed loop, load cell, no need to install weights

Rockwell and 4. Test data can export to U disk in EXCEL format, for long time
RSR-45/150D
superficial Rockwell keep and easy editing and processing.
hardness tester 5. With hardness conversion function (based on ASTM)
6. Main test force: 15, 30, 45, 60, 100, 150Kgf
1. Touch screen, menu structure, easy operation
2. Nose mounted indenter, special for test ring shape material,
High-end Digital tubular material, etc
Rockwell and 3. Closed loop, load cell, no need to install weights
RSR-150NT
superficial Rockwell 4. Test data can export to U disk in EXCEL format, for long time
hardness tester keep and easy editing and processing.
5. With hardness conversion function (based on ASTM)
6. Main test force: 15, 30, 45, 60, 100, 150Kgf

Electric Rockwell and 1. Read data from dial, with Rockwell & superficial Rockwell
superficial Rockwell RSR-45/150E 2. Main load driven by motor
hardness tester 3. Load: 15, 30, 45, 60, 100, 150Kgf

Manual Rockwell and 1. Read data from dial, with Rockwell & superficial Rockwell
superficial Rockwell RSR-45/150M 2. No need electric power supply, operate by manual
hardness tester 3. Load: 15, 30, 45, 60, 100, 150Kgf

-7-
 Plastic Rockwell Hardness Tester
Name Model Photo Brief Introduction
1. It can test hard plastic or rubber material
2. With 8 inch touch screen, menu structure, easy operation
3. With hardness value and force calibration function
Touch Screen Digital
4. With hardness conversion function
Plastic Rockwell R-150TP
5. With built-in printer and RS232 interface (or USB interface)
hardness tester
6. Can save 60 pieces of test data
7. After purchase our software, can connect with computer
8. Main test force: 60, 100, 150Kgf

1. Suitable test hard plasctic or rubber material

Motorized Plastic 2. Automatic loading - hold load - unload test force
Rockwell hardness R-150EP 3. Resolution: 0.5HR
tester 4. Test force: 60, 100, 150Kgf
1. Read hardness value from dial

Brinell Hardness Tester

Name Model Photo Brief Introduction
1. With 3 pieces of indenters and 2 pieces of objectives, all can
be used for measurement
2. With built-in touch screen panel computer, after select the
scale, the instrument will automatically select the indenter and
objective
3. The test table rises automatically and then back to the
Intelligent Full
Automatic Digital focusing position after loading the test force, it shows the clear
Brinell hardness tester B-3000AT-5 image of the indentation and automatically measures
with Five Position 4. Automatic turret, and with hardness conversion function,
Turret
With 10 steps test force and 13 kinds of Brinell scales
5. With software and CCD camera system, test result can save
as Word / Excel format document
6. With USB port, VGA interface and network interface, it can
connect to the internet or other devices for more optional
functions

-8-
 Name Model Photo Brief Introduction
1. With 3pieces of indenter and 2 pieces of objectives, all can
be used for measurement
Touch screen Digital
Brinell hardness tester 2. Touch screen, menu structure, easy operation
B-3000DT-5
with Five Position 3. Automatic turret, and with hardness conversion function
Turret
4. With 10 steps test force and 13 kinds of Brinell scales
5. Closed loop, adopted high accuracy load cell

1. Touch screen, menu structure, easy operation

2. Test space: 400*135mm (H*D)

Touch Screen 3. Test data can save to USB flash in Excel format
Motorized Turret Digital B-3000AT 4. Test force with automatic correct function, test result more
Brinell hardness tester accuracy
5. Closed loop with load cell, test force from 62.5kgf to
3000kgf.

1. Touch screen, menu structure, easy operation

2. Test space: 400*135mm (H*D)
Touch Screen Manual
3. Test data can save to USB flash in Excel format
Turret Digital Brinell B-3000MT
4. Test force with automatic correct function, test result more
hardness tester
accuracy 5. Closed loop with load cell, test force from 62.5kgf
to 3000kgf.

1. Touch screen, menu structure

2. Manual input D1, D2, machine calculate hardness value
Digital Electronic Brinell automatically, no need to check hardness table
B-3000D
hardness tester 3. Closed loop with load cell, test force from 62.5kgf to
3000kgf.
4. Automatic load - dwell - unload main test force.

4. Touch screen, menu structure

5. Manual input D1, D2, machine calculate hardness value
Increased height type
automatically, no need to check hardness table
Digital Electronic Brinell B-3000HD
6. Closed loop with load cell, test force from 62.5kgf to
hardness tester 400mm
3000kgf.
4. Automatic load - dwell - unload main test force.

1. Touch screen, menu structure, easy operation

Low load Touch Screen 2. With hardness conversion function
Digital Brinell hardness B-62.5AT 3. Test space: 180*160mm (H*D)
tester 4. Test data can save to USB flash in Excel format
5. Closed loop with load cell, test force from 1 kgf to62.5kgf.

-9-
 Universal Hardness Tester
Name Model Photo Brief Introduction
1. Close loop, with high accuracy load cell

Touch screen Digital Brinell, 2. Touch screen, menu structure, easy operate
Rockwell and Vickers BRV-187.5S 3. With Brinell, Rockwell & Vickers test function
hardness testing system 4. With software system, measuring on PC, and do analysis
work and generate test report

1. With Brinell, Rockwell & Vickers test function

Increased height type 2. Magnification: 37.5X, 75X

Digital Brinell, Rockwell and BRV-187.5DH 3. Max. Height of Specimen: Rockwell: 400mm, Brinell:
Vickers hardness tester 330mm, Vickers: 345mm; Throat depth: 165mm
4. With hardness conversion function, LCD screen

1. Close loop, with high accuracy load cell

2. Touch screen, menu structure, easy operate

Touch screen Digital Brinell, 3. With HV, HR, HB test function: HB: 5-187.5; HV: 5-120; HR:
Rockwell and Vickers BRV-187.5T HRA, HRB, HRC, HRD, etc.
hardness tester 4. With hardness conversion function
5. Test data can export to U disk in EXCEL format, for long time
keep and easy editing and processing.
1. With HV, HR, HB test function
2. Test force of HV: 30, 100kgf;
HB: 30, 31.25, 62.5, 100, 187.5kgf;
Digital Brinell, Rockwell and
BRV-187.5E HR: 60, 100, 150kgf
Vickers hardness tester
3. Read test data from dial
Test space: 1) Height: Rockwell: 175 ; Brinell: 100mm;
Vickers: 115mm; 2) Depth: 165mm

- 10 -
 Portable Leeb Hardness Tester
Name Model Photo Brief Introduction

1. With plastic shell body

2. Hardness scale: HL, HB, HRB, HRC, HRA, HV, HS
Portable Leeb hardness
L-1 3. Accuracy: ±6HLD (D impact device)
tester
Measuring Direction: 360°
4. Data Memory: 600 groups

1. With aluminum body shell

2. Hardness scale: HL, HB, HRB, HRC, HRA, HV, HS
Portable Leeb hardness
L-2 3. Accuracy: ±6HLD (D impact device)
tester
Measuring Direction: 360°
4. Data Memory: 600 groups
1. With printer, print test data directly,
hardness scale: HL, HB, HRB, HRC, HRA, HV, HS
Portable Leeb hardness 2. Accuracy: ±6HLD (D impact device)
L-3
tester 3. Measuring Direction: 360°
4. Data Memory: 600 groups
5. With PC software
1. Color screen, hardness scale: HL, HB, HRB, HRC, HRA, HV, HS
2. Accuracy: ±6HLD (D impact device)
Portable Leeb hardness
L-4 3. Measuring Direction: 360°
tester
4. Data Memory: 600 groups
5. With PC software
1. Color screen, metal machine body
2. Hardness scale: HL, HB, HRB, HRC, HRA, HV, HS, with
Portable Leeb hardness
L-4S hardness conversion function 3. Measuring Direction: 360°
tester
4. Data Memory: 600 groups
5. With PC software
1. Color screen with printer, hardness scale: HL, HB, HRB,
HRC, HRA, HV, HS
Portable Leeb hardness 2. Accuracy: ±6HLD (D impact device)
L-5
tester Measuring Direction: 360° 3. Data Memory: 600 groups
4. With PC software 5. With customized materials function,
with Strength (σb) mode

L-5S L-5S: No key and menu, can store 270 pcs test data, D prob
Pen type Leeb hardness
L-5 Pro L-5Pro: with key and menu, support any angle test, D prob
tester
L-5 Plus L-5Plus: with key and menu, support any angle test, DL prob

- 11 -
 Portable Shore Hardness Tester

1. Measuring range: 0-100HA

Digital Shore Hardness
SH-A 2. Pressure needle range: 2.5mm
Tester A
3. End pressure of Pressure head: Φ0.79mm

1. Measuring range: 0-100HC

Digital Shore Hardness
SH-C 2. Pressure needle range: 2.5mm
Tester C
3. End pressure of Pressure head: SR2.5mm

1. Measuring range: 0-100HD

Digital Shore Hardness
SH-D 2. Pressure needle range: 2.5mm
Tester D
3. End pressure of Pressure head: SR0.1mm

Portable Webster Hardness Tester

Name Model Photo Brief Introduction
1. Range: 0-20 HW (the equivalent of 20-110 HRE)
2. Indicator Error: 0.5 HW (5 -17 HW)
Webster hardness tester for 3. Repeatability Error: 0.5 HW (5 -17 HW)
W-20A
aluminum Weight: 0.5 kg
5. used to test the hardness value of aluminum alloy, pipe,
plate, aluminum parts, and other soft metals

1. Used to test the hardness value of brass alloy.

Range: 0-20 HW (the equivalent of 53-92 HRB, the
Webster hardness tester W-20B equivalent of 87-109 HRF) 3. Indicator Error: 0.5 HW (5
-17 HW) 4. Repeatability Error: 0.5 HW (5 -17 HW)
5.Weight: 0.5 kg

Portable Barcol Hardness Tester

1. Test Range: 0-100 HBa

2. Effective Range: 35-90 HBa(equivalent to 25-150 HBW)

Barcol Hardness Tester BP-100 3. Sample thickness Requirements: >0.8 mm

4. Used for rapid hardness test for aluminum and

aluminum alloy, as well as fiberglass reinforced plastic.

- 12 -
 Portable Rockwell Hardness Tester

1. With HRA, HRB, HRC test function

2. Testing range: 20~88HRA, 20~100 HRB, 20~70 HRC
Portable Digital Magnetic 3. Applied to test very large or heavy iron and steel parts
PR-150D
Rockwell Hardness Tester 4. It is fixed onto the surface of a iron and steel part
smartly with magnetic chucks
5. With digital LCD screen

1. With HRA, HRB, HRC test function

2. Testing range: 20~88HRA, 20~100 HRB, 20~70 HRC
Portable Manual Magnetic
PR-150M 3. Applied to test very large or heavy iron and steel parts
Rockwell Hardness Tester
4. It is fixed onto the surface of a iron and steel part
smartly with magnetic chucks 5. Result read from dial
1. Total test force: 60kg,100kg,150kg
2. Indication error: Complying with ISO 6508 and
ASTME18
Portable Rockwell Hardness
R-150P 3. Repeatability error: Complying with ISO6508 and ASTM
Tester
E18
4. Test resolution: 0.5HR
5. Test range: HRA,HRB,...HRV etc,15 scales.

Portable Brinell Hardness Tester

1. Test Force 1,580 kgf
2. Indenter: 7.26mm & 4mm Ball Indenter,
Hammer Impact Brinell
B-1580P 3. Test range 100~650HBW
Hardness Tester
4. Application: Castings, Forgings, Steel Products, Heat
Treatment

1. Test Force: 3000kgf(1000kgf, 750kgf, 500kgf optional)

2. Test Ball: 10mm Carbide test ball (5mm optional)
Portable Hydraulic Brinell 3. Test Range: 32-650HBW
B-3000P
Hardness Tester 4. Opening Dimension: 350mm( Height)*100mm(Throat
depth)
5. Indicator Error: Complies with ISO 6506, and ASTM E10

1. Net weight: 5kg; Gross weight: 14kg

2. Initial Test Force: 10kgf
3. Total Test Force : 60 kgf, 100 kgf, 150 kgf, 187.5 kgf
4. Testing Range: 20~88HRA, 20~100 HRB, 20~70 HRC,
Portable Magnetic Brinell
B-187.5P 150~ 400 HBW
hardness tester
5. Dimension: Flat : Area ≥ 195mm x 60 mm
Thickness : ≥ 5 mm
Cylinder: Diameter ≥ 60 mm Length ≥ 200 mm,
thickness ≥ 8 mm

- 13 -
 Portable Brinell and Rockwell Hardness Tester
1. Initial Test Force: 10kgf
2. Total Test Force : 60 kgf, 100 kgf, 150 kgf, 187.5 kgf
3. Testing Range: 20~88HRA, 20~100 HRB, 20~70 HRC,
Portable Magnetic Digital
150~ 400 HBW
Brinell and Rockwell BR-187.5DP
4. Testing Resolution: 0.1 HR or 1 HBW
hardness tester
5. Total weight 5.3kg of the tester, it is the smallest
Magnetic Digital Brinell and Rockwell hardness tester so
far.
1. Total Test Force for Rockwell: 60kgf, 100kgf, 150kgf
Total Test Force for Brinell: 62.5kgf, 125kgf, 187.5kgf
Portable Magnetic Brinell
2. Test range: Rockwell: HRA, HRB, HRC; Brinell:
and Rockwell hardness BR-187.5P
16~650HBW
tester
3. It can test any dimension parts, especially steel tubes
and weld on pipes.

Software for Brinell Hardness Tester

1. Including software CD, dongle, 1.3M / 3M pixel CCD
HBS-M camera, and data line 2. Report including indentation
HB hardness measuring image, depth, curve, hardness value, etc. 3. Suitable for
software HBS-A Brinell hardness tester which with eyepiece or optical path
4. HBS-M is manual measuring version; HBS-A is automatic
measuring version
1. Including portable CCD camera, software CD, dongle,
HB hardness measuring and data line 2. Report including indentation image,
HBS-P
software (portable type) depth, curve, hardness value, etc. 3. Suitable for
Brinell hardness tester

Measurement microscope 1. Used to measure the diameter length of Brinell

HBM-20 indentation
20X 2. Magnification 20X

- 14 -
 Ultrasonic Flaw Detector

Name Model Photo Brief Introduction

1. One Function Key, Easily Operate
2. Auto Calibration: Velocity, Probe Delay, Angle/K Value
Mini Ultrasonic Flaw
EFD-100 3. B Scan-Display Flaws Directly
Detector
4. 100,000 pcs Data Memory
5. Measuring Range: 1.0~6000mm
1. Measuring Range:1.0~10000mm
2. Measurement mode: single, dual, THRU
Ultrasonic Flaw Detector EFD-200 3. Frequency range: 0.5-20MHz;
4. With B scan and Peak Hold and Peak Memory function
5. Make video: The cycle of 5 minutes and wirh PC software
1. Measuring Range: 1.0-10000mm
2. With automatic calibration function (two hole)
3. Support make video (unlimited time) and with PC software
Ultrasonic Flaw Detector EFD-300
4. Can connect with U-flash, save data more easy
5. With B scan and Peak Hold and Peak Memory function
6. With 28 DGS curves
1. Measuring Range: 1.0~1200mm
2. USB for storage Plug and play
3. B Scan-Display Flaw Directly
4. 200,000 values/5 min video data Memory
Ultrasonic Flaw Detector EFD-400
5. 5 Intelligent DAC curves , comply to JIS and API standard
6. Magnalium alloy coated, AP65 encapsulation, strong and
durable , avoiding electro-magnetic interference
7. Display screen could be adjusted to provide 5 optimum

Ultrasonic Thickness Gauge

Name Model Photo Brief Introduction

1. With automatic calibration function
2. Detection range: 0.75-400mm (normal mode)
3. Resolution: 0.1mm(> 100mm)/0.01mm(<100mm)
Ultrasonic Thickness Guage UT-100
4. Frequency bandwidth: 0.5-15MHz
5. Battery: 1.5V AAA x 4
6. Storage Capacity: 100 groups

- 15 -
 Name Model Photo Brief Introduction

1. Detection range: 0.75-400mm (normal mode)

2. Resolution: 0.1mm(> 100mm)/0.01mm(<100mm)
Ultrasonic Thickness Guage UT-200 3. Frequency bandwidth: 0.5-15MHz
4. Battery: 1.5V AAA x 4; USB communication
5. Storage Capacity: 500 groups

1. Penetrate the coating : 2-25mm

2. Detection range: 0.75-400mm (normal mode)
3. Resolution: 0.1mm(> 100mm)/0.01mm(<100mm)
Ultrasonic Thickness Guage UT-300
4. Frequency bandwidth: 0.5-15MHz
5. Battery: 1.5V AAA x 4; USB communication
6. Storage Capacity: 1000 groups

Coating Thickness Gauge

Name Model Photo Brief Introduction

1. Measuring range: 0-1250μm (based on prob)
2. Substrate: F or N
Coating Thickness Guage CT-100 3. Resolution: 0.1μm
4. Memory: 5 group x 100 values
5. Battery: AA battery 2pcs

1. Prob: F
Coating Thickness Guage CT-200 2. Resolution: 0.1μm (0-99.9μm); 1μm (over 100μm)
3. 1.5V Commercial NiMH / alkaline batteries

1. Prob: N
Coating Thickness Guage CT-300 2. Resolution: 0.1μm (0-99.9μm); 1μm (over 100μm)
3. 1.5V Commercial NiMH / alkaline batteries

1. Prob: N and F
Coating Thickness Guage CT-400 2. Resolution: 0.1μm (0-99.9μm); 1μm (over 100μm)
3. 1.5V Commercial NiMH / alkaline batteries

- 16 -
 Surface Roughness Tester

Name Model Photo Brief Introduction

1. Measurement Parameters(µm): Ra Rz Rq Rt
2. Stroke Length (mm): 6
3. Sampling Length (mm): 0.25 , 0.80 , 2.50
Surface Roughness Tester SR-100
4. Evaluation Length (mm): 1.25 , 4.0
5. Measurement Range (µm)
Ra: 0.05 ~ 10.0; Rz: 0.1 ~ 50
1. Measurement Parameters(µm): 9 kinds
2. The maximum driving trip : 17.5mm/0.7inch
Coating Thickness Guage SR-200 3. Sampling Length (mm): 0.25 , 0.80 , 2.50, 8
4. Evaluation Length (mm): 1-5
5. Measurement Range (µm) Ra: 0.05 ~ 16; Rz: 0.02 ~ 160
1. Measurement Parameters(µm): 19 kinds.
2. The maximum driving trip : 17.5mm/0.7inch
3. Sampling Length (mm): 0.25 , 0.80 , 2.50, 8
Coating Thickness Guage SR-300
4. Evaluation Length (mm): 1-5
5. Measurement Range (µm): Ra: 0.05 ~ 16; Rz: 0.02 ~ 160
6. With communication software
1. Measurement Parameters(µm): Ra, Rq, Rz, R3z, Ry, Rt, Rp,
Rm, Sk, S, Sm, tp
2. Measuring Range: Z-axis (vertical): 160mm; X-axis
(horizontal): 17.5mm.
Coatin Thickness Guage SR-400 3. Graph: Supporting curve, roughness profile, direct contour
4. Sampling Length (mm): 0.25, 0.8, 2.5mm
5. Evaluation Length (mm): Ln=lr×n; n=1~5
6. With communication software
7. Standard: ISO, ANSI, DIN, JIS

- 17 -
 Metallographic Grinding and Polishing Machine
Name Model Photo Brief Introduction
1. Pneumatic metallographic grinding and polishing
machine, single disc
2. With automatic head, speed: 5-150r/min (stepless)
Metallographic Sample
3. With digital touch screen, menu structure, easy
grinding and polishing GP-1AT
operation 4. With water cooling system
Machine
5. Diameter of Grinding/polishing Disc: 250mm
6. Disc Rotating Speed: 50-1000r/min or
200/600/800/1000r/min
1. Single disc, used for grinding and polishing
2. Automatic polishing / grinding head controlled by
Metallographic Sample motor 3. With water cooling system
grinding and polishing GP-1AE 4. Diameter of Grinding/polishing Disc: 250mm
Machine 5. Disc Rotating Speed: 50-1000r/min or
300/600/900r/min 6. Grinding/polishing head
rotating speed: 5-100r/min (stepless)
1. Pneumatic metallographic grinding and polishing
machine, double disc
2. With automatic head, speed 5-150r/min (stepless)
Metallographic Sample
3. With digital touch screen, menu structure, easy
grinding and polishing GP-2AT
operation 4. With water cooling system
Machine
5. Diameter of Grinding/polishing Disc: 250mm
6. Disc Rotating Speed: 50-1000r/min or
200/600/800/1000r/min
1. Double disc, used for grinding and polishing
2. Automatic polishing / grinding head by motor
Metallographic Sample 3. With water cooling system
grinding and polishing GP-2AE 4. Diameter of Grinding/polishing Disc: 250mm
Machine 5. Disc Rotating Speed: 50-1000r/min or
300/600/900r/min 6. Grinding/polishing head
rotating speed: 5-100r/min (stepless)
1. Double disc, used for grinding and polishing
2. With water cooling system
Metallographic Sample
4. Diameter of Grinding/polishing Disc: 250mm
grinding and polishing GP-2T
5. Digital touch screen with menu structure, easy
Machine
operation 6. Grinding / polishing Speed: 99-1000r/min
(stepless) or 150/300/600/800r/min
1. Single disc, used for grinding and polishing
2. With digital touch screen, menu structure, easy
Metallographic Sample
operation 3. With water cooling system
grinding and polishing GP-1T
Machine 4. Diameter of Grinding/polishing Disc: 250mm
5. Stepless Rotating Speed: 99-1000r/min or
150/300/600/800r/min

- 18 -
 Name Model Photo Brief Introduction
1. Double disc, used for grinding and polishing
Metallographic Sample 2. With water cooling system
grinding and polishing GP-2D 4. Diameter of Grinding/polishing Disc: 203mm
Machine 5. Grinding / polishing Speed: 50-600r/min (stepless)
6. With double controller
1. Double disc, used for grinding and polishing
Metallographic Sample 2. With water cooling system
grinding and polishing GP-2C 4. Diameter of Grinding/polishing Disc: 203mm
Machine 5. Grinding / polishing Speed: 150r/min; 300r/min
6. With double controller
1. Double disc, used for grinding and polishing
Metallographic Sample 2. With water cooling system
grinding and polishing GP-2B 4. Diameter of Grinding/polishing Disc: 200mm
Machine 5. Grinding / polishing Speed: 50-1000r/min (stepless)
6. With single controller
1. Double disc, used for grinding and polishing
2. With water cooling system
Metallographic Sample
4. Diameter of Grinding/polishing Disc: 200mm
grinding and polishing GP-2
Machine 5. Grinding Speed: 450r/min;
Polishing speed: 600r/min
6. Single controller
1. Single disc, used for grinding and polishing
2. With water cooling system
Metallographic Sample
GP-1F 3. Diameter of Grinding/polishing Disc: 203mm
grinding and polishing
Machine 4. Rotating Speed: 150r/min; 300r/min
5. Disc suitable for fast change
1. Single disc, used for grinding and polishing

Metallographic Sample 2. With water cooling system

grinding and polishing GP-1B 3. Diameter of Grinding/polishing Disc: 250mm
Machine
4. Rotating Speed: 50-600r/min (Stepless)
5. Disc suitable for fast change
1. Single disc, used for grinding and polishing
Metallographic Sample
2. With water cooling system
grinding and polishing GP-1
Machine 3. Diameter of Grinding/polishing Disc: 200mm
4. Stepless Rotating Speed: 50-1000r/min

- 19 -
 Name Model Photo Brief Introduction
1. Double disc, used for grinding sample
Metallographic Sample 2. With water cooling system
G-2
Pre-grinding Machine 3. Diameter of Grinding Disc: 200mm
4. Rotating Speed: 450r/min

1. Single disc, used for grinding sample

Metallographic Sample 2. With water cooling system
G-1
Pre-grinding Machine 3. Diameter of Grinding Disc: 200mm
4. Rotating Speed: 700r/min

1. Double disc, used for polishing sample

Metallographic Sample 2. Diameter of polishing Disc: 200mm
P-2W
Polishing Machine 3. Rotating Speed: 900r/min, 1400r/min
4. With water cooling

1. Double disc, used for polishing sample

Metallographic Sample
P-2H 2. Diameter of polishing Disc: 200mm
Polishing Machine
3. Rotating Speed: 900r/min, 1400r/min

1. Double disc, used for polishing sample

Metallographic Sample
P-2 2. Diameter of polishing Disc: 200mm
Polishing Machine
3. Rotating Speed: 900r/min, 1400r/min

1. Single disc, used for polishing sample

Metallographic Sample
P-1 2. Diameter of polishing Disc: 200mm
Polishing Machine
3. Rotating Speed: 900r/min, 1400r/min

Metallographic Mounting Machine

Name Model Photo Brief Introduction
1. Touch screen with menu structure, easy operation
2. Mold Diameters: Ø25, 30, 40, 50mm (choice 2 size
Metallographic Mounting from them), same time can process 2 pieces different
MP-2AW
Machine size mold 3. Programmable, automatic UP - DOWN
4. With water cooling system, each time can process 2
pieces mold, greatly improved working efficiency
1. Touch screen with menu structure, easy operation
2. Mold Diameters: Ø25mm, Ø30mm, Ø40mm,
Metallographic Mounting Ø50mm (with 4 mold, can fast change during operate)
MP-1AW-2
Machine 3. Programmable, automatic UP - DOWN
4. With water cooling system, each time can process 2
pieces mold, greatly improved working efficiency

- 20 -
 Name Model Photo Brief Introduction
1. Touch screen with menu structure, easy operation
2. Mold Diameters: Ø22mm, Ø30mm, Ø45mm (only
Metallographic Mounting
MP-1AW can choice one size for one unit)
Machine
3. Programmable, automatic UP - DOWN
4. With water cooling system
1. Basic model, with key type controller
2. Mold Diameters: Ø22mm, Ø30mm, Ø45mm (only
Metallographic Mounting
MP-1 can choice one size for one unit)
Machine
3. Manual control UP - DOWN
4. Without water cooling system

Metallographic Cutting Machine

Name Model Photo Brief Introduction
1. Support automatic and manual operation
2. With X, Y, Z directions automatically and precisely
controlled 3. Touch screen with menu structure,
easy operation 4. Swing cutting and continuous
Metallographic Cutting
CM-4 cutting two cutting ways 5. Max. Cutting Section:
Machine
120×100 mm; 200×120 mm; 300×150 mm
6. Volume of the Water Tank: 120L
7. Feeding Speed: 3/5/8/12mm/min (users may
modify the set speed according to requirement)
1. Support automatic and manual operation
2. Closed cutting room, safety operation
3. T shape working table size: 220 or 280*300mm
4. Moving range: 230mm or 250mm
Metallographic Cutting
CM-3 5. Max. Cutting diameter: Ø5-80mm or Ø5-100mm
Machine
6. Cutting Speed: 2.25, 3, 4, 5, 7, 9, 12, 15mm/min
7. Cutting Disc size: 350 x 2.5 x 32mm
8. Cutting Disc Rotating Speed: 2100 rpm
9. With automatic water cooling system

1. Manual operation
Metallographic Cutting 2. Closed cutting room, safety operation
CM-2
Machine 3. Max. Cutting Diameter: Ø60 or Ø80 or Ø100mm
4. With automatic water cooling system

1. Manual operation
Metallographic Cutting CM-1 2. Maximum Cutting Section: 30*30mm or 50*50mm
Machine 3. Cutting Disc Size: 250*2*32mm or 300 * 2 * 32mm

- 21 -
 Servo-Motor Control Universal Testing Machine
Name Model Photo Brief Introduction

1.Single Column, max. Load 5KN.

5KN Computerized
2.Computer control, Displacement Resolution 0.01mm
Electronic Universal Tensile UTM-5
3.Test speed: 0.05-1000mm/min
Testing Machine
4.Meet ASTM & ISO standards

1.Computer control, max. Load 10KN

10kN Computer Controlled
2.Load resolution: 1/300000
Electronic Universal Tensile UTM-10
3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine
4.Load control speed: 0.01~50 kN/s
1.Computer control, max. Load 20KN
20kN Computer Controlled 2.Load resolution: 1/300000
Electronic Universal Tensile UTM-20 3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine 4.Load control speed: 0.01~50 kN/s
5.Deformation control speed: 0.002~0.5mm/s
1.Computer control, max. Load 30KN
30kN Computer Controlled 2.Load resolution: 1/300000
Electronic Universal Tensile UTM-30 3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine 4.Load control speed: 0.01~50 kN/s
5.Deformation control speed: 0.002~0.5mm/s
1.Computer control, max. Load 50KN
50kN Computer Controlled 2.Load resolution: 1/300000
Electronic Universal Tensile UTM-50 3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine 4.Load control speed: 0.01~50 kN/s
5.Deformation control speed: 0.002~0.5mm/s
1.Computer control, max. Load 100KN
100kN Computer Controlled 2.Load resolution: 1/300000
Electronic Universal Tensile UTM-100 3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine 4.Load control speed: 0.01~50 kN/s
5.Deformation control speed: 0.002~0.5mm/s
1.Computer control, max. Load 200KN
200kN Computer Controlled 2.Load resolution: 1/300000
Electronic Universal Tensile UTM-200 3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine 4.Load control speed: 0.01~50 kN/s
5.Deformation control speed: 0.002~0.5mm/s
1.Computer control, max. Load 300KN
300kN Computer Controlled 2.Load resolution: 1/300000
Electronic Universal Tensile UTM-300 3.Deformation accuracy: ≤±1% (≤±0.5% optional)
Testing Machine 4.Load control speed: 0.01~50 kN/s
5.Deformation control speed: 0.002~0.5mm/s

- 22 -
 Hydraulic Control Universal Testing Machine
Name Model Photo Brief Introduction
1.Computer control, max. Load 300KN
300KN Computer Control 2.Displacement Resolution 0.01mm
Electro-hydraulic Servo UTM-300D
Universal Testing Machine 3.Deformation accuracy: ±0.5%
4.Clamping: Hydraulic Automatic Clamp Fixture
1.Computer control, max. Load 600KN
600KN Computer Control 2.Displacement Resolution 0.01mm
Electro-hydraulic Servo UTM-600D
Universal Testing Machine 3.Deformation accuracy: ±0.5%
4.Clamping: Hydraulic Automatic Clamp Fixture
1.Computer control, max. Load 1000KN
1000KN Computer Control 2.Displacement Resolution 0.01mm
Electro-hydraulic Servo UTM-1000D
Universal Testing Machine 3.Deformation accuracy: ≦±1% (≦±0.5% optional)
4.Clamping: Hydraulic Automatic Clamp Fixture

1.Computer control, max. Load 2000KN

2000KN Computer Control 2.Displacement Resolution 0.01mm
Electro-hydraulic Servo UTM-2000D
Universal Testing Machine 3.Deformation accuracy: ≦±1% (≦±0.5% optional)
4.Clamping: Hydraulic Automatic Clamp Fixture

Impact Testing Machine

Name Model Photo Brief Introduction
1.Impact Energy: 150J, 300J 2.Impact Speed: 5.2 m/s
3.Reading Of Dia: 0-150J (1J/Grid); 0-300J(2J/Grid)
Manual Pendulum Charpy
ITM-50M 4.Angle Accuracy: 0.1°
Impact Tester
5.Standard Specimen Dimension: 10mmx10mmx55mm
(ASTM 12.7mm x6.3mmx55mm optional)

- 23 -
 Name Model Photo Brief Introduction

1.Impact Energy: 25J, 50J 2.Impact Speed: 4.0 m/s

Manual Pendulum Charpy 3.Reading Of Dia: 0-25J; 0-50J 4.Angle Accuracy: 0.1°
ITM-300M
Impact Tester 5.Standard Specimen Dimension: 10mmx10mmx55mm
(ASTM 12.7mm x6.3mmx55mm optional)

1.Impact Energy: 150J, 300J 2.Impact Speed: 5.2 m/s

Dial Display Semi-automatic 3.Raised angle:150º 4.Distance between pendulum
Charpy Pendulum Impact ITM-300B
Testing Machine rotating center and specimen center:750 mm
5.Standard Specimen Dimension: 10mmx10mmx55mm

1. Max. Impact Energy: 300 J, 150 J

Computer Controlled 2. Control Mode: Computer Control Automatic
Semi-automatic Charpy ITM-300S
Impact Testing Machine 3. Min. Reading Values: 1 J
4. Impact Speed: 5.2 m/s

1.Impact Energy: 250J, 500J 2.Impact Speed: 5.4 m/s

Dial Display
Semi-automatic Charpy 3.Raised angle:150º 4.Distance between pendulum
ITM-500B
Pendulum Impact Testing rotating center and specimen center:750 mm
Machine
5.Standard Specimen Dimension: 10mmx10mmx55mm

1.Impact Energy: 250 J, 500 J 2.Impact Speed: 5.4 m/s

Touch screen 3.Control Methods: Single Chip Control
Digital Display Charpy ITM-500T
Impact Testing Machine 4.Minimum Reading Value: 2 J
5.Angle Accuracy: 0.1°

1. Max. Impact Energy: 250 J, 500 J

Computer Controlled 5. Control Mode: Computer Control Automatic
Semi-automatic Charpy ITM-500S
Impact Testing Machine 6. Min. Reading Values: 2 J
Impact Speed: 5.4 m/s

- 24 -
 Inverted Metalurgical Microscope
Name Model Photo Brief Introduction

1.Objective lens: 10X/0.25, 40X/0.65 (plan field,

Inverted Binocular spring), 100X/1.25 (oil, spring)

E-100
Metallurgical Microscope 2.Eyepiece: WF10X/Ø18mm plan eyepiece
(12.5X/Ø15mm)

1.LWD professional plan objective: 5X, 10X, 20X, 50X

Inverted Trinocular 2.Eyepiece: PL10X/18mm plan eyepiece

E-200
Metallurgical Microscope 3.Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

1. Objective: 10X/0.25, 20X/0.40, 40X/0.65, 100X/0.90

(oil) achromatic objective
Inverted Trinocular
E-200A 2. Eyepiece: WF10X/Ø18mm plan eyepiece
Metallurgical Microscope
3. Optional purchase our camera and image analysis
software can do image capture and analysis on PC.
1.Bright Field Objective: 10X/0.25, 20X/0.40, 50X/0.70,
100X/0.85 (dry) 2. Eyepiece: 10X wide field plan

Inverted Trinocular eyepiece and field of view number is Φ22mm,

E-500
Metallurgical Microscope the eyepiece interface is Ф30mm
3.Optional purchase our camera and image analysis
software can do image capture and analysis on PC.
1.Dark & bright field objective:5X/0.12, 10X/0.25,
20X/0.40, 50X/0.70 2.Eyepiece: 10X wide field plan

Inverted Trinocular eyepiece and field of view number is Φ22mm,

E-600
Metallurgical Microscope the eyepiece interface is Ф30mm
3.Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

- 25 -
 Name Model Photo Brief Introduction

1.Objective lens: 5X /0.15, 10X/0.3, 20X/0.45,

Inverted Trinocular 50X/0.55 (Infinity long working distance)

E-800
Metallurgical Microscope 2.Eyepiece: PL10x/22mm (High eye point, super wide
field)

1.Optical system: Infinity chromatic aberration optical

system 2.Objective lens: 5X /0.15, 10X/0.3,
Inverted Trinocular
E-900 20X/0.45, 50X/0.55 (Infinity long working distance)
Metallurgical Microscope
3.Eyepiece: PL10x/22mm (High eye point, super wide
field)

Upright Metalurgical Microscope

Name Model Photo Brief Introduction

1.Eyepiece: 10X/18mm

Upright Trinocular 2.Objective lens: 5X /0.13, 10X/0.25, 50X/0.60

E-200MRT
Metallurgical Microscope 3.Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

1. Eyepiece: WF10X (φ18mm)

2. Objective: 5X/0.12, 10X/0.25, 40X/0.6, 60X/0.75
Upright Trinocular
E-7500 3. Optional purchase our camera and image analysis
Metallurgical Microscope
software can do image capture and analysis on PC.

1.Eyepiece: 10X/22mm
2.Objective lens: 5X /0.12,10X/0.25,40X/0.60,60X/0.70
Upright Trinocular
E-8000 (Infinity long working distance)
Metallurgical Microscope
3.Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

- 26 -
 Name Model Photo Brief Introduction
1. Eyepiece: WF10X(Φ22mm)
2. Objective lens: 5X/0.12, 10X/0.25, 20X/0.60,

Upright Trinocular 40X/0.75 (Infinity long working distance)

E-8500
Metallurgical Microscope 3. Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

1. Eyepiece: WF10X(Φ22mm)
2. Objective lens: 5X/10X/20X/50X (Infinity long
Upright Trinocular
E-4R working distance)
Metallurgical Microscope
3. Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

Includes eight major categories, more than 100

inspection standards (including GB, JB, QC / T, NJ, DL,
Microscope Software MIAS-2018
YB, TB / T, ISO, ASTM, JIS, etc.), more than 600
metallographic image analysis module;

Stereomicroscope
Name Model Photo Brief Introduction

1.Eyepiece: 10X

Upright Portable 2.Objective: 10X, 40X (total magnification 100-400X)

EP-X
Stereomicroscope 3.Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

1. Eyepiece: WF10X/20mm
2. Continuous zoom objective: 0.7X-4.5X
Trinocular continuous zoom
E-Z7 3. Working distance: 100mm
stereo microscope
4. Optional purchase our camera and image analysis
software can do image capture and analysis on PC.

- 27 -
 Camera & Adapter
Name Model Photo Brief Introduction

CCD Camera CCD310 3M Pixel, Suitable for hardness tester / Microscope

CCD Camera CCD510 5M Pixel, Suitable for Microscope

CCD Camera CCD1600 16M Pixel, Suitable for Microscope

CCD Adapter A0.5X 0.5X CCD Adapter

Standard C mount for fix CCD camera on hardness tester or

A32CCD Microscope
C mount adapter Screw diameter 25.4mm
Screw distance: 25.4/32

Both end with screw (suitable for standard 1’’ C mount)

Adapter lens of CCD camera AL-0.5X
0.5X magnification

- 28 -
 Micro Vickers Hardness Block

Hardness Range Size

200-750 HV0.01 25*5mm

200-750 HV0.015 25*5mm

200-750 HV0.02 25*5mm

200-750 HV0.025 25*5mm

200-750 HV0.05 25*5mm

200-750 HV0.1 25*5mm

200-750 HV0.2 25*5mm

200-750 HV0.3 25*5mm

200-750 HV0.5 25*5mm

200-750 HV1 25*5mm

- 29 -
 Macro Vickers Hardness Block

Hardness Range Size

175-750 HV2 Ø60mm

175-750 HV3 Ø60mm

175-750 HV5 Ø60mm

175-750 HV10 Ø60mm

175-750 HV20 Ø60mm

175-750 HV30 Ø60mm

175-750 HV50 Ø60mm

175-750 HV100 Ø60mm

Knoop Hardness Block

Hardness Range Size

200-750 HK0.01 25*5mm

200-750 HK0.02 25*5mm

200-750 HK0.025 25*5mm

200-750 HK0.05 25*5mm

200-750 HK0.1 25*5mm

200-750 HK0.2 25*5mm

200-750 HK0.3 25*5mm

200-750 HK0.5 25*5mm

200-750 HK1 25*5mm

200-750 HK2 25*5mm

- 30 -
 Brinell Hardness Block

Hardness Range Size

180-650 HBW10/3000 Φ90

180-650 HBW10/1500 Φ90

90-450 HBW10/1000 Φ90

90-450 HBW10/500 Φ90

90-125 HBW10/250 Φ60

90-125 HBW10/100 Φ60

180-650 HBW5/750 Φ60

90-450 HBW5/250 Φ60

90-450 HBW5/125 Φ60

90-450 HBW5/62.5 Φ60

50-450 HBW5/25 Φ60

180-650 HWB2.5/187.5 Φ60

90-450 HBW2.5/62.5 Φ60

25-125 HBW2.5/31.25 Φ60

25-35 HBW2.5/15.625 Φ60

75-125 HBW2.5/6.25 Φ60

150-250 HBW1/30 Φ40

25-125 HBW1/10 Φ40

15-70 HBW1/5 Φ40

10-35 HBW1/2.5 Φ40

- 31 -
 Rockwell Hardness Block
Hardness Range Size
20-40 HRA Φ60
45-75 HRA Φ60
80-84 HRA Φ60
20-30 HRC Φ60
35-55 HRC Φ60
60-70 HRC Φ60
20-50 HRB 60x40
60-70 HRB Φ60
88-100 HRB Φ60
40-47 HRD Φ60
55-63 HRD Φ60
70-75 HRD Φ60
58-69 HRE 60x40
70-95 HRE 60x40
95-100 HRE Φ60
107-114 HRE Φ60
60-86 HRF 60x40
86-98 HRF Φ60
105-114 HRF Φ60
1-32 HRG Φ60
57-82 HRG Φ60
80-94 HRG Φ60
80-94 HRH 60x40
96-100 HRH 60x40
40-60 HRK 60x40
60-76 HRK Φ60
91-100 HRK Φ60
110-115 HRL 60x40
110-115 HRM 60x40
110-115 HRR 60x40

- 32 -
 Superficial Rockwell Hardness Block
Hardness Range Size

70-77 HR15N Φ60

78-88 HR15N Φ60
89-91 HR15N Φ60
42-54 HR30N Φ60
55-73 HR30N Φ60
74-80 HR30N Φ60
20-31 HR45N Φ60
32-61 HR45N Φ60
63-70 HR45N Φ60
77-80 HR15T Φ60
80-83 HR15T Φ60
88-93 HR15T Φ60

49-56 HR30T Φ60

57-63 HR30T Φ60
73-82 HR30T Φ60
23-33 HR45T Φ60
34-43 HR45T Φ60
58-72 HR45T Φ60

Webster Hardness Block

Hardness Range Size

10HW 10*100*1.6mm
16HW 10*100*1.6mm

Barcol Hardness Block

Hardness Range Size

36-41 Ba 30*1.6mm
82-84 Ba 30*1.6mm

- 33 -
 Hammer Brinell Hardness Block
Hardness Range Size

177-250 HBW5/750 12*12*150mm

250-650 HBW5/750 12*12*150mm

Portable Brinell Hardness Block

Hardness Range Size

150-6500 HBW10/3000 75*75*20mm

150-650 HBW5/750 75*75*20mm

Shore Hardness Block

Hardness Range Size

30HSD (for metal) 64*16mm

60HSD (for metal) 64*16mm
90HSD (for metal) 64*16mm
Shore A (7 pieces) (for rubber) 50*50*8mm
Shore D (3 pieces) (for rubber) 50*50*8mm
Shore A with certificate (6 pieces) (for rubber) 60*6mm

Leeb Hardness Block

Hardness Range Size

300-400 HLD 89*55mm

490-570 HLD 89*55mm
590-670 HLD 89*55mm
750-830 HLD 89*55mm
840-880 HLD 89*55mm
300-430 HLG 120*70mm
460-540 HLG 120*70mm
550-630 HLG 120*70mm
687-925 HLDL 89*55mm
481-850 HLD+15 89*55mm
525-905 HLC 89*55mm
450-813 HLE 89*55mm
490-830 HLDC 89*55mm

- 34 -
 Hardness Indenter

Type Size

Ø1.588 ball indenter (B, F, G, J scale)

Ø3.175mm ball indenter (E, H, K scale)

Rockwell hardness tester use
Ø12.75mm ball indenter (R scale)

120°Diamond indenter (A,C,D,N scale)

Ø1mm ball indenter

Ø2.5mm ball indenter

Brinell hardness tester use
Ø5mm ball indenter

Ø10mm ball indenter

136°Diamond indenter (Micro Vickers)

Vickers hardness tester use
136°Diamond indenter (Macro Vickers)

Knoop hardness tester use 172°30’& 130°Diamond indenter

Ø1mm

Ø1.588mm

Ø2.5mm
Steel Ball
Ø5mm

Ø10mm

Ø12.75mm

- 35 -
 Parts of Leeb hardness tester
Item Name Type Photo
D / DC
C
D+15
G
DL
DR (5-20mm)
Impact Deveice
SDC (Short type)
400℃

Loading-Unloading one time process

type

D / DC

C
Impact Body
G

DL

3MM (for D;DC;C;DL;D+15)

Ball head
5MM (for G)

Impact device line LHM

Support ring SR (12 pieces)

- 36 -
 Cutting Disc
Name Model Photo Brief Introduction
3. Cutting disc, 10 pieces per box
Precise cutting disc HCD-125 4. Size: Ø125 x 0.5 x 12.7mm
3. Color: red Brown 4. Material: WA resin

1.Cutting disc, 10 pieces per box

Precise cutting disc HCD-152 2.Size: Ø152x 0.6 x 12.7mm
3. Color: red Brown 4. Material: WA resin

1.Cutting disc, 10 pieces per box

Precise cutting disc HCD-200 2.Size: Ø200x 1.0 x 32mm
3. Color: red Brown 4. Material: WA resin

1.Cutting disc, 10 pieces per box

2.Size: Ø230x 1.2 x 32mm
Precise cutting disc HCD-230
3. Color: red Brown 4. Material: WA resin
5. Suitable for high hardness steel (iron base metal HV250-800)
1.Cutting disc, 10 pieces per box
2.Size: Ø250x 1.5 x 32mm / Ø250x 2.0 x 32mm
Precise cutting disc HCD-250
3. Color: red Brown 4. Material: WA resin
5. Suitable for high hardness steel (iron base metal HV250-800)
1.Cutting disc, 10 pieces per box
2.Size: Ø300x 1.5 x 32mm / Ø300x 2.0 x 32mm
Precise cutting disc HCD-300
3. Color: red Brown 4. Material: WA resin
5. Suitable for high hardness steel (iron base metal HV250-800)
1.Cutting disc, 10 pieces per box
2.Size: Ø350x 2.5 x 32mm
Precise cutting disc HCD-350
3. Color: red Brown 4. Material: WA resin
5. Suitable for high hardness steel (iron base metal HV250-800)
1.Cutting disc, 10 pieces per box
2.Size: Ø400x 3.0 x 32mm
Precise cutting disc HCD-400
3. Color: red Brown 4. Material: WA resin
5. Suitable for high hardness steel (iron base metal HV250-800)
1.Cutting disc, 10 pieces per box
2.Size: Ø250x 1.5 x 32mm / Ø250x 2.0 x 32mm
Precise cutting disc LCD-250 3. Color: black 4. Hardness: soft
5. Suitable for iron-based materials, medium hardness steel
(HRC35-50)

- 37 -
 Name Model Photo Brief Introduction
1.Cutting disc, 10 pieces per box
2.Size: Ø300x 1.5 x 32mm / Ø300x 2.0 x 32mm
Precise cutting disc LCD-300 3. Color: black 4. Hardness: soft
5. Suitable for iron-based materials, medium hardness steel
(HRC35-50)
1.Cutting disc, 10 pieces per box
2.Size: Ø350x 2.5 x 32mm
Precise cutting disc LCD-350 3. Color: black 4. Hardness: soft
5. Suitable for iron-based materials, medium hardness steel
(HRC35-50)
1.Cutting disc, 10 pieces per box
2.Size: Ø400x 3.0 x 32mm
Precise cutting disc LCD-400 3. Color: black 4. Hardness: soft
5. Suitable for iron-based materials, medium hardness steel
(HRC35-50)
1.Cutting disc, 10 pieces per box
2.Size: Ø250x 1.5 x 32mm / Ø250x 2.0 x 32mm
Precise cutting disc MCD-250 3. Color: black 4. Suitable for iron-based materials, low
hardness steel, annealed steel and non-ferrous metal materials
(copper, aluminum, etc.)
1.Cutting disc, 10 pieces per box
2.Size: Ø300x 1.5 x 32mm / Ø300x 2.0 x 32mm
Precise cutting disc MCD-300 3. Color: black 4. Suitable for iron-based materials, low
hardness steel, annealed steel and non-ferrous metal materials
(copper, aluminum, etc.)
1.Cutting disc, 10 pieces per box
2.Size: Ø350x 2.5 x 32mm
Precise cutting disc MCD-350 3. Color: black 4. Suitable for iron-based materials, low
hardness steel, annealed steel and non-ferrous metal materials
(copper, aluminum, etc.)
1.Cutting disc, 10 pieces per box
2.Size: Ø350x 2.5 x 32mm
Precise cutting disc MCD-400 3. Color: black 4. Suitable for iron-based materials, low
hardness steel, annealed steel and non-ferrous metal materials
(copper, aluminum, etc.)

1. Size: Ø100x 0.3 x 22/32mm

Diamond cutting disc DCD-100 2. Used for cutting hard metals and hard alloys, non-metallic
minerals, glass, ceramics, brittle, hard brittle materials.

- 38 -
 Name Model Photo Brief Introduction
1. Size: Ø125x 0.38 x 12.7mm
Diamond cutting disc DCD-125
2. Suitable for non-ferrous materials, made in USA

1. Size: Ø152x 0.43 x 12.7mm

2. Suitable for non-ferrous materials, made in USA
Diamond cutting disc DCD-150
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø178x 0.63 x 12.7mm
2. Suitable for non-ferrous materials, made in USA
Diamond cutting disc DCD-175
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø203x 0.80 x 22mm
2. Suitable for non-ferrous materials, made in USA
Diamond cutting disc DCD-200
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø100x 0.3 x 12.7mm
2. Used for cutting hard metals and hard alloys, non-metallic
Diamond cutting disc DCD-100A minerals, glass, ceramics, brittle, hard brittle materials.
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø125x 0.4 x 12.7mm
2. Used for cutting hard metals and hard alloys, non-metallic
Diamond cutting disc DCD-125A minerals, glass, ceramics, brittle, hard brittle materials.
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø150x 0.5 x 12.7mm
2. Used for cutting hard metals and hard alloys, non-metallic
Diamond cutting disc DCD-150A minerals, glass, ceramics, brittle, hard brittle materials.
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø175x 0.7 x 12.7mm
2. Used for cutting hard metals and hard alloys, non-metallic
Diamond cutting disc DCD-175A minerals, glass, ceramics, brittle, hard brittle materials.
3. The dis is made by edge sintering process, with high
precision and long lifespan.
1. Size: Ø200x 0.9 x 22/32mm
2. Used for cutting hard metals and hard alloys, non-metallic
Diamond cutting disc DCD-200A minerals, glass, ceramics, brittle, hard brittle materials.
3. The dis is made by edge sintering process, with high
precision and long lifespan.

1. Work with cutting disc, Prevents sample heating.

Metallographic cutting
MCL 2. Color: Green transparent
cooling lubricant
3. Use: 1: 20 diluted with water

- 39 -
 Mounting Press Powder
Name Model Photo Brief Introduction
1. Used for hot mounting press, 500g/bottle
Mounting press powder HM-B
2. Widely used, black color

1. Used for hot mounting press, 2kg/bottle

Mounting press powder HM-B
2. Widely used, black color

1. Used for hot mounting press, 4kg/bottle

Mounting press powder HM-B
2. Widely used, black color

1. Used for hot mounting press, 18kg/bottle

Mounting press powder HM-B
2. Widely used, black color

1. Used for hot mounting press, 500g/bottle

Mounting press powder HM-R
2. Widely used, red color

1. Used for hot mounting press, 2kg/bottle

Mounting press powder HM-R
2. Widely used, red color

1. Used for hot mounting press, 2kg/bottle

Mounting press powder HM-G
2. Widely used, green color

1. Used for hot mounting press, 500g/bottle

Mounting press powder HME-B 2. Conductive type, black color, suitable for conductive
samples, such as electrolytic polishing
1. Used for hot mounting press, 500g/bottle
2. Protected edge type, black color, very low
Mounting press powder HMS-B shrinkage, tightly combined with sample, high
hardness, good abrasion resistance, suitable for
samples with high edge requirements

1. Used for hot mounting press, 500g/bottle

Mounting press powder HM-T
2. Without color, transparent

1. Used for hot mounting press, 500g/bottle

Mounting press powder HM-W
2. Widely used, white color

1. Used for hot mounting press, 500g/bottle

2. Soluble type, Without color, transparent
Mounting press powder HM-TS
3. Samples can be removed from the mosaic block
without damage

- 40 -
 Name Model Photo Brief Introduction
1. Used for cold mounting press, mini pack size
2. Including 750g powder + 500g liquid + 1 piece of Ø
Mounting press powder CM-AS 30 cold mold + 40 pieces of plastic cup & stir bar + 1
piece of spoon 3. Acrylic, Semi-translucent
4.Curing time: 25℃ 25 minutes
1. Used for cold mounting press, Big pack size
2. Including 1000g powder + 800ml liquid + 1 piece of
Mounting press powder CM-AS Ø 30 cold mold + 40 pieces of plastic cup & stir bar + 1
piece of spoon 3. Acrylic, Semi-translucent
4.Curing time: 25℃ 25 minutes
1. Used for cold mounting press, Big pack size
2. Including 1000g powder + 800ml liquid + 1 piece of
Mounting press powder CM-A Ø 30 cold mold + 40 pieces of plastic cup & stir bar + 1
piece of spoon 3. Acrylic, translucent
4.Curing time: 25℃ 15 minutes
1. Used for cold mounting press, as Crystal clear
2. Including: resin 1000ml liquid + 50ml curing agent +
Mounting press powder CM-R
1 piece of Ø 30 cold mold + 40 pieces of plastic cup &
stir bar 3.Curing time: 25℃ 30 minutes
1. Used for cold mounting press, mini pack size
2. Including: resin 1000ml liquid + 50ml curing agent +
1 piece of Ø 30 cold mold + 40 pieces of plastic cup &
Mounting press powder CM-ER
stir bar 3. Epoxy resin, very low viscosity, good
permeability, completely transparent and odorless
4.Curing time: 25℃ 40 minutes
1. Used for cold mounting press, big pack size
2. Including: resin 4000ml liquid + 2000ml curing agent
+ 1 piece of Ø 30 cold mold + 80 pieces of plastic cup &
Mounting press powder CM-ER
stir bar 3. Epoxy resin, very low viscosity, good
permeability, completely transparent, odorless.
4.Curing time: 25℃ 3-4 hours
1. Used for cold mounting press
2. Including: resin 1000ml liquid + 300ml curing agent
+ 1 piece of Ø 30 cold mold + 80 pieces of plastic cup &
Mounting press powder CM-LER
stir bar 3. Epoxy resin, Small shrinkage, less heat,
completely transparent and odorless.
4.Curing time: 25℃ 20-24 hours

- 41 -
 Mounting Press Mold
Name Model Photo Brief Introduction
1. Used for cold mounting press, 12pcs/box
2. Size: Ø20 x 18mm (Inner height)
Mounting press Mold CMM-20
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 12pcs/box
2. Size: Ø25 x 18mm (Inner height)
Mounting press Mold CMM-25
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 12pcs/box
2. Size: Ø30 x 18mm (Inner height)
Mounting press Mold CMM-30
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 12pcs/box
2. Size: Ø40 x 21mm (Inner height)
Mounting press Mold CMM-40
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 12pcs/box
2. Size: Ø50 x 24mm (Inner height)
Mounting press Mold CMM-50
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 6pcs/box
2. Size: 55(L) x 20(W) x 24mm (Inner height)
Mounting press Mold CMM-55
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 6pcs/box
2. Size: 70(L) x 40(W) x 22mm (Inner height)
Mounting press Mold CMM-70
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 6pcs/box
2. Size: 100(L) x 50(W) x 22mm (Inner height)
Mounting press Mold CMM-100
3. Silicone rubber, work with cold mounting powder,
reusable
1. Used for cold mounting press, 12pcs/box
2. Size: Ø25 x 20mm (Inner height), white color
Mounting press Mold CMM-25P
3. POM material,with bottom lid, work with cold
mounting powder, reusable

- 42 -
 Name Model Photo Brief Introduction
1. Used for cold mounting press, 12pcs/box
2. Size: Ø30 x 25mm (Inner height), white color
Mounting press Mold CMM-30P
3. POM material,with bottom lid, work with cold
mounting powder, reusable
1. Used for cold mounting press, 12pcs/box
2. Size: Ø32 x 27mm (Inner height), blue color
Mounting press Mold CMM-32P
3. POM material,with bottom lid, work with cold
mounting powder, reusable
1. One-time use rectangular crystal mold, 300pcs/bag
2. Size: 24 x 10 x 18mm (L*W*H)
3. Used to carry the slice when the PCB factory
Mounting press Mold CMM-24C
performs the metallographic slice analysis. High
transparency, beautiful and practical, saving cold
mosaic material
1. One-time use rectangular crystal mold, 100pcs/bag
2. Size: OD30mm, height 18mm
3. Used to carry the slice when the PCB factory
Mounting press Mold CMM-24C
performs the metallographic slice analysis. High
transparency, beautiful and practical, saving cold
mosaic material
1. Plastic material, sandwiching thin specimens with
Mosaic sample holder /
CMF-P two closely touching circle shape fixture
Fixture
2. Each box 100pcs

Mosaic sample holder / 1. Plastic material, Ω shape, three rod support

CMF-3
Fixture 2. Each box 100pcs

1. Stainless steel material, sandwiching thin specimens

Mosaic sample holder /
CMF-S with two closely touching circle shape fixture
Fixture
2. Each box 100pcs
1. Spray cans can be evenly sprayed on the mold
Release mounting Mold surface
RMM
reagents 2. Each cans 350ml
3. Suitable for both cold /hot mounting mold release

Release mounting Mold 1. Liquid, 200ml/bottle

RMM
reagents 2. Suitable for both cold /hot mounting mold release

- 43 -
 Abrasive Paper
Name Model Photo Brief Introduction
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
Granular #: P80, P120, P180, P240, P320, P400, P500,
Abrasive paper PGP-230
P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000 3. Size: 230 x 280mm; 50pcs/bag
4.High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Abrasive paper PGP-200 P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø200mm; 100pcs/bag; No glue on back side
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Abrasive paper PGP-230 P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø230mm; 100pcs/bag; No glue on back side
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Abrasive paper PGP-250 P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø250mm; 100pcs/bag; No glue on back side
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Abrasive paper PGP-300 P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø300mm; 100pcs/bag; No glue on back side
5. High water resistance, good quality latex paper

- 44 -
 Name Model Photo Brief Introduction
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Adhesive abrasive paper PGP-200A P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø200mm; 100pcs/bag; back side with adhesive
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Adhesive abrasive paper PGP-230A P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø230mm; 100pcs/bag; back side with adhesive
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Adhesive abrasive paper PGP-250A P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø250mm; 100pcs/bag; back side with adhesive
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation
2. Grinding material: Black silicon carbide (SiC)
3. Granular #: P80, P120, P180, P240, P320, P400,
Adhesive abrasive paper PGP-300A P500, P600, P800, P1000, P1200, P1500, P2000, P2500,
P3000, P4000
4. Size: Ø300mm; 100pcs/bag; back side with adhesive
5. High water resistance, good quality latex paper
1. Used for metallographic sample preparation, dry
grinding. 2. Grinding material: Alumina
Aluminum Abrasive paper
PGP-230DS 3.Granular #:W50(1), W40(0), W28(01), W20(02),
(dry)
W14(03), W10(04), W7(05), W5(06), W3.5(07)
4.Size: 230 x 280mm; 100pcs/bag
1.Used for metallographic sample preparation, dry
grinding. 2. Grinding material: Alumina
Aluminum Abrasive paper
PGP-200D 3.Granular #:W50(1), W40(0), W28(01), W20(02),
(dry)
W14(03), W10(04), W7(05), W5(06), W3.5(07)
4.Size: Ø200mm; 100pcs/bag

- 45 -
 Name Model Photo Brief Introduction
1.Used for metallographic sample preparation, dry
grinding. 2. Grinding material: Alumina
Aluminum Abrasive paper
PGP-230D 3.Granular #:W50(1), W40(0), W28(01), W20(02),
(dry)
W14(03), W10(04), W7(05), W5(06), W3.5(07)
4.Size: Ø230mm; 100pcs/bag
1.Used for metallographic sample preparation, dry
grinding. 2. Grinding material: Alumina
Aluminum Adhesive
PGP-200AD 3.Granular #:W50(1), W40(0), W28(01), W20(02),
Abrasive paper (dry)
W14(03), W10(04), W7(05), W5(06), W3.5(07)
4.Size: Ø200mm; 100pcs/bag, back side with adhesive
1.Used for metallographic sample preparation, dry
grinding. 2. Grinding material: Alumina
Aluminum Adhesive
PGP-230AD 3.Granular #:W50(1), W40(0), W28(01), W20(02),
Abrasive paper (dry)
W14(03), W10(04), W7(05), W5(06), W3.5(07)
4.Size: Ø230mm; 100pcs/bag, back side with adhesive
1.Used for metallographic sample preparation,
waterproof. 2. Grinding material: Alumina
Alumina waterproof
PGP-230WS 3.Granular #:180#, 240#, 320#, 400#, 600#, 800#,
abrasive paper
1000#, 1200#
4.Size: Size: 230 x 280mm; 100pcs/bag
1.Used for metallographic sample preparation,
Alumina waterproof waterproof. 2. Grinding material: Alumina
PGP-200W
abrasive paper 3.Granular #:180#, 240#, 320#, 400#, 600#, 800#,
1000#, 1200# 4.Size: Ø200mm; 100pcs/bag
1.Used for metallographic sample preparation,
Alumina waterproof waterproof. 2. Grinding material: Alumina
PGP-230W
abrasive paper 3.Granular #:180#, 240#, 320#, 400#, 600#, 800#,
1000#, 1200# 4.Size: Ø230mm; 100pcs/bag
1.Used for metallographic sample preparation,
waterproof. 2. Grinding material: Alumina
Alumina waterproof
PGP-200AW 3.Granular #:180#, 240#, 320#, 400#, 600#, 800#,
abrasive paper
1000#, 1200# 4.Size: Ø200mm; 100pcs/bag, back
side with adhesive
1.Used for metallographic sample preparation,
waterproof. 2. Grinding material: Alumina
Alumina waterproof
PGP-230AW 3.Granular #:180#, 240#, 320#, 400#, 600#, 800#,
abrasive paper
1000#, 1200# 4.Size: Ø230mm; 100pcs/bag, back
side with adhesive
- 46 -
 Diamond Spray Polishing Agent
Name Model Photo Brief Introduction
1. Spray cans capacity: 420ml/bottle; N/W: 280g
Diamond spray polishing 2. Granular: 0.25, 0.5, 1, 1.5, 2.5, 3, 3.5, 5, 6, 7, 9, 10,
DSGP-A
agent 14, 15, 20, 28, 40um
3. Suitable for various materials
1. Spray cans capacity: 420ml/bottle; N/W: 280g
Diamond spray polishing
DSGP-B 2. Granular: 0.05um
agent
3. Suitable for various materials
1. Capacity: 500ml/bottle
2. Granular: 0.25, 0.5, 1, 1.5, 2.5, 3, 3.5, 5, 6, 7, 9, 10,
Diamond suspension
DSGP-L 14, 15, 20, 28, 40um
polishing liquid
3. Diamond suspended in liquid and distributed evenly
4. Suitable for various materials
1. Capacity: 200ml/bottle
Diamond suspension 2. Granular: 0.05um
DSGP-L
polishing liquid 3. Diamond suspended in liquid and distributed evenly
4. Suitable for various materials
1. Capacity: 4000ml/bottle
2. Granular: 0.25, 0.5, 1, 1.5, 2.5, 3, 3.5, 5, 6, 7, 9, 10,
Diamond suspension
DSGP-L 14, 15, 20, 28, 40um
polishing liquid
3. Diamond suspended in liquid and distributed evenly
4. Suitable for various materials
1. Weight: 5gm/pc
Diamond Polishing Paste DGPP 2. Granular: 0.5, 1, 1.5, 2.5, 3, 3.5, 5, 6, 7, 9, 10, 14, 15,
20, 28, 40um

Polishing Cloth
Name Model Photo Brief Introduction
1. Size: Ø250mm, Velour (Long fluff) / Imported Velvet
Polishing cloth PC-250 (Medium Short fluff) / Silk Cloth (No Fluff)
2. Normal type, back side no adhesive, 10 pcs/bag.
1. Size: Ø250mm, Cloth (short fluff) / canvas (non-fluff)
Polishing cloth PC-250 / nylon (non-fluff)
2. Normal type, back side no adhesive, 10 pcs/bag.

- 47 -
 Name Model Photo Brief Introduction
1. Size: Ø200mm, Velour (Long fluff) / Imported Velvet
Polishing cloth PC-200A (Medium Short fluff) / Silk Cloth (No Fluff)
2. Normal type, back side with adhesive, 10 pcs/bag.

1. Size: Ø200mm, Velvet (medium and short fluff)

Polishing cloth PC-200A
2. Normal type, back side with adhesive, 10 pcs/bag.

1. Size: Ø230mm, Synthetic polymer material

(non-fluff)
2. Normal type, back side with adhesive, 10 pcs/bag.
3. Used in combination with diamond, alumina, and
Polishing cloth PC-230AS
silica suspensions for final polishing (especially
mechanical/chemical simultaneous polishing) of many
materials (especially very soft materials such as
titanium, copper, silver, etc.)
1. Size: Ø300mm, Velour (Long fluff) / Imported Velvet
Polishing cloth PC-300 (Medium Short fluff) / Silk Cloth (No Fluff)
2. Normal type, back side no adhesive, 10 pcs/bag.
1. Size: Ø300mm, Cloth (short fluff) / canvas (non-fluff)
Polishing cloth PC-300 / nylon (non-fluff)
2. Normal type, back side no adhesive, 10 pcs/bag.
1. Size: Ø250mm, Velvet (Long fluff) / Cloth (Short
fluff) / Silk (No Fluff) / Canvas (No Fluff) / Nylon (No
Polishing cloth PC-250A
Fluff)
2. Normal type, back side with adhesive, 10 pcs/bag.

1.Size: Ø250mm, Imported Velvet (Medium Short fluff)

Polishing cloth PC-250A
2. Normal type, back side with adhesive, 10 pcs/bag.

1. Size: Ø250mm, Synthetic polymer material

(non-fluff)
2. Normal type, back side with adhesive, 10 pcs/bag.
3. Used in combination with diamond, alumina, and
Polishing cloth PC-250AS
silica suspensions for final polishing (especially
mechanical/chemical simultaneous polishing) of many
materials (especially very soft materials such as
titanium, copper, silver, etc.)
1. Size: Ø300mm, Velvet (Long fluff) / Cloth (Short
fluff) / Silk (No Fluff) / Canvas (No Fluff) / Nylon (No
Polishing cloth PC-300A
Fluff)
3. Normal type, back side with adhesive, 10 pcs/bag.

- 48 -
 Name Model Photo Brief Introduction
1.Size: Ø300mm, Imported Velvet (Medium Short fluff)
Polishing cloth PC-300A
2. Normal type, back side with adhesive, 10 pcs/bag.

1.Size: Ø300mm, Synthetic polymer material (non-fluff)

2. Normal type, back side with adhesive, 10 pcs/bag.
3. Used in combination with diamond, alumina, and
Polishing cloth PC-300AS silica suspensions for final polishing (especially
mechanical/chemical simultaneous polishing) of many
materials (especially very soft materials such as
titanium, copper, silver, etc.)

Polishing Lubricating Coolant

Name Model Photo Brief Introduction

1. Blue color, suitable for Grinding and polishing

Polishing lubricating coolant PLC-B processes for all materials
2. Capacity: 1L/bottle

1. Red color, Suitable for polishing process of soft

Polishing lubricating coolant PLC-R materials
2. Capacity: 1L/bottle

Anti-stick Disk
Name Model Photo Brief Introduction
1) Diameter: 203/220/230/250/300mm
Anti-stick disk ASD
2) 5pcs/box

Magnetic Disk
Name Model Photo Brief Introduction
1) Upper surface: with magnetic, work with anti-stick
disks.
Magnetic disk GPMD 2) Bottom surface: adhesive with aluminum plate or
iron plate of grinding or polishing machine
3) Size: Ø203/220/230/250/300mm; 1pc/box

- 49 -
 EBPu Electromechanical Equipment (Zhejiang) Co., Ltd.
Add.: No. 56 Multiple-use Building, Danshan Industrial Zone, Wenling City

Tel: +86-0576-8601 1208 Mobile: +86-13524552810

Sales E-mail:[email protected] / [email protected]

After sales E-mail: [email protected] / [email protected]

Website: www.hiebp.com / www.hardness-testers.com

Post code: 317523

- 50 -