Scribd
Upload
235 views

TDS 8127-Eng PDF

S.S.I Adhesive (STI 8127) is a sodium silicate-based adhesive for bonding calcium silicate and expanded perlite thermal insulation materials to surfaces. It dries to a hard, brittle film and can bond insulation to itself and to nonporous surfaces from 4°C to 700°C. The adhesive is applied by trowel or brush at a coverage of 1.3 to 1.6 l/m2, allowed to tack for 0-5 minutes, then the surfaces are bonded with pressure. It cleans up with water and has a shelf life of 6 months from shipment.

Uploaded by

adammzjin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
235 views

TDS 8127-Eng PDF

S.S.I Adhesive (STI 8127) is a sodium silicate-based adhesive for bonding calcium silicate and expanded perlite thermal insulation materials to surfaces. It dries to a hard, brittle film and can bond insulation to itself and to nonporous surfaces from 4°C to 700°C. The adhesive is applied by trowel or brush at a coverage of 1.3 to 1.6 l/m2, allowed to tack for 0-5 minutes, then the surfaces are bonded with pressure. It cleans up with water and has a shelf life of 6 months from shipment.

Uploaded by

adammzjin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

S.S.

I Adhesive

STI 8127

PHYSICAL PROPERTIES DESCRIPTION

Color : STI 8127 S.S.I Adhesive is a sodium silicate based


Beige incombustible adhesive for bonding calcium silicate
and expanded perlite thermal insulation to it and to
Application : nonporous surfaces. It offers maximum adhesion
Trowel, Brush and optimum working qualities and it forms a hard,
brittle, incombustible film.
Density (ASTM D 1475) :
1.57 ± 0.05 Kg/l STI 8127 S.S.I Adhesive can also be used for
lagging high temperature alkali resistant cloth on
Average Non-volatile (ASTM D 1644) : high temperature insulation.
≥ 55 % by volume (≥ 64 % by weight)
STI 8127 S.S.I Adhesive contains no asbestos,
Coverage (ASTM C 461) : lead, mercury, or mercury compounds.
1.81 l/m2 (2.85 Kg/m2)
Dried film thickness : 1.0 mm LIMITATIONS

Bonding Time (SSTM-02) : Store between 4°C and 38°C. Protect from freezing
0 to 5 min at 23±2°C, RH 50±5 % until dry.

Service Temperature Limits (SSTM-01) : Since the dry adhesive film is soluble in water, it
(Temperature at coated surface) should not be used where moisture will be
4 °C to 700 °C encountered.

Wet Flammability (ASTM D 3278) : Because of its sodium silicate base, this product is
No flash to boiling (About 100 °C) not recommended for use with glass fiber or other
alkali sensitive insulations.

Primed or painted metal surfaces should be tested


for compatibility. If used between impermeable
surfaces, drying time will be extended.

Ver. 1.0
S.S.I Adhesive

STI 8127

APPLICATION GUIDE FOR STI 8127 S.S.I


Adhesive

Material preparation Clean-up


Do not thin. Stir well, but do not use sticks or boards which Clean brushes and equipment with water.
would splinter or otherwise contaminate the product. Apply
only to clean, dry, oil-free surfaces. Keep container closed
when not in use.

Application
Remove any dust from the surfaces to be bonded. To both
surfaces of insulation apply a coat of STI 8127 S.S.I
Adhesive by brush or trowel at coverage of 1.3 to 1.6 l/m2.
Allow an open time of 0 to 5 minutes to develop full tack.
Place the adhered surfaces together, applying pressure to
assure complete and uniform contact.

Brush
Use a clean paintbrush and apply evenly at recommended
coverage. Bond immediately with firm pressure.

Trowel
Use steel trowel. Apply evenly at recommended coverage.
Bond immediately with firm pressure.

IMPORTANT: We make no other warranties and expressly disclaim any


warranties of merchantability or fitness for a particular purpose. If a product
fails to meet this limited warranty, purchaser’s sole and exclusive remedy is
replacement of the product or, at our option, refund of the purchase price.
Our acceptance of any orders for the product is expressly conditional upon
purchaser’s assent to the terms on the applicable invoice.

http://www.stinsulation.com ADEQUATE TESTS: The information contained herein we believe is correct


to the best of our knowledge and tests. The recommendations and
Factory & Office: 164, Soju-dong, Yangsan-si, Gyeongnam, Korea suggestions herein are made without guarantee or representation as to
Tel) 82-55-386-2688 , Fax) 82-55-386-2689. results. We recommend that adequate tests be perform by you to determine
if this product meets all of your requirements. The warranted shelf life of our
E-mail : [email protected] products is six months from date of shipment to the original purchaser.

Ver. 1.0

You might also like