Experiment No. - 1
Experiment No. - 1
– 1
AIM :- INSTALLATION OF VARIOUS OPERATING SYSTEM
i.) INSTALLATION OF WINDOW (7,8,9,10)
ii.) INSTALLATION OF LINUX UBUNTU (18.04)
INTRODUCTION OF OPERATING SYSTEM :-
An Operating System (OS) is system software that manages computer
hardware and software
resources and provides common services for computer programs.
Step 3:- Click the power icon. This is the circle with a line through its top
that’s in the bottom-left corner of the Start windows.
Step 4:- Click Restart. It is in the pop-up menu above the power icon. Doing
so will restart your computer.
With the launch of Windows 10, Microsoft is all set to dominate the personal
computer segment once again. As of this day, Windows 10 has already
achieved more than 14 million installations and is still increasing rapidly. A
majority of these installations were done via the free upgrade system which
Microsoft integrated into windows 7 and 8 PC’s via the windows update. Thanks
to this many genuine windows 7 and windows 8 users were able to upgrade to
windows 10 for free and without any hiccups. At the same time Microsoft was
even kind enough to let some pirates enjoy the same experience for free
However, as usual you can also install Windows 10 via a Bootable Windows 10
USB flash drive. In fact the retail version of windows 10 also comes in a
bootable USB drive. For those who want to perform a clean installation of
Windows 10 on your PC. Here’s how you can create a Bootable Windows 10
USB flash drive and use it to install Windows 10 on your PC.
Step 1:Connect the Bootable USB flash drive with your PC and reboot it.
Step 2:As soon as your PC boots, press the F11 ( this key will differ from one
pc to another ) key to bring up the boot drive selection menu and select the
Bootable Windows 10 USB flash drive. This key will differ from one pc to
another, so do a quick Google search to find out the correct key to bring up the
bios boot menu.
Alternatively, you can also go into the bios of your PC and set the Bootable
Windows 10 USB flash drive with the First boot priority.
Step 3:Press any key when you see the “Press any key to boot from the
USB option”
Step 11: Select the drive where you want to install Windows 10.
Note: Make sure the drive is formatted, if not you can format by selecting the
format option provided.
Step 12: Wait for a some time until Windows is being installed. This may take
from a few minutes to a hour depending on the hardware of your personal
computer. once this process is complete, your PC will restart.
Step 15: Enter a serial key, otherwise click on Do this later to skip this
option.
Step 16: Click on Use express settings to use the recommended settings.
Alternatively you can even click on Customize settings to customize the
settings.