Scribd
Upload
359 views

TL-WN8200ND V2 Qig PDF

Uploaded by

tex hok
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
359 views

TL-WN8200ND V2 Qig PDF

Uploaded by

tex hok
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Quick

Installation Guide
300Mbps High Power Wireless USB Adapter For more information, please visit our website
http://www.tp-link.com
MODEL NO. TL-WN8200ND 7106505994 REV2.0.0

Connect to a Computer
Insert the adapter into a USB port on your computer using the USB cable provided.

Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is
detected. Please click Cancel.

Install Driver and Utility


You can also download the driver and utility at www.tp-link.com

1 Insert the CD and run the Autorun.exe from the pop-up 2 Select TL-WN8200ND and click Install Driver&Utility, then follow the
Autoplay window. InstallShield Wizard to complete the installation.

Setup Wizard

TL-WN7200ND TL-WN8200ND TL-WR841HP


Install Driver&Utility
User Guide

Note: In some operating systems, the CD screen will pop up automatically. Browse CD EXIT
Otherwise, run the CD manually.

Join a Wireless Network


Option 1: Via TP-LINK Utility Option 2: Via Wi-Fi Protected Setup (WPS)
Select your preferred wireless network from the pop-up utility window A: Press the WPS button on your router.
and click Connect. The symbol indicates a successful connection.
B: Within 2 minutes, press and hold the WPS button on the adapter until the
following screen appears.

Configuring the wireless network.


Status WPS Network Profile Advanced
Network Na
Network Name(SSID) Security Channel Signal

TP-LINK_A
B

TP-LINK_A WPA/WPA2-Personal 6 (2.4G)

Connect automatically Connect


Connecting to the network…

34567_TEST WPA/WPA2-Personal 2 (2.4G) 34567_TEST


abcdef_0903 None 9 (2.4G)

AAAAAA None 5 (2.4G) C: When you are prompted “Successfully connected to the network by
WPS!”, click OK.
Option 3: Via Windows Wireless Utility
With the TP-LINK Utility closed, you can use the Windows built-in Wireless Utility to join a wireless network.
Note: For Windows Vista, TP-LINK Utility is not supported, please use the Windows built-in Wireless Utility to join a network.

©2016 TP-LINK

You might also like