Scribd
Upload
89 views

Lesson Plan Thermal

This document outlines the course plan for the subject MME-215: Thermal Engineering taught in the 3rd semester of the Industrial Production branch at the Manipal Institute of Technology. It lists the topics to be covered in each of the 48 lectures, divided into 3 assignments and 3 tests. The course will cover fundamental concepts in thermodynamics, different thermodynamic cycles, compressors, refrigeration, heat transfer, and internal combustion engine performance testing. The document was prepared by Assistant Professor Rohit N Shenoy and approved by the Head of the Mechanical Department.

Uploaded by

rohitnshenoy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
89 views

Lesson Plan Thermal

This document outlines the course plan for the subject MME-215: Thermal Engineering taught in the 3rd semester of the Industrial Production branch at the Manipal Institute of Technology. It lists the topics to be covered in each of the 48 lectures, divided into 3 assignments and 3 tests. The course will cover fundamental concepts in thermodynamics, different thermodynamic cycles, compressors, refrigeration, heat transfer, and internal combustion engine performance testing. The document was prepared by Assistant Professor Rohit N Shenoy and approved by the Head of the Mechanical Department.

Uploaded by

rohitnshenoy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

MANIPAL INSTITUTE OF TECHNOLOGY

(A constituent college of Manipal University, Manipal)


Manipal Karnataka 576 104

DEPARTMENT OF MECHANICAL & MANUFACTURING ENGG.

COURSE PLAN

Department : Mechanical and Manufacturing Engineering


Subject : MME-215: THERMAL ENGINEERING
Semester & branch : 3rd Semester Industrial Production
Name of the faculty : Rohit N Shenoy
NO OF CONTACT HOURS/WEEK : 4

Assignment portion
Assignment no. Topics
1 L1-L19
2 L20-L32
3 L33-L48
Test portion
Test no. Topics
1 L1-L19
2 L20-L32
3 L33-L48

Submitted by:

Rohit N Shenoy
Asst. Professor, ME Dept.

Date:

Approved by:

H.O.D Mechanical

Date:

(Page 1 of 4) MIT/GEN/F-05/R0

MIT/GEN/F-05/R0
Lecture no. Topic to be covered

1 Introduction

2 Basic Definitions

3 Zeroth Law, Heat and Work

4 Heat and Work, Simple Problems

5 Pure Substances

6 Pure Substances

7 First Law of Thermodynamics for a cycle

8 First Law for a process

9 First Law applied to flow process

10 First Law applied to non flow process

11 Steady Flow Energy Equation (S.F.E.E), Applications

12 Second Law of Thermodynamics, Clausius & Kelvin-Planck

13 PMM-2, Clausius Theorem

14 Clausius Inequality

15 Concept of Entropy, T-S Diagram

16 Entropy – Applications

17 Carnot Theorem, Simple problems


Carnot Theorem – Problems, Entropy change in different
18
process
19 Entropy change in diffèrent process
Rankine Cycle
20

MIT/GEN/F-05/R0
(Page 2 of 4)

MIT/GEN/F-05/R0
21 Rankine Cycle, Reheat Cycle

22 Reheat Cycle

23 Thermal Efficiency, Air Standard Efficiency

24 Otto Cycle

25 Diesel Cycle

26 Dual Cycle

27 Reciprocating Compressors, Single and Multi Stage

28 Single and Multi Stage Compressors

29 Minimum Work of Compression

30 Compressors, Effect of Clearance

31 Compressors, Volumetric Efficiency

32 Principle of Refrigeration, Coefficient of Performance

33 Properties of Refrigerants

34 Air Refrigeration

35 Vapour Compression System

36 Vapour Absorption System

37 Vapour Absorption System

38 Conduction in rectangular coordinates

39 Conduction in spherical coordinates

40 Conduction in cylindrical coordinates

41 Composite Wall, Plane Wall

MIT/GEN/F-05/R0
(Page 3 of 4)

MIT/GEN/F-05/R0
42 Convective Heat Transfer

43 Overall Heat Transfer Coefficient

44 Fundamentals of Radiation Heat Transfer

45 Performance Testing of IC Engines, Measurement of BP

46 Measurement of IP and FP

47 Various Efficiencies, Heat Balance Sheet

48 Performance Characteristics

References:

1. P.K.Nag “Engineering Thermodynamics” Tata McGraw Hill New Delhi


2. Cengel “Thermodynamics and Heat Transfer” McGraw Hills New Delhi
3. R.K.Rajput “Engineering Thermodynamics” Laxmi Publications
4. Van Wylen and Sontag R E “Fundamentals of Classic Thermodynamics
John Wiley New York

MIT/GEN/F-05/R0
(Page 4 of 4)

MIT/GEN/F-05/R0

You might also like