Digital Hour Meter & Counter

• Suitable for Hour meter & Counter (Up / Down) application

• Wide Hour meter range from 1 sec to 9999999 hrs
• Wide counter range from 1 to 9999999 counts
• Prescaling facility for Counter
• Alarm facility for both Hour meter & Counter
• Relay & MOSFET Output with Over Load detection
• Retentive & Non-Retentive modes
• 7 Digit LCD with luxurious green backlight
• Compact size
• Suitable for panel mounting

Ordering Information
Cat. No. Description
Z2301N0G1FT00 9-30 V DC (with dual MOSFET output)
Z2221N0G2FT00 85-265 V AC/DC (with Relay output)

91
Digital Hour Meter & Counter

Cat. No. Z2301N0G1FT00 Z2221N0G2FT00

Parameters
Supply Voltage ( ) 9 - 30 VDC 85 - 265 VAC/DC
Power Consumption (W) 2 W max. 2 VA / 1W
Supply Frequency 50 / 60 Hz
I/P Signal Characteristics
Signal Voltage Range 9 - 30 VDC 85 - 265 VAC & 100 - 265 VDC
Signal Isolation 2kV
Output Characteristics
Output type 2 MOSFET: 30 VDC/60 mA (Max.) Relay: 1 C/O, Contact Rating:
Note: Use isolated input supply 5 A(Res.) @ 250 VAC/30 VDC
Contact Material: Ag Alloy
Functional Characteristics
Display 7 digit LCD , 6.5 mm Height, 12 O’ Clock, Transmissive
Number of keys 2 (SET key & RST key)
Reset type Terminal Front Auto Reset
Reset function
Time (min.) 80 ms 3 Sec -
Hour Accuracy ± 2sec per Day
Meter Ranges Hrs : Min : Sec (999:59:59), Hrs : Min (99999:59), Hrs (9999999), Min (9999999), Sec (9999999)
Functions Input Signal For Hour counting detection, Signal has to be present for min. 3msec & signal has to be absent for min 20msec.
Accuracy 100%
Range 1 to 9999999.999
Counter Decimal Point Position(max.) 3
Functions Pre-scaler 4 Digit
Input Switching Freq.(max.) 10 Hz for AC and 40 Hz for DC
Signal Pulse Width min. 50ms ON/50ms OFF for AC, 12.5ms ON/12.5ms OFF for DC
Environmental Characteristics
Operating Temperature -5° C to +55° C
Storage Temperature -10° C to +60° C
Humidity 5 to 95% Rh (Without condensation)
Maximum Operating Altitude 2000 m
Pollution Degree II
Degree of Protection Front side: IP40; Terminals: IP20, Housing : IP30
Enclosure material UL 94 V0 Plastic
Casing color Black
Other Characteristics
Mounting Flush mounting on panel cut-out
Panel Cut-out 22mm X 44.8mm
Weight (Un-packed) 52 gm
Operating position Horizontal
Termination wire Sizes Wire size : 22-14 AWG, 0.3-2.5 mm

EMI / EMC
Harmonic Current Emissions IEC 61000-3-2
Voltage Flicker & Fluctuation IEC 61000-3-3
ESD IEC 61000-4-2
Radiated Susceptibility IEC 61000-4-3
Electrical Fast Transients (Supply) IEC 61000-4-4
Electrical Fast Transients (Signal) IEC 61000-4-4
Surge IEC 61000-4-5
Conducted Susceptibility IEC 61000-4-6
Power Frequency Magnetic Field IEC 61000-4-8
Voltage Dips IEC 61000-4-29
Conducted Emission CISPR 11
Radiated Emission CISPR 11
Safety Compliance:
Test Voltage (All terminal to housing) IEC 60947-5-1
Single fault IEC 61010-1
Leakage Current UL 508
Environmental
Cold Heat IEC 60068-2-1
Dry Heat IEC 60068-2-2
Vibration IEC 60068-2-6
Repetitive Shock IEC 60068-2-27
Non-Repetitive Shock IEC 60068-2-27

92
Digital Hour Meter & Counter

TERMINAL TORQUE & CAPACITY

Torque - 0.40 N.m (3.5 Lb.in)

Terminal screw - M2.5
Ø 3.5 mm
2
Solid Wire - 1 X 0.3...2.5 mm
AWG 22 to 14

MOUNTING DIMENSIONS (mm)

LCD

48

32.23
21.8
60.5

24
2.0
2.4
62 FRONT VIEW
66

GRID RING A B C D E FG
+0.3
22.0

-
RESET
- SET
44.6

I
H
A - Prescaler F - Counter
B - Hour G - Hour Meter
BACK VIEW PANEL CUTOUT C - Minute Symbol
D - Second H - RESET(RST)
E - Alarm I - SET

CONNECTION DIAGRAM

93
Rate Indicator & Totaliser
• Wide input signal sensing range 0.01Hz to 20KHz.
• Wide Totalizer range from 1 to 9999999.
• Wide Rate range from 1 to 999999.
• Prescaling facility for Rate Indicator.
• Alarm facility for both Rate Indicator & Totalizer.
• Password enabled.
• Signal Over-range displayed.

Ordering Information
Cat. No. Description
Z3301N0G2FT00 9 VDC - 30 VDC (with Relay output)

94
Rate Indicator & Totaliser

Cat. No. Z3301N0G2FT00

Parameters
Supply Voltage ( ) 9 VDC to 30 VDC
Max. Power Consumption (W) 0.73 W
Input Signal Range 1 : 0.1 Hz to 40 Hz
Frequency Range Range 2 : 0.1 Hz to 20 KHz
Output Type Relay: 1 C/O, Contact Rating:5 A(Res.) @250 VAC / 30VDC Contact Material: Ag Alloy
Display 7 digit LCD, 6.5mm Height, 12 O’ Clock, Transmissive
Rate Display 6 digit Display
Number of keys 2 (SET & RST)
Reset Reset type Terminal Front Auto Reset
Function Time (min.) 80 ms 3 Sec -
Rate Accuracy ± 0.01%
Totalizer Accuracy 100 %
Decimal Point Position (max.) 4
Pre-scaler 4 digits before decimal point & 3 digits after decimal point.
Operating Temperature - 10° C to +55° C
Storage Temperature - 10° C to +60° C
Humidity 5 to 95% Rh (Without condensation)
Maximum Operating Altitude 2000 m
Pollution Degree II
Degree of Protection Front side : IP40; Terminals: IP20, Housing: IP30
Enclosure material UL 94 V0 Plastic
Casing color Black
Weight (Unpacked) 52g
Operating Position Horizontal
Termination wire Sizes Wire size : 22-14 AWG, 0.3-2.5 mm
Panel Cut-out 22mm X 44.8mm
Mounting Flush / Panel Mounting

Certification RoHS Compliant

EMI / EMC
ESD IEC 61000-4-2
Radiated Susceptibility IEC 61000-4-3
Electrical Fast Transients (Supply) IEC 61000-4-4
Electrical Fast Transients (Signal) IEC 61000-4-4
Surge IEC 61000-4-5
Conducted Susceptibility IEC 61000-4-6
Power Frequency Magnetic Field IEC 61000-4-8
Voltage Dips IEC 61000-4-29
Conducted Emission CISPR 11
Radiated Emission CISPR 11

Safety Compliance:
Test Voltage (All Terminal & Housing) IEC 60947-5-1
Signal Fault IEC 61010-1
Leakage Current UL 508

Environmental
Cold Heat IEC 60068-2-1
Dry Heat IEC 60068-2-2
Vibration IEC 60068-2-6
Repetitive Shock IEC 60068-2-27
Non-Repetitive Shock IEC 60068-2-27

95
Rate Indicator & Totaliser

TERMINAL TORQUE & CAPACITY

Torque - 0.40 N.m (3.5 Lb.in)
Terminal screw - M2.5
Ø 3.5 mm
2
Solid Wire - 1 X 0.3...2.5 mm
AWG 22 to 14

MOUNTING DIMENSIONS (mm)

LCD

48

32.23

24
21.8
60.5

2.0
2.4 FRONT VIEW
62
66 A B C D E

GRID RING
+0.3

- -
22.0

RESET SET

I
44.6

H A - Prescaler
B - Hour
C - Minute
D - Second
BACK VIEW PANEL CUTOUT E - Alarm
H - RESET(RST)
I - SET

CONNECTION DIAGRAM

Z3301N0G2FT00 Magnetic pickup:

Proximity Switch Connection Diagram:

96