Scribd
Upload
38 views

Main Wing Design Details: Specification

This document provides design specifications for the wings, horizontal and vertical stabilizers of a model aircraft. It lists wingspan, fuselage length, wing area, chord dimensions, distances between components, surface areas of ailerons, elevators, rudders, as well as recommended all-up weight, wing loading, power output, and center of gravity range.

Uploaded by

Sumon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
38 views

Main Wing Design Details: Specification

This document provides design specifications for the wings, horizontal and vertical stabilizers of a model aircraft. It lists wingspan, fuselage length, wing area, chord dimensions, distances between components, surface areas of ailerons, elevators, rudders, as well as recommended all-up weight, wing loading, power output, and center of gravity range.

Uploaded by

Sumon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Main Wing Design Details: Specification

Wingspan (A) 30 inches


Fuselage Length (B) 15 inches
Wing Area (D) 69 square inches
Wingcord (C) 2.31 inches
Wing Thickness (E) 0.49 inches
Aileron Total Surface Area (F) Value is for Left and RIght Aileron is 7.6 square inches
Aileron Length X Width (As a starting point) is 6.13 inches X 0.62 inches
Prop / Nose to the leading edge of the main wing Distance (G) 4.8 inches

Horizontal Stabilizer Design Details: Specification


Horizontal Stabilizer Surface Area (H) 5.9 square inches
Horizontal Stabilizer Wing Span (Starting Point) 5.45 inches
Horizontal Stabilizer Average Chord (Starting Point) 1.09 inches
Horizontal Stabilizer Inner Chord (Starting Point) 1.45 inches
Horizontal Stabilizer Outer Chord (Starting Point) 0.73 inches
Elevator Surface Area (I) 1.5 square inches.
Main wing leading edge to horizontal stabilizer leading edge (J) 9.2 inches

Vertical Stabilizer Design Details: Specification


Vertical Stabilizer Surface Area (K) 5.2 aquare inches.
Vertical Stabilizer Height above Fuselage (Starting Point) 2.42 inches
Vertical Stabilizer Lower Chord at Fuselage (Starting Point) 2.07 inches
Vertical Stabilizer Upper Chord at tip (Starting Point) 1.42 inches
Rudder Surface Area (L) 1.6 aquare inches.

Performance Design Specs - CofG, Weight,


Specification
Recommended Power:
Recommended All Up Weight as a Glider (AUW) 7 ounces
Recommended All Up Weight as a Powered Glider (AUW) 8.7 ounces
Maximum Wing Loading (Glider) 14.6 oz / square feet
Maximum Wing Loading (Powered Glider) 18.2 oz / square feet
Recommended Power Output at 8.7 ounces in weight 38 watts
Center of Gravity (M) 0.51 inches to 0.69 inches

You might also like