Class A AIS Transceiver

Voyager X3
Automatic Identification System

See and be Seen • Single integrated design

• NMEA 2000 standard for marine networking (available via software update
in late 2010)
Enhanced Security at Sea • Advanced technological design for enhanced performance & reliability
• Display graphically AIS data target overlay on standard radars and
multifunction chart displays
• Wireless exchange — Navigation status between vessels and shore traffic
monitoring centers
• Monitor vessels of Class A and Class B over standard VHF data transmissions
• Port traffic management — using Class A and Class B data to identify and
control vessel movements
• Automatically transmit safety related messages reducing search and
rescue times
• Rotary encoder for quick selection and data entry using two soft keys
• Easily upgradeable through PC software via RS232 — 9 way D type connector
• Built in 16 Channel GPS receiver with antenna
• High contrast mono-chrome LCD for clear presentation of data
• Audio Alarm buzzer for safety alerts
• Approval pending: FCC and USCG standard in USA, Wheel Mark/MED,
IEC certified in Canada
• International certification to IEC61993-2 and inland waterways standards
For U.S. Sales: This device has not been authorized as required by the rules of
the Federal Communications Commission. This device is not, and may not be, • 1 Year warranty
offered for sale or lease, or sold or leased, until authorization is obtained. • Worldwide service
VOYAGER X3 SYSTEM CONFIGURATION & OPTIONS

Safety Security Vessel Monitoring Port Vessel Traffic Management

AIS improves safety on water AIS helps to identify and track AIS enables automatic control AIS enables port traffic management
through enhanced navigation vessels and improve border and intruder or vessel movement by using precise tracking and
awareness and reduces search security. Improve coast guard alerts within designated areas. identification data.
and rescue times. response time by transmitting
precise navigation data.
SPECIFICATIONS:
Operating Voltage: 12 to 24 VDC
Power Consumption: 10 watts average, 4.75A peak at 12VDC
NMEA0183 Interface: 38.4k baud bi-directional
RS232 Interface: 38.4k baud bi-directional
Operating Temperature: -15ºC to +55ºC
CONNECTIONS
VHF Antenna connector: SO-239 (UHF)
GPS Antenna connector: TNC
RS232 Data connector: 9 way D type
DIMENSIONS: 210mm x 105mm x 138mm / 8.3” x 4.2” x 5.4” W x H x D
IEC61162 interfaces & alarm relay:
Via 50 way D-type junction box. WEIGHT: 1.6kg
Power connector: LTWBB-04PMMS-LC7001
NMEA 2000 connector: LTWBD-05PMMs-LC7001
VHF TRANSCEIVER
Transmitter: Single
Receivers: Three (two AIS and one DSC channel 70)
Frequency Range: 156.025MHz – 162.025MHz
Channel Bandwidth: 25KHz
Power Output: 41dBm +/- 1.5dB
Modulation: 25KHz GMSK / 25KHz AFSK
Data Rate: 9600 bps GMSK & 1200 bps FSK ADDITIONAL FEATURES:
RX Sensitivity: <-107dBm @ 20% PER • Auto configuration and set up software
Compliance Pending: FCC, USCG, Type EU, IEC, CE, RoHs • Data display for MMSI, vessel name, call sign, vessel type, etc.
• Auto configuration for safety related message
Standards and Approvals:
• GPS display of position, COG and SOG
IEC60945 Edn. 4.0 Environmental requirements
• GPS diagnostics and satellite signal bar chart
IEC61993-2 Class A Shipborne equipment
• Key status indicators
IECIEC61162-1/2 Edn.2.0 Digital interfaces
• Shows Transponder software and firmware version
EC61108-1 GPS Receiver equipment
• Displays receiver and transmitter statistics
ITU-RM.1371-3 Universal AIS Technical Characteristics
• Displays Class A, Class B, base station and A to N target data
NMEA2000 Standard for marine networking
• Real time display for serial data output
• Ability to log data to file

Represented by:
ComNav Marine Ltd.
#15-13511 Crestwood Place,
Richmond, British Columbia • Canada • V6V 2G1
Phone: 604-207-1600 • Fax: 604-207-8008
E-mail: [email protected]
www.comnav.com
Worldwide Service
Printed in Canada Specifications subject to change without notice