L2

ManSafe for Ladders

Applications:
Fixed Industrial Ladders
Chimneys
Towers
Cranes
Silos
Offshore
 1. Cargo vessel
Latchways Configuration
2. Dock crane

3. Drilling derrick

4. Flare stack
Latchways plc is the world leader in the design and manufacture Latchways ManSafe for ManSafe® for Ladders systems include a choice of components to
of cable based fall arrest systems offering continuous protection Ladders systems offer 5. Telecommunications tower enable installation on a wide variety of applications and on ladders of
to individuals working at height. outstanding fall arrest 6. Guyed tower different sizes and shapes.
protection for individuals 7. Water tower
Rung Mounted Systems
Our ManSafe® products are made using the highest quality
working at height. 8. Chimneys
components and meet or exceed all appropriate international Standard fixing kits are available for installation on round and
The simplicity of design 3 9. Petrochemical plant
standards. They are distributed and installed in many countries 4 u-shaped rungs up to 22mm diameter, and square, triangular
allows systems to be
around the world including the USA, Canada, Australia and 1
10. Silos
or L-shaped rungs. Alternative fixing kits for larger rungs can
installed so that they
throughout Europe. 11. Tower crane be made available.
follow the contours
2
of the structure. Stile/Stringer Mounted Systems
ManSafe for Ladders For use on narrow ladders where a rung mounted system
9
7 would cause a trip hazard. The standard mounting brackets
5
ManSafe for Ladders systems are designed for use with fixed industrial will accommodate stile widths from 40 to 65mm and stile thicknesses
ladders in a wide variety of applications. Key features of the ManSafe of 5 to 12mm.
for Ladders range include: Top and Bottom Anchors
● Suitable for installation in all environments. A choice of top and bottom anchors and alternative methods
11
● Operation is not affected by snow, ice or adverse of terminating and tensioning the cable are available to suit individual
weather conditions. requirements and applications.

● Unobtrusive, lightweight and flexible. 6

8
● Can be retrofitted or included as part of a new
build programme.

● Will support up to four workers on a single line.

Stile/Stringer Rung Mounted
● Unique LadderLatch™ unit can be attached 10 Mounted System System
or detached at any point on the cable.

● The LadderLatch unit passes smoothly over Top anchor Top anchor

intermediate wire guides, offering continuous

hands free protection.
V Xtenda V Xtenda
● System design can accommodate horizontal or
inclined sections if required.

● A variety of fixing methods allows for easy installation.

Components

Wire guide Wire guide

Swivel shackle Top Anchor and V Xtenda Cable
connection to cam Release catch
A range of top anchors ø8mm 1x19 316 grade
are available to suit stainless steel cable is
different installations. recommended for all
vertical applications.
LadderLatch unit LadderLatch unit
Bottom Anchor Bracket Tensioning Device
140mm
Fixes directly onto ladder The cable clamp and
rungs and supports tensioning device
tensioning device. allows simple swage
free installation.

Turnbuckle and Toggle Wire Guide

Cover plate Starwheel
Alternative method of Provides optimum climbing
terminating and tensioning position and support for
120mm 80mm
cable. Can be used at top cable along the length Bottom anchor Bottom anchor
bracket bracket
or bottom of system. of the system.
The LadderLatch unit incorporates the patented Latchways starwheel
design which rotates freely through intermediate wire guides. Cable clamp and Cable clamp and
tensioning device tensioning device
Materials and Testing Specification
During development, all products are subject to a range of tests to Consider the following when specifying a ManSafe for Ladders system:
define their performance characteristics. These tests include static ● Length of the system
strength, corrosion, locking, conditioning and dynamic performance.
System length determines the number of intermediate
System components undergo rigorous quality assurance procedures guides required:
before leaving the factory: For systems up to 55 metres in length, wire guides should be
● All critical cast components are made from 17/4 PH stainless positioned a maximum of 6 metres apart.
steel, carry a unique serial number and are subject to 100% Beyond 55 metres, or in windy or high altitude locations, the
X-ray and dye penetrant crack detection inspections. spacing should be reduced to every 3 metres to dampen the
● A high proportion of system bracketry is made from 316 marine effect of harmonic oscillation.
grade stainless steel and is subject to batch conformance testing. ● Number of users to be on the system simultaneously
All items have 100% visual inspection and carry unique serial or
If there are up to two users, see the table below to determine
batch numbers.
which parts are required.
Latchways plc is a BS EN ISO 9002 certified company. If the system is to support more than two users at any one time,
ManSafe for Ladders systems are CE certified and exceed European please contact Latchways for advice.
Standard EN 353:1, Canadian Standard CSA Z259.2 and relevant ● Width of ladder
Australian and USA OSHA standards.
If the ladder is narrower than 350mm, a stringer/stile mounted
system is recommended to eliminate potential trip hazards.
Installation
● Shape and size of ladder rungs
Your ManSafe for Ladders system may be installed by your own
personnel, or by one of our international network of approved installers. Please see table below for details of fixing kits.

● A V Xtenda must be included in every vertical system to limit the top

anchor load to 6kN should a fall occur.

● The ladder and any other structural anchorages must be capable of

withstanding a 12kN load at the top anchorage point. This gives a
minimum factor of safety of 2.

● Personal Protective Equipment

Full body harnesses which incorporate a front attachment point and
which are certified to the current national standard should be used.

For all other configurations and technical queries, please call

Latchways +44 (0)1380 732700.

Part Number Table

Top Anchor Top Anchor Intermediate Wire Guide Bottom Bottom Cable
Assembly Fixing Kit Wire Guide Fixing Kit Anchor Anchor (ø8mm 1x19
(up to 2 users) Assembly Fixing Kit stainless steel)

Round Rungs 30011-00 30013-00 30034-00 30008-00 30045-00 30006-00 00900-15

Square Rungs 30011-00 30012-00 30034-00 30009-00 30045-00 30007-00 00900-15

Stringer/Stile 32001-00 Included in 32002-00 Included with 32006-00 Included in 00900-15

85530-00 assembly wire guide 35005-00 assembly

ManSafe is a registered trademark of Latchways plc.

LadderLatch is a trademark of Latchways plc.

Latchways plc, Hopton Park, Devizes, Wiltshire, SN10 2JP, England

Tel: +44 (0)1380 732700 Fax: +44 (0)1380 732701 Email: [email protected] Website: www.latchways.com