Scribd
Upload
324 views

Kruss Techdata Dfa100 en PDF

The document provides specifications for the Dynamic Foam Analyzer DFA100 instrument and its modules. It can analyze foamability, foam stability, and liquid content and drainage of foams. The base DFA100 unit measures foam height, liquid height, and other characteristics. The DFA100 FSM module analyzes foam structure, bubble size distribution, and aging. The DFA100 LCM measures liquid content and resistance at different heights. It has a line sensor camera, temperature control, software for analysis, and accessories like glass columns and filter plates.

Uploaded by

Travis H
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
324 views

Kruss Techdata Dfa100 en PDF

The document provides specifications for the Dynamic Foam Analyzer DFA100 instrument and its modules. It can analyze foamability, foam stability, and liquid content and drainage of foams. The base DFA100 unit measures foam height, liquid height, and other characteristics. The DFA100 FSM module analyzes foam structure, bubble size distribution, and aging. The DFA100 LCM measures liquid content and resistance at different heights. It has a line sensor camera, temperature control, software for analysis, and accessories like glass columns and filter plates.

Uploaded by

Travis H
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

DYNAMIC FOAM ANALYZER – DFA100

SPECIFICATIONS
Product group specifications DFA100 DFA100 FSM DFA100 LCM
Line sensor
Sensor resolution 1728 × 1 px - -
Spatial resolution 200 dpi | 0.125 mm - -
Temporal resolution 20 fps - -
Scanning length 216 mm - -
Operating system
Gas flow rate (internal) 0.2 to 1.0 L/min - -
Gas flow rate (external) 0.05 to 1.0 L/min - -
Approved gases air, nitrogen, carbon dioxide - -
Approved pressure 5 ± 0.5 bar - -
Stirring speed up to 8000 rpm - -
Approved temperature 4 to 90 °C - -
Illumination
Type LED LED -
Wave length, dominant 469 nm (IR: 850 nm) 633 nm -
Camera system
Connection USB 3.0
Performance 2 fps at 1280 × 1024 px
Diameter of minimum detectable bubble 50 µm
Mean field of view size position 1: 285 mm2
position 2: 140 mm2
position 3: 85 mm2
Focus manual
Electrodes
Material - - 35 µm copper, finish: chemical gold
Highest sensor position - - 185 mm
Measured entity - - electrical resistance in Ω
Theoretical measurement range - - 10 Ω to 2 MΩ
Software
ADVANCE foam analysis

Measurement specifications DFA100 DFA100 FSM DFA100 LCM


Analyzed foam characteristic foamability and foam stability foam structure: homogeneity, stability liquid content and drainage
and aging
Results foam height  ean bubble area
m liquid content at 7 sensor positions
liquid height b ubble count per mm² resistance at 7 sensor positions
total height s tandard deviation of mean bubble area 2 5%, 50% and 75% liquid content time
foam capacity b ubble size distribution
 aximum foam density
m b ubble count half life
e xpansion rate S auter mean radius
foam half life time initial foam structure
d rainage half life time fi nal foam structure
s ample temperature
General specifications DFA100
Sample dimensions
Minimum required sample volume 50 mL with 40 mm diameter column
20 mL with 20 mm diameter column
Temperature control
Type double-walled glass column
Range 4 to 90 °C 1)
Resolution 0.1 °C
Temperature measurement
Sensor PT100
Range 4 to 90 °C
Resolution 0.1 °C
Precision 0.1 °C
Accuracy 1/3 DIN B (±0.1 °C at 0 °C, ±0.8 °C at 400 °C)
Location inside sample liquid
Environment
Temperature operating: 15 to 30 °C
Humidity without condensation
Instrument dimensions
Footprint 245 mm × 275 mm (W × D)
Height 460 mm
Weight (without accessories) 9 kg
Power
Voltage 100 to 240 VAC
Power consumption maximum 30 W
Frequency 50 to 60 Hz
Interfaces
PC 1× USB 2.0 (+ 1× USB 3.0 for Foam Structure Module – FSM)
Accessories
Glass columns 20 and 40 mm diameter, temperature control option
Filter plates for sparging diameter: 14 and 30 mm
Filter plate porosities G1: nominal maximum pore size: 100 to 160 µm
G2: nominal maximum pore size: 40 to 100 µm
G3: nominal maximum pore size: 16 to 40 µm
G4: nominal maximum pore size: 10 to 16 µm
Material of columns and frits borosilicate glass (norm: ISO 4793)
Material of sealings silicone and FKM

1)
additonal thermostat needed: TB14
kruss-scientific.com

Technical changes are reserved. DFA100-20180511

You might also like