Scribd
Upload
41 views1 page

Gujarat Technological University: Subject Code: 2181919 Date: Subject Name: Robotics Time: Total Marks: 70

This document is an exam for a robotics course consisting of 5 questions covering various topics in robotics. Question 1 covers commercially available robot configurations, tactile sensors and applications of robotics. Question 2 covers PID control systems, roll-pitch-yaw angles, and open loop control systems. Question 3 covers types of motion control systems, machine vision applications, and robot vision systems. Question 4 covers robotic grippers, manipulator Jacobians, robot kinematics, and degrees of freedom. Question 5 covers artificial intelligence in robotics, feedback control loops, robot anatomy, and spherical robot configurations.

Uploaded by

Jag Parvesh Dahiya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views1 page

Gujarat Technological University: Subject Code: 2181919 Date: Subject Name: Robotics Time: Total Marks: 70

This document is an exam for a robotics course consisting of 5 questions covering various topics in robotics. Question 1 covers commercially available robot configurations, tactile sensors and applications of robotics. Question 2 covers PID control systems, roll-pitch-yaw angles, and open loop control systems. Question 3 covers types of motion control systems, machine vision applications, and robot vision systems. Question 4 covers robotic grippers, manipulator Jacobians, robot kinematics, and degrees of freedom. Question 5 covers artificial intelligence in robotics, feedback control loops, robot anatomy, and spherical robot configurations.

Uploaded by

Jag Parvesh Dahiya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Seat No.: ________ Enrolment No.

___________

GUJARAT TECHNOLOGICAL UNIVERSITY


BE - SEMESTER–VIII (NEW) EXAMINATION – WINTER 2018
Subject Code: 2181919 Date: 19/11/2018
Subject Name: Robotics
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.

Q.1 (a) Brief today’s commercially available basic configuration of robot. 03


(b) Explain tactile sensor working with its applications. 04
(c) Discuss in brief applications of robotics. What will be its future applications 07
in the field of Robotics?
Q.2 (a) Brief out PID Control System. 03
(b) Explain with neat sketch Roll-Pitch-Yaw angles in terms of Robotics. 04
(c) Explain Open loop control system. 07
OR
(c) Discuss in detail GANTRY type robots. 07
Q.3 (a) Explain in brief types of motion control systems. 03
(b) What are the applications of machine vision in robotics? 04
(c) Describe principle function of robot vision system. 07
OR
Q.3 (a) What are the main components used in Robots. 03
(b) Describe various terminology of trajectory planning in brief. 04
(c) What are the General consideration in Robot Material Handling? 07
Q.4 (a) Discuss the different types of Robotic gripper 03
(b) Explain Manipulator Jacobian. 04
(c) Write a short note on robot kinematics. 07
OR
Q.4 (a) Briefly discuss ‘Degree of freedom’ with neat sketch. 03
(b) Give comparison of Lagrange – Euler and Newton – Euler formulations. 04
(c) Explain following terms for robotic sensors: 07
(1) Limit switches (2) potentiometers
Q.5 (a) Describe in brief about artificial intelligence in terms of Robotics. 03
(b) Draw and Explain feed forward and feedback control loops 04
(c) Define Robot anatomy. Explain Spherical configuration of robot and its work 07
envelope.
OR
Q.5 (a) Discuss the properties of Robotic sensors. 03
(b) Explain Gripper design consideration in robotics. 04
(c) Using D-H representation derive the matrix for Cylindrical configuration of 07
robot.

You might also like