Scribd
Upload
101 views

AS5100 Part 1: Code of Practice

This document outlines VicRoads' code of practice for bridge design in addition to the requirements in AS5100.1. It states that VicRoads' Bridge Technical Notes are mandatory and must be followed along with relevant specifications. Where the Bridge Technical Notes differ from AS5100.1, the Notes take precedence. The document also requires bridge designs to undergo a Safety in Design assessment according to Victorian occupational health and safety laws.

Uploaded by

Jing Cao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views

AS5100 Part 1: Code of Practice

This document outlines VicRoads' code of practice for bridge design in addition to the requirements in AS5100.1. It states that VicRoads' Bridge Technical Notes are mandatory and must be followed along with relevant specifications. Where the Bridge Technical Notes differ from AS5100.1, the Notes take precedence. The document also requires bridge designs to undergo a Safety in Design assessment according to Victorian occupational health and safety laws.

Uploaded by

Jing Cao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BTN 021

January 2018

Code of Practice
AS5100 Part 1
1. Scope and application
BTN021 AS5100 Part 1 states VicRoads’ general
requirements for the design of bridges in addition to those
stated in AS5100.1.
VicRoads’ requirements for certain aspects of Part 1 are stated
in individual Bridge Technical Notes.
Bridge Technical Notes are a Code of Practice. Compliance
with Bridge Technical Notes is mandatory.

Bridge Technical Note 015 is to be read in conjunction with the


following:

• The Victorian Occupational Health and Safety Act 2004


Other than as stated in this document and relevant VicRoads
standard specifications, the provisions of AS5100:2017 shall
apply. Where this document differs from AS5100:2017, its
requirements override those of AS5100:2017.

2. Additional requirements
2.1. Cl. 9 Safety in design
Designs shall be subject to a Safety in Design assessment in
accordance with s28 of the Victorian Occupational Health and
Safety Act (2004) and the associated Regulations.

Principal Bridge Engineer


VicRoads

For further information please contact:


Principal Bridge Engineer
Level 3, 60 Denmark Street
Kew Victoria 3101
Email: [email protected]
Bridge Technical Notes are subject to periodic review and
may be superseded.

You might also like