Scribd
Upload
301 views2 pages

HSM USB Serial Driver Getting Started Guide PDF

The Honeywell Scanning & Mobility (HSM) USB Serial Driver exposes HSM USB scanners as virtual COM ports. To install the driver, uninstall any previous versions, run the appropriate install batch file for your OS type, and connect a supported device for auto-installation. Uninstallation follows similar steps using uninstall batch files instead. Technical support is available by phone or email in various regions.

Uploaded by

Ls Luis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
301 views2 pages

HSM USB Serial Driver Getting Started Guide PDF

The Honeywell Scanning & Mobility (HSM) USB Serial Driver exposes HSM USB scanners as virtual COM ports. To install the driver, uninstall any previous versions, run the appropriate install batch file for your OS type, and connect a supported device for auto-installation. Uninstallation follows similar steps using uninstall batch files instead. Technical support is available by phone or email in various regions.

Uploaded by

Ls Luis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Honeywell Scanning & Mobility USB Serial Driver

Getting Started

The Honeywell Scanning & Mobility (HSM) USB Serial Driver is a CDC ACM driver that exposes HSM USB scanners
as as a virtual COM port to the operating system and applications.

Installing the HSM USB Serial Driver


1. Uninstall any previous installed Honeywell USB Serial Drivers.
2. Extract the driver files and identify the two different types of installs supported:

 Install_86.bat – For installing on a 32-bit Operating System.

 Install_64.bat – For installing on a 64-bit Operating System.


Note: When installing on Windows Vista or Windows 7 Operating Systems, you must have Administrator privileges or
you will be prompted for an Administrator password.

3. To run the install, either double click on the appropriate Install_xx.bat file or open a Command Prompt:
Start->Programs->Accessories->Command Prompt
4. If installing via the command prompt, change to the location to which you extracted your driver files and run the
batch file appropriate for your Operating System. You will need to type the name of the .bat file to run the install.
Note: To avoid the standard windows warning messages (“Do you want to allow the following programs to make
changes to this computer”) with Windows Vista and Windows 7 Operating Systems, you must install via
running the Command Prompt as an administrator.
Select Start->Programs->Accessories, right click on the Command Prompt option, and select "Run as
administrator." The command prompt window should say "Administrator: Command Prompt" in the title of the
window.

5. Connect one of the supported devices. The driver autoinstalls for the device.

Uninstalling the HSM USB Serial Driver


1. In the folder to which the driver files were extracted, identify the two different types of uninstalls supported:

 Uninstall_86.bat – For uninstalling on a 32-bit Operating System.

 Uninstall_64.bat – For uninstalling on a 64-bit Operating System.


Note: When uninstalling on Windows Vista or Windows 7 Operating Systems, you must have Administrator privileges
or you will be prompted for an Administrator password.

2. To run the uninstall, either double click on the appropriate Uninstall_xx.bat file or open a Command Prompt:
Start->Programs->Accessories->Command Prompt
3. If uninstalling via the command prompt, change to the location to which you extracted your driver files and run the
batch file appropriate for your Operating System. You will need to type the name of the .bat file to run the
uninstall.
Note: To avoid the standard windows warning messages (“Do you want to allow the following programs to make
changes to this computer”) with Windows Vista and Windows 7 Operating Systems, you must uninstall via
running the Command Prompt as an administrator.
Select Start->Programs->Accessories, right click on the Command Prompt option, and select "Run as
administrator." The command prompt window should say "Administrator: Command Prompt" in the title of the
window.

1
Technical Assistance
If you need assistance installing or troubleshooting your device, please call your distributor or the nearest technical support
office:

North America/Canada
Telephone: (800) 782-4263
E-mail: [email protected]
Latin America
Telephone: (803) 835-8000
Telephone: (800) 782-4263
E-mail: [email protected]
Brazil
Telephone: +55 (11) 5185-8222
Fax: +55 (11) 5185-8225
E-mail: [email protected]
Mexico
Telephone: 01-800-HONEYWELL (01-800-466-3993)
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 7999 393
Fax: +31 (0) 40 2425 672
E-mail: [email protected]
Hong Kong
Telephone: +852-29536436
Fax: +851-2511-3557
E-mail: [email protected]
Singapore
Telephone: +65-6842-7155
Fax: +65-6842-7166
E-mail: [email protected]
China
Telephone: +86 800 828 2803
Fax: +86-512-6762-2560
E-mail: [email protected]
Japan
Telephone: +81-3-3839-8511
Fax: +81-3-3839-8519
E-mail: [email protected]

Online Technical Assistance


You can also access technical assistance online at www.honeywellaidc.com.

You might also like