Data sheet

Customer item no.:

Communication dated: Number: ES 5872341
Doc. no.: Item no.: 100
Quantity: 1 Date: 27/04/2018
Page: 1 / 6

ETN 050-032-160 GGSCP1CGD200552B Version no.: 1

Low-pressure centrifugal pump Etanorm

Operating data
Requested flow rate 20.00 m³/h Actual flow rate 20.00 m³/h
Operating data determined for maximum inlet pressure Actual developed head 55.20 m
Requested developed head 55.20 m Efficiency 58.3 %
Pumped medium Water Power absorbed 5.16 kW
Clean water Pump speed of rotation 3490 rpm
Not containing chemical and NPSH required 3.37 m
mechanical substances which Permissible operating 16.00 bar.g
affect the materials pressure
Ambient air temperature 20.0 °C Discharge press. 5.40 bar.g
Fluid temperature 20.0 °C

Fluid density 998 kg/m³ Min. allow. flow for continuous 5.62 m³/h
Fluid viscosity 1.00 mm²/s stable operation
Suction pressure max. 0.00 bar.g Min. allow. mass flow for 1.56 kg/s
Suction pressure min. -0.49 bar.g continuous stable operation
NPSH available 5.00 m Shutoff head 58.13 m
Mass flow rate 5.54 kg/s Max. allow. mass flow 11.57 kg/s
Max. power on curve 7.44 kW Design Single system 1 x 100 %
tolerances to ISO 9906 class
3B

Design
Pump standard EN 733 Sealing plan P3 Gland packing, external
Design Baseplate mounted, long- sealing liquid (Nc)
coupled Barrier liquid: use suitable water
Orientation Horizontal Seal chamber design Standard seal chamber
Suction nominal dia. DN 50 Sealing liquid pressure incl. 1.33 bar.g
Suction nominal pressure PN 16 inlet pressure
Suction position axial Calculated for inlet pressure 0.00 bar.g
Suction flange dimension EN1092-2 Sealing liquid quantity 0.12 m³/h
according to standard Contact guard With
Suction flange drilled EN1092-2 Wear ring Casing wear ring
according to standard Impeller diameter 173.0 mm
Discharge nominal dia. DN 32 Free passage size 5.8 mm
Discharge norminal pressure PN 16 Silicon free pump assembly Yes
Discharge position top (0°/360°) Bearing bracket construction Water standard standard
Discharge flange dimension EN1092-2 Bearing bracket size 25
according to standard. Bearing seal V ring
Discharge flange drilled EN1092-2 Bearing type Anti-friction bearings
according to standard Lubrication type Grease
Shaft seal Gland packing Color Ultramarine blue (RAL 5002)
Manufacturer KSB KSB-blue
Type RT-P
Material code RT/P
Shaft seal code 1C
Data sheet

Customer item no.:

Communication dated: Number: ES 5872341
Doc. no.: Item no.: 100
Quantity: 1 Date: 27/04/2018
Page: 2 / 6

ETN 050-032-160 GGSCP1CGD200552B Version no.: 1

Low-pressure centrifugal pump Etanorm

Driver, accessories
Manufacturer Flender Frequency 60 Hz
Coupling type Eupex N Rated voltage 460 V
Nominal size 80 Rated power P2 5.50 kW
Coupling guard type Lightweight, not treadproof Available reserve 6.65 %
(ZN79) Rated current 10.0 A
Guard size A148 Starting current ratio 9.1
Guard material Galvanised steel ST TZN Insulation class F to IEC 34-1
Motor enclosure IP55
Baseplate type U-beam / folded plate Cos phi at 4/4 load 0.84
Baseplate size 1A Motor efficiency at 4/4 load 89.5 %
Driver type Electric motor Temperature sensor 3 PTC resistors
Drive standard mech. IEC Terminal box position 0°/360° (top)
Drive standard elec. IEC Viewed towards the suction
Model (make) KSB-Motor nozzle
Drive supplied by Standard motor supplied by Motor winding 460 / 795 V
KSB - mounted by KSB Number of poles 2
Motor const. type B3 Connection mode Delta
Motor size 132S Motor cooling method Surface cooling
Efficiency class Efficiency class IE3 acc. to Motor material Aluminium
IEC60034-30-1 Frequency inverter operation FI allowed
Motor speed 3490 rpm allowed
Motor noise pressure level 77 dBa

Materials G
Flat gasket (400) DPAF seal plate asbestos
Notes 1 free
General criteria for a water analysis: pH-value >= 7; chloride Casing wear ring (502.1) Grey cast iron GG/CAST
content (Cl) <=250 mg/kg. Chlorine (Cl2) <=0.6 mg/kg. IRON
Volute casing (102) Grey cast iron EN-GJL- Shaft sleeve (523) Without
250/A48CL35B Shaft protecting sleeve (524) Chrome steel 1.4122+QT750
Casing cover (161) Grey cast iron EN-GJL- Stud (902) Steel 8.8
250/A48CL35B Nut (920.01) 8+A2A/ 8+B633 SC1 TP3
Shaft (210) Tempered steel C45+N Nut (920.95) Steel 8
Impeller (230) Grey cast iron EN-GJL-
250/A48CL35B
Bearing bracket (330) Grey cast iron EN-GJL-
250/A48CL35B
Data sheet

Customer item no.:

Communication dated: Number: ES 5872341
Doc. no.: Item no.: 110
Quantity: 1 Date: 27/04/2018
Page: 3 / 6

PumpMeter Version no.: 1

Intelligent Pressure Transmitter PumpMeter - with on-site display of
operating point
General description: Sensors:

PumpMeter in an intelligent pressure transmitter with on-site Two gauge pressure transmitters, one each factory provided on
display of measurement values and operating data of the both, inlet and discharge side of pump. Connected to display
pump. It comes factory-provided completely assembled and unit via connector.
parameterised for your individual pump, to be connected via
M12 connector and immediately ready to operate. PumpMeter Accuracy of measurement (sum of errors; relating to
records the pumps load profile during operation in order to – if measurement range):
applicable – provide information on the potential for energy
savings or increased availability. ±1% for fluid temperature -10 … 100 °C

On-site display unit: ±2.5% for fluid temperature -30 … -10 °C and 100 … 140 °C

Backlit display unit for on-site display of measurement values Material of measuring cell: stainless steel (no internal gasket)
and operating data of pump with intuitive and internationally
comprehensible icons, rotatable in steps of 90°. Available measurement ranges:

Display values: -1 ...10 bar (gauge pressure)

suction pressure, pressure at inlet of pump in bar, gauge -1 ...16 bar (gauge pressure)
pressure
discharge pressure, pressure at outlet of pump in bar, gauge
pressure Ambient conditions:
differential pressure between in- and outlet of pump in bar
qualitative indication of operating point Type of protection: IP 65

Connection of display unit via connector (M12 x 1, 5-pin for Ambient temperature:
power supply and utilization of communication interface. -30°C … 80°C (during transport, storage)
Making alternatively available: -10°C … 60°C (operation)
measurement value of discharge pressure via analogue signal
4 … 20 mA Fluid temperature: -30°C … 140°C
calculated value of differential pressure via analogue signal 4
… 20 mA Scuff resistance:
all display values via serial interface RS 485 (Modbus RTU). Ultraviolet resistance (outdoor installation)
Service interface RS232 for parameterisation. Resistance to most cleaning agents
Factory provided parameterisation for individual pump. Resistance to oil mist

Silicone free:
No detrimental to paint adhesion

Electric data:

Power supply:
24V DC ± 10%, min. 140 mA
Interfaces, alternatively utilisable:
4 … 20 mA, 3-conductor (discharge pressure or differential
pressure)
RS485, Modbus RTU (Slave)
Service interface: RS232
EMC:
EN 61326 (Immunity: industrial environment, Emissions:
applicable in home and building environment)
Performance curve

Customer item no.:

Communication dated: Number: ES 5872341
Doc. no.: Item no.:100
Quantity: 1 Date: 27/04/2018
Page: 4 / 6

ETN 050-032-160 GGSCP1CGD200552B Version no.: 1

Low-pressure centrifugal pump Etanorm

Qmin
Qmin
60
Total developed head

[m]

ø174.0/A01
ø173.0/A01
40

Qmin

ø132.0/A01

20
0 5 [m³/h] 10 15 20 25 30 35 40 45
14
[m]
10
NPSH req.

2
0 5 [m³/h] 10 15 20 25 30 35 40 45

50
Efficiency

[%]

0
0 5 [m³/h] 10 15 20 25 30 35 40 45
8

[kW]
Power Input

1
0 5 [m³/h] 10 15 20 25 30 35 40 45
Flow

Curve data
Speed of rotation 3490 rpm Requested developed head 55.20 m
Fluid density 998 kg/m³ Efficiency 58.3 %
Viscosity 1.00 mm²/s Power absorbed 5.16 kW
Flow rate 20.00 m³/h NPSH required 3.37 m
Requested flow rate 20.00 m³/h Curve number K1311.462/22
Total developed head 55.20 m Effective impeller diameter 173.0 mm
Installation plan

Customer item no.:

Communication dated: Number: ES 5872341
Doc. no.: Item no.:100
Quantity: 1 Date: 27/04/2018
Page: 5 / 6

ETN 050-032-160 GGSCP1CGD200552B Version no.: 1

Low-pressure centrifugal pump Etanorm

80 360 490

6
DN2
ø 24 ø 38

160

DN1
132
232

100

230

100 80

840 240

900 300

450
1050

Drawing is not to scale Dimensions in mm

Motor Connections
Motor manufacturer KSB-Motor Suction nominal size DN1 DN 50 / EN1092-2
Motor size 132S Discharge nominal size DN2 DN 32 / EN1092-2
Motor power 5.50 kW Nominal pressure suct. PN 16
Number of poles 2 Rated pressure disch. PN 16
Speed of rotation 3490 rpm
Position of terminal box 0°/360° (top)
Viewed towards the Coupling
suction nozzle Coupling manufacturer Flender
Coupling type Eupex N
Baseplate Coupling size 80
Design U-beam / folded plate Spacer 0.0 mm
Size 1A
Material Steel ST Weight net
Leakage drain baseplate Rp1, Without Pump 30 kg
(8B) Baseplate 43 kg
Foundation bolts M16x250 (Not in scope of Coupling 2 kg
supply) Coupling guard 2 kg
Motor 60 kg
Total 137 kg
Connect pipes without stress or strain! For auxiliary connections see
separate drawing.
Connection plan

Customer item no.:

Communication dated: Number: ES 5872341
Doc. no.: Item no.:100
Quantity: 1 Date: 27/04/2018
Page: 6 / 6

ETN 050-032-160 GGSCP1CGD200552B Version no.: 1

Low-pressure centrifugal pump Etanorm

Connections
Pump casing variant XX48
6B Pumped liquid drain G 1/4 Drilled and plugged.
6D Pumped medium - filling / G 1/4 Drilled and plugged.
venting
8B Leakage drain G 1/2 Drilled
1M.1 / 6D Pressure gauge or G 1/4 Pressure sensor for PumpMeter fitted
filling/venting connection
1M.2 Pressure gauge G 1/4 Pressure sensor for PumpMeter fitted
connection
10E Sealing liquid in G 1/4 Extension pipe closed