Scribd
Upload
48 views

Box Culvert 1x1m

The document provides calculations for load distributions on a culvert. It includes dimensions for the culvert and fill materials above it. Loads are then calculated including a uniform live load of 54.4 kN/m^2, edge pressures of 14.8 and 29.5 kN/m^2, and distributed shoulder loads of 18.1 and 16.6 kN/m^2. Internal angles and earth pressure coefficients are also determined. Load distributions are then summarized on a table showing the member, load type, and pressure values.

Uploaded by

rasikamal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Box Culvert 1x1m

The document provides calculations for load distributions on a culvert. It includes dimensions for the culvert and fill materials above it. Loads are then calculated including a uniform live load of 54.4 kN/m^2, edge pressures of 14.8 and 29.5 kN/m^2, and distributed shoulder loads of 18.1 and 16.6 kN/m^2. Internal angles and earth pressure coefficients are also determined. Load distributions are then summarized on a table showing the member, load type, and pressure values.

Uploaded by

rasikamal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Reference Calculation Outputs

3
density- Concrete γconcrete = 25 kN/m
3
density- soil γsoil = 18 kN/m
3
density- Ballast γball = 20 kN/m

box culvert dimensions h = 1m


b = 1m
tt = 460 mm
tb = 460 mm
tw = 400 mm

fill+ballast hf = 1.5 m
Ballast thickness hb = 0.7 m

cl 3.1.2 β = 1.15
2
q1 = 18.10 kN/m
2
q2 = 16.56 kN/m

internal friction angle φ = 35 deg


= 0.61 rad
K0 = 0.43

2
e1 = 14.78 kN/m
2
e2 = 29.52 kN/m
BD3101
cl3.2.7 LL = 1.80 m
Kt = 0.25
tb18 nominal traction force = 150.00 kN
Ft = 37.50 kN
cl 8.2.10 2/3 and sl loads = 22.00 kN
Distributed force per m = 5.61 kN/m

Dynamic factor Ru loading = 2.00


uic776 cl2.4.2.4 culvert top φu = 1.95
cl 5.8.2 culvert bottom φu = 1.76
bs5400-2-2006
loaded length (sleeper size) B = 3.00 m
Qli = 54.40

e3 = 11.26
e4 = 8.10

KA/K0 = 0.635
h 1m
b 1m
hf 1.5 m

z h1 1.46 m
x b1 1.4 m

Distributed Load
member KN KN
ERTK0 6 -29.5 -14.8
LL 7 54.4 54.4 uniform shell pressure
SIDL-S 7 18.1 18.1
SIDL-F 7 16.6 16.6
ERTK0 8 14.8 29.5 surface pressure all
LLSK0A 8 11.3 8.1
track angle 0 0.00 rad
Ft 5.61 KN/m longitudinal distance 1.4000 m
PATTERN 4.00 kN/m2
C D
ERTK0 -10.094 29.5
LLSK0A 2.166 8.1

ksv 15000 kN/m2


ksH 7500 kN/m2

BS=3

You might also like