0% found this document useful (0 votes)
152 views2 pages

S.no Description Data For Approval

The document provides a description and specifications for two caustic soda dosing pumps, models PHL-90B. Key details include: - The pumps will handle 10-12% NaOCl solution at 2000 LPH maximum capacity and will operate continuously at 6 kg/cm2 discharge pressure. - Construction materials include polypropylene for the liquid end, PTFE faced nitrile for the diaphragm, cast iron for the plunger, and PVC for valves and flanges. - Each pump requires a 2.2 kW motor operating at 960 RPM to power a single stage with 50mm stroke length. - Scope of supply includes the motor, base frame,

Uploaded by

Venkat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
152 views2 pages

S.no Description Data For Approval

The document provides a description and specifications for two caustic soda dosing pumps, models PHL-90B. Key details include: - The pumps will handle 10-12% NaOCl solution at 2000 LPH maximum capacity and will operate continuously at 6 kg/cm2 discharge pressure. - Construction materials include polypropylene for the liquid end, PTFE faced nitrile for the diaphragm, cast iron for the plunger, and PVC for valves and flanges. - Each pump requires a 2.2 kW motor operating at 960 RPM to power a single stage with 50mm stroke length. - Scope of supply includes the motor, base frame,

Uploaded by

Venkat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

S.

no DESCRIPTION Data For Approval


I Process Description
1 Item Description Caustic soda dosing pump
2 Tag No: P-713A/B
3 Model No PHL-90B
4 Type Hydraulic Diaphragm
5 Design code API 675
6 Location of installation Indoor
7 Humidity % Min. 50%, Max. 100%
8 Numbers Required 2(1W + 1S)
9 No of stages Single stage
10 Duty Continuous
II Operating Data
1 Fluid handled 10 - 12% NaOCL Solution
2 Type of fluid corrosive/ non corrosive etc Corrosive
3 Specific gravity of fluid 1.48 1
4 Rated Capacity LPH 2000
Max capacity upto which pump can be operated satisfactorily
5 2100
(LPH)
Min, capacity upto which pump can be operated satisfactorily
6 200
(LPH)
7 Discharge pressure Bar 6 Kg/sq.cm
8 Suction Flooded.
9 NPSH A Ample
10 Volumetric efficiency >85%
11 Mechanical efficiency >65%
12 BkW at Duty point 0.68
13 Motor Rating( at 50 Deg C) in KW 2.2KW (3HP)
13A Motor RPM 960 1
14 Plunger/Diaphragm speed (stoke/min) 120
15 Stroke Length 50MM
16 Operating temp. 22 - 35 °C
17 Specific gravity 1.48 At flow temp
18 Viscosity at operating temp. 1.30 Cp 1
19 pH 10.5 - 13.7
20 Starter type DOL
21 Maximum allowable particle size NA
22 Stoke Adjustment Manual & auto(0-100%)
Manual & auto(0-100%) by stroke adjustment (4-
23 Capacity control
20 ma signal from DCS)
24 Guaranteed Noise level(dba) db <85 from one meter distance
25 Set Pressure of Relief Valve 6.5kg/cm2
26 Gear Box Ratio 8:01
27 Coupling Lov Joy Coupling
28 Type of Bearing Tapper Roller & Ball Bearing
29 Design life of Bearing 15000 Hours Approx
30 Minimum differential pressure required (Bar) 1 Bar
31 Type of Lubrication Hydrol 150
Design life of Pump shall be Minimum service life 20 years &
32 Confirmed
3years for uninterupted operation of pump
III Flange
1 Suction end Location Bottom
2 Discharge end location Top
3 a.) Suction 1 1/2'' ANSI B16.5, #150, FF
4 b.) Discharge 1 1/2'' ANSI B16.5, #150, FF
IV Material of construction
1 Liquid end PP
2 Hydraulic Diaphragm PTFE Faced nitrile
3 Plunger CI IS 210 FG 220 -Rev-A 1
Doc. No. P135-D0003-072_R0
1 of 2
1
4 Diameter of plunger(mm) NA
5 Valve PVC
6 Valve Body PVC
7 Valve seat PVC
8 Flange PVC
9 Base Plate MS as Per IS 2062, Gr.A (Epoxy coated)
V Scope of supply of accessories
Motor as per electrical specification,enclosed in chapter 4 of
1 yes (Supplied by VA Tech - IDE)
volume II B. 1
2 Base frame yes
3 Coupling yes
4 Speed reducer yes
5 Gear box yes
5 Foundation bolt yes
6 Internal relief valve( Inbuilt) yes
7 Coupling Guard yes
8 Suction filter( Y Strainer) yes
VI Note:
1 Confirmed
Painting wherever applicable shall be done as'per the
enclosed painting specification, chapter 7 of the volume II A
2 Respective Motor data sheet / documents number P135-E0003-
3 The companion flanges, gaskets, fasteners, expanders/ Confirmed
reducers, to match the pipe size shall be supplied by
VATECH. MOC shall be as per contract specification
4 Motor shall be supplied by VA TECH paralley while supplying Confirmed
the pump
5 Commissioning spares shall be supplied with pumps Confirmed
VII Documents Enclosed
1 Equipment GA drawing 2025SP-GA-PHL-90PP-ECC-001_Rev.B
2 Cross sectional drawing 2025SP-CS-PHL-90-PP-ECC-001_Rev.B
3 Pulsation Dampener Drawing PDA-10LT-PVC-001_Rev.B
4 ECC - Drive assembly CS-PHL-ECC-001_Rev.A
5 Performance curve Annexure - A

Doc. No. P135-D0003-072_R0


2 of 2

You might also like