Drill Pipe

NKKTubes, a Tenaris company in which JFE Engineering Corp.

has a 49% shareholding, has manufacturing facilities located in
Kawasaki city, Japan, specialized in the production of high quality
seamless tubes for oil and gas and industrial applications with an
annual production capacity of 260,000 tons.

Tenaris (TS: NYSE, Buenos Aires, Mexico and TEN: MTA Italy) is a
leading global manufacturer and supplier of seamless steel pipe
products and provider of pipe handling, stocking and distribution
services to the oil and gas, energy and mechanical industries. It is
also a leading regional supplier of welded steel pipes for gas
pipelines in South America.

TenarisNKKTubes has inherited the technology, know how and

specialist expertise associated with the production, manufacture
and development of drill pipe from NKK Corporation, which
has produced high performance drill pipe and tool joints to
outstanding quality standards since 1954.
 ▲ Upsetting of drill pipe ▲ Magnetic particle inspection ▲ Heat treatment for the weld
(MPI) zone

Quality and Manufacturing

Drill pipes are manufactured Investment in quality and
as part of an integrated technology is a permanent
process accomplished in fully commitment at
equipped state-of-the-art TenarisNKKTubes,
facilities at TenarisNKKTubes. which holds ISO 9001, ISO
14001, API Spec. 7 and API
Drill pipes and tool joints 5D certifications.
are assembled by friction
welding. After removal of All employees are fully
weld bead, each heat affected instructed in the importance
zone is quench and tempered of quality and rigorous
in a unique system to recover quality management systems
mechanical properties. are applied in our operations.
Welded areas are inspected by
UT and MPI. All products are manufactured
in accordance with customer’s
specifications and the most
demanding international
standards.

▲ Friction weld (Break-type)

▲ Long and smooth taper of

internal upset

Drill Pipe 3
 Grades, specifications and availability

DRILL PIPE MECHANICAL PROPERTIES

YIELD STRENGTH TENSILE STRENGTH ELONGATION HARDNESS IMPACT
SPEC. GRADE MIN MAX VALUE*
MIN MAX MIN MAX

ksi (N/mm2) ksi (N/mm2) ksi (N/mm2) ksi (N/mm2) % HRC ft-lbs (Joule)

API 5D Group 1 E-75 75 (517) 105 (724) 100 (689) – API formula – 40 (54)
X-95 95 (655) 125 (862) 105 (724) – API formula – 40 (54)
Group 3 G-105 105 (724) 135 (931) 115 (793) – API formula – 40 (54)
S-135 135 (931) 165 (1138) 145 (1000) – API formula – 40 (54)
NK High S140 140 (965) 165 (1138) 150 (1034) – API formula 39 80 (108)
series Strength V150 150 (1034) 165 (1138) 160 (1102) 178 (1226) API formula 40 80 (108)
Sour C95S 95 (655) 110 (758) 105 (724) – API formula 26 80 (108)
Services C105S 105 (724) 120 (827) 115 (793) – API formula 29 80 (108)
* Full size at room temperature

TOOL JOINT MECHANICAL PROPERTIES

YIELD STRENGTH TENSILE STRENGTH ELONGATION HARDNESS IMPACT
SPEC. GRADE MIN VALUE*
MIN MAX MIN

ksi (N/mm2) ksi (N/mm2) ksi (N/mm2) % HB (HRC) ft-lbs (Joule)

API Spec. 7 120 (827) – 140 (965) 13 Min 285 –

NK High
series Strength TJ130 130 (896) 150 (1034) 150 (1034) 13 Min 301 40 (54)
Sour TJ95 95 (655) 110 (758) 105 (724) 13 (Max 26) 80 (108)
Services TJ110 110 (758) 125 (862) 125 (862) 13 (Max 30) 80 (108)
* Full size at room temperature

DRILL PIPE AND TOOL JOINT CHEMICAL COMPOSITIONS

SPEC. GRADE C Si (Max) Mn P (Max) S (Max) Cr Mo
API 5D
(Pipe body) E, X, G, S – – – 0.030 0.030 – –
S140 Max. Max. Max.
V150 0.30 0.35 1.00 0.020 0.005 1.20 0.40~0.80
NK series
(Pipe body) C95S 0.25~0.30 0.35 0.40~1.00 0.020 0.005 0.80~1.20 0.20~0.80

C105S 0.25~0.30 0.35 0.40~1.00 0.020 0.005 0.80~1.20 0.40~0.80

NK series TJ95 Max.
(Tool joint) TJ110 0.25~0.40 0.35 1.20 0.020 0.010 0.80~1.20 0.25~0.80

DRILL PIPE SSCC RESISTANCE

GRADE CRITERIA *
% of SMYS
C95S Pipe body 80
C105S Pipe body 80
* Method: NACE TM-01-77 Method A.
Higher % SMYS can be supplied upon request.

4 TenarisNKKTubes
 AVAILABLE SIZES AND GRADES
SIZE NOMINAL WALL DRILL PIPE TOOL JOINT
WEIGHT THICKNESS
UPSET API 5D NK SERIES * API NK DSTJTM
Group 1 Group 3 C95S
E X C105S
G S140
S V150
in lbs/ft in

2 3/8 6.65 0.280 EU • • • NC26

2 7/8 10.40 0.362 IU ** • • •
EU • • • NC31
3 1/2 9.50 0.254 IU ** •
EU • NC38 NK DSTJTM NC38
13.30 0.368 IU ** • • •
EU • • • NC38 NK DSTJTM NC38
15.50 0.449 IU ** •
EU • • • NC38 NK DSTJTM NC38
NC40 NK DSTJTM NC40
IEU** • •
4*** 14.00 0.330 IU • • • NC40 NK DSTJTM NC40
EU • • • NC46 NK DSTJTM NC46
4 1/2 13.75 0.271 IU • NC46 NK DSTJTM NC46
EU • NC50 NK DSTJTM NC50
16.60 0.337 EU • • • NC50 NK DSTJTM NC50
IEU • • • NC46 NK DSTJTM NC46
4 1/2 FH
20.00 0.430 EU • • • NC50 NK DSTJTM NC50
IEU • • • NC46 NK DSTJTM NC46
4 1/2 FH
5 16.25 0.296 IU ** • •
19.50 0.362 EU ** • •
IEU • • • NC50 NK DSTJTM NC50
5 1/2 FH NK DSTJTM 5 1/2 FH
25.60 0.500 EU ** • •
IEU • • • NC50 NK DSTJTM NC50
5 1/2 FH NK DSTJTM 5 1/2 FH
5 1/2 21.90 0.361 IEU • • • 5 1/2 FH NK DSTJTM 5 1/2 FH
24.70 0.415 IEU • • • 5 1/2 FH NK DSTJTM 5 1/2 FH

* Proprietary Drill Pipe of TenarisNKKTubes.

** Available for tool joint specified by customer.
*** 11.85 lbs/ft & 15.70 lbs/ft are available upon request.

Drill Pipe 5
NK DSTJTM
(DOUBLE SHOULDER TOOL JOINT)

DESIGN FEATURES
• Double shoulder • Interchangeability with API
connection (External tool joint.
& Internal).
• High torque resistance.
• API Spec. 7 thread.
• Same running speed as
• Smooth bore. NK DSTJTM tool API tool joint.
joint pin ID is equal to the
box ID. • Longer durability & lower
repair ratio than API tool
joint.

• Bigger ID and/or smaller OD

which translates into
Internal
improved hydraulics and/or Shoulder

fish ability.

• Suitable for sour drilling

(due to minimal hoop stress
in box and lower tensile
stress in pin).

INTERCHANGEABILITY NK DSTJTM is interchangeable

WITH API TOOL JOINT with API tool joint. Any kind
of accessories and drill pipe
with API connections can be
made up with NK DSTJTM drill
pipe.
NK DSTJTM BOX API BOX

NK DSTJTM PIN API PIN

NK DSTJTM BOX API BOX

API PIN NK DSTJTM PIN

6 TenarisNKKTubes
 HIGH TORQUE RESISTANCE
NK DSTJTM has excellent TOOL JOINT MAKE-UP TORQUE CURVE
torsional strength
6 5/8 x 2 3/4 (PIN) 6 5/8 x 2 3/4 (PIN)
compared to API tool joint. NK DSTJTM API NC50
NK DSTJTM is suitable for

MAKE-UP TORQUE
deep well drilling, extended

(1000 ft/lbs)
reach well or horizontal
well drilling. Various
applications, smaller OD
100
and larger ID are available.
YIELD POINT
89.1
Make-up Test 80
74.1
Diagram on the right shows the make-up torque curve Pipe Body Torsional Yield*
63.4
torque resistance tests of both tool joints (6 5/8’’ 60 API Tool Joint Torsional Yield*
supporting the performance x 2 3/4’’). Difference, as seen, YIELD POINT
offered by NK DSTJTM tool is remarkable. In the case 52.9

joint. The results reflect a NK DSTJTM NC50 would be 40 38.0

API Tool Joint Recommended Make-up Torque*
higher performance of the attached to API S135 5’’ x
NK DSTJTM NC50 over the 19.5 ft-lbs drill pipe, pipe 20
API NC50. This figure shows body would yield before
the tool joint does.
0
20 40 60 80 100 120 140 160 (DEGREES)
CIRCUMFERENTIAL MAKE-UP

*API RP 7G (16th edition, 1998)

FEM Analysis
In the case of API NC50, NK DSTJTM NC50 clearly
very high VME stress and indicates improved
compression stress are found performance in comparison
near external shoulder area to standard API tool joint.
and it is supposed that
shoulder deformation will
start soon.

STRESS
kg/mm2
• API NC50 100 • NK DSTJTM NC50
90
80
70
VME 60 VME
stress 50 stress
40
30
20
10
Axial 0 Axial
stress -10 stress
-20
-30
-40
-50
Hoop -60 Hoop
stress -70 stress
-80
-90
-100

Pin: 6 5/8" OD x 2 3/4" ID Pin: 6 5/8" OD x 2 3/4" ID

Box: 31/2" ID Box: 2 3/4" ID
Circumferential make-up: 40 Degrees Circumferential make-up: 20 Degrees
31,200 ft-lbs (42,300 N-m) 31,900 ft-lbs (43,300 N-m)

Drill Pipe 7
NK DSTJTM
TORSIONAL STRENGTH, TENSILE STRENGTH AND MAKE-UP TORQUE

NK DSTJTM NC38 NK DSTJTM NC40

ID DATA OD ID DATA OD

5´´ 4 7/8´´ 4 3/4´´ 4 5/8´´ 5 1/2´´ 5 3/8´´ 5 1/4´´ 5 1/8´´

2 1/8’’ Torque (ft-lb) 36,060 31,770 27,320 23,040 2 7/16’’ Torque (ft-lb) 40,500 40,280 39,590 34,500
Tension (lb) 912,600 912,600 912,600 912,600 Tension (lb) 971,900 971,900 971,900 971,900
Make-up (ft-lb) 25,200 22,200 19,100 16,100 Make-up (ft-lb) 28,400 28,200 27,700 24,200
2 5/16’’ Torque (ft-lb) 32,400 31,100 26,650 22,370 2 9/16’’ Torque (ft-lb) 37,530 37,320 37,120 33,930
Tension (lb) 827,700 827,700 827,700 827,700 Tension (lb) 908,100 908,100 908,100 908,100
Make-up (ft-lb) 22,700 21,800 18,700 15,700 Make-up (ft-lb) 26,300 26,100 26,000 23,800
2 7/16’’ Torque (ft-lb) 29,750 29,580 26,130 21,850 2 11/16’’ Torque (ft-lb) 34,370 34,190 34,000 33,290
Tension (lb) 767,100 767,100 767,100 767,100 Tension (lb) 841,100 841,100 841,100 841,100
Make-up (ft-lb) 20,800 20,700 18,300 15,300 Make-up (ft-lb) 24,100 23,900 23,800 23,300
2 9/16’’ Torque (ft-lb) 26,930 26,770 25,560 21,280 2 13/16’’ Torque (ft-lb) 31,040 30,860 30,690 30,520
Tension (lb) 703,300 703,300 703,300 703,300 Tension (lb) 770,900 770,900 770,900 770,900
Make-up (ft-lb) 18,900 18,700 17,900 14,900 Make-up (ft-lb) 21,700 21,600 21,500 21,400

NK DSTJTM NC46 NK DSTJTM NC50

ID DATA OD ID DATA OD

6 1/4´´ 6 1/8´´ 6´´ 5 7/8´´ 6 5/8´´ 6 1/2´´ 6 3/8´´ 6 1/4´´

2 1/4’’ Torque (ft-lb) 74,400 70,530 63,720 57,120 2 3/4’’ Torque (ft-lb) 88,380 80,730 72,990 65,470
Tension (lb) 1,537,800 1,537,800 1,537,800 1,537,800 Tension (lb) 1,681,000 1,681,000 1,681,000 1,681,000
Make-up (ft-lb) 52,100 49,400 44,600 40,000 Make-up (ft-lb) 61,900 56,500 51,100 45,800
2 1/2’’ Torque (ft-lb) 68,310 67,990 62,760 56,160 3’’ Torque (ft-lb) 80,240 79,270 71,520 64,000
Tension (b) 1,416,600 1,416,600 1,416,600 1,416,600 Tension (lb) 1,534,200 1,534,200 1,534,200 1,534,200
Make-up (ft-lb) 47,800 47,600 43,900 39,300 Make-up (ft-lb) 56,200 55,500 50,100 44,800
2 3/4’’ Torque (ft-lb) 61,410 61,120 60,830 54,930 3 1/4’’ Torque (ft-lb) 71,200 70,890 69,750 62,220
Tension (lb) 1,282,600 1,282,600 1,282,600 1,282,600 Tension (lb) 1,374,700 1,374,700 1,374,700 1,374,700
Make-up (ft-lb) 43,000 42,800 42,600 38,500 Make-up (ft-lb) 49,800 49,600 48,800 43,600
3’’ Torque (ft-lb) 53,690 53,440 53,180 52,920 3 1/2’’ Torque (ft-lb) 61,270 61,000 60,720 60,120
Tension (lb) 1,135,800 1,135,800 1,135,800 1,135,800 Tension (ft-lb) 1,202,400 1,202,400 1,202,400 1,202,400
Make-up (ft-lb) 37,600 37,400 37,200 37,000 Make-up (ft-lb) 42,900 42,700 42,500 42,100
3 1/4’’ Torque (ft-lb) 45,130 44,910 44,700 44,480 3 3/4’’ Torque (ft-lb) 50,400 50,180 49,950 49,720
Tension (lb) 976,300 976,300 976,300 976,300 Tension (lb) 1,017,400 1,017,400 1,017,400 1,017,400
Make-up (ft-lb) 31,600 31,400 31,300 31,100 Make-up (ft-lb) 35,300 35,100 35,000 34,800

NK DSTJTM 5 1/2 FH INTERCHANGEABILITY OF CONNECTIONS

ID DATA OD NUMBER EQUIVALENT
CONNECTION CONNECTION
7 1/4´´ 7 1/8´´ 7´´ 6 7/8´´

3’’ Torque (ft-lb) 111,140 101,600 92,310 83,250 NC38 3 1/2 IF

Tension (lb) 2,086,000 2,086,000 2,086,000 2,086,000 NC40 4 FH
Make-up (ft-lb) 77,800 71,100 64,600 58,300 NC46 4 IF
3 1/4’’ Torque (ft-lb) 109,140 99,880 90,580 81,520 NC50 4 1/2 IF
Tension (lb) 1,926,500 1,926,500 1,926,500 1,926,500
Make-up (ft-lb) 76,400 69,900 63,400 57,100
3 1/2’’ Torque (ft-lb) 99,930 97,820 88,520 79,460
Tension (lb) 1,754,200 1,754,200 1,754,200 1,754,200
Make-up (ft-lb) 70,000 68,500 62,000 55,600
3 3/4’’ Torque (ft-lb) 88,290 87,930 86,110 77,050
Tension (lb) 1,569,100 1,569,100 1,569,100 1,569,100
Make-up (ft-lb) 61,800 61,600 60,300 53,900
Note Make-up torque is based on 70% of Torsional Yield Strength.
4’’ Torque (ft-lb) 75,640 75,330 75,020 74,260
TJ130 (SMYS 130ksi) is the standard tool joint for NK DSTJTM
Tension (lb) 1,371,300 1,371,300 1,371,300 1,371,300 (box-weak connections shown in bold type).
Make-up (ft-lb) 52,900 52,700 52,500 52,000
Other tool joint OD & ID combinations available upon request.

8 TenarisNKKTubes
 Additional Processes

Hardfacing

TenarisNKKTubes can supply varieties of hardfacing using

accumulated technology and experience and also provides
commercially available hardfacing such as ARNCO series,
ARMACOR, etc.

Proprietary Hardfacing

SERIES 1000 SERIES 6000 & 8000

Fine particle hardfacing Hardfacing extends 3 3/4"
over the wear area of the
SERIES 3000 tool joint with finger
Coarse particle hardfacing protection on the tapered
with standard density elevator shoulder.
The superior wear resistance
SERIES 4000 and minimal casing wear
Coarse particle hardfacing properties of SERIES 6000
with high density are due to its unique
application method. SERIES
8000´s fine surface can
minimize casing wear.

Tool joint break-in

Upon customer’s request, TenarisNKKTubes will conduct

the break-in of tool joints to eliminate the rig handling time
and ensure that the process is carried out in a controlled
environment.

1 Apply an even coat of 50% 3 After completing the

zinc-base thread compound required make and break
on pin and box. cycles, the tool joints shall
be separated and cleaned
2 After making up hand tight, thoroughly.
the assembled components
will be made up at the 4 Connections shall be visually
specified torque and then inspected for thread
broken out. damages.

If required, TenarisNKKTubes will provide a certificate for

break-in of tool joints.

Accessories

TenarisNKKTubes can supply drill pipe accessories such as

drill collars, heavy weight drill pipes, and others from qualified
sub-suppliers.

Drill Pipe 9
 UPSET DIMENSIONS AND WEIGHTS (GROUP 1)
DESIGNATIONS PIPE BODY CALCULATED WEIGHT UPSET DIMENSIONS (in)
SIZE NOMINAL OD WT ID PLAIN UPSET OD ID LENGTH OF LENGTH OF LENGTH OF LENGTH OF LENGTH
WEIGHT END AT END INTERNAL INTERNAL EXTERNAL EXTERNAL TAPER END OF
OF PIPE UPSET TAPER UPSET PIPE TO
+1/8 +1 1/2 TAPER
-1/32 ±1/16 -1/2 Min Min Min Max FADE OUT
in lb/ft in in in lb/ft lb in in in in in in in in

D t d wpe ew Dou dou Liu miu Leu meu meu Leu+meu

INTERNAL-UPSET
2 7/8 10.40 2.875 0.362 2.151 9.72 3.20 2.875 1 5/16 1 3/4 1 1/2 – – – –
3 1/2 9.50 3.500 0.254 2.992 8.81 4.40 3.500 2 1/4 1 3/4 – – – – –
13.30 3.500 0.368 2.764 12.31 4.40 3.500 1 15/16 1 3/4 1 1/2 – – – –
3 1/2 15.50 3.500 0.449 2.602 14.63 3.40 3.500 1 15/16 1 3/4 1 1/2 – – – –
4 11.85 4.000 0.262 3.476 10.46 4.20 4.000 2 15/16 1 3/4 – – – – –
14.00 4.000 0.330 3.340 12.93 4.60 4.250 2 3/4 1 3/4 2 – – – –
4 1/2 13.75 4.500 0.271 3.958 12.24 5.20 4.750 3 3/8 1 3/4 – – – – –
5 16.25 5.000 0.296 4.408 14.87 6.60 5.000 3 3/4 1 3/4 – – – – –

EXTERNAL-UPSET
2 3/8 6.65 2.375 0.280 1.815 6.26 1.80 2.656 1.815 – – 1 1/2 1 1/2 – 4
2 7/8 10.40 2.875 0.362 2.151 9.72 2.40 3.219 2.151 – – 1 1/2 1 1/2 – 4
3 1/2 9.50 3.500 0.254 2.992 8.81 2.60 3.938 2.992 – – 1 1/2 1 1/2 – 4
13.30 3.500 0.368 2.764 12.31 4.00 3.938 2.602 2 1/4 2 1 1/2 1 1/2 – 4
15.50 3.500 0.449 2.602 14.63 2.80 3.938 2.602 – – 1 1/2 1 1/2 – 4
4 11.85 4.000 0.262 3.476 10.46 5.00 4.500 3.476 – – 1 1/2 1 1/2 – 4
14.00 4.000 0.330 3.340 12.93 5.00 4.563 3.340 – – 1 1/2 1 1/2 – 4
4 1/2 13.75 4.500 0.271 3.958 12.24 5.60 5.063 3.958 – – 1 1/2 1 1/2 – 4
16.60 4.500 0.337 3.826 14.98 5.60 5.063 3.826 – – 1 1/2 1 1/2 – 4
20.00 4.500 0.430 3.640 18.69 5.60 5.063 3.640 – – 1 1/2 1 1/2 – 4

INTERNAL-EXTERNAL UPSET
4 1/2 16.60 4.500 0.337 3.826 14.98 8.10 4.750 3 5/32 2 1/2 2 1 1/2 1 1 1/2 –
20.00 4.500 0.430 3.640 18.69 8.60 4.781 3 2 1/4 2 1 1/2 1 1 1/2 –
5 19.50 5.000 0.362 4.276 17.93 8.60 5.188 3 11/16 2 1/4 2 1 1/2 1 1 1/2 –
25.60 5.000 0.500 4.000 24.03 7.80 5.188 3 7/16 2 1/4 2 1 1/2 1 1 1/2 –
5 1/2 21.90 5.500 0.361 4.778 19.81 10.60 5.750 4 2 1/4 2 1 1/2 1 1 1/2 –
24.70 5.500 0.415 4.670 22.54 9.00 5.750 4 2 1/4 2 1 1/2 1 1 1/2 –
* Note: This data is based on API 5D (5th edition Oct. 2001).

INTERNAL UPSET EXTERNAL UPSET INTERNAL-EXTERNAL UPSET

meu Leu meu Leu

miu Liu Dou Dou Dou

miu Liu
d D dou d D dou d D dou

10 TenarisNKKTubes
 UPSET DIMENSIONS AND WEIGHTS (GROUP 3)
DESIGNATIONS PIPE BODY CALCULATED WEIGHT UPSET DIMENSIONS (in.)
SIZE NOMINAL OD WT ID PLAIN UPSET OD ID LENGTH OF LENGTH OF LENGTH OF LENGTH END
WEIGHT END AT END INTERNAL INTERNAL EXTERNAL OF PIPE TO
OF PIPE UPSET TAPER UPSET TAPER FADE
OUT EXT.
+1/8 +1 1/2 UPSET
-1/32 ±1/16 -1/2 Min Min Max

in lb/ft in in in lb/ft lb in in in in in in

D t d wpe ew Dou dou Liu miu Leu Leu+meu

INTERNAL-UPSET
2 7/8 10.40 2.875 0.362 2.151 9.72 5.40 2.875 1 5/16 3 1/2 – – –
3 1/2 13.30 3.500 0.368 2.764 12.31 7.40 3.500 1 5/16 3 1/2 – – –
4 14.00 4.000 0.330 3.340 12.93 8.80 4.250 2 5/8 3 1/2 – – –
5 16.25 5.000 0.296 4.408 14.87 13.60 5.000 3 9/16 3 1/2 – – –

EXTERNAL-UPSET
2 3/8 6.65 2.375 0.280 1.815 6.26 4.60 2.656 1 9/16 4 1/4 – 3 5 1/2
2 7/8 10.40 2.875 0.362 2.151 9.72 6.20 3.250 1 15/16 4 1/4 – 3 5 1/2
3 1/2 13.30 3.500 0.368 2.764 12.31 10.20 4.000 2 1/2 4 1/4 – 3 5 1/2
15.50 3.500 0.449 2.602 14.63 8.20 4.000 2 1/2 4 1/4 – 3 5 1/2
4 14.00 4.000 0.330 3.340 12.93 14.40 4.625 3 1/16 4 1/4 – 3 5 1/2
4 1/2 16.60 4.500 0.337 3.826 14.98 17.20 5.188 3 9/16 4 1/4 – 3 5 1/2
20.00 4.500 0.430 3.640 18.69 16.00 5.188 3 7/16 4 1/4 – 3 5 1/2
5 19.50 5.000 0.362 4.276 17.93 21.60 5.750 3 15/16 4 1/4 – 3 5 1/2
25.60 5.000 0.500 4.000 24.03 21.20 5.875 3 13/16 4 1/4 – 3 5 1/2

INTERNAL-EXTERNAL UPSET
3 1/2 15.50 3.500 0.449 2.602 14.63 11.00 3.781 1 15/16 4 1/4 – 3 5 1/2
4 1/2 16.60 4.500 0.337 3.826 14.98 8.70 4.750 2 7/8 2 1/4 3 1 1/2 3
20.00 4.500 0.430 3.640 18.69 17.60 4.781 2 13/16 4 13/16 3 3 5 1/2
5 19.50 5.000 0.362 4.276 17.93 16.80 5.188 3 9/16 4 9/16 3 3 5 1/2
25.60 5.000 0.500 4.000 24.03 15.40 5.188 3 5/16 4 5/16 3 3 5 1/2
5 1/2 21.90 5.500 0.361 4.778 19.81 21.00 5.750 3 13/16 4 13/16 3 3 5 1/2
24.70 5.500 0.415 4.670 22.54 18.40 5.750 3 13/16 4 13/16 3 3 5 1/2
* Note: This data is based on API 5D (5th edition Oct. 2001).

INTERNAL UPSET EXTERNAL UPSET INTERNAL-EXTERNAL UPSET

meu Leu meu Leu

Liu
Liu Dou Dou dou
miu Liu
d D dou d D dou d D dou

Drill Pipe 11
TOOL JOINT DIMENSIONS (GROUPS 1 & 3)
TOOL DRILL PIPE TOOL JOINT TORSIONAL
JOINT RATIO, PIN
SIZE AND NOMIMAL GRADE OD ID BEVEL DIA. TOTAL PIN BOX COMBINED DIA. OF DIA. OF
DESIG- TO DRILL
STYLE WEIGHT OF PIN OF PIN OF PIN AND LENGTH TONG TONG LENGTH PIN AT BOX AT
NATIONS PIPE
AND BOX BOX TOOL SPACE SPACE OF PIN ELEVATOR ELEVATOR
SHOULDER JOINT PIN AND BOX UPSET UPSET
+1/64 +1/4
±1/32 -1/32 ±1/64 -3/8 ±1/4 ±1/4 ±1/2 Max Max

in lb/ft in in in in in in in in in
D D d DF LP LPB LB L DPE DTE

NC26 2 3/8 EU 6.65 E75 3 3/8 1 3/4 3 17/64 10 7 8 15 2 9/16 2 9/16 1.10
X95 3 3/8 1 3/4 3 17/64 10 7 8 15 2 9/16 2 9/16 0.87
G105 3 3/8 1 3/4 3 17/64 10 7 8 15 2 9/16 2 9/16 0.79
NC31 2 7/8 EU 10.40 E75 4 1/8 2 1/8 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 1.03
X95 4 1/8 2 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 0.90
G105 4 1/8 2 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 0.82
S135 4 3/8 1 5/8 3 61/64 10 1/2 7 9 16 3 3/16 3 3/16 0.82
NC38 3 1/2 EU 9.50 E75 4 3/4 2 11/16 4 37/64 11 1/2 8 10 1/2 18 1/2 3 7/8 3 7/8 0.91
13.30 E75 4 3/4 2 11/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.98
X95 5 2 9/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.87
G105 5 2 7/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.86
S135 5 2 1/8 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.80
15.50 E75 5 2 9/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.97
X95 5 2 7/16 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.83
G105 5 2 1/8 4 37/64 12 8 10 1/2 18 1/2 3 7/8 3 7/8 0.90
NC40 3 1/2 EU 15.50 S135 5 1/2 2 1/4 5 1/64 11 1/2 7 10 17 3 7/8 3 7/8 0.87
4 IU 14.00 E75 5 1/4 2 13/16 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 1.01
X95 5 1/4 2 11/16 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 0.86
G105 5 1/2 2 7/16 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 0.93
S135 5 1/2 2 5 1/64 11 1/2 7 10 17 4 3/16 4 3/16 0.87
NC46 4 EU 14.00 E75 6 3 1/4 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 1.43
X95 6 3 1/4 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 1.13
G105 6 3 1/4 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 1.02
S135 6 3 5 23/32 11 1/2 7 10 17 4 1/2 4 1/2 0.94
4 1/2 IU 13.75 E75 6 3 3/8 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.20
4 1/2 IEU 16.60 E75 6 1/4 3 1/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.09
X95 6 1/4 3 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.01
G105 6 1/4 3 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.91
S135 6 1/4 2 3/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.81
4 1/2 IEU 20.00 E75 6 1/4 3 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 1.07
X95 6 1/4 2 3/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.96
G105 6 1/4 2 1/2 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.96
S135 6 1/4 2 1/4 5 23/32 11 1/2 7 10 17 4 11/16 4 11/16 0.81
NC50 4 1/2 EU 13.75 E75 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 5 1.32
16.60 E75 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 5 1.23
X95 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 5 0.97
G105 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 5 0.88
S135 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 5 0.81
20.00 E75 6 5/8 3 5/8 6 1/16 11 1/2 7 10 17 5 5 1.02
X95 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 5 0.96
G105 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 5 0.86
S135 6 5/8 3 6 1/16 11 1/2 7 10 17 5 5 0.87
5 IEU 19.50 E75 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.92
X95 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
G105 6 5/8 3 1/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.89
S135 6 5/8 3 3/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
25.60 E75 6 5/8 3 1/2 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
X95 6 5/8 3 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.86
G105 6 5/8 2 3/4 6 1/16 11 1/2 7 10 17 5 1/8 5 1/8 0.87

12 TenarisNKKTubes
 TOOL JOINT DIMENSIONS (GROUPS 1 & 3) Continued
TOOL DRILL PIPE TOOL JOINT TORSIONAL
JOINT RATIO, PIN
SIZE AND NOMIMAL GRADE OD ID BEVEL DIA. TOTAL PIN BOX COMBINED DIA. OF DIA. OF
DESIG- TO DRILL
STYLE WEIGHT OF PIN OF PIN OF PIN AND LENGTH TONG TONG LENGTH PIN AT BOX AT
NATIONS PIPE
AND BOX BOX TOOL SPACE SPACE OF PIN ELEVATOR ELEVATOR
SHOULDER JOINT PIN AND BOX UPSET UPSET
+1/64 +1/4
±1/32 -1/32 ±1/64 -3/8 ±1/4 ±1/4 ±1/2 Max Max

in lb/ft in in in in in in in in in
D D d DF LP LPB LB L DPE DTE

5 1/2 FH 5 IEU 19.50 E75 7 3 3/4 6 23/32 13 8 10 18 5 1/8 5 1/8 1.53

X95 7 3 3/4 6 23/32 13 8 10 18 5 1/8 5 1/8 1.21
G105 7 3 3/4 6 23/32 13 8 10 18 5 1/8 5 1/8 1.09
S135 7 1/4 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 0.98
25.60 E75 7 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 1.21
X95 7 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 0.95
G105 7 1/4 3 1/2 6 23/32 13 8 10 18 5 1/8 5 1/8 0.99
S135 7 1/4 3 1/4 6 23/32 13 8 10 18 5 1/8 5 1/8 0.83
5 1/2 IEU 21.90 E75 7 4 6 23/32 13 8 10 18 5 11/16 5 11/16 1.11
X95 7 3 3/4 6 23/32 13 8 10 18 5 11/16 5 11/16 0.98
G105 7 1/4 3 1/2 6 23/32 13 8 10 18 5 11/16 5 11/16 1.02
S135 7 1/2 3 7 3/32 13 8 10 18 5 11/16 5 11/16 0.96
24.70 E75 7 4 6 23/32 13 8 10 18 5 11/16 5 11/16 0.99
X95 7 1/4 3 1/2 6 23/32 13 8 10 18 5 11/16 5 11/16 1.01
G105 7 1/4 3 1/2 6 23/32 13 8 10 18 5 11/16 5 11/16 0.92
S135 7 1/2 3 7 3/32 13 8 10 18 5 11/16 5 11/16 0.86
* Note: This data is based on API RP7G (16th edition Aug. 1998)
Other tool joint dimensions available upon request.

TAPER SHOULDER SQUARE SHOULDER

L L DPE: Pin Diameter at Elevator Upset, Max.

LP DF: Bevel Diameter of Pin and Box Shoulder.
LPB LB +
LB
18º 2º d: Inside Diameter of Pin.
35º +- 2º - 0º
RSE D: Outside Diameter of Pin and Box.
LP: Total Length Tool Joint Pin.
LPB: Pin Tong space.

d Dse L: Combined Length of Pin and Box.

LB: Box tong space.
DPE d D DF d DTE
DTE: Diameter or Box at Elevator Upset Max.

Drill Pipe 13
 NEW DRILL PIPE TORSIONAL, TENSILE, COLLAPSE AND INTERNAL PRESSURE (GROUPS 1 & 3)
SIZE NOMINAL PLAIN END WALL ID SECTION POLAR TORSIONAL YIELD STRENGTH
WEIGHT WEIGHT THICKNESS AREA OF SECTIONAL
PIPE BODY MODULUS

in lb/ft lb/ft in in sq in cu in lb/ft

E X G S

2 3/8 4.85 4.43 0.190 1.995 1.3042 1.321 4,760 6,030 6,670 8,570
6.65 6.26 0.280 1.815 1.8429 1.733 6,250 7,920 8,750 11,250
2 7/8 6.85 6.16 0.217 2.441 1.8120 2.241 8,080 10,240 11,320 14,550
10.40 9.72 0.362 2.151 2.8579 3.204 11,550 14,640 16,180 20,800
3 1/2 9.50 8.81 0.254 2.992 2.5902 3.923 14,150 17,920 19,800 25,460
13.30 12.31 0.368 2.764 3.6209 5.144 18,550 23,500 25,970 33,390
15.50 14.63 0.449 2.602 4.3037 5.847 21,090 26,710 29,520 37,950
4 11.85 10.46 0.262 3.476 3.0767 5.400 19,470 24,670 27,260 35,050
14.00 12.93 0.330 3.340 3.8048 6.458 23,290 29,500 32,600 41,920
15.70 14.69 0.380 3.240 4.3216 7.157 25,810 32,690 36,130 46,460
4 1/2 13.75 12.24 0.271 3.958 3.6005 7.184 25,910 32,820 36,270 46,630
16.60 14.98 0.337 3.826 4.4074 8.543 30,810 39,020 43,130 55,450
20.00 18.69 0.430 3.640 5.4981 10.232 36,900 46,740 51,660 66,420
22.82 21.36 0.500 3.500 6.2832 11.345 40,910 51,820 57,280 73,640
5 16.25 14.87 0.296 4.408 4.3743 9.718 35,040 44,390 49,060 63,080
19.50 17.93 0.362 4.276 5.2746 11.415 41,170 52,140 57,630 74,100
25.60 24.03 0.500 4.000 7.0686 14.491 52,260 66,190 73,160 94,060
5 1/2 19.20 16.87 0.304 4.892 4.9624 12.221 44,070 55,830 61,700 79,330
21.90 19.81 0.361 4.778 5.8282 14.062 50,710 64,230 70,990 91,280
24.70 22.54 0.415 4.670 6.6296 15.688 56,570 71,660 79,200 101,830
* Note: This data is based on API RP7G (16th edition Aug. 1998)

14 TenarisNKKTubes
TENSILE STRENGTH DATA BASED ON MINIMUM VALUES COLLAPSE PRESSURE INTERNAL PRESSURE
(LOAD AT THE MINIMUM YIELD STRENGTH) (BASED ON MINIMUM VALUES) (AT MINIMUM YIELD STRENGTH)

GRADES
lb psi psi
E X G S E X G S E X G S

97,820 123,900 136,940 176,070 11,040 13,980 15,460 19,030 10,500 13,300 14,700 18,900
138,210 175,070 193,500 248,790 15,600 19,760 21,840 28,080 15,470 19,600 21,660 27,850
135,900 172,140 190,260 244,620 10,470 12,940 14,020 17,030 9,910 12,550 13,870 17,830
214,340 271,500 300,080 385,820 16,510 20,910 23,110 29,720 16,530 20,930 23,140 29,750
194,260 246,070 271,970 349,680 10,000 12,080 13,060 15,740 9,530 12,070 13,340 17,150
271,570 343,990 380,200 488,820 14,110 17,880 19,760 25,400 13,800 17,480 19,320 24,840
322,770 408,850 151,880 580,990 16,770 21,250 23,480 30,190 16,840 21,300 23,570 30,310
230,760 292,290 323,060 415,360 8,380 9,980 10,710 12,610 8,600 10,890 12,040 15,470
285,360 361,450 399,500 513,650 11,350 14,380 15,900 20,140 10,830 13,720 15,160 19,490
324,120 410,550 453,770 583,410 12,900 16,340 18,050 23,210 12,470 15,790 17,460 22,440
270,030 342,040 378,050 486,060 7,170 8,410 8,960 10,280 7,900 10,010 11,070 14,230
330,560 418,710 462,780 595,000 10,390 12,760 13,820 16,770 9,830 12,450 13,760 17,690
412,360 522,320 577,300 742,240 12,960 16,420 18,150 23,330 12,540 15,890 17,560 22,580
471,240 596,900 659,730 848,230 14,810 18,770 20,740 26,670 14,580 18,470 20,420 26,250
328,070 415,560 459,300 590,530 6,940 8,110 8,620 9,830 7,770 9,840 10,880 13,990
395,590 501,090 553,830 712,070 9,960 12,020 13,000 15,670 9,500 12,040 13,300 17,100
530,140 671,520 742,200 954,260 13,500 17,100 18,900 24,300 13,130 16,630 18,380 23,630
372,180 471,430 521,050 669,930 6,040 6,940 7,310 8,090 7,250 9,190 10,160 13,060
437,120 553,680 611,960 786,810 8,410 10,020 10,750 12,670 8,610 10,910 12,060 15,510
497,220 629,810 696,110 895,000 10,460 12,930 14,010 17,020 9,900 12,540 13,860 17,830

Drill Pipe 15
 NEW DRILL PIPE AND TOOL JOINT MECHANICAL PROPERTIES (GROUP 1)
DRILL PIPE BODY TOOL JOINT DRIFT MECHANICAL PROPERTIES
DIAMETER
NOMINAL NOMINAL APPROX. UPSET CONNECTION OD ID TENSILE YIELD TORSIONAL YIELD
SIZE WEIGHT WEIGHT TYPE
PIPE TOOL PIPE TOOL
JOINT JOINT
in lb/ft lb/ft in in in lb lb ft-lb ft-lb

2 3/8 4.85 5.26 EU NC26 (IF) 3 3/8 1 3/4 1.625 97,817 313,681 4,763 6,875.b
6.65 6.99 EU NC26 (IF) 3 3/8 1 3/4 1.625 138,214 313,681 6,250 6,875.b
2 7/8 6.85 7.50 EU NC31 (IF) 4 1/8 2 1/8 2.000 135,902 447,130 8,083 12,053.p
10.40 10.87 EU NC31 (IF) 4 1/8 2 1/8 1.963 214,344 447,130 11,554 12,053.b
10.35 IU NC26 (SH) 3 3/8 1 3/4 1.625 214,344 313,681 11,554 6,875.b
3 1/2 9.50 10.58 EU NC38 (IF) 4 3/4 2 11/16 2.563 194,264 587,308 14,146 18,107.p
13.30 13.93 EU NC38 (IF) 4 3/4 2 11/16 2.457 271,569 587,308 18,551 18,107.p
15.50 16.54 EU NC38 (IF) 5 2 9/16 2.414 322,775 649,158 21,086 20,326.p
4 11.85 13.52 EU NC46 (IF) 6 3 1/4 3.125 230,755 901,164 19,474 33,625.p
14.00 15.04 IU NC40 (FH) 5 1/4 2 13/16 2.688 285,359 711,611 23,288 23,487.p
15.85 EU NC46 (IF) 6 3 1/4 3.125 285,359 901,164 23,288 33,625.p
15.70 16.80 IU NC40 (FH) 5 1/4 2 11/16 2.653 324,118 776,406 25,810 25,673.p
17.54 EU NC46 (IF) 6 3 1/4 3.095 324,118 901,164 25,810 33,625.p
4 1/2 13.75 15.36 EU NC50 (IF) 6 5/8 3 3/4 3.625 270,034 939,096 25,907 37,676.p
16.60 17.95 EU NC50 (IF) 6 5/8 3 3/4 3.625 330,558 939,096 30,807 37,676.p
18.37 IEU NC46 (XH) 6 1/4 3 1/4 3.125 330,558 901,164 30,807 33,993.p
20.00 21.59 EU NC50 (IF) 6 5/8 3 5/8 3.452 412,358 1,025,980 36,901 41,235.p
22.09 IEU NC46 (XH) 6 1/4 3 2.875 412,358 1,048,426 36,901 39,659.p
22.82 24.11 EU NC50 (IF) 6 5/8 3 5/8 3.452 471,239 1,025,980 40,912 41,235.p
24.56 IEU NC46 (XH) 6 1/4 3 2.875 471,239 1,048,426 40,912 39,659.p
5 19.50 22.28 IEU 5 1/2 FH 7 3 3/4 3.625 395,595 1,448,407 41,167 60,338.b
20.85 IEU NC50 (XH) 6 5/8 3 3/4 3.625 395,595 939,095 41,167 37,676.p
25.60 28.27 IEU 5 1/2 FH 7 3 1/2 3.375 530,144 1,619,231 52,257 60,338.b
26.85 IEU NC50 (XH) 6 5/8 3 1/2 3.375 530,144 1,109,920 52,257 44,673.p
5 1/2 21.90 23.78 IEU 5 1/2 FH 7 4 3.875 437,116 1,265,802 50,710 56,045.p
24.70 26.30 IEU 5 1/2 FH 7 4 3.875 497,222 1, 265,802 56,574 56,045.p
* Note:This data is based on API RP7G (16th edition Aug. 1998).

NEW DRILL PIPE AND TOOL JOINT MECHANICAL PROPERTIES (GROUP 3)

DRILL PIPE BODY TOOL JOINT DRIFT MECHANICAL PROPERTIES
DIAMETER
NOMINAL NOMINAL APPROX. UPSET CONNECTION OD ID TENSILE YIELD TORSIONAL YIELD
SIZE WEIGHT WEIGHT TYPE &
PIPE TOOL PIPE TOOL
GRADE
JOINT JOINT
in. lb/ft lb/ft in. in. in. lb lb ft-lb ft-lb

2 3/8 6.65 7.11 EU-X95 NC26 (IF) 3 3/8 1 3/4 1.625 175,072 313,681 7,917 6,875.b
7.11 EU-G105 NC26 (IF) 3 3/8 1 3/4 1.625 193,500 313,681 8,751 6,875.b
2 7/8 10.40 11.09 EU-X95 NC31 (IF) 4 1/8 2 1.875 271,503 495,726 14,635 13,389.p
11.09 EU-G105 NC31 (IF) 4 1/8 2 1.875 300,082 495,726 16,176 13,389.p
11.55 EU-S135 NC31 (IF) 4 3/8 1 5/8 1.500 385,820 623,844 20,798 17,170.p
13.30 14.62 EU-X95 NC38 (IF) 5 2 9/16 2.438 343,988 649,158 23,498 20,326.p
14.71 EU-G105 NC38 (IF) 5 2 7/16 2.313 380,197 708,603 25,972 22,213.p
14.92 EU-S135 NC38 (IF) 5 2 1/8 2.000 488,825 842,440 33,392 26,515.p
15.13 EU-S135 NC40 (4FH) 5 3/8 2 7/16 2.313 488,825 897,161 33,392 29,930.p
3 1/2 15.50 16.82 EU-X95 NC38 (IF) 5 2 7/16 2.313 408,848 708,063 26,708 22,213.p
17.03 EU-G105 NC38 (IF) 5 2 1/8 2.000 451,885 842,440 29,520 26,515.p
16.97 EU-G105 NC40 (4FH) 5 1/4 2 9/16 2.438 451,885 838,257 29,520 27,760.p
17.57 EU-S135 NC40 (4FH) 5 1/2 2 1/4 2.125 580,995 979,996 37,954 32,943.p

16 TenarisNKKTubes
 NEW DRILL PIPE AND TOOL JOINT MECHANICAL PROPERTIES (GROUP 3) Continued
DRILL PIPE BODY TOOL JOINT DRIFT MECHANICAL PROPERTIES
DIAMETER
NOMINAL NOMINAL APPROX. UPSET CONNECTION OD ID TENSILE YIELD TORSIONAL YIELD
SIZE WEIGHT WEIGHT TYPE &
PIPE TOOL PIPE TOOL
GRADE
JOINT JOINT**
in lb/ft lb/ft in in in lb lb ft-lb ft-lb

4 14.00 15.34 IU-X95 NC40 (FH) 5 1/4 2 11/16 2.563 361,454 776,406 29,498 25,673.p
16.19 EU-X95 NC46 (IF) 6 3 1/4 3.125 361,454 901,164 29,498 33,625.p
15.91 IU-G105 NC40 (FH) 5 1/2 2 7/16 2.313 399,502 897,161 32,603 30,114.p
16.19 EU-G105 NC46 (IF) 6 3 1/4 3.125 399,502 901,164 32,603 33,625.p
16.19 IU-S135 NC46 (FH) 5 1/2 2 1.875 513,646 1,080,135 41,918 36,363.p
16.42 EU-S135 NC46 (IF) 6 3 2.875 513,646 1,048,426 41,918 39,229.p
15.70 17.52 IU-X95 NC40 (FH) 5 1/2 2 7/16 2.313 410,550 897,161 32,692 30,114.p
17.80 EU-X95 NC46 (IF) 6 3 1/4 3.125 410,550 901,164 32,692 33,625.p
17.52 IU-G105 NC40 (FH) 5 1/2 2 7/16 2.313 453,765 897,161 36,134 30,114.p
17.80 EU-G105 NC46 (IF) 6 3 1/4 3.125 453,765 901,164 36,134 33,625.p
18.02 EU-S135 NC46 (IF) 6 3 2.875 583,413 1,048,426 46,458 39,229.p
4 1/2 16.60 18.36 EU-X95 NC50 (IF) 6 5/8 3 3/4 3.625 418,707 939,095 39,022 37,676.p
18.79 IEU-X95 NC46 (XH) 6 1/4 3 2.875 418,707 1,048,426 39,022 39,659.p
18.36 EU-G105 NC50 (IF) 6 5/8 3 3/4 3.625 462,781 939,095 43,130 37,676.p
18.79 IEU-G105 NC46 (XH) 6 1/4 3 2.875 462,781 1,048,426 43,130 39,659.p
18.62 EU-S135 NC50 (IF) 6 5/8 3 1/2 3.375 595,004 1,109,920 55,453 44,673.p
19.00 IEU-S135 NC46 (XH) 6 1/4 2 3/4 2.625 595,004 1,183,908 55,453 44,871.p
20.00 22.08 EU-X95 NC50 (IF) 6 5/8 3 1/2 3.375 522,320 1,109,920 46,741 44,673.p
22.67 IEU-X95 NC46 (XH) 6 1/4 2 3/4 2.625 522,320 1,183,908 46,741 44,871.p
22.08 EU-G105 NC50 (IF) 6 5/8 3 1/2 3.375 577,301 1,109,920 51,661 44,673.p
22.86 IEU-G105 NC46 (XH) 6 1/4 2 1/2 2.375 577,301 1,307,608 51,661 49,630.p
23.03 EU-S135 NC50 (IF) 6 5/8 3 2.875 742,244 1,416,225 66,421 57,800.p
23.03 IEU-S135 NC46 (XH) 6 1/4 2 1/4 2.125 742,244 1,419,527 66,421 53,936.p
22.82 24.24 EU-X95 NC50 (IF) 6 5/8 3 1/2 3.375 596,903 1,109,920 51,821 44,673.p
24.77 IEU-X95 NC46 (XH) 6 1/4 2 3/4 2.625 596,903 1,183,908 51,821 44,871.p
24.72 EU-G105 NC50 (IF) 6 5/8 3 1/4 3.125 659,735 1,268,963 57,276 51,447.p
24.96 IEU-G105 NC46 (XH) 6 1/4 2 1/2 2.375 659,735 1,307,608 57,276 49,630.p
25.41 EU-S135 NC50 (IF) 6 5/8 2 3/4 2.625 848,230 1,551,706 73,641 63,406.p
5 19.50 22.62 IEU-X95 5 1/2 FH 7 3 3/4 3.625 501,087 1,448,407 52,144 60,338.p
21.45 IEU-X95 NC50 (XH) 6 5/8 3 1/2 3.375 501,087 1,109,920 52,144 44,673.p
22.62 IEU-G105 5 1/2 FH 7 3 3/4 3.625 553,833 1,448,407 57,633 60,338.b
21.93 IEU-G105 NC50 (XH) 6 5/8 3 1/4 3.125 553,833 1,268,963 57,633 51,447.p
23.48 IEU-S135 5 1/2 FH 7 1/4 3 1/2 3.375 712,070 1,619,231 74,100 72,927.p
22.61 IEU-S135 NC50 (XH) 6 5/8 2 3/4 2.625 712,070 1,551,706 74,100 63,406.p
25.60 28.59 IEU-X95 5 1/2 FH 7 3 1/2 3.375 671,515 1,619,231 66,192 60,338.b
27.87 IEU-X95 NC50 (XH) 6 5/8 3 2.875 671,515 1,416,225 66,192 56,984.b
29.16 IEU-G105 5 1/2 FH 7 1/4 3 1/2 3.375 742,201 1,619,231 73,159 72,627.p
28.32 IEU-G105 NC50 (XH) 6 5/8 2 3/4 2.625 742,201 1,551,706 73,159 63,406.b
29.43 IEU-S135 5 1/2 FH 7 1/4 3 1/4 3.125 954,259 1,778,274 94,062 76,156.b
5 1/2 21.90 24.53 IEU-X95 5 1/2 FH 7 3 3/4 3.625 553,681 1,448,407 64,233 60,338.b
25.38 IEU-G105 5 1/2 FH 7 1/4 3 1/2 3.375 611,963 1,619,231 70,994 72,627.p
26.50 IEU-S135 5 1/2 FH 7 1/2 3 2.875 786,809 1,925,536 91,278 87,341.p
24.70 27.85 IEU-X95 5 1/2 FH 7 1/4 3 1/2 3.375 629,814 1,619,231 71,660 72,627.p
27.85 IEU-G105 5 1/2 FH 7 1/4 3 1/2 3.375 696,111 1,619,231 79,204 72,627.p
27.77 IEU-S135 5 1/2 FH 7 1/2 3 2.875 894,999 1,925,536 101,833 87,341.p
* This data is based on API RP7G (16th edition Aug. 1998).
** Letter b indicates box torque; letter p, pin torque.

Drill Pipe 17
 ▲ Full automatic tensile tester ▲ NACE TM-01-77
“Method A” constant tensile
load testers

Testing facilities and R&D

Investment in R&D is a TenarisNKKTubes is All products are supported
management priority at continuously conducting by a worldwide network of
TenarisNKKTubes. Through a variety of research and licensed repair shops with
our testing center facilities in development programs online access to all relevant
Japan, Italy and Argentina, aiming to produce higher technical drawings and
Tenaris develops proprietary quality drill pipes in order specifications as well as
designs to meet the widest to introduce improved handling and running
and most demanding products and technologies services from our
customer needs. that will better serve its experienced team of field
customers. engineers.

▲ Design analysis using FEA

method

▲ Rotary fatigue tester

TenarisNKKTUBES has produced this brochure for general information only. TenarisNKKTUBES does not assume any responsibility or liability for any loss, damage, injury resulting
from the use of information and data herein. Warranties, indemnities and any other obligations will result only from the respective contracts of license or sale, as the case may be.
Please contact a TenarisNKKTUBES representative for further information.
NK DSTJTM is a trademark of TenarisNKKTUBES.
© Tenaris 2003. All rights reserved.

18 TenarisNKKTubes
 ARGENTINA MALAYSIA
Buenos Aires Kuala Lumpur
Rubén Fidalgo Amanugan Manno
[email protected] [email protected]
(54) 11 4018 2582 tel (60) 3216 48115 tel
(54) 11 4313 9280 fax (60) 3216 48117 fax
BOLIVIA MEXICO
Santa Cruz de la Sierra Veracruz
Richard Mariaca Pablo Gómez
[email protected] [email protected]
(591) 3 312 0603 tel (52) 229 989 1122 tel
(591) 3 312 0602 fax (52) 229 989 1119 fax
BRAZIL NIGERIA
São Paulo Port Harcourt
José Rey Mendez Valerio Maussier
[email protected] [email protected]
(55) 12 244 9001 tel (234) 8461 0299 tel
(55) 12 244 9004 fax (234) 8461 1859 fax
CANADA NORWAY
Calgary Stavanger
Brad Lowe Arnt Oxaas
[email protected] [email protected]
(1) 403 290 0602 tel (47) 51 44 3440 tel
(1) 403 290 0619 fax (47) 51 44 3441 fax
CASPIAN SEA RUSSIA
Baku & Atyrau Moscow
Claudio Casais Fernando Cadena
[email protected] [email protected]
(994) 1292 1411 tel (7) 095 502 1630 tel
(994) 1297 1023 fax (7) 095 937 7713 fax
CHINA SINGAPORE
Beijing Singapore
Alejandro de la Serna Sia Soon Tee
[email protected] [email protected]
(86) 10 6437 6744 tel (65) 6395 9000 tel
(86) 10 6437 6746 fax (65) 6222 4090 fax
COLOMBIA UAE
Bogota Dubai
Edgard Aguado Luis Acevedo
[email protected] [email protected]
(57) 1 636 2920 tel (97) 14 2725 394 tel
(57) 1 623 4780 fax (97) 14 2725 392 fax
ECUADOR UK
Quito Aberdeen
Roberto Amuchástegui John Mennie
[email protected] [email protected]
(59) 32 298 6240 tel (44) 1224 587 889 tel
(59) 32 298 6250 fax (44) 1224 587 422 fax
EGYPT USA
Cairo Houston
Khalil Hesham Reda Juan Carlos Agoglia
[email protected] [email protected]
(20) 2 26 86 991 tel (1) 713 767 4466 tel
(20) 2 2686 990 (1) 713 767 4444 fax
ITALY VENEZUELA
Bergamo Caracas
Antonio Zizzo Alejandro Cassullo
[email protected] [email protected]
(39) 035 560 3416 tel (58) 212 902 3969 tel
(39) 035 561 048 fax (58) 212 902 3937 fax
JAPAN
Kanagawa
Matias Orozco
[email protected]
(81) 44 328 3439 tel
(81) 44 328 3458 fax

www.tenaris.com/nkktubes Tenaris Marketing Communications

Version 01 / August 2003 ©Tenaris. All rights reserved.