MO-6700S Series

High-speed, Overlock /Safety Stitch Machine

MO-6714S

MO-6700S Series
A general-purpose advanced machine that responds to various kinds
of sewing materials and processes.
A general-purpose advanced machine that responds to various kinds
of sewing materials and processes.
The MO-6700S Series responds to
various kinds of sewing materials and
processes, producing delicate and
beautiful soft-to-the-touch seams
while further reducing operating
noise as well as increasing durability.
This is a highly advanced
cost-effective machine.

MO-6716S

The machine ensures both beautiful and upgraded

seam quality at higher speeds. Further increased reliability.
Since the machine comes with a needle-thread take-up mechanism as well The newly adopted upper and lower needle bar
as a looper thread take-up mechanism, to offer upgraded responsiveness bushings of the needle bar mechanism improve
from light- to heavy-weight materials with a lower applied tension, it achieves both the durability and reliability of the needle bar
well-tensed soft-feeling seams that flexibly correspond to the elasticity of the unit. The machine comes standard with a cartridge
material at the maximum sewing speed of 7,000rpm. type oil filter and cooling fan for further improved
reliability and durability.

Upper needle bar

bushing

Lower
needle bar
bushing
Runstitching in general fabric
MO-6714S-BE6-307

The machine has been developed with the

intention of providing an extended service life. Devices intended for conventional
The machine incorporates various mechanisms as standard, such as
a differential-feed micro-adjustment mechanism and an external JUKI machines are also interchangeable.
adjustment mechanism for adjusting the feed dog inclination as well Gauges and devices you have used with your existing
as increasing the differential feed ratio, which can be easily adjusted JUKI machines are also interchangeable with no additional
to finish seams that perfectly match the material to be used. machining. This eliminates both the waste of resources
Comfortable operation is all but guaranteed, by a wider area around and unwanted extra costs.
the needle entry, the adoption as standard of a micro-lifter feature that
offers improved responsiveness to materials and provides the operator
with upgraded operability, and by the reduction of operating noise and
vibration, which has been achieved by designing an optimally balanced
machine.

Differential-feed Micro-lifter
micro-adjustment
mechanism
■ SUBCLASS MACHINE LIST

Number Presser Max. Remarks

Number Number Needle Overedging of Stitch Bottom lifting sewing
Seams Model No. Materials of of gauge width (mm) feed dog length differential- amount Needle system speed
needles threads (mm) rows (mm) feed ratio (mm) (rpm)

< 1-needle overlock >

For runstitching in general fabric
MO-6704S-0D4-300 1 3 – 3.2 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6704S-0E4-300 1 3 – 4.0 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6704S-0F4-300 L~M 1 3 – 4.8 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6704S-0D6-300 1 3 – 3.2 3 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6704S-0F6-300 1 3 – 4.8 3 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6704S-0E4-40H 1 3 – 4.0 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6704S-0F4-40H 1 3 – 4.8 2 4 1:0.7~1:2 7 DC×27 #11 7,000
M~H Upper looper extra
MO-6704S-0E6-40H 1 3 – 4.0 3 4 1:0.7~1:2 7 DC×27 #11 7,000 high throw type

MO-6704S-0F6-50H 1 3 – 4.8 3 4 1:0.7~1:2 7 DC×27 #14 7,000

For blind hemming ★L121: Blind stitch hemming attachment

MO-6705S-0D4-210/
L~M 1 3 – 3.2 2 4 1:0.7~1:2 5.5 DC×27 #9 7,000
L121
MO-6705S-0E4-41H/ Upper looper extra
M~H 1 3 – 4.0 2 4 1:0.7~1:2 5.5 DC×27 #9 7,000
L121 high throw type

For rolled hemming (folded downward)

MO-6704S-0A4-150 1 3 – 1.6 2 4 1:0.7~1:2 5 DC×1 #8 7,000
EL~L
MO-6704S-0A5-150 1 3 – 1.6 1 4 1:0.7~1:2 5 DC×1 #8 7,000

< 2-needle overlock >

For runstitching in general fabric
MO-6714S-BD4-307 2 4 2.0 3.2 2 4 1:0.7~1:2 6.5 DC×27 #11 7,000
MO-6714S-BE4-307 2 4 2.0 4.0 2 4 1:0.7~1:2 6.5 DC×27 #11 7,000
Upper looper
MO-6714S-BD6-307 2 4 2.0 3.2 3 4 1:0.7~1:2 6.5 DC×27 #11 7,000
L~M high throw type
MO-6714S-BE6-307 2 4 2.0 4.0 3 4 1:0.7~1:2 6.5 DC×27 #11 7,000
MO-6714S-BE6-207 2 4 2.0 4.0 3 4 1:0.7~1:2 6.5 DC×27 #9 7,000
MO-6714S-BE6-20H 2 4 2.0 4.0 3 4 1:0.7~1:2 6.5 DC×27 #9 7,000
MO-6714S-BE4-40H 2 4 2.0 4.0 2 4 1:0.7~1:2 6.5 DC×27 #11 7,000 Upper looper extra
MO-6714S-BE6-40H 2 4 2.0 4.0 3 4 1:0.7~1:2 6.5 DC×27 #11 7,000 high throw type
MO-6712S-CE4-40H 2 4 2.4 4.0 2 4 1:0.7~1:2 6.5 DC×27 #11 7,000
M~H
For imitation
MO-6712S-DF6-507 2 4 3.2 4.8 3 4 1:0.7~1:2 6.5 DC×27 #14 7,000
safety-stitching
MO-6712S-DF6-50F 2 4 3.2 4.8 3 4 1:0.7~1:2 6.5 DC×27 #14 7,000 For swimsuit

For gathering ★S162: Swing-type gathering device (manual-lever operated)

MO-6714S-BE6-327/
L~M 2 4 2.0 4.0 3 3.2 1:0.9~1:2.6 6 DC×27 #11 7,000
S162

For tape attaching ★G02, G39: Tape attaching presser foot ★Q141: Tape guide

MO-6714S-BD6-347/ Upper looper

2 4 2.0 3.2 3 3.2 1:0.7~1:2 7 DC×27 #11 7,000
G39/Q141 high throw type
MO-6714S-BD6-24H/
L~M 2 4 2.0 3.2 3 3.2 1:0.7~1:2 7 DC×27 #9 7,000
G39/Q141
MO-6714S-BE6-24H/
2 4 2.0 4.0 3 3.2 1:0.7~1:2 7 DC×27 #9 7,000
G39/Q141
MO-6714S-BD6-34H/
2 4 2.0 3.2 3 3.2 1:0.7~1:2 7 DC×27 #11 7,000
G39/Q141 Upper looper extra
MO-6714S-BE6-34H/ high throw type
2 4 2.0 4.0 3 3.2 1:0.7~1:2 7 DC×27 #11 7,000
G39/Q141
M~H
MO-6714S-BE6-44H/
2 4 2.0 4.0 3 3.2 1:0.7~1:2 7 DC×27 #14 7,000
G39/Q141
MO-6714S-BE7-44H/
2 4 2.0 4.0 4 3.2 1:0.7~1:2 7 DC×27 #14 7,000
G02/Q141
 Number Presser Max. Remarks
Number Number Needle Overedging of Stitch Bottom lifting sewing
Seams Model No. Materials of of gauge width (mm) feed dog length differential- amount Needle system speed
needles threads (mm) rows (mm) feed ratio (mm) (rpm)

< Safety stitching >

For runstitching in general fabric
MO-6716S-DD6-300 2 5 3.2 3.2 3 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6716S-DE4-300 2 5 3.2 4.0 2 4 1:0.7~1:2 7 DC×27 #11 7,000
L~M
MO-6716S-DE6-300 2 5 3.2 4.0 3 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6716S-FF6-300 2 5 4.8 4.8 3 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6716S-BE4-40H 2 5 2.0 4.0 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6716S-DE4-40H 2 5 3.2 4.0 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6716S-DE4-40H/E35 2 5 3.2 4.0 2 4 1:0.7~1:2 7 DC×27 #11 7,000
MO-6716S-DE6-40H 2 5 3.2 4.0 3 4 1:0.7~1:2 7 DC×27 #11 7,000 Upper looper extra
M~H
MO-6716S-FF6-40H 2 5 4.8 4.8 3 4 1:0.7~1:2 7 DC×27 #11 7,000 high throw type
MO-6716S-DF6-50H 2 5 3.2 4.8 3 4 1:0.7~1:2 6.5 DC×27 #16 7,000
MO-6716S-FF6-50H 2 5 4.8 4.8 3 4 1:0.7~1:2 6.5 DC×27 #16 7,000
MO-6716S-FH6-50H 2 5 4.8 6.4 3 4 1:0.7~1:2 6.5 DC×27 #16 7,000

MO-6716S-FF6-60H 2 5 4.8 4.8 3 4.5 1:0.9~1:1.7 5 DC×27 #21 7,000 For jeans
H Upper looper extra
MO-6716S-FH6-60H 2 5 4.8 6.4 3 4.5 1:0.9~1:1.7 5 DC×27 #21 7,000 high throw type

For gathering ★S159: Swing-type gathering device (interlocked with pedal) ★S161: Swing-type gathering device (manual-lever operated)

MO-6716S-FF6-42H/
2 5 4.8 4.8 3 3.2 1:0.9~1:2.6 6 DC×27 #14 7,000
S159
MO-6716S-DE4-42H/ Upper looper extra
M~H 2 5 3.2 4.0 2 3.2 1:0.7~1:2 6 DC×27 #11 7,000
S161 high throw type
MO-6716S-DF6-42H/
2 5 3.2 4.8 3 3.2 1:0.7~1:2 6 DC×27 #11 7,000
S161

For rolling-in tape ★N077: Clean finish top and bottom

2-needle type for

MO-6745S-FF4-360/
L~M 2 4 4.8 4.8 2 4 1:0.7~1:2 5 DC×27 #11 7,000 double-chainstitch
N077
on pocket bags

< 3-needle safety stitching >

4.8
MO-6743S-1D6-40H 3 6 3.2 3 4 1:0.7~1:2 6.5 DC×27 #11 7,000
+2.0
4.8 Upper looper extra
MO-6743S-1D6-50H M~H 3 6 3.2 3 4 1:0.7~1:2 6.5 DC×27 #11 7,000
+2.0 high throw type
3.2
MO-6743S-2D6-40H 3 6 3.2 3 4 1:0.7~1:2 6.5 DC×27 #11 7,000
+2.0

Diversified subclass machines are available. The selection of a machine

SUBCLASS that best matches the processes in concern are permitted.

Blind hemming For gathering For rolling-in tape

MO-6705S-0E4-41H/L121 MO-6714S-BE6-327/S162 MO-6745S-ED4-360/N077
(L121: Blind stitch hemming attachment) (S162: Swing-type gathering device) (N077: Clean finish top and bottom)
■ DEVISES AND ATTACHMENTS
Model Part No. Description
[Reference]
Chain-off thread trimming device
One-touch type tape cutter Combination table of “chain-off thread suction device” and
400-44155 For 110, 115, 220, 240V “auto-lifer” which correspond to “chain-off thread trimming device”.
T039 and chain-off thread
trimming device
400-44156 For 220, 380, 415, 440V
(electromagnetic type)
MAT-040001A0 Automatic tape cutter For semi- For 110, 115, 220, 240V Chain-off Chain-off
+ chain-off thread thread thread
MAT-040002A0 sunken type For 220, 380, 415, 440V Auto-lifter
trimming device trimming suction
T040 device device
MAT-040001AA (number-off-stitch For 110, 115, 220, 240V
For fully-
control and electro- MC-8 AK101 (JUKI servomotor)
MAT-040002AA sunken type For 220, 380, 415, 440V T039
magnetic type) MC-9 –– (MC-9 is equipped with auto-lifter.)
T041S 400-60703 Pneumatic flat cutter
T042S 400-45959 Pneumatic side cutter
Pneumatic chain-off thread suction device MC-5 AK32 (any motor will do)
T040
MC-4 –– Specific to chain-off thread, pedal-operated MC-24 AK32 (any motor will do)
MC-5 –– Specific to chain-off thread
MC-8 –– Pneumatic chain-off thread + cloth chips
MC-9 –– Function of MC-8 + auto-lifter T041S MC-4 ––
MC-24 –– Pneumatic chain-off thread + cloth chips or MC-8 AK101 (JUKI servomotor)
✽The aforementioned devices are not equipped with air regulator. T042S MC-9 –– (MC-9 is equipped with auto-lifter.)
Please purchase the following components when you need to regulate air pressure.

–– PF-0552010-B0 Air regulator (F.R. unit asm.)

–– GMD-01080000×2 Fixing screw for F.R. unit asm.
–– F1021-003-000 Tube connector (male)
One-touch connector
–– GAS-12063000 ✽
✽Selection parts instead of the tube connector
Auto-lifter
AK32 GAK-320000A0 Pneumatic type (knee-operated)
AK49 GAK-490000A0 Pneumatic type (pedal-operated)
AK52 GAK-520000A0 Pneumatic type (with chain-off thread suction device)
AK101 GAK-A01000A0 Pneumatic type (for servomotor)

Model Part No. Description Feature

Gathering device
Swing-type gathering device The attachment opens with the presser foot pedal. This facilitates material
S159 MAS-159000A0
(interlocked with pedal / for safety stitch machine) setting on the machine. Furthermore, knee-control type differential-feed
Swing-type gathering device adjusting device is built in the attachment. It controls a differential-feed ratio as
S160 MAS-160000A0 desired, thereby enabling the operator to make beautiful gathers.
(interlocked with pedal / for overlock machine)
Swing-type gathering device The attachment is used to perform two different processes, joining fabric
S161 MAS-161000A0
(manual-lever operated / for safety stitch machine) process and gathering process, at a time.
Swing-type gathering device The attachment can be opened/closed by using the lever (manually operated).
S162 MAS-162000A0 The differential-feed ratio is controlled with the knee lever.
(manual-lever operated / for overlock machine)
Blind hemming device
L121 MAL-121000A0 Blind stitch hemming attachment A ruler used for blind hemming in knits
The bottom ruler moves by a necessary amount when a multi-layered part of
L123 MAL-123000A0 Spring-type folded-edge controlled blind hemming ruler
material is reached to prevent stitch deviations.
Piping folder
M056 MAM-0560J0A0 Piping folder This piping folder makes a piping first, then turns up the tape.
This attachment can be used for both “cotton bias tape with gimp” and “knit tape”.
M075 MAM-0750J0A0 Piping folder (to be used with knit tape)
The operation mode can be changed over with a fingertip control.
M076 MAM-0760N0A0 Ready-made piping folder The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm.
M077 MAM-0770M0A0 Piping folder for gathering The attachment makes gathers on the lower fabric while making decorative piping.
Guide, Ruler
H153 MAH-153000A0 Cloth edge guide ruler (for overlock machine)
A swing type edge guide.
H154 MAH-154000A0 Cloth edge guide ruler (for safety stitch machine)
This attachment is used attached on the machine head (face plate).
Q141 MAQ-141000B0 Tape guide
It is used for tapes with the width of 7mm or less.
For overedging sharp-curved sleeve bottom plackets.
S-084D MAS-084000AD Pattern guide With the guide, the machine sews the curved part of sleeve bottom plackets
smoothly along the presser foot guide pin.
Feller, Binder
K006 MAK-00601000 Upturn feller This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate.
N067 MAN-0670D0A0 Reinforcement tape attachment binder (finished width: 4mm) This binder binds the edge of a pocket bag while cutting round its periphery.
N077 MAM-0770F0A0 Binder for clean finish top and bottom With the binder, the machine simultaneously sews a pocket bag to the front and binds tape to it.
Miscellaneous
Pneumatic chain-off thread suction device Simplified device for tucking chain-off thread sewn at the beginning of sewing in
Z173 MAZ-173000A0
(for 1-needle machines) overlocked seams. (chain-off thread upper clamping method)
Pneumatic chain-off thread suction device Simplified device for tucking chain-off thread sewn at the beginning of sewing in
Z195 400-33882
(for 1-needle machines) overlocked seams. (chain-off thread lower clamping method)
131-62557 Needle cooler unit asm.
SS-4091015SP Screw
For overlock machine
WP-0371026SD Washer
Needle cooler
–– SS-7110840SP Screw
By silicon oil lubricationg unit for the needle thread.
131-63159 Needle cooler unit asm.
SS-4091015SP Screw For safety stitsch machine
WP-0371026SD Washer
131-63902 Presser
131-63456 Silicon tank asm.
Needle thread heat remover
–– 131-63803 Felt
By silicon oil lubricating unit for the needle thread.
TA-0950806R0 Rubber plug
SM-4040855SP Screw
■ SPECIFICATIONS
Model name MO-6704S MO-6714S MO-6716S
Stitch type 1-needle overlock 2-needle overlock Safety stitching
Stitch style in the U.S.A. 504 514 516
Max. sewing speed 7,000rpm
Stitch length 0.8~4mm 1.5~4mm
Needle gauge (mm) –– 2.0, 2.4, 3.2 2.0, 3.2, 4.0, 4.8, 4.8+2.0
Overedging width (mm) 1.6, 3.2, 4.0, 4.8 3.2, 4.0, 4.8 3.2, 4.0, 4.8, 6.4
Differential feed ratio For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6)
Needle bar stroke 24.5mm
Inclination angle of the needle 20°
Needle mechanism Needle bar method and upper/lower bushing
Needle DC×27 (excluding some subclass model)
Max. lift of the presser foot 7mm (excluding some subclass model)
Max. presser foot pressure 63.7N (6.5kgf)
Stitch adjusting method By push-button
Differential-feed adjusting method By lever (with micro-adjustment)
Weight of the machine head 28kg
Lubrication Automatic
Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)
Needle cooler Option
Needle thread heat remover Option
Micro-lifter Provided as standard

■ WHEN YOU PLACE ORDERS

Please note when placing orders, that the model name should be written as follows:
Stitch type U.S.A Code Type Code Device and attachment Code
1-needle overlock 504 04 Standard S Tape attaching presser foot / Tape guide G02/Q141
1-needle overlock Tape attaching presser foot (for sewing sharp curves)/ Tape guide G39/Q141
505 05
for blind hemming Blind stitch hemming attachment L121
2-needle imitation Swing-type gathering device
512 12 S159
safety stitch (interlocked with pedal / for safety stitch machine)
2-needle overlock 514 14 Swing-type gathering device
S161
2-needle safety stitch 516 16 (manual-lever operated / for safety stitch machine)
3-needle safety stitch 43 Swing-type gathering device
S162
2-needle double chain stitch 45 (manual-lever operated / for overlock machine)
Clean finish top and bottom N077

MO67 S /

Needle Overedging Special machine

Feed dog Code Material Application Code
gauge (mm) width (mm) classification
–– 1.6 2-row 0A4 Light-weight
Extra light- to
–– 1.6 1-row 0A5 materials such as Rolled hemming Standard 150
light-weight
men's shirts
–– 3.2 2-row 0D4
Light- to Runstitching Upper looper extra high throw 20H
–– 3.2 3-row 0D6 Specific to knits
medium-weight Blind hemming Standard 210
–– 4.0 2-row 0E4
Runstitching Standard 300
–– 4.0 3-row 0E6
Runstitching Upper looper high throw 307
–– 4.8 2-row 0F4
Gathering Upper looper high throw 327
–– 4.8 3-row 0F6 Light- to
For general fabrics Rolling-in tape Standard 360
2.0 3.2 2-row BD4 medium-weight
Soft-chain Standard 3F0
2.0 3.2 3-row BD6
Throat plate and feed dog
2.0 4.0 2-row BE4 Soft-chain 3F6
both provided with a lip
2.0 4.0 3-row BE6
Runstitching Upper looper extra high throw 40H
2.0 4.0 4-row BE7
Blind hemming Upper looper extra high throw 41H
2.4 4.0 2-row CE4 Specific to knits Gathering Upper looper extra high throw 42H
3.2 3.2 3-row DD6 such as sweaters
Tape attaching Upper looper extra high throw 44H
3.2 4.0 2-row DE4
Medium- to Soft-chain Upper looper extra high throw 4FH
3.2 4.0 3-row DE6
heavy-weight Runstitching Standard 500
3.2 4.8 3-row DF6 Medium- to heavy-
Runstitching Upper looper high throw 507
4.0 3.2 2-row ED4 weight materials
such as denim Runstitching Swim suits 50F
4.8 4.8 3-row FF6
Runstitching Upper looper extra high throw 50H
4.8 6.4 3-row FH6
For heavy-weight
4.8+2.0 3.2 3-row 1D6 Runstitching Upper looper extra high throw 60H
materials
3.2+2.0 3.2 3-row 2D6
HEAD OFFICE
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in

● To order, please contact your nearest JUKI distributor.

the research, development, design, sales, distribution, and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
➀The development of products and engineering processes that
EMS Accreditation ISO14001:2004 are safe to the environment
REG.NO.JSAE389 ➁Green procurement and green purchasing
RE005 089 ➂Energy conservation (reduction in carbon-dioxide emissions)
➃Resource saving (reduction of papers purchased, etc.)
➄Reduction and recycling of waste
➅Improvement of logistics efficiency (modal shift and improvement
of packaging, packing, etc.)

8-2-1, KOKURYO-CHO, CHOFU-SHI,

TOKYO 182-8655, JAPAN
PHONE : (81) 3-3480-2357, 2358
FAX : (81) 3-3430-4909
MARKETING & SALES H.Q. http://www.juki.com
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalogue prints with environment-friendly soy ink on recycle paper.
OCTOBER, 2008 Printed in Japan(A)