EARTHQUAKE MEASUREMENTS

The vibrations produced by earthquakes are detected, recorded, and measured by

instruments call seismographs1. The zig-zag line made by a seismograph, called a
"seismogram," reflects the changing intensity of the vibrations by responding to the
motion of the ground surface beneath the instrument. From the data expressed in
seismograms, scientists can determine the time, the epicenter, the focal depth, and
the type of faulting of an earthquake and can estimate how much energy was
released.

Seismograph/Seismometer

Earthquake recording instrument, seismograph has a base that

sets firmly in the ground, and a heavy weight that hangs free2.
When an earthquake causes the ground to shake, the base of
the seismograph shakes too, but the hanging weight does not.
Instead the spring or string that it is hanging from absorbs all
the movement. The difference in position between the
shaking part of the seismograph and the motionless part is Seismograph
what is recorded.

Measuring Size of Earthquakes

The size of an earthquake depends on the size of the fault and the amount of slip on
the fault, but that’s not something scientists can simply measure with a measuring
tape since faults are many kilometers deep beneath the earth’s surface. They use
the seismogram recordings made on the seismographs at the surface of the earth to
determine how large the earthquake was. A short wiggly line that doesn’t wiggle
very much means a small earthquake, and a long wiggly line that wiggles a lot
means a large earthquake2. The length of the wiggle depends on the size of the
fault, and the size of the wiggle depends on the amount of slip.
The severity of
an earthquake can
be expressed in
terms of both
intensity and
3
magnitude .

However, the two

terms are quite Example of a seismogram
Source: http://darkwing.uoregon.edu/~drt/Classes/201_99/Rice/Seismology.html
different, and
they are often confused. Magnitude is related to the amount of seismic energy
released at the hypocenter of the earthquake whereas intensity is based on the
observed effects of ground shaking on people, buildings, and natural features. The
intensity of shaking from an earthquake varies depending on where you are during
the earthquake.

Magnitude

The magnitude is a number that characterizes the relative size of an earthquake.

Magnitude is based on measurement of the maximum motion recorded by a
seismograph4. Several scales have been defined, but the most commonly used are
(1) local magnitude (ML), commonly referred to as "Richter magnitude," (2)
surface-wave magnitude (Ms), (3) body-wave magnitude (Mb), and (4) moment
magnitude (Mw). Scales 1-3 have limited range and applicability and do not
satisfactorily measure the size of the largest earthquakes. The moment magnitude
(Mw) scale, based on the concept of seismic moment, is uniformly applicable to all
sizes of earthquakes but is more difficult to compute than the other types. All
magnitude scales should yield approximately the same value for any given
earthquake.

Intensity Scale

It manifests the degree of damage, which gets diminished as we go away from the
main shock source zone and the reverse is also true5. There are several earthquake
intensity scales, which can be referred from the relevant pages.
  European
http://en.wikipedia.org/wiki/European_Macroseismic_Scale

 USA (MM)
http://en.wikipedia.org/wiki/Mercalli_intensity_scale

 Japan (JMA)
http://en.wikipedia.org/wiki/Japan_Meteorological_Agency_seismic_intensi
ty_scale

The Richter scale3

The Richter magnitude scale was developed in 1935 by Charles F. Richter of the
California Institute of Technology as a mathematical device to compare the size of
earthquakes. The magnitude of an earthquake is determined from the logarithm of
the amplitude of waves recorded by seismographs. Adjustments are included in the
magnitude formula to compensate for the variation in the distance between the
various seismographs and the epicenter of the earthquakes. On the Richter Scale,
magnitude is expressed in whole numbers and decimal fractions. For example, a
magnitude of 5.3 might be computed for a moderate earthquake, and a strong
earthquake might be rated as magnitude 6.3. Because of the logarithmic basis of
the scale, each whole number increase in magnitude represents a tenfold increase
in measured amplitude; as an estimate of energy, each whole number step in the
magnitude scale corresponds to the release of about 31 times more energy than the
amount associated with the preceding whole number value.

Richter Magnitude and its example5

Richter Approximate Joule Example

Approximate TNT for equivalent
Magnitude Seismic
Energy
Yield
0.0 1 kg (2.2 lb) 4.2 MJ
0.5 5.6 kg (12.4 23.5 MJ Large Hand grenade
lb)
1.0 32 kg (70 lb) 134.4 MJ Construction site blast
1.5 178 kg (392 747.6 MJ WWII conventional bombs
lb)
2.0 1 metric ton 4.2 GJ Late WWII conventional bombs
2.5 5.6 metric 23.5 GJ WWII blockbuster bomb
tons
3.0 32 metric tons 134.4 GJ Massive Ordnance Air Blast bomb
3.5 178 metric 747.6 GJ Chernobyl nuclear disaster, 1986
tons
4.0 1 kiloton 4.2 TJ Small atomic bomb
4.5 5.6 kilotons 23.5 TJ
5.0 32 kilotons 134.4 TJ Nagasaki atomic bomb (actual seismic yield
was negligible since it detonated in the
atmosphere. The Hiroshima atomic bomb was
15 kilotons )
Lincolnshire earthquake (UK), 2008
5.4 150 kilotons 625 TJ 2008 Chino Hills earthquake (Los Angeles,
United States)
5.5 178 kilotons 747.6 TJ ittle Skull Mtn. earthquake (NV, USA), 1992
Alum Rock earthquake (CA, USA), 2007
6.0 1 megaton 4.2 PJ Double Spring Flat earthquake (NV, USA),
1994
6.5 5.6 megatons 23.5 PJ Rhodes (Greece), 2008
6.7 16.2 megatons 67.9 PJ Northridge earthquake (CA, USA), 1994
6.9 26.8 megatons 112.2 PJ San Francisco Bay Area earthquake (CA,
USA), 1989
7.0 32 megatons 134.4 PJ
7.1 50 megatons 210 PJ Energy released is equivalent to that of Tsar
Bomba, the largest thermonuclear weapon ever
tested.
7.5 178 megatons 747.6 PJ Kashmir earthquake (Pakistan), 2005
Antofagasta earthquake (Chile), 2007
7.8 600 megatons 2.4 EJ Tangshan earthquake (China), 1976`
8.0 1 gigaton 4.2 EJ Toba eruption 75,000 years ago; which,
according to the Toba catastrophe theory,
affected modern human evolution
San Francisco earthquake (CA, USA), 1906
Queen Charlotte earthquake (BC, Canada),
1949
 México City earthquake (Mexico), 1985
Gujarat earthquake (India), 2001
8.5 5.6 gigatons 23.5 EJ Sumatra earthquake (Indonesia), 2007
9.0 32 gigatons 134.4 EJ Lisbon Earthquake (Lisbon, Portugal), All
Saints Day, 1755
9.2 90.7 gigatons 379.7 EJ Anchorage earthquake (AK, USA), 1964
9.3 114 gigatons 477 EJ Indian Ocean earthquake, 2004 (40 ZJ in this
case)
9.5 178 gigatons 747.6 EJ Valdivia earthquake (Chile), 1960 (251 ZJ in
this case)
10.0 1 teraton 4.2 ZJ Never recorded.

Richter Magnitudes and Earthquake effects5

Richter Description Earthquake Effects Frequency of

Magnitudes Occurrence
< 2.0 Micro Microearthquakes, not felt. About 8,000
per day
2.0-2.9 Minor Generally not felt, but recorded. About 1,000
per day
3.0-3.9 Minor Often felt, but rarely causes damage. 49,000 per year
(est.)
4.0-4.9 Light Noticeable shaking of indoor items, 6,200 per year
rattling noises. Significant damage (est.)
unlikely.
5.0-5.9 Moderate Can cause major damage to poorly 800 per year
constructed buildings over small regions.
At most slight damage to well-designed
buildings.
6.0-6.9 Strong Can be destructive in areas up to about 120 per year
160 kilometres (100 mi) across in
populated areas.
7.0-7.9 Major Can cause serious damage over larger 18 per year
areas.
8.0-8.9 Great Can cause serious damage in areas several 1 per year
hundred miles across.
9.0-9.9 Great Devastating in areas several thousand 1 per 20 years
miles across.
10.0+ Epic Never recorded Extremely rare
 (Unknown)

The Moment Magnitude Scale6

Unfortunately, many scales, such as the Richter scale, do not provide accurate
estimates for large magnitude earthquakes. Today the moment magnitude scale,
abbreviated MW, is preferred because it works over a wider range of earthquake
sizes and is applicable globally. The moment magnitude scale is based on the total
moment release of the earthquake. Moment is a product of the distance a fault
moved and the force required to move it. It is derived from modeling recordings of
the earthquake at multiple stations. Moment magnitude estimates are about the
same as Richter magnitudes for small to large earthquakes. But only the moment
magnitude scale is capable of measuring M8 (read ‘magnitude 8’) and greater
events accurately.

Modified Mercalli Intensity Scale

Another way to measure the strength of an earthquake is to use the Mercalli scale.
Invented by Giuseppe Mercalli in 1902, this scale uses the observations of the
people who experienced the earthquake to estimate its intensity6. This scale,
composed of 12 increasing levels of intensity that range from imperceptible
shaking to catastrophic destruction, is designated by Roman numerals 3. It does not
have a mathematical basis; instead it is an arbitrary ranking based on observed
effects. The Modified Mercalli Intensity value assigned to a specific site after an
earthquake has a more meaningful measure of severity to the nonscientist than the
magnitude because intensity refers to the effects actually experienced at that place.

References

1
http://pubs.usgs.gov/gip/earthq1/measure.html
2
http://earthquake.usgs.gov/learn/kids/eqscience.php
3
http://pubs.usgs.gov/gip/earthq4/severitygip.html
4
http://earthquake.usgs.gov/learn/glossary/?term=magnitude
5
http://www.saarc-sadkn.org/about_earthquake.aspx
6
http://www.geo.mtu.edu/UPSeis/intensity.html