Government of Karnataka

Department of Technical Education

Board of Technical Examinations, Bengaluru
Course Title : ANALOG COMMUNICATION Course Code : 15EC33T
Semester : Third Credits :4
Teaching Scheme in Hrs (L:T:P) : 4:0:0 Course Group : Core
Type of course : Lecture Total Contact Hours : 52
CIE : 25 Marks SEE : 100 Marks

Prerequisites
Basic knowledge of semiconductor devices and basic principles of electrical and electronics
Course Objectives
1. Apply the basic knowledge of BEEE theory and analyze the network theorems
2. Understand the functioning and application of resonance, filters and attenuator circuits
3. Describe the working of analog modulation and demodulation circuits
4. Understand transmission lines and matching networks
Course Outcomes
On successful completion of the course, the students will be able to attain the following COs:
Course Outcome CLLinked POs Teaching Hrs
CO1 Analyze and apply the network theorems. R/U/A 1,2,3,10 10
CO2 Design the simple filters and attenuator R/U/A 1,2,3,10 11
circuits.
CO3 Describe the operation of transmission lines R/U/A 1,2,3,10 07
and matching networks
CO4 Describe and distinguish of analog
R/U/A 1,2,3,10 07
modulation techniques.
C05 Differentiate types of antennas and wave R/U/A 1,2,3,10 09
propagation.
Decide the appropriate modulation and
C06 demodulation technique for suitable R/U/A 1,2,3,10 08
transmitter and receiver circuit.
Total 52
Legends: PO-Program Outcome, CO-Course Outcome, CL-Cognitive Level, R-Remember, U-Understand, A-Apply
Course-PO attainment matrix

Programme Outcomes
Course
1 2 3 4 5 6 7 8 9 10
Analog
3 3 3 -- -- -- -- -- -- 3
Communication
Level 3- Highly Addressed, Level 2-Moderately Addressed, Level 1-Low Addressed.
Method is to relate the level of PO with the number of hours devoted to the COs which address the given PO.
If >40% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 3
If 25 to 40% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 2
If 5 to 25% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 1
If < 5% of classroom sessions addressing a particular PO, it is considered that PO is considered not-addressed.

Directorate of Technical Education Karnataka State 15EC33T Page 1

 Course content and pattern of marks for SEE

Questions for
Teaching SEE Weightage
Unit Unit Name Marks
Hours (%)
R U A
1 Network Theorems 10 05 10 15 30 20
Resonance, Filters and
2 11 05 10 15 30 20
attenuators
3 Transmission Lines 07 05 05 10 20 12
Antennas and Wave
4 07 05 05 10 20 12
Propagation
Amplitude Modulation and
5 9 05 10 10 25 15
demodulation
Frequency Modulation and
6 08 05 05 10 20 15
demodulation
Total 52 30 45 70 145 100
Legend: R- Remember, U-Understand A-Application

Course Contents

Unit 1: Network Theorems 10 Hours

Network Theorems: Superposition theorem, Thevenin's theorem, Maximum Power
Transfer theorem and Norton’s theorem, Statements and simple problems.
Unit 2: Resonance, filters and attenuators 11 Hours
Resonance: Definition, types, applications of resonance. Series resonance and Parallel
resonance: circuit diagram, phasor diagram, resonance plot and characteristics. Condition for
resonance. Derivation for frequency of resonance. Expressions for impedance, current,
voltage, Q factor, power factor and bandwidth in terms of Q. Simple problems. Passive
Filters: Definition of Filter, cut-off frequency, pass band and stop band. Classification of
filters. Ideal characteristics curve of passive LPF, HPF, BPF and BRF. Circuit diagram of T
and PI configurations of LPF and HPF (Only expressions, No Derivation), Simple problems.
Block diagrams to realize BPF & BRF using LPF & HPF.
Attenuators: Definition, classification and applications of attenuators. Definition of Bel,
Decibel and Neper. Relationship between Bel, Decibel and Neper. Express attenuation in dB.
Circuit diagram of symmetrical T and Π type attenuators (Only expressions, No Derivation).

Unit 3: Transmission lines 07 Hours

Transmission Lines: Definition of transmission line, different types of transmission lines
(power lines, Parallel wire, coaxial, Wave guide). Mention their applications. Electrical
model of a transmission line, Definition of primary constants: R, L, G and C. Definition
of secondary constants: Characteristic impedance and Propagation Constant, expressions for
secondary constants in terms of primary constants. Concept of reflection and standing waves,
expressions for standing wave ratio, reflection coefficient, standing wave ratio in terms of

Directorate of Technical Education Karnataka State 15EC33T Page 2

reflection coefficient and reflection coefficient in terms of standing wave ratio. Wave patterns
for Voltage & Current on Short circuited line and Open circuited line. Impedance matching
techniques: Single stub matching and double stub matching
Unit 4: Antennas and wave propagation 07 Hours
Antennas: Definition of antenna and dipole. Concept of electric and magnetic fields in a
dipole. Definition of Polarization, Isotropic radiator, Radiation pattern, Directive gain,
Directivity, Power gain, Antenna resistance, Antenna efficiency, Beam width. Array
antenna: Definition and types of array antenna, working of broadside, end-fire array,
mention their applications. Features of yagi-uda antenna. Working of Parabolic reflector
(Dish Antenna) – Feed mechanisms – Cassegrain and Horn feed. Wave Propagation:
Fundamentals of Electromagnetic Waves, electromagnetic spectrum, modes of wave
propagation: ground wave propagation, sky wave propagation and space wave propagation.
Comparison of modes of wave propagation.
Unit 5: Amplitude modulation and demodulation 09 Hours
Modulation: Block diagram of electronic communication system, distinguish between
analog and digital communication, define modulation, need for modulation and types of
analog modulation techniques. Amplitude modulation and demodulation: definition, block
diagram and waveform, expressions of modulating signal, Carrier signal, modulated signal,
modulation index in terms of modulating voltage (Vm) and carrier voltage (Vc), modulation
index in terms of maximum voltage (Vmax) and minimum voltage (Vmin), modulation index
in case of simultaneous modulations, LSB and USB, Bandwidth, Power in AM wave. Solve
simple problems. Amplitude Modulator circuit using diode. Demodulation of AM wave,
working of AM Linear diode detector circuit. Definition with working principal of SSBSC,
DSBSC, VSB and comparison between them.
Unit 6: Frequency modulation and demodulation 08 Hours
Frequency Modulation and demodulation: definition, block diagram and waveform,
expressions of frequency deviation, modulation index. Relationship between frequency
deviation and modulation index. Carson's rule for bandwidth. Varactor diode method of
generating FM. FM detectors: Foster Seeley discriminator and Ratio detector. Need for pre-
emphasis and de-emphasis circuits. Merits and demerits of FM over AM, Definition of Phase
modulation. Definition of Selectivity, Sensitivity, Gain, Fidelity, Image Frequency and its
Rejection, Double Spotting, Noise Figure.
References
1. Electrical Engineering Fundamentals, by Vincent Del Toro, Prentice-hall of India Pvt. Ltd.
ISBN: 0132471310, 9780132471312
2. Communication Engineering, by Vijayachitra, McGraw Hill Education (India) Private Limited;
First edition (1 May 2013), ISBN: 1259006867, 9781259006869
3. Basic Electrical Engineering, by D.P. Kothari and I.J. Nagrath, Tata McGraw-Hill Publishing
Pvt. Ltd. ISBN: 0070435898, 9780070435896
4. Electronic Communication systems by William Schweber, Fourth Edition PHI Publications
ISBN: 0130916218, 9780130916211
5. Electronic Communication by Dennis Roddy and John Coolen PHI Publications
ISBN: 8177585584, 9788177585582

Directorate of Technical Education Karnataka State 15EC33T Page 3

 6. Analog and Digital Communications – T L Singal, McGraw Hill Education
7. ISBN: 1259084523, 9781259084522
8. http://nptel.ac.in/courses/117102059/
9. https://www.youtube.com/watch?v=Xw2_AWWjAn0
10. https://www.youtube.com/watch?v=UW_X2sfwA5w
11. https://www.youtube.com/watch?v=dGu2mxpTRPs
12. https://www.youtube.com/watch?v=hqhV50852jA
13. https://www.youtube.com/watch?v=ZYgFuUl9_Vs
14. https://www.youtube.com/watch?v=m9ikRi_-Iqo
15. https://www.youtube.com/watch?v=eNmh_G_v_-o
16. https://www.youtube.com/watch?v=wegmG4qHvkk
17. https://www.youtube.com/watch?v=_5JyiFWLn-w
18. https://www.youtube.com/watch?v=SmW4z76KgNQ&spfreload=10
19. https://www.youtube.com/watch?v=R04yEKqgGPc

Course Delivery
The course will be delivered through lectures, presentations and support of modern tools.
Student activities are off-class.
Course Assessment and Evaluation Scheme

Master Scheme

Assessment
Assessment To mode Max. Evidence
What Course Outcomes
Method Whom /Frequency Marks Collected
/timing
Three tests+ 20 Blue Books 1 to 6
CIE IA Activity
assessment

Students

Activity* 05 1 to 6
Direct

Sheets
End of the Answer Scripts
End 100 1 to 6
SEE course at BTE
exam
Total 125
Student
Middle of Feedback 1 to 3 Delivery of
feedback on Nil
the Course Forms course
assessment

course
Students
Indirect

1 to 6, Effectiveness
End of
End of the Question- of delivery
course Nil
Course naires instructions &
survey
assessment methods
Legends: CIE-Continuous Internal Evaluation, SEE- Semester End-exam Evaluation
+
Every I.A. test shall be conducted for 20 marks. Average of three tests, by rounding off any fractional
part thereof to next higher integer, shall be considered for IA.
*Students should do activity as per the list of suggested activities/ similar activities with prior approval
of the teacher. Activity process must initiated well in advance so that it can be completed well before
the end of the term.

Directorate of Technical Education Karnataka State 15EC33T Page 4

Questions for CIE and SEE will be designed to evaluate the various CLs as per the weightage
shown in the following table.
Sl. No. Cognitive Levels (CL) Weightage (%)
1 Remembering 20
2 Understanding 30
3 Applying 50
Total 100

Continuous internal evaluation (CIE) pattern

(i) Student Activity (5 marks)

The following student activities or similar activities can be assigned for assessing CIE/IA
marks
Sl. No. Activity
Visit any local small-scale industry and prepare work flow of any specific electronic
1
module preparation- from discrete components to module fabrication.
2 Design, construct and demonstrate any resonant circuit
Prepare a document on different antennas and tabulate the specific details of each /
3
datasheets/ application
4 Demonstrate Amplitude modulation and demodulation
5 Demonstrate / presentation / simulation how Radio works
6 Demonstrate / presentation / simulation how LED TV works
Prepare/collect animation video of wave propagation and fundamentals of
7
Electromagnetic Waves and give presentation on it.
8 List different wave propagations and give presentation on it.
Execution Note:
1. Maximum of 2 students in each batch for student activity
2. Any two activities (either from the list given or any similar activities) shall be assigned among different
batches; may be assigned by the teacher based on interest of the students.
3. Project activities shall be carried out throughout the semester and present the project report at the end of the
semester; concerned teacher is expected to observe and record the progress of students’ activities
4. Submit qualitative hand-written report not exceeding 6 pages; one report per batch
5. Each of the activity can be carried out off-class well in advance; however, demonstration/presentation should
be done during laboratory sessions
6. Assessment shall be based on quality of work as prescribed by the following rubrics table

Directorate of Technical Education Karnataka State 15EC33T Page 5

 (ii) Model of rubrics for assessing student activity

Scale
Marks
Dimension 1 2 3 4 5
(Example)
Unsatisfactory Developing Satisfactory Good Exemplary
Collects a
Collects Collects Collects
1. Research Does not great deals
very limited basic more
and collect of
information, information, information, 3
gathering information information,
some relate most refer to most refer
information relate to topic all refer to
to topic the topic to the topic
the topic
Does not
Performs all
2. Full-fills perform any Performs Performs Performs
duties of
team roles duties assigned very little nearly all almost all 2
assigned
and duties to the team duties duties duties
team roles
role
Usually Always Always does
Rarely does
does the does the the assigned
3. Shares Always relies the assigned
assigned assigned work,
work on others to do work, often 5
work, rarely work, rarely without
equality the work needs
needs needs needing
reminding
reminding reminding. reminding
Usually
does most
Is always of the Listens, but Listens and
4. Listen to Listens and
talking, never talking, sometimes talks a little
other team talks a fare 3
allows anyone rarely talk too more than
mates amount
to else to speak allows much, needed.
others to
speak
ceil(13/4)=
Total marks
4

(iii) CIE/IA Tests (20 Marks)

Three tests have to be conducted, during specified schedule, in accordance with the test
pattern given below and their average-marks shall be considered for CIE/IA.
(iv) Format of CIE/IA test question paper
CIE Question Paper
Institution Name and Code
Course Co-ordinator/Teacher
Program Name Test No. Units
Class/Sem Date CL
Course Name Time COs
Course Code Max. Marks POs
Note to students: Answer all questions
Question No. Question Marks CL CO PO
1
2
3
4
Legends: PO-Program Outcome, CO-Course outcome, CL-Cognitive Level, R-Remember, U-Understand, A-Apply
Note: Internal choice may be given in each CO at the same cognitive level (CL).

Directorate of Technical Education Karnataka State 15EC33T Page 6

 (v) Model question paper for CIE
CIE Question Paper
Institution Name and
Code
Course Co-
ordinator/Teacher
Program Name Electronics and Communication Test No. 1 Units 1&2
Class/Sem 3rd Sem Date 1/1/2017 CL R/U/A
Course Name Analog Communication Time 10-11AM COs 1&2
Course Code 15EC33T Max. Marks 20 POs 1, 2 & 3
Note to students: Answer all questions
No. Question Marks CL CO PO
State and explain Thevenin’s theorem with an example
1 Or 5+5 U/A 1 1,2,3
State and prove Maximum Power transfer theorem with an
example
05 R/A 2 1,2
2 Define resonance, mention types and its applications
Derive expression for frequency of resonance for series 05 A 2 1,2
3
resonance circuit
05 A 2 1,2
4

Semester end-exam evaluation (SEE)

(i) End-exam question-paper pattern
Study No. Questions for end-exam
Unit Unit Name Duration PART – A PART – B Marks
(Hrs.) 5 Marks 10 Marks
1 Network theorems 10 02 02 30
2 Resonance, filters and attenuators 11 02 02 30
3 Transmission lines 07 02 01 20
4 Antenna and wave propagation 07 02 01 20
Amplitude Modulation and
5 09 01 02 25
demodulation
Frequency Modulation and
6 08 00 02 20
demodulation
52 09 10 145
Total
(45 Marks) (100 Marks)

Note:. Sub-questions on different CLs may be combined to frame 10-marks questions or 10-marks
questions given here can be splitted into 5-marks questions if necessary keeping weightage of CLs
approximately intact and adhering to SEE end-exam pattern

Directorate of Technical Education Karnataka State 15EC33T Page 7

(ii) Model question paper
Course Title : ANALOG COMMUNICATION
Course Code : 15EC33T Time : 3 Hrs
Semester : Third Max. Marks: 100
Instructions: 1. Answer any SIX question from Part A (5x6=30 Marks)
2. Answer any SEVEN full questions from Part B (7x10=70 Marks)

Part-A

1. Employ the suitable circuit and describe it with respect to superposition theorem
2. State the relevance of Maximum Power Transfer theorem with suitable circuit
diagram
3. Define resonance, mention types and its application
4. Whether the curve represents the response of the circuit given below. Justify why
current is maximum at resonance.

5. Write a note on single-stub matching and double-stub matching.

6. Point out the working of parabolic reflector (Dish Antenna) – Feed mechanisms –
Cassegrain and Horn feed.
7. Compare the modes of wave propagation.
8. Distinguish analog and digital modulation technique.
9. Write a short note on FM detectors.

Part-B
1. Problem on Thevenin's theorem
2. Illustrate the application of the Norton’s theorem with an example.
3. Derive expression for frequency of resonance, Q factor, power factor and bandwidth
4. (a)Realize BPF & BRF using LPF & HPF
(b)Problem on attenuator
5. Discuss the concepts of reflection and standing waves, expressions for standing wave
ratio
6. With relevant expression/figures define Polarization, Isotropic radiator,
Radiation pattern, Directive gain, Directivity, Power gain, Antenna resistance,
Antenna efficiency, Beam width.
7. (a)Derive modulation index in terms of Vmax and Vmin
(b)Compare SSBSC, DSBSC and VSB
8. Identify the modulation technique described by the following equation. Also sketch
the waveform and block diagram that can generate the waveform.
S(t) = Vm1(t) Cos(wct) + Vm2(t) Cos(wct + 900)

Directorate of Technical Education Karnataka State 15EC33T Page 8

 9. Define the phase modulation of Selectivity, Sensitivity, Gain, Fidelity , Image
Frequency and its Rejection, Double Spotting, Noise Figure
10. (a)Write and explain Varactor diode method for generating FM
(b) Explain need for pre-emphasis and de-emphasis along with circuits.

Institutional activities (No marks)

The following are suggested institutional activities, to be carried out at least one during the
semester. The course teacher/coordinator is expected to maintain the relevant record
(Containing, Activity name, Resource persons and their details, duration, venue, student
feedback, etc) pertaining to Institutional activities.

Sl. No. Activity

1 Organize Seminar, workshop or Lecture from experts on the modern trends in
communication
2 One day visit to nearby industry/ electronic equipment service centre/radio
station/TV station/ Microwave tower
3 Motivation class for the students to take case study on different communication-
based mini projects (small applications) to inculcate self and continuous learning.

End

Directorate of Technical Education Karnataka State 15EC33T Page 9