Scribd
Upload
311 views

Proreact Linear Heat

The document describes the ProReact Analogue Heat Detector system which consists of a control module and detection cable. The cable monitors temperature changes along its length to detect fires. The system has adjustable temperature alarm ranges and outputs. It can accommodate various cable coatings and lengths for different environments. The document also lists order codes for cables, control units, and non-combustible cable supports including clips and ties made of zinc or stainless steel.

Uploaded by

Alexandru Craiovan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
311 views

Proreact Linear Heat

The document describes the ProReact Analogue Heat Detector system which consists of a control module and detection cable. The cable monitors temperature changes along its length to detect fires. The system has adjustable temperature alarm ranges and outputs. It can accommodate various cable coatings and lengths for different environments. The document also lists order codes for cables, control units, and non-combustible cable supports including clips and ties made of zinc or stainless steel.

Uploaded by

Alexandru Craiovan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

4.

19Linear Heat Detection

ProReact Analogue Heat Detector


Features
• Alarm & Pre-Alarm temperature ranges from 54-100°C
• Programmable on-site adjustment of sensitivity.
• Up to 500 m continuous length
• Alarm hot-spot length equal to 3% of zone length
• Separate Alarm and Pre-alarm volt-free outputs
• No nomograms or other scales to interpret
• Simple, 3-Step Installation:
• Ambient temperature compensation maintains alarm
temperature accuracy
• Self-Restorable after fire event up to 125°C
ProReact Analogue Heat Detector system consists of a • Flexible cable for easy mechanical installation
control module and four core detection cable designed • Reliable signalling of open and short circuit conditions
to interface to a conventional fire alarm panel or DIM800 • Extrusion and Braiding options to satisfy both
or DDM800 addressable module. The control module mechanical and environmental conditions
monitors the resistance of specially doped polymers
within the sensor cable which change as a function of
temperature. An abnormal change in resistance along the
Order Codes
detection cable triggers either a Pre- Alarm or Alarm on 516.016.019 ProReact Analogue Cable PVC order in
the interface module. multiples of 200
  516.016.020 ProReact Analogue Cable PVC order in
The system is intended to simplify system design multiples of 500
and be uncomplicated and straightforward to install. 516.016.021 ProReact Analogue Cable with additional
Commissioning of the controller can be done using a Polypropylene coating order in multiples of
laptop computer or through an optional built-in self- 200
programming module. The sensor cable has been 516.016.022 ProReact Analogue Cable Polypropylene
designed to be physically and electronically rugged to coating order in multiples of 500
suite a range of environments with options for PVC, 516.016.023 ProReact Analogue Cable Nylon coating
Polypropylene or Nylon coatings or a strong stainless order in multiples of 200
steel braid. 516.016.024 ProReact Analogue Cable Nylon coating
order in multiples of 500
The ProReact technology offers an alternative solution
516.016.025 ProReact Analogue Cable Stainless Steel
to heat protection in a wide range of applications and
Braid order in multiples of 200
industries, from power generation to oil and gas.
516.016.026 ProReact Analogue Cable Stainless Steel
Braid order in multiples of 500
Control Units
516.016.016 ProReact ProReact Analogue Controller
with display including EOL unit
516.016.017 ProReact ProReact Analogue Controller
including EOL unit
516.016.018 End of line unit (Spare)
4.20
Linear Heat Detection

Linear Heat Detection Non-Combustible Cable


Supports

Installation standards such as BS5839 part 1 specify non-


combustible cable supports and this requirement extends Order Codes
to linear heat sensor cable. To satisfy this requirement 516.016.220 Dual Height L cable clip 100 mm Zintec
the ProReact Analogue Heat Detector range includes a Standard L Clip 50 mm Zintec
range of fixings in either Zintec or Stainless Steel and 516.016.221 Channel bracket for attaching LHD cable
compatible cable ties. to flat surface Zintec
516.016.222 V-clip for cable trays Spring Stainless
Steel
516.016.223 L clip with edge clip Zintec
516.016.224 Clip extension for use with other clips
where required Zintec
516.016.225 Dual Height L cable clip 100 mm Stainless
Steel
516.016.230 Standard L Clip 50 mm Stainless Steel
516.016.231 Channel bracket for attaching LHD cable
to flat surface Stainless Steel
516.016.232 L clip with edge clip Stainless Steel
516.016.234 Clip extension for use with other clips
where required Stainless Steel
516.016.235 110°C indoor/outdoor cable tie UV &
516.016.236 Heat Stabilised Pack of 100
516.016.237 170°C indoor tie wrap Not UV stabilised
Pack of 100
516.016.238 170°C indoor/outdoor stainless steel tie
wrap Pack of 100

You might also like