Contents

Features and Benefits / Common Applications . . . . . . . . . . . . . . . . . . .3

Configurations and Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Engineering Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Application Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mounting Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Quick Model Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Product Specifications - SCW Worm Gear Series
SCW02 & SCW03 Series 2-3 Ton Capacity . . . . . . . . . . . . . . . . .12
SCW05 Series 5 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .14
SCW10 Series 10 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .16
SCW20 Series 20 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .18
SCW25 Series 25 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .19
Product Specifications - SCN Helical and Helical Bevel Gear Series
SCN03 Series 3 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .20
SCN06 Series 6 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .24
SCN12 Series 12 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .28
SCN25 Series 25 Ton Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .32
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Terms of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

NOTE
Duff-Norton has made every effort to ensure that the information
contained in this publication is accurate and reliable. Determining
the suitability of our products for specific applications is the user’s
responsibility.

WARNING
The equipment shown in this catalog is intended for industrial use only and
should not be used to lift, support, or otherwise transport people unless you
have a written statement from Duff-Norton, which authorizes the specific
actuator used in your applications as suitable for moving people.

2 For additional assistance, contact our Application Engineers at (800) 477-5002.

 Duff-Norton offers the new SCN Series F e a t u re s
SuperCylinders™ in addition to the already popular
SCW Series. The SCN Series combines the ball screw
&
driven translating tube system with trunnion mounted high- Benefits
efficiency helical or helical-bevel, oil filled gearboxes. The SCW
Series combines a ball screw or ACME screw driven translating
tube system with our existing clevis mounted worm gear actuators.
Both Duff-Norton
• Speeds Up To 379.5 in/min SuperCylinder series use a
• Capacities Up To 50,000 lbs. precision guided translating
• Strokes Up To 13 Feet tube system to broaden applica-
• Continuous Duty Ratings (SCN Series) tion capabilities. A ground and
• Low Power Requirements (SCN Series) chrome plated translating tube sliding
• Aluminum Bronze Worm Gears (SCW Series) in polymeric bearings produces excel-
• Helical & Helical Bevel Gears (SCN Series) lent resistance to buckling. This lets
• Ball Screw or Acme Screw SuperCylinders achieve stroke lengths
• Clevis Mounting or Trunnion Mounting much greater than are possible with conven-
tional double clevis mounted mechanical
actuators.
Enclosure of the screw by the tube system shields it from environmental contaminants and
retains lubricants, requiring less maintenance and allowing longer service. SuperCylinders
use hydraulic cylinder grade wiper seals to effectively exclude dirt from the screw area.
The modular concept employed by Duff-Norton for both SuperCylinder series allows an
unlimited number of configuration possibilities for tailoring of the SuperCylinder to an applica-
tion. The selection of available gear ratios is unmatched by any similar product. This excep-
tional choice of ratios allows precise tailoring of the actuator speed and load specifications.
Many additional motor and ratio options are available to meet specific capacity, speed, or life
requirements.

Common Applications
Steel Mill
• dust collection damper operation actuating 4 tons with a 19” stroke.
• lifting car trucks operation requiring 2 linked units lifting 44 tons.
Food Plant
• processing machine requiring 1 ton capacity unit with a 12” stroke.
Water Sewage
• scum skimmer machine actuating 660 lbs. with a 12” stroke.
• driving a dehydration cake hopper actuating 2 tons with a 27.5” stroke.
Incineration Plant
• waste pusher actuating 10 tons with a 19” stroke.
• driving stoker actuating 4 tons requiring 4 linked units.
Security
• raises security barriers.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

3
 Configurations
& The SCW Series SuperCylinders come in two
basic configurations depending on the performance
Components desired and components used — Parallel and Right Angle.
SCW Series Inline configurations can be specified for certain capacities.
Stainless steel can be specified for certain models.
Common SCW Series components are:
• Actuator and Tube Assembly — item 100
• Limit Switch and Adapter Plates — item numbers 101 & 102
• Flange — item 103 (parallel configuration only)
• Reducer — item 104 (parallel configuration only)
• Brake Motor — item 105
• Coupling — item 106 (right angle configuration only)
• C- face adapter — item 107 (right angle configuration only)

Parallel Configuration

Right Angle Configuration

4 For additional assistance, contact our Application Engineers at (800) 477-5002.

 Configurations
The SCN Series SuperCylinders are avail- &
able in three configurations — depending not only
on desired performance, but also space considera-
Components
tions. Available configurations are Offset, Right Angle, SCN Series
and Parallel.
Common SCN Series
components are:
• Tube Assembly — item 200
• Trunnion Housing — item 201
• Gear Box (oil filled) — item 202
• Brake Motor — item 203
• Limit Switch — item 204
• C-face Adapter — item 205 (parallel &
select right angle configurations only)
203

Offset Configuration

202

201

200

204 Right Angle Configuration

203

204

205

202
204

201
203

200

202

Parallel Configuration
201

200

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

5
 Engineering
Selection
Guide

1. Define the application’s operating parameters:

a. Total capacity — in most cases either the SCW or SCN Series will actuate the desired load.
b. Load per cylinder (if more than one is required)
c. Desired lifting speed — for applications requiring high speeds well in excess of 100 inches of
travel per minute a SCN Series model should be chosen.
d. Travel (distance to move the load)
e. Load type (tension, compression, guided, unguided)
f. Ambient temperatures (-20˚ to 120˚ F, -29˚ to 50˚ C)
g. Efficiency consideration — for applications requiring highly efficient — high duty cycles one
should consider using a SCN Series model.
h. Mounting considerations — There are two mounting configurations available — clevis and trun-
nion mounts. Should there be mounting restrictions; clevis mount applications should con-
sider the SCW Series, and trunnion mount applications should consider the SCN Series. If
one selects a SCN Series model, be sure to reference the closest matching mounting posi-
tion as depicted on page 9.
6 For additional assistance, contact our Application Engineers at (800) 477-5002.
 Engineering
Selection
Guide

i. Installation space restrictions — both the SCW and SCN series models are available with
Right Angle and Parallel configurations. SCN Series models are available with an Offset
configuration. For certain applications an In-line configuration may be specified.
j. Screw life — Both the SCW Series and the SCN Series models use ball screw and nut
technology. Screw life ratings are listed in the table for each model. Given the inverse
relationship between load rating and screw life; if the application requires a long screw
life decreasing the load should be considered. Alternatively, increasing the cylinder’s
static capacity is another option to effectively move the load and achieve longer screw
life.

2. Determine which SuperCylinder series best suits the application:

SCW Series — see pages 12 — 19 for details.
SCN Series — see pages 20 — 35 for details.

3. Verify the actuator selection:

Verify the SuperCylinder’s capacity, speed, travel requirements, mounting position,
and environmental factors.

WARNING
• Input revolutions should not exceed 1800 RPM’s.

• Never exceed the SuperCylinder’s maximum static capacity.

• Never exceed the HP listed in our specification tables. If the

application requires a higher HP than the model being consid-
ered, one should reduce the lifting speed, use a larger capacity
cylinder, choose another ratio, consider a more efficient model
containing ball screw, or perhaps choose the SCN Series.

• As duty cycles are intermittent, there is an inverse relationship

regarding an actuator’s duty cycle and the load being moved.
Please consult our application engineers for assistance in deter-
mining the most appropriate service factor.

• Models featuring ball screws are inherently self-lowering. Should

one of these models be the best fit for an application, a brake
motor with sufficient torque is required. Please contact out appli-
cation engineers for assistance.
www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 7
 Application Analysis Form for
® TM

SuperCylinder Actuators

Duff-Norton engineers will be pleased to make recommendations for your specific requirements.
To obtain their recommendations, please complete this form and mail or fax it to
Duff-Norton, PO Box 7010, Charlotte, NC 28241. Fax number 704-588-1994.

1. Quantity: _______

2. Required Capacity:
Dynamic (moving): Compression _________ lbs; Tension _________ lbs.
Static (holding): Compression _________ lbs; Tension _________ lbs.

3. Speed: _________ in./min (with_____Hz power)

4. Stroke: _________ in. (actual use)

5. Duty: __________ in./hour of total travel

6. Required life: _______________ in. of travel (Inches/hr. x hrs/day x days/yr x years of service)

7. Configuration (check one): Right Angle _____ Offset _____ Parallel _____

8. Power: _________VAC 1 / 3 Phase (circle one) 50 / 60 Hz (circle one)

9. Environment: Inside/ Outside covered/ Outside exposed/ Washdown (circle one)

Service temperature: _______ °F (low) to _______°F (high)
Exposure to: (Caustics, gases, dusts/abrasives, etc.) ____________________________________

10a. Mounting (SCW Series): Tube pointed at _______ o’clock.

10b. Mounting Position Code (SNC Series, see catalog pg. 9): _____
(This is required to allow for proper oil filling of the gearbox. Choose the option that most closely
matches actual installed position.)

11. Special requirements: repeatability, quick stop, etc. __________________________

12. Accessories: limit switch (standard), digital encoder, mounting blocks, etc.
_____________________________________________________________________

Name ________________________________ Title ________________________________

Company ____________________________ Phone ______________________________

Address ______________________________ Fax ________________________________

City, State, Zip ________________________ E-mail ______________________________

8 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SCN Series
Because the SCN Series use oil filled gear boxes, it is SuperCylinder
very important for Duff-Norton to know the cylinder’s appli-
cation mounting position. Providing this information to Duff- Mounting
Norton will ensure that the level plug, vent plug, and drain plugs are Positions
located on the gearbox in the position best suited for the application.
Please review the drawings below and provide the appropriate mounting
code (see our Application Analysis Form pg. 8)

Example: the customer wants an offset configuration with the cylinder pointing
straight up for a compression application. The proper mounting code would be H6.

Common Vent Plug

Symbols Level Plug Offset Mounting Position Codes
Drain Plug

H1 H3
H6

H4 H5

Right Angle Mounting Position Codes Parallel Mounting Position Codes

H1 H2
H3

H1

H3 H4
H4

H2

H6 H5
H5

H6

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 9

 SuperCylinder Model
Q u i c k R e f e re n c e SCW Worm Gear Series

Series Model Capacity Speed HP Max Stroke Screw Life Dia x Lead Screw Type Configuration Mounting
(lbs.) (in/min) (1725) (inches) (million in.) (inches)
SCW02 W0206A25 2360 72 2 51.6 N/A 1.00 x .25 Acme Right Angle Clevis
W0206B25 3280 72 1 58.4 1.0 1.00 x .25 Ball Right Angle Clevis
Catalog W0212A25 1300 36 3/4* 51.6 N/A 1.00 x .25 Acme Right Angle Clevis
Page W0212B25 4000 36 3/4 52.9 0.52 1.00 x .25 Ball Right Angle Clevis
12-13 W0224B25 3500 18 1/2 56.5 0.78 1.00 x .25 Ball Right Angle Clevis

SCW03 W0306B41 4300 119 2 54.7 0.74 1.17 x .41 Ball Right Angle Clevis
R0330B01 3600 57.5 1 55.7 0.21 1.00 x 1.00 Ball Parallel Clevis
Catalog R0345B01 3040 38.3 1/2 59.4 0.35 1.00 x 1.00 Ball Parallel Clevis
Page R0360B01 3480 28.8 1/2 56.7 0.23 1.00 x 1.00 Ball Parallel Clevis
12-13 R0330B41 6000 23.8 3/4 46.3 0.27 1.17 x .41 Ball Parallel Clevis
R0345B41 4700 15.8 1/3 52.3 0.57 1.17 x .41 Ball Parallel Clevis
R0330A25 5330 14.4 1 34.6 N/A 1.00 x .25 Acme Parallel Clevis
R0360B41 5600 11.9 1/3 47.9 0.34 1.17 x .41 Ball Parallel Clevis
R0360A25 5100 7.2 1/2* 35.4 N/A 1.00 x .25 Acme Parallel Clevis
R03120A25 5300 3.6 1/3* 34.7 N/A 1.00 x .25 Acme Parallel Clevis

SCW05 W0506B47 5850 136 3 79.0 5.7 1.50 x .474 Ball Right Angle Clevis
R0524B01 9900 71.9 3 61.9 0.44 1.50 x 1.00 Ball Parallel Clevis
Catalog R0530B01 8000 57.5 2 68.8 0.84 1.50 x 1.00 Ball Parallel Clevis
Page R0524B47 7400 34 1 71.6 2.8 1.50 x .474 Ball Parallel Clevis
14-15 R0530B47 9200 27.2 1 64.2 1.5 1.50 x .474 Ball Parallel Clevis
R0530A37 10000 21.5 3 57.3 N/A 1.50 x .375 Acme Parallel Clevis
R0545B47 10000 18.1 3/4 61.6 1.1 1.50 x .474 Ball Parallel Clevis
R0560B47 8900 13.6 1/2 65.3 1.6 1.50 x .474 Ball Parallel Clevis
R0560A37 10000 10.8 1-1/2 57.3 N/A 1.50 x .375 Acme Parallel Clevis
R05120B47 10000 6.8 1/3 61.6 1.10 1.50 x .474 Ball Parallel Clevis
R05120A37 9800 5.4 3/4* 57.9 N/A 1.50 x .375 Acme Parallel Clevis
R05240B47 10000 3.4 1/4 61.6 1.1 1.50 x .474 Ball Parallel Clevis

SCW10 W1008B50 11000 108 5 108.0 7.2 2.25 x .50 Ball Right Angle Clevis
W1012B50 9600 72 3 108.0 10.9 2.25 x .50 Ball Right Angle Clevis
Catalog R1032B50 17050 27 2 108.0 1.9 2.25 x .50 Ball Parallel Clevis
Page R1040A50 20000 21.6 5 69.0 N/A 2.00 x .50 Acme Parallel Clevis
16-17 R1040B50 20000 21.6 2 108.0 1.2 2.25 x .50 Ball Parallel Clevis
R1060B50 15500 14.4 1 108.0 2.6 2.25 x .50 Ball Parallel Clevis
R1080B50 20000 10.8 1 108.0 1.2 2.25 x .50 Ball Parallel Clevis
R1080A50 17500 10.8 2 73.8 N/A 2.00 x .50 Acme Parallel Clevis
R10160B50 18900 5.4 1/2 108.0 1.4 2.25 x .50 Ball Parallel Clevis
R10160A50 20000 5.4 1-1/2 69.0 N/A 2.00 x .50 Acme Parallel Clevis
R10320A50 20000 2.7 3/4* 69.0 N/A 2.00 x .50 Acme Parallel Clevis

SCW20 R2032B50 25150 27 3 132.0 0.76 2.50 x .50 Ball Parallel Clevis
R2040B50 30700 21.6 3 132.0 0.42 2.50 x .50 Ball Parallel Clevis
Catalog R2060B50 29700 14.4 2 132.0 0.46 2.50 x .50 Ball Parallel Clevis
Page R2080B50 29300 10.8 1.5 132.0 0.48 2.50 x .50 Ball Parallel Clevis
18 R2080A50 32000 10.8 5* 99.0 N/A 2.50 x .50 Acme Parallel Clevis
R20160B50 26800 5.4 3/4 132.0 0.63 2.50 x .50 Ball Parallel Clevis
R20160A50 35000 5.4 3* 94.6 N/A 2.50 x .50 Acme Parallel Clevis
R20320B50 30900 2.7 1/2 132.0 0.41 2.50 x .50 Ball Parallel Clevis
R20320A50 32000 2.7 1.5* 99.0 N/A 2.50 x .50 Acme Parallel Clevis

SCW25 R2544B66 40700 26.7 5 144.4 1.2 3 x .660 Ball Parallel Clevis
R2555B66 50000 21.4 5 130.3 0.70 3 x .660 Ball Parallel Clevis
Catalog R2580B66 45000 14.2 3 137.4 0.95 3 x .660 Ball Parallel Clevis
Page R25110B66 40000 10.7 2 145.7 1.3 3 x .660 Ball Parallel Clevis
19 R25110A66 46000 10.7 7-1/2* 143.4 N/A 3 x .666 Acme Parallel Clevis
R25220B66 50000 5.3 1.5 130.3 0.70 3 x .660 Ball Parallel Clevis
R25220A66 44500 5.3 5* 145.8 N/A 3 x .666 Acme Parallel Clevis
R25440B66 48000 2.7 3/4 133.0 0.78 3 x .660 Ball Parallel Clevis
R25440A66 40400 2.7 2* 153.0 N/A 3 x .666 Acme Parallel Clevis

10 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SuperCylinder
SCN Helical and Helical Model Quick
Bevel Gear Series R e f e re n c e

Series Capacity Speed Std. Max Stroke Screw Life Dia x Lead Screw Type Configuration Mounting
(lbs.) (in/min) HP (inches) (million in.) (inches)
SCN03 2134 - 6000 8.6 - 165.5 .16 - 1.0 61.0 .30 - 6.1 1.17x .413 Ball Offset Trunnion
Catalog 2879 - 6000 5.5 - 155.7 .16 - 1.5 61.0 .30 - 2.5 1.17x .413 Ball Parallel Trunnion
Page 20-23 2637 - 4991 12.8 - 182.4 .16 - 1.5 61.0 .70 - 3.2 1.17x .413 Ball Right Angle Trunnion

SCN06 4481 - 6633 185.2 - 354.9 3.0 - 5.0 80.0 2.4 - 4.8 1.50 x 1.00 Ball Offset Trunnion
Catalog 5645 - 12000 5.1 - 168.2 .25 - 3.0 77.0 .60 - 5.6 1.50 x .474 Ball Offset Trunnion
Pages 24-27 2773 - 4147 204.6 - 379.5 2.0 - 3.0 80.0 6.1 - 20.3 1.50 x 1.00 Ball Parallel Trunnion
5900 - 12000 7.2 - 179.9 .33 - 3.0 77.0 .60 - 4.9 1.50 x .474 Ball Parallel Trunnion
3281 - 5131 179.5 - 320.8 2.0 - 3.0 80.0 7.2 - 12.2 1.50 x 1.00 Ball Right Angle Trunnion
6980 - 12000 12.8 - 152.0 .33 - 3.0 77.0 .70 - 3.0 1.50 x .474 Ball Right Angle Trunnion

SCN12 9305 - 24000 3.1 - 188.5 .25 - 5.0 110.0 .70 - 12.0 2.25 x .050 Ball Offset Trunnion
Catalog 9697 - 24000 5.5 - 180.9 .33 - 5.0 110.0 .80 - 10.6 2.25 x .050 Ball Parallel Trunnion
Pages 28-31 13469 - 23117 13.3 - 176.7 .75 - 7.5 110.0 .80 - 2.9 2.25 x .050 Ball Right Angle Trunnion

SCN25 14005 - 50000 2.3 - 250.4 .33 - 10.0 161.0 .70 - 31.7 3.00 x .660 Ball Offset Trunnion
Catalog 13505 - 50000 8.4 - 259.7 1.0 - 10.0 161.0 .70 - 35.3 3.00 x .660 Ball Parallel Trunnion
Pages 32-35 26510 - 50000 3.8 - 132.3 .50 - 10.0 161.0 .70 - 4.7 3.00 x .660 Ball Right Angle Trunnion

The above table illustrates the wide capacity and speed ranges of the Duff-Norton SCN
Series. Contact our Application Engineers at (800) 477-5002 for assistance in selecting the
specific model that best suits your application.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 11

 P ro d u c t SCW02 & SCW03
Specifications Series

Specifications
Maximum Capacity 2-3 Tons
Maximum Speed 119 in/min
Temperature Range -20º to 120º F (-29º to 50º C)
Construction Ductile iron actuator housing, and thin dense
nodular chrome plated translating tubes. The
translating tubes feature hydraulic cylinder grade
wiper seals and are guided at both ends by poly-
meric bearings.
Power Brake motor
Mounting Double clevis
Load Screw ACME or ball screw
Limit Switches Independently adjustable

Series Model Capacity Speed HP Max Stroke Screw Life Dia x Lead Screw Type Configuration
(lbs.) (in/min) (1725) (inches) (million in.) (inches)
SCW02 W0206A25 2360 72 2 51.6 N/A 1.00 x .25 Acme Right Angle
W0206B25 3280 72 1 58.4 1.0 1.00 x .25 Ball Right Angle
W0212A25 1300 36 3/4* 51.6 N/A 1.00 x .25 Acme Right Angle
W0212B25 4000 36 3/4 52.9 0.52 1.00 x .25 Ball Right Angle
W0224B25 3500 18 1/2 56.5 0.78 1.00 x .25 Ball Right Angle

SCW03 W0306B41 4300 119 2 54.7 0.74 1.17 x .41 Ball Right Angle
R0330B01 3600 57.5 1 55.7 0.21 1.00 x 1.00 Ball Parallel
R0345B01 3040 38.3 1/2 59.4 0.35 1.00 x 1.00 Ball Parallel
R0360B01 3480 28.8 1/2 56.7 0.23 1.00 x 1.00 Ball Parallel
R0330B41 6000 23.8 3/4 46.3 0.27 1.17 x .41 Ball Parallel
R0345B41 4700 15.8 1/3 52.3 0.57 1.17 x .41 Ball Parallel
R0330A25 5330 14.4 1 34.6 N/A 1.00 x .25 Acme Parallel
R0360B41 5600 11.9 1/3 47.9 0.34 1.17 x .41 Ball Parallel
R0360A25 5100 7.2 1/2* 35.4 N/A 1.00 x .25 Acme Parallel
R03120A25 5300 3.6 1/3* 34.7 N/A 1.00 x .25 Acme Parallel
Models with asterisk by motor HP (1725) are inherently load holding. Motor brake may be omitted if slight drift is acceptable.

12 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SCW02 &
Product Dimensions SCW03 Series

C Standard orientations shown.

2.50 Reducer, motor, and limit switch
can be rotated 90º increments.

Ø 2.50 8.97
Model A C
1.00 ± .06 R0330B01 15.25 + (1.25xStroke) 16.73
R0345B01 15.25 + (1.25xStroke) 16.23
R0360B01 15.25 + (1.25xStroke) 16.23
R0330B41 15.25 + (1.25xStroke) 16.23
R0345B41 15.25 + (1.25xStroke) 14.73
1.00 5.34 R0330A25 14.25 + (1.25xStroke) 16.73
Ø 3.38 R0360B41 15.25 + (1.25xStroke) 14.73
R0360A25 14.25 + (1.25xStroke) 16.23
1/2" NPT R03120A25 14.25 + (1.25xStroke) 14.73

A
6.28
1.00 1.13
1.33
.75
1.70
1.63

.79
Ø .625 Ø 7.16
Both Ends

1.00
Model A C
.75 W0206A25 14.25 + (1.25xStroke) 22.1
1.63 W0206B25 15.25 + (1.25xStroke) 19.7
Ø 2.50 W0212B25 15.25 + (1.25xStroke) 19.2
W0224B25 15.25 + (1.25xStroke) 19.2
W0306B41 15.25 + (1.25xStroke) 22.1

1.0
Ø 3.38

C
1/2"NPT 5.36
A

6.28

Ø 7.16
3.38

1.70 1.13
.79 Ø .625
Both Ends
www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994
13
 P ro d u c t SCW05 Series
Specifications

Specifications
Maximum Capacity 5 Tons
Maximum Speed 136 in/min
Temperature Range -20º to 120º F (-29º to 50º C)
Construction Ductile iron actuator housing, and thin dense
nodular chrome plated translating tubes. The
translating tubes feature hydraulic cylinder grade
wiper seals, and are guided at both ends by poly-
meric bearings.
Power Brake motor
Mounting Double clevis
Load Screw ACME or ball screw
Limit Switches Independently adjustable

Series Model Capacity Speed HP Max Stroke Screw Life Dia x Lead Screw Type Configuration
(lbs.) (in/min) (1725) (inches) (million in.) (inches)
SCW05 W0506B47 5850 136 3 79.0 5.7 1.50 x .474 Ball Right Angle
R0524B01 9900 71.9 3 61.9 0.44 1.50 x 1.00 Ball Parallel
R0530B01 8000 57.5 2 68.8 0.84 1.50 x 1.00 Ball Parallel
R0524B47 7400 34 1 71.6 2.8 1.50 x .474 Ball Parallel
R0530B47 9200 27.2 1 64.2 1.5 1.50 x .474 Ball Parallel
R0530A37 10000 21.5 3 57.3 N/A 1.50 x .375 Acme Parallel
R0545B47 10000 18.1 3/4 61.6 1.1 1.50 x .474 Ball Parallel
R0560B47 8900 13.6 1/2 65.3 1.6 1.50 x .474 Ball Parallel
R0560A37 10000 10.8 1-1/2 57.3 N/A 1.50 x .375 Acme Parallel
R05120B47 10000 6.8 1/3 61.6 1.10 1.50 x .474 Ball Parallel
R05120A37 9800 5.4 3/4* 57.9 N/A 1.50 x .375 Acme Parallel
R05240B47 10000 3.4 1/4 61.6 1.1 1.50 x .474 Ball Parallel
Models with asterisk by motor HP are inherently load holding. Motor brake may be omitted if slight drift is acceptable.
slight drift is not detrimental.

14 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SCW05 Series
Product Dimensions

Standard orientations shown.

Reducer, motor, and limit switch
can be rotated 90º increments.
C
D Model A B C D E F
R0524B01 19.0 + (1.25xStroke) 11.87 19.92 3.44 9.22 2.00
R0530B01 19.0 + (1.25xStroke) 11.08 19.94 3.44 7.16 1.75
R0524B47 19.0 + (1.25xStroke) 11.08 17.56 3.44 7.16 1.75
R0530B47 19.0 + (1.25xStroke) 11.08 17.56 3.44 7.16 1.75
R0530A37 18.0 + (1.25xStroke) 11.08 19.92 3.44 7.16 1.75
B R0545B47 19.0 + (1.25xStroke) 11.08 17.06 3.44 7.16 1.75
R0560B47 19.0 + (1.25xStroke) 11.08 17.06 3.44 7.16 1.75
R0560A37 18.0 + (1.25xStroke) 11.08 18.94 3.44 7.16 1.75
1.00 R05120B47 19.0 + (1.25xStroke) 11.08 15.56 3.44 7.16 1.75
R05120A37 18.0 + (1.25xStroke) 11.08 17.06 3.44 7.16 1.75
R05240B47 19.0 + (1.25xStroke) 11.08 15.56 3.44 7.16 1.75

Ø 4.13 6.13 1.00 ± .06

Ø 3.00

1/2"NPT
A
4.25
6.2 3.36
1.11 1.37
.88
2.19
2.00
.79
F
Ø .75 E
Both Ends

2.0
Ø .75
Both .88
1.00 Model W0506B47
Ends
Ø 3.00

1.11

Ø 4.13
1/2"NPT
19.0 + (1.25 x Stroke)

6.28

1.37 Ø 9.22
4.25

1.00 ±.06
2.19 6.13
.79 23.6

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

15
 P ro d u c t SCW10 Series
Specifications

Specifications
Maximum Capacity 10 Tons
Maximum Speed 108 in/min
Temperature Range -20º to 120º F (-29º to 50º C)
Construction Ductile iron actuator housing, and thin dense
nodular chrome plated translating tubes. The
translating tubes feature hydraulic cylinder grade
wiper seals, and are guided at both ends by poly-
meric bearings.
Power Brake motor
Mounting Double clevis
Load Screw ACME or ball screw
Limit Switches Independently adjustable

Series Model Capacity Speed HP Max Stroke Screw Life Dia x Lead Screw Type Configuration
(lbs.) (in/min) (1725) (inches) (million in.) (inches)
SCW10 W1008B50 11000 108 5 108.0 7.2 2.25 x .50 Ball Right Angle
W1012B50 9600 72 3 108.0 10.9 2.25 x .50 Ball Right Angle
R1032B50 17050 27 2 108.0 1.9 2.25 x .50 Ball Parallel
R1040A50 20000 21.6 5 69.0 N/A 2.00 x .50 Acme Parallel
R1040B50 20000 21.6 2 108.0 1.2 2.25 x .50 Ball Parallel
R1060B50 15500 14.4 1 108.0 2.6 2.25 x .50 Ball Parallel
R1080B50 20000 10.8 1 108.0 1.2 2.25 x .50 Ball Parallel
R1080A50 17500 10.8 2 73.8 N/A 2.00 x .50 Acme Parallel
R10160B50 18900 5.4 1/2 108.0 1.4 2.25 x .50 Ball Parallel
R10160A50 20000 5.4 1-1/2 69.0 N/A 2.00 x .50 Acme Parallel
R10320A50 20000 2.7 3/4* 69.0 N/A 2.00 x .50 Acme Parallel
Models with asterisk by motor HP are inherently load holding. Motor brake may be omitted if slight drift is acceptable.
slight drift is not detrimental.

16 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SCW10 Series
Product Dimensions

Model A B C D E F
R1032B50 22.125 + (1.25xStroke) 11.83 19.94 3.44 7.16 2.00
R1040A50 19.625 + (1.25xStroke) 13.64 21.69 4.50 9.22 2.63
R1040B50 22.125 + (1.25xStroke) 11.95 19.94 3.44 7.16 1.75
C D R1060B50 22.125 + (1.25xStroke) 11.95 17.56 3.44 7.16 1.75
R1080B50 22.125 + (1.25xStroke) 11.95 17.56 3.44 7.16 1.75
R1080A50 19.625 + (1.25xStroke) 11.83 19.94 3.44 7.16 2.00
R10160B50 22.125 + (1.25xStroke) 11.95 17.06 3.44 7.16 1.75
E R10160A50 19.625 + (1.25xStroke) 12.61 15.13 4.50 7.16 2.63
B R10320A50 19.625 + (1.25xStroke) 11.95 17.06 3.44 7.16 1.75

1.50

1.50 ±.06
4.00 7.04 Standard orientations shown.
Ø 5.25 Reducer, motor, and limit switch
can be rotated 90º increments.
1/2"NPT

4.77
1.61 6.21 1.77
1.14
5.88
2.60 F
3.00
2.88

Ø 1.00 A
Both
Ends

3.00
Ø 1.00
1.14 1.50
Both
Ends
Ø 4.00

1.60
Ø 5.25

25.5 (W1008B50)
25.0 (W1012B50)
22.125 + 7.01
(1.25 x Stroke) Ø 9.22

6.28
1/2"NPT

4.77
1.77

2.60 1.50 ±.06

R1.00

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

17
 P ro d u c t SCW20 Series
Specifications

Specifications
Maximum Capacity 20 Tons
Maximum Speed 27 in/min
Temperature Range -20º to 120º F (-29º to 50º C)
Construction Ductile iron actuator housing, and thin dense
nodular chrome plated translating tubes. The
translating tubes feature hydraulic cylinder grade
wiper seals, and are guided at both ends by poly-
meric bearings.
Power Brake motor
Mounting Double clevis
Load Screw ACME or ball screw
Limit Switches Independently adjustable

Series Model Capacity Speed HP Max Stroke Screw Life Dia x Lead Screw Type Configuration
(lbs.) (in/min) (1725) (inches) (million in.) (inches)
SCW25 R2032B50 25150 27 3 132.0 0.76 2.50 x .50 Ball Parallel
R2040B50 30700 21.6 3 132.0 0.42 2.50 x .50 Ball Parallel
R2060B50 29700 14.4 2 132.0 0.46 2.50 x .50 Ball Parallel
R2080B50 29300 10.8 1.5 132.0 0.48 2.50 x .50 Ball Parallel
R2080A50 32000 10.8 5* 99.0 N/A 2.50 x .50 Acme Parallel
R20160B50 26800 5.4 3/4 132.0 0.63 2.50 x .50 Ball Parallel
R20160A50 35000 5.4 3* 94.6 N/A 2.50 x .50 Acme Parallel
R20320B50 30900 2.7 1/2 132.0 0.41 2.50 x .50 Ball Parallel
R20320A50 32000 2.7 1.5* 99.0 N/A 2.50 x .50 Acme Parallel
Models with asterisk by motor HP (1725) are inherently load holding. Motor brake may be omitted if slight drift is acceptable.

C D
Standard orientations shown.
Reducer, motor, and limit switch
can be rotated 90º increments.

Model A B C D E F
B R2032B50 26.25 + (1.25xStroke) 13.65 21.24 4.50 9.22 2.63
R2040B50 26.25 + (1.25xStroke) 13.65 21.24 4.50 9.22 2.63
R2060B50 26.25 + (1.25xStroke) 12.86 19.94 4.50 9.22 2.63
R2080B50 26.25 + (1.25xStroke) 11.83 18.94 3.44 7.16 2.00
2.00
R2080A50 24.25 + (1.25xStroke) 14.49 22.12 5.46 9.22 3.50
R20160B50 26.25 + (1.25xStroke) 11.96 17.06 3.44 7.16 1.75
R20160A50 24.25 + (1.25xStroke) 14.49 21.67 5.46 9.22 3.50
Ø 6.00 7.28 2.00 ±.09 R20320B50 26.25 + (1.25xStroke) 11.96 17.06 3.44 7.16 1.75
R20320A50 24.25 + (1.25xStroke) 12.62 20.26 5.46 7.16 3.50
1/2" NPT

6.22 6.75
2.25
2.07
1.63
2.59 F

Ø 1.25
Both Ends R1.25
Ø E
A
18 For additional assistance, contact our Application Engineers at (800) 477-5002.
SCW25 Series P ro d u c t
Specifications

Specifications
Maximum Capacity 25 Tons
Maximum Speed 26.7 in/min
Temperature Range -20º to 120º F (-29º to 50º C)
Construction Ductile iron actuator housing, and thin dense
nodular chrome plated translating tubes. The
translating tubes feature hydraulic cylinder grade
wiper seals, and are guided at both ends by poly-
meric bearings.
Power Brake motor
Mounting Double clevis
Load Screw ACME or ball screw
Limit Switches Independently adjustable

Series Model Capacity Speed HP Max Stroke Screw Life Dia x Lead Screw Type Configuration
(lbs.) (in/min) (1725) (inches) (million in.) (inches)
SCW25 R2544B66 40700 26.7 5 144.4 1.2 3 x .660 Ball Parallel
R2555B66 50000 21.4 5 130.3 0.70 3 x .660 Ball Parallel
R2580B66 45000 14.2 3 137.4 0.95 3 x .660 Ball Parallel
R25110B66 40000 10.7 2 145.7 1.3 3 x .660 Ball Parallel
R25110A66 46000 10.7 7-1/2* 143.4 N/A 3 x .666 Acme Parallel
R25220B66 50000 5.3 1.5 130.3 0.70 3 x .660 Ball Parallel
R25220A66 44500 5.3 5* 145.8 N/A 3 x .666 Acme Parallel
R25440B66 48000 2.7 3/4 133.0 0.78 3 x .660 Ball Parallel
R25440A66 40400 2.7 2* 153.0 N/A 3 x .666 Acme Parallel
Models with asterisk by motor HP (1725) are inherently load holding. Motor brake may be omitted if slight drift is acceptable.

D Standard orientations shown.

C Reducer, motor, and limit switch
can be rotated 90º increments.

Model A B C D E F
B R2543B66 32.12 + (1.25xStroke) 14.65 21.69 4.50 9.22 2.63
R2555B66 32.12 + (1.25xStroke) 14.65 21.69 5.46 9.22 3.50
R2580B66 32.12 + (1.25xStroke) 14.65 21.24 4.50 9.22 2.63
R25110B66 32.12 + (1.25xStroke) 14.65 21.24 4.50 9.22 2.63
R25110A66 29.12 + (1.25xStroke) 15.49 27.60 6.28 9.22 4.25
2.50 R25220B66 32.12 + (1.25xStroke) 13.62 20.26 4.50 7.16 2.63
R25220A66 29.12 + (1.25xStroke) 15.49 22.12 5.46 9.22 3.50
R25440B66 32.12 + (1.25xStroke) 13.62 18.88 4.50 7.16 2.63
Ø 5.88 7.94 2.50 ±.09 R25440A66 29.12 + (1.25xStroke) 14.46 21.69 5.46 7.16 3.50
Ø 7.25
1/2" NPT

2.68
6.28 8.22
2.63
1.88 8.63
F
4.50
5.13
Ø 1.50
Both Ends
Ø E
A
www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994
19
 P ro d u c t SCN03 Series
Specifications

Specifications

Maximum Capacity 3 Tons

Maximum Speed 182.4 in/min
Temperature Range -15º to 140º F (-29º to 60º C)
Construction Steel trunnion housing, and thin dense nodular
chrome plated translating tubes. The translating
tubes feature hydraulic cylinder grade wiper seals,
and are guided at both ends by polymeric bearings.
Power Standard brake motors use Class F insulation with
Class B rise (1.15 S.F.) All brake motors are
totally enclosed, fan cooled. IP66 or wash-down
motors are available. Standard brake motors are
UL, CSA, or CE marked, depending on voltage.
Heidenhain Incremental Motor Encoder option
available.
Mounting Trunnion
Load Screw 1.17 x .41 Ball Screw
Limit Switches Independently adjustable. Traveling nut style for
best repeatability and setting ease. CAM type
limits switches are used on Parallel configurations.

20 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SCN03 Series
Product Specifications
and Dimensions

Series Model Capacity Speed Std. Max Stroke Screw Life

(lbs.) (in/min) HP (inches) (million in.)
SCN03 NZ03-0424 2134 165.6 1 61.0 6.1
NZ03-0534 2687 131.5 1 61.0 3.0
NZ03-0635 3196 110.6 1 61.0 1.8
NZ03-0726 3654 96.7 1 59.0 1.2
NZ03-0864 3261 81.3 0.75 61.0 1.7
NZ03-0949 3582 74.0 0.75 59.0 1.3
NZ03-1166 2934 60.2 0.5 61.0 2.3
NZ03-1384 3482 50.7 0.5 60.0 1.4
NZ03-1492 3754 47.1 0.5 58.0 1.1
NZ03-1653 4159 42.5 0.5 55.0 0.8
NZ03-1879 4728 37.4 0.5 52.0 0.6
NZ03-2235 3712 31.4 0.33 58.0 1.2
NZ03-2455 4077 28.6 0.33 56.0 0.9
NZ03-2913 4838 24.1 0.33 51.0 0.5
NZ03-3181 5283 22.1 0.33 49.0 0.4
NZ03-3480 5779 20.2 0.33 47.0 0.3
NZ03-3773 6000 18.6 0.33 45.0 0.3
NZ03-4185 5265 16.8 0.25 49.0 0.4
NZ03-4965 6000 14.1 0.25 45.0 0.3
NZ03-5933 6000 11.8 0.25 41.0 0.3
NZ03-8171 6000 8.6 0.16 44.0 0.3

AB Largest Motor (1HP) Shown

1.00
.75 P
3.248

Ø .625
2.47
(1.25 x Stroke) + 10.94
C

Ø 1.00
1.00
Ø 2.50 TB N

Ø 3.375 4.50 Ø FP

1.125
4.33
Motor HP C FP AB TB N P
.16 - .25 17.00 5.17 4.84 7.94 5.20 3.43
.33 - .50 17.95 5.71 5.24 8.25 5.20 3.43
.75 - 1.0 19.05 6.50 5.63 8.21 6.02 4.25

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 21
 P ro d u c t
Specifications SCN03 Series
and Dimensions
Series Model Capacity Speed Std. Max Stroke Screw Life
(lbs.) (in/min) HP (inches) (million in.)
SCN03 NU03-0451 3404 155.7 1.5 61.0 1.5
NU03-0572 2879 122.7 1 61.0 2.5
NU03-0643 3236 109.2 1 61.0 1.7
NU03-0748 3764 93.9 1 58.0 1.1
NU03-0837 3159 83.9 0.75 61.0 1.9
NU03-0903 3408 77.8 0.75 61.0 1.5
NU03-1015 3831 69.2 0.75 57.0 1.1
NU03-1181 2972 59.4 0.5 61.0 2.3
NU03-1323 3329 53.1 0.5 61.0 1.6
NU03-1653 4159 42.5 0.5 55.0 0.8
NU03-1851 3074 37.9 0.33 61.0 2.0
NU03-2190 3637 32.1 0.33 59.0 1.2
NU03-2396 3979 29.3 0.33 56.0 0.9
NU03-2497 4147 28.1 0.33 55.0 0.8
NU03-2683 3375 26.2 0.25 61.0 1.5
NU03-2965 3730 23.7 0.25 58.0 1.1
NU03-3123 3929 22.5 0.25 57.0 1.0
NU03-3654 4597 19.2 0.25 52.0 0.6
NU03-3718 4678 18.9 0.25 52.0 0.6
NU03-4511 3632 15.6 0.16 59.0 1.2
NU03-5396 4345 13.0 0.16 54.0 0.7
NU03-6383 5139 11.0 0.16 50 0.4
NU03-6967 5610 10.1 0.16 47 0.3
NU03-8242 6000 8.5 0.16 44 0.3
NU03-10098 6000 7.0 0.16 39 0.3
NU03-10407 6000 6.7 0.16 39 0.3
NU03-12751 6000 5.5 0.16 35 0.3

7.87

Ø 7.16

5.31

1.00
5.79
.75

Ø 3.38

Ø .63
1.00
3.46 (1.25 x Stroke) + 10.94 13.13

4.50
C
Ø 2.50

7.48

Motor HP C 1.00
1/3 11.92
1/2 - 3/4 13.42
1 13.92
1.5 15.36
Ø 1.00

Important: See page 9 for mounting position code.

22 For additional assistance, contact our Application Engineers at (800) 477-5002.
 SCN03 Series
Product Specifications
and Dimensions

Series Model Capacity Speed Std. Max Stroke Screw Life

(lbs.) (in/min) HP (inches) (million in.)
SCN03 NL03-0385 2906 182.4 1.5 61.0 2.4
NL03-0524 2637 134.0 1 61.0 3.2
NL03-0579 2914 121.3 1 61.0 2.4
NL03-0644 3241 109.0 1 61.0 1.7
NL03-0787 2970 89.2 0.75 61.0 2.3
NL03-0899 3393 78.1 0.75 61.0 1.5
NL03-0968 3654 72.5 0.75 59.0 1.2
NL03-1106 2783 63.5 0.5 61.0 2.7
NL03-1355 3409 51.8 0.5 61.0 1.5
NL03-1756 2916 40.0 0.33 61.0 2.4
NL03-2037 3383 34.5 0.33 61.0 1.5
NL03-2328 3866 30.2 0.33 57.0 1.0
NL03-2639 3320 26.6 0.25 61.0 1.6
NL03-3015 3793 23.3 0.25 58.0 1.1
NL03-3473 4369 20.2 0.25 54.0 0.7
NL03-3967 4991 17.7 0.25 50.0 0.5
NL03-4783 3851 14.7 0.16 57.0 1.0
NL03-5465 4400 12.8 0.16 54.0 0.7

Motor HP C FP AB TB N P
1.00 .16 - .25 14.96 5.17 4.84 5.94 5.2 3.43
.33 - .50 15.91 5.71 5.24 6.26 5.2 3.43
4.50 Ø 3.38 .75 - 1.0 17.01 6.5 5.63 6.22 6.02 4.25
1.5 - 2.0 19.02 7.2 5.83 6.42 6.02 4.25

1.00 Ø 2.50
Ø 1.00
Ø FP

1 HP Motor Shown

N AB
5.35
1.20
(1.25 x Stroke) + 10.94"

1.00
TB
.75
2.76

Ø .63
2.30
7.42 4.41

13.98

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 23
 P ro d u c t SCN06 Series
Specifications

Specifications
Maximum Capacity 6 Tons
Maximum Speed 379.5 in/min
Temperature Range -15º to 140º F (-29º to 60º C)
Construction Steel trunnion housing, and thin dense nodular
chrome plated translating tubes. The translating
tubes feature hydraulic cylinder grade wiper seals,
and are guided at both ends by polymeric bearings.
Power Standard brake motors use Class F insulation with
Class B rise (1.15 S.F.) All brake motors are
totally enclosed, fan cooled. IP66 or wash-down
motors are available. Standard brake motors are
UL, CSA, or CE marked, depending on voltage.
Heidenhain Incremental Motor Encoder option
available.
Mounting Trunnion
Load Screw 1.50 x .474 and 1.50 x 1.00 Ball Screw (models
with asterik contain 1.50 x 1.00 Ball Screws.)
Limit Switches Independently adjustable. Traveling nut style for
best repeatability and setting ease. CAM type
limits switches are used on Parallel configurations.

24 For additional assistance, contact our Application Engineers at (800) 477-5002.

Product Specifications SCN06 Series
and Dimensions
Series Model Capacity Speed Std. Max Stroke Screw Life
(lbs.) (in/min) HP (inches) (million in.)
SCN06 NZH6-0479* 4942 354.9 5 80.0 3.6
NZH6-0547* 5643 310.8 5 80.0 2.4
NZH6-0643* 6633 264.4 5 75.0 1.5
NZH6-0724* 4481 234.8 3 80.0 4.8
NZH6-0824* 5100 206.3 3 80.0 3.3
NZH6-0918* 5682 185.2 3 80.0 2.4
NZ06-0479 6308 168.2 3 77.0 4.0
NZ06-0547 7204 147.3 3 72.0 2.7
NZ06-0643 5645 125.3 2 80.0 5.6
NZ06-0724 6357 111.3 2 77.0 4.0
NZ06-0824 7235 97.8 2 72.0 2.7
NZ06-0918 8060 87.8 2 68.0 1.9
NZ06-1034 6809 77.9 1.5 74.0 3.2
NZ06-1176 7744 68.5 1.5 69.0 2.2
NZ06-1411 6194 57.1 1 78.0 4.3
NZ06-1721 7555 46.8 1 70.0 2.4
NZ06-2057 9030 39.2 1 64.0 1.4
NZ06-2522 8304 32.0 0.75 67.0 1.8
NZ06-2833 9328 28.4 0.75 63.0 1.3
NZ06-3208 10562 25.1 0.75 59.0 0.9
NZ06-4107 9015 19.6 0.5 64.0 1.4
NZ06-4925 10810 16.4 0.5 59 0.8
NZ06-5889 12926 13.7 0.5 54 0.5
NZ06-7217 10455 11.2 0.33 60 0.9
NZ06-7899 11443 10.2 0.33 57 0.7
NZ06-8117 11759 9.9 0.33 56 0.6
NZ06-8894 12000 9.1 0.33 54 0.6
NZ06-9248 12000 8.7 0.33 53 0.6
NZ06-10114 12000 8.0 0.33 50 0.6
NZ06-10608 12000 7.6 0.33 49 0.6
NZ06-10950 12000 7.4 0.33 48 0.6
NZ06-11816 12000 6.8 0.25 54 0.6
NZ06-13660 12000 5.9 0.25 50 0.6
NZ06-15812 12000 5.1 0.25 46 0.6

Largest motor (3HP) Shown.

3 HP Motor shown
C

AB

P Ø FP
1.13
.88
4.80

Ø .75
15.7

(1.25 x Stroke) + 13.4"

1.25
Ø 1.25
TB N
Ø 3.00

ÿØ 4.13 6.00

1.00
6.22

Motor HP C FP AB TB N P
.16 - .25 18.33 5.17 4.84 9.31 5.20 3.43
.33 - .50 20.00 5.71 5.24 10.14 5.20 3.43
.75 - 1.0 21.21 6.50 5.63 10.42 6.02 4.25
1.5 - 2.0 23.25 7.20 5.83 10.61 6.02 4.25
3 25.06 7.91 6.26 10.85 6.02 4.25
Important: See page 9 for mounting position code.
www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 25
 P ro d u c t
Specifications
SCN06 Series
and Dimensions

Series Model Capacity Speed Std. Max Stroke Screw Life

(lbs.) (in/min) HP (inches) (million in.)
SCN06 NUH6-0448* 2773 379.5 3 80.0 20.3
NUH6-0568* 3516 299.3 3 80.0 9.9
NUH6-0670* 4147 253.7 3 80.0 6.1
NUH6-0831* 3429 204.6 2 80.0 10.7
NU06-0448 5900 179.9 3 80.0 4.9
NU06-0568 7480 141.9 3 71.0 2.4
NU06-0670 8824 120.3 3 65.0 1.5
NU06-0831 7296 97.0 2 72.0 2.6
NU06-0980 8604 82.2 2 66.0 1.6
NU06-1138 9992 70.8 2 61.0 1.0
NU06-1411 9291 57.1 1.5 63.0 1.3
NU06-1667 7318 48.3 1 71.0 2.6
NU06-2018 8859 39.9 1 65.0 1.5
NU06-2138 9386 37.7 1 63.0 1.2
NU06-2245 9855 35.9 1 62.0 1.1
NU06-2371 7806 34.0 0.75 69.0 2.1
NU06-2588 8521 31.1 0.75 66.0 1.6
NU06-2870 9449 28.1 0.75 63.0 1.2
NU06-3193 10513 25.2 0.75 60.0 0.9
NU06-3777 8290 21.3 0.5 67.0 1.8
NU06-4202 9223 19.2 0.5 64.0 1.3
NU06-4485 9844 18.0 0.5 62 1.1
NU06-5297 11627 15.2 0.5 57 0.6
NU06-6412 9289 12.6 0.33 63 1.3
NU06-6589 9545 12.2 0.33 63 1.2
NU06-7976 11555 10.1 0.33 57 0.7
NU06-8874 12000 9.1 0.33 54 0.6
NU06-10088 12000 8.0 0.33 50 0.6
NU06-11223 12000 7.2 0.33 48 0.6

7.87

Ø 7.16
5.31

7.01
1.13
.88

Ø 4.13

Ø .75

4.13 1.25 (1.25 x Stroke) + 13.4" 15.0

6.00

C
3.00

8.90
Motor HP C
1/3 11.16 1.00
1/2 - 3/4 12.66
1 13.16
1 - 1/2 14.16
2 15.16 Ø 1.25
3 16.04

Important: See page 9 for mounting position code.

26 For additional assistance, contact our Application Engineers at (800) 477-5002.
Product Specifications SCN06 Series
and Dimensions
Series Model Capacity Speed Std. Max Stroke Screw Life
(lbs.) (in/min) HP (inches) (million in.)
SCN06 NLH6-0530* 3281 320.8 3 80.0 12.2
NLH6-0597* 3695 284.8 3 80.0 8.6
NLH6-0649* 4017 261.9 3 80.0 6.7
NLH6-0732* 4531 232.2 3 80.0 4.6
NLH6-0829* 5131 205.1 3 80.0 3.2
NLH6-0947* 3908 179.5 2 80.0 7.2
NL06-0530 6980 152.0 3 73.0 3.0
NL06-0597 7862 135.0 3 69.0 2.1
NL06-0649 8547 124.2 3 66.0 1.6
NL06-0732 9640 110.1 3 62.0 1.1
NL06-0829 7279 97.2 2 72.0 2.6
NL06-0947 8315 85.1 2 67.0 1.8
NL06-1084 9517 74.3 2 63.0 1.2
NL06-1139 7500 70.7 1.5 71.0 2.4
NL06-1301 8567 61.9 1.5 66.0 1.6
NL06-1465 9647 55.0 1.5 62.0 1.1
NL06-1706 7489 47.2 1* 71.0 2.4
NL06-1921 8433 41.9 1* 67.0 1.7
NL06-2195 9636 36.7 1* 62.0 1.1
NL06-2433 8011 33.1 0.75 68.0 2.0
NL06-2741 9025 29.4 0.75 64.0 1.4
NL06-3132 10312 25.7 0.75 60 0.9
NL06-3380 11129 23.8 0.75 58 0.7
NL06-3862 8477 20.9 0.5 66 1.7
NL06-4352 9553 18.5 0.5 62 1.2
NL06-4973 10916 16.2 0.5 58 0.8
NL06-5500 12000 14.7 0.5 56 0.6
NL06-6285 9105 12.8 0.33 64 1.3
Horsepowers with asterisks are NEMA C-face motors.

3 HP Motor shown
3 HP Motor shown
Motor HP C FP AB TB N P
Ø 3.00 .16 - .25 15.79 5.17 4.84 6.47 5.2 3.43
.33 - .50 16.73 5.71 5.24 7.3 5.2 3.43
.75 - 1.0 17.83 6.5 5.63 7.58 6.02 4.25
6.00 1.5 - 2.0 20.43 7.2 5.83 7.77 6.02 4.25
Ø 4.13 3.0 - 5.0 22.24 7.91 6.26 8.01 6.02 4.25

1.00

1.25 Ø FP
Ø 1.25

AB

P C
N

7.58
1.08
TB 1.83
.88

Ø .75
3.07 3.07
10.77
17.9 (1.25 x Stroke) + 13.4

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 27
 P ro d u c t SCN12 Series
Specifications

Specifications
Maximum Capacity 12 Tons
Maximum Speed 188.5 in/min
Temperature Range -15º to 140º F (-29º to 60º C)
Construction Steel trunnion housing, and thin dense nodular
chrome plated translating tubes. The translating
tubes feature hydraulic cylinder grade wiper seals,
and are guided at both ends by polymeric bearings.
Power Standard brake motors use Class F insulation with
Class B rise (1.15 S.F.) All brake motors are
totally enclosed, fan cooled. IP66 or wash-down
motors are available. Standard brake motors are
UL, CSA, or CE marked, depending on voltage.
Heidenhain Incremental Motor Encoder option
available.
Mounting Trunnion
Load Screw 2.25 x .50 Ball Screw
Limit Switches Independently adjustable. Traveling nut style for
best repeatability and setting ease. CAM type
limits switches are used on Parallel configurations.

28 For additional assistance, contact our Application Engineers at (800) 477-5002.

Product Specifications SCN12 Series
and Dimensions
Series Model Capacity Speed Std. Max Stroke Screw Life
(lbs.) (in/min) HP (inches) (million in.)
SCN12 NZ12-0451 9305 188.5 5 110.0 12.0
NZ12-0572 11802 148.6 5 110.0 5.9
NZ12-0643 13267 132.2 5 110.0 4.1
NZ12-0748 15433 113.6 5 110.0 2.6
NZ12-0837 17270 101.6 5 110.0 1.9
NZ12-0903 18631 94.1 5 107.0 1.5
NZ12-1015 20942 83.7 5 101.0 1.1
NZ12-1181 14620 72.0 3 110.0 3.1
NZ12-1323 16378 64.2 3 110.0 2.2
NZ12-1653 20464 51.4 3 102.0 1.1
NZ12-1851 15277 45.9 2 110.0 2.7
NZ12-2190 18074 38.8 2 109.0 1.6
NZ12-2396 19774 35.5 2 104.0 1.3
NZ12-2497 20608 34.0 2 102.0 1.1
NZ12-2683 16607 31.7 1.5 110.0 2.1
NZ12-2965 18353 28.7 1.5 108.0 1.6
NZ12-3123 19331 27.2 1.5 105.0 1.3
NZ12-3654 22618 23.3 1.5 97.0 0.8
NZ12-3718 15343 22.9 1 110.0 2.7
NZ12-4511 18615 18.8 1 108.0 1.5
NZ12-5396 22267 15.8 1 98.0 0.9
NZ12-6383 24000 13.3 1 89 0.7
NZ12-6967 24000 12.2 1 85 0.7
NZ12-8242 24000 10.3 0.75 91 0.7
NZ12-10098 24000 8.4 0.75 81 0.7
NZ12-10407 24000 8.2 0.75 80 0.7
NZ12-12751 24000 6.7 0.5 89 0.7
NZ12-13186 24000 6.4 0.5 88 0.7
NZ12-14996 24000 5.7 0.5 82 0.7
NZ12-18511 24000 4.6 0.33 91 0.7
NZ12-23611 24000 3.6 0.33 80 0.7
NZ12-27627 24000 3.1 0.25 85 0.7
Largest motor (5HP) shown.

9.72

AB
(1.25 x Stroke) + 16-3/4"
TB P Ø FP

5.79
Ø 1.00

1.14
3.46 1.61 17.4
C

Ø 1.750
1.625
4.00 N
5HP Motor shown

Ø 5.25 7.50

1.50

Motor HP C FP AB TB N P
.33 - .50 25.84 5.71 5.24 11.62 5.2 3.43
.75 - 1.0 25.92 6.5 5.63 11.7 6.02 4.25
1.5 - 2.0 26.11 7.2 5.83 11.9 6.02 4.25
3.0 - 5.0 26.35 7.91 6.26 12.13 6.02 4.25

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994
29
 P ro d u c t
Specifications SCN12 Series
and Dimensions

Series Model Capacity Speed Std. Max Stroke Screw Life

(lbs.) (in/min) HP (inches) (million in.)
SCN12 NU12-0470 9697 180.9 5 110.0 10.6
NU12-0500 10316 170.0 5 110.0 8.8
NU12-0543 11204 156.5 5 110.0 6.9
NU12-0606 12503 140.3 5 110.0 4.9
NU12-0713 14711 119.2 5 110.0 3.0
NU12-0823 17187 102.0 5 110.0 1.9
NU12-0923 19044 92.1 5 106.0 1.4
NU12-1085 13432 78.3 3 110.0 4.0
NU12-1268 15697 67.0 3 110.0 2.5
NU12-1520 18817 55.9 3 107.0 1.5
NU12-1818 15004 46.8 2 110.0 2.9
NU12-2145 17703 39.6 2 110.0 1.7
NU12-2239 18479 38.0 2 108.0 1.5
NU12-2625 21664 32.4 2 99.0 1.0
NU12-2643 16360 32.2 1.5 110.0 2.2
NU12-3234 20018 26.3 1.5 103.0 1.2
NU12-3681 22785 23.1 1.5 96.0 0.8
NU12-4074 16812 20.9 1 110.0 2.0
NU12-4505 18590 18.9 1 108.0 1.5
NU12-9052 24000 9.4 0.75 86.0 0.7
NU12-11078 22857 7.7 0.5 96.0 0.8
NU12-15540 21162 5.5 0.33 100 1.0

9.84

Ø 9.22

6.44

8.11 1.61
1.14

Ø 5.25

Ø 1.00
1.63 (1.25 x Stroke) + 16-3/4"
4.76 16.84
7.50
C
4.00

1.50 10.00

Motor HP C
1/3 11.84
1/2 - 3/4 13.34
1 13.84 Ø 1.75
1 - 1/2 14.84
2 15.84
3 16.07
5 16.52

Important: See page 9 for mounting position code.

30 For additional assistance, contact our Application Engineers at (800) 477-5002.
 Product Specifications SCN12 Series
and Dimensions

Series Model Capacity Speed Std. Max Stroke Screw Life

(lbs.) (in/min) HP (inches) (million in.)
SCN12 NL12-0481 14887 176.7 7.5 110.0 2.9
NL12-0543 16805 156.5 7.5 110.0 2.0
NL12-0611 18910 139.1 7.5 107.0 1.4
NL12-0641 19838 132.6 7.5 104.0 1.2
NL12-0760 15681 111.8 5 110.0 2.5
NL12-0855 17641 99.4 5 110.0 1.8
NL12-0963 19869 88.3 5 104.0 1.2
NL12-1088 13469 78.1 3 110.0 4.0
NL12-1243 15388 68.4 3 110.0 2.7
NL12-1391 17220 61.1 3 110.0 1.9
NL12-1560 19312 54.5 3 105.0 1.3
NL12-1783 14715 47.7 2 110.0 3.0
NL12-1973 16283 43.1 2* 110.0 2.2
NL12-2222 18338 38.3 2* 108.0 1.6
NL12-2539 20955 33.5 2* 101.0 1.1
NL12-2844 27604 29.9 1.5* 110.0 0.5
NL12-3204 19832 26.5 1.5 104.0 1.2
NL12-3661 22661 23.2 1.5 97.0 0.8
NL12-4077 16824 20.8 1 110.0 2.0
NL12-4593 18953 18.5 1 106.0 1.4
NL12-5248 21656 16.2 1 99.0 1.0
NL12-5602 23117 15.2 1 96 0.8
NL12-6401 19811 13.3 0.75 104 1.2
Horsepowers with asterisks are NEMA C-face motors.

Motor HP C FP AB TB N P
.75 - 1.0 19.76 6.5 5.63 9.45 6.02 4.25
1.5 - 2.0 22.32 7.2 5.83 9.64 6.02 4.25
3.0 - 5.0 24.13 7.91 6.26 9.88 6.02 4.25
7.50
1.50

Ø 5.25

5HP Motor shown Ø 4.00

1.63
Ø 1.75 FP

AB

P C
N
(1.25 x Stroke) + 16-3/4"
2.87

1.60
8.87 TB
1.14 7.56

Ø 1.00
4.33
12.67 4.53

19.76

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 31
 P ro d u c t SCN25 Series
Specifications

Specifications
Maximum Capacity 25 Tons
Maximum Speed 259.7 in/min
Temperature Range -15º to 140º F (-29º to 60º C)
Construction Steel trunnion housing, and thin dense nodular
chrome plated translating tubes. The translating
tubes feature hydraulic cylinder grade wiper seals,
and are guided at both ends by polymeric bearings.
Power Standard brake motors use Class F insulation with
Class B rise (1.15 S.F.) All brake motors are
totally enclosed, fan cooled. IP66 or wash-down
motors are available. Standard brake motors are
UL, CSA, or CE marked, depending on voltage.
Heidenhain Incremental Motor Encoder option
available.
Mounting Trunnion
Load Screw 3.0 x .666 Ball Screw
Limit Switches Independently adjustable. Traveling nut style for
best repeatability and setting ease. CAM type
limits switches are used on Parallel configurations.

32 For additional assistance, contact our Application Engineers at (800) 477-5002.

Product Specifications SCN25 Series
and Dimensions
Series Model Capacity Speed Std. Max Stroke Screw Life
(lbs.) (in/min) HP (inches) (million in.)
SCN25 NZ25-0448 14005 250.4 10 161.0 31.7
NZ25-0568 17757 197.5 10 161.0 15.5
NZ25-0670 20945 167.5 10 161.0 9.5
NZ25-0831 25979 135.0 10 161.0 5.0
NZ25-0980 30637 114.5 10 161.0 3.0
NZ25-1138 26682 98.6 7.5 161.0 4.6
NZ25-1411 33083 79.5 7.5 160.0 2.4
NZ25-1667 26057 67.3 5 161.0 4.9
NZ25-2018 31543 55.6 5 161.0 2.8
NZ25-2138 33419 52.5 5 159.0 2.3
NZ25-2245 35091 50.0 5 155.0 2.0
NZ25-2371 22236 47.3 3 161.0 7.9
NZ25-2588 24272 43.4 3 161.0 6.1
NZ25-2870 26916 39.1 3 161.0 4.5
NZ25-3193 29946 35.1 3 161.0 3.2
NZ25-3777 35423 29.7 3 154.0 2.0
NZ25-4202 39409 26.7 3 146.0 1.4
NZ25-4485 42063 25.0 3 142.0 1.2
NZ25-5297 49678 21.2 3 130.0 0.7
NZ25-6412 40090 17.5 2 145.0 1.4
NZ25-6589 41197 17.0 2 143.0 1.2
NZ25-7976 49869 14.1 2 130 0.7
NZ25-8874 50000 12.6 2 123 0.7
NZ25-10088 47305 11.1 1.5 133 0.8
NZ25-11223 50000 10.0 1.5 127 0.7
NZ25-12693 39681 8.8 1 146 1.4
NZ25-16146 50000 6.9 1 129 0.7
NZ25-19069 44710 5.9 0.75 137 1.0
NZ25-23083 50000 4.9 0.75 125 0.7
NZ25-28714 44883 3.9 0.5 137 1.0
NZ25-40858 42151 2.7 0.33 141 1.2
NZ25-48256 49783 2.3 0.33 130 0.7

AB C

(1.25 x Stroke) + 22.15

TB P Ø FP
Ø 1.50
7.01

1.875 Shown with largest

motor (10HP).
2.57 20.1
4.13
Ø 2.250

N
2.00

2.500 Ø 7.25 9.50 8.90

5.875

Motor HP C FP AB TB N P
.33 - .50 23.19 5.71 5.24 14.05 5.2 3.43
.75 - 1.0 24.41 6.5 5.63 14.13 6.02 4.25
1.5 - 2.0 26.45 7.2 5.83 14.33 6.02 4.25
3.0 - 5.0 28.27 7.91 6.26 14.57 6.02 4.25
7.5 - 10 33.19 10.47 7.72 14.37 7.28 5.47

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 33
 P ro d u c t
Specifications SCN25 Series
and Dimensions

Series Model Capacity Speed Std. Max Stroke Screw Life

(lbs.) (in/min) HP (inches) (million in.)
SCN25 NU25-0432 13505 259.7 10 161.0 35.3
NU25-0501 15662 224.0 10 161.0 22.7
NU25-0529 16537 212.1 10 161.0 19.2
NU25-0571 17850 196.5 10 161.0 15.3
NU25-0633 19789 177.3 10 161.0 11.2
NU25-0717 22415 156.5 10 161.0 7.7
NU25-0870 27198 129.0 10 161.0 4.3
NU25-0946 29574 118.6 10 161.0 3.4
NU25-1071 33481 104.8 10 159.0 2.3
NU25-1300 40640 86.3 10 144.0 1.3
NU25-1538 36060 73.0 7.5 153.0 1.9
NU25-1759 41242 63.8 7.5 143.0 1.2
NU25-1888 44267 59.4 7.5 138.0 1.0
NU25-2036 31824 55.1 5 161.0 2.7
NU25-2500 39077 44.9 5 147.0 1.5
NU25-3050 28605 36.8 3 161.0 3.7
NU25-3343 31352 33.6 3 161.0 2.8
NU25-3546 33256 31.6 3 159.0 2.4
NU25-4080 38264 27.5 3 148.0 1.6
NU25-5555 50000 20.2 3 127.0 0.7
NU25-8161 50000 13.7 2 129.0 0.7
NU25-10019 46982 11.2 1.5 134 0.8
NU25-13403 41900 8.4 1 142 1.2

Ø 10.81
7.59

9.88
1.88

Ø 7.25
Ø 1.50

2.63
2.00
5.67 9.50 (1.25 x Stroke) + 22.15 19.09

c
5.88

Motor HP C
1/2 - 3/4 14.12
1 14.62
1 - 1/2 15.8 2.50 11.97
2 16.8
3 16.86
5 17.31
7.5 22.79
10 25.49

Ø 2.25
Important: See page 9 for mounting position code.
34 For additional assistance, contact our Application Engineers at (800) 477-5002.
Product Specifications SCN25 Series
and Dimensions
Series Model Capacity Speed Std. Max Stroke Screw Life
(lbs.) (in/min) HP (inches) (million in.)
SCN25 NL25-0848 26510 132.3 10 161.0 4.7
NL25-1073 33544 104.6 10 159.0 2.3
NL25-1268 39640 88.5 10 146.0 1.4
NL25-1349 42172 83.2 10 141.0 1.2
NL25-1573 49175 71.3 10 131.0 0.7
NL25-1708 40046 65.7 7.5 145.0 1.4
NL25-2023 31621 55.5 5 161.0 2.8
NL25-2391 37373 46.9 5 150.0 1.7
NL25-2503 39124 44.8 5 147.0 1.5
NL25-2966 46361 37.8 5 135.0 0.9
NL25-3561 33397 31.5 3 159.0 2.3
NL25-3805 35685 29.5 3 154.0 1.9
NL25-4036 37852 27.8 3 149.0 1.6
NL25-4770 44736 23.5 3 137.0 1.0
NL25-4994 46836 22.5 3 134.0 0.8
NL25-5917 50000 19.0 3 123.0 0.7
NL25-6408 40065 17.5 2 145.0 1.4
NL25-7591 47462 14.8 2 133.0 0.8
NL25-8417 50000 13.3 2 127.0 0.7
NL25-9350 50000 12.0 2 120.0 0.7
NL25-11077 50000 10.1 1.5 127.0 0.7
NL25-11770 50000 9.5 1.5* 124 0.7
NL25-13944 43591 8.0 1* 139 1.1
NL25-15874 49625 7.1 1* 130 0.7
NL25-18806 50000 6.0 1* 120 0.7
NL25-19745 46295 5.7 0.75 135 0.9
NL25-23392 50000 4.8 0.75 124 0.7
NL25-24972 50000 4.5 0.75 120 0.7
NL25-29585 46244 3.8 0.5 135 0.9
Horsepowers with asterisks are NEMA C-face motors.

Ø 2.25
5HP Motor Shown Motor HP C FP AB TB N P
.33 - .50 19.47 5.71 5.24 9.82 5.2 3.43
.75 - 1.0 20.69 6.5 5.63 9.9 6.02 4.25
Ø 5.88 1.5 - 2.0 22.73 7.2 5.83 10.09 6.02 4.25
3.0 - 5.0 24.55 7.91 6.26 10.33 6.02 4.25
7.5 - 10 29.47 10.47 7.72 10.13 7.28 5.47

9.50 Ø 7.25

2.50 Ø FP

2.00

AB

10.32 N

(1.25 x Stroke) + 22.15

.94
2.54
TB
1.88

Ø 1.50
4.96
14.14 7.09 4.33
21.54

Important: See page 9 for mounting position code.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 35
 Accessories Trunnion Blocks

Duff-Norton SCN SuperCylinders are available with trunnion mounting only and are fitted
with trunnion pins as standard. The SCN Series trunnion pins are designed to fit stan-
dard dimension radial spherical plain bearings (Torrington type SF, or SKF type GEZ, for
example). Duff-Norton offers Trunnion Blocks to facilitate the installation of SCN series
SuperCylinders. These blocks are solid steel and house properly sized spherical plain
bearings. The blocks are drilled for mounting either as a conventional pillow blocks or as
a flange units. Heat-treated fasteners should be used for all attachments.

If Duff-Norton Trunnion Blocks are not chosen for the SuperCylinder’s installation, we
strongly recommended that the trunnion pins be supported by some type of self-aligning
bearing, as perfect alignment of trunnion support bearings is difficult to achieve. Standard
pillow blocks are not recommended, as their maximum static load rating is usually less
than that of the SuperCylinder. In addition, most pillow blocks use gray cast iron frames,
which are subject to fracture under heavy loads.

Order trunnion blocks per the following chart: SuperCylinder series Mounting Blocks (2 req’d)
NZ03, NL03, NU03 Part No. NZ03-510
NZ06, NL06, NU06 Part No. NZ06-510
NZ12, NL12, NU12 Part No. NZ12-510
NZ25, NL25, NU25 Part No. NZ25-510

Trunnion Block Specifications

Ø A J

D
This side toward
H Actuator
F
E
B

Flush

H G For K" Screw

Capacity Part # A B C D E F G H J K
3 Ton NZ03-510 1.00 1.31 3.87 2.50 1.00 0.50 3.00 1.75 3/8"-16 1/2"
6 Ton NZ06-510 1.25 1.56 4.50 3.00 1.12 0.56 3.50 2.00 1/2"-13 5/8"
12 Ton NZ12-510 1.75 2.06 5.50 4.00 1.50 0.75 4.25 2.75 5/8"-11 3/4"
25 Ton NZ25-510 2.25 2.56 7.50 5.00 2.00 1.00 5.50 3.25 3/4"-10 1-1/4"
36 For additional assistance, contact our Application Engineers at (800) 477-5002.
Flexible Couplings Accessories

When SuperCylinders are used in tandem, or in multiple

arrangements, flexible couplings, and shafting (see page 38)
are required to transmit power.

Jaw Type Couplings

• No need for lubrication.
• Are smaller and lighter than other equally rated couplings.
• Are recommended for use with actuators through 3-ton capacity.
Full-Flex and Flex-Rigid Gear Couplings
• Give great strength under load due to compact design and construction.
• Allow for incremental system adjustment.

Ordering the Right Couplings

1. Flexible couplings are made up of three components 3. Verify the required coupling torque. Make sure it’s
which must be ordered separately. Select two hubs not greater than the maximum rating in the
each with a bore and keyway to match the shafts accompanying coupling tables.
being coupled and a sleeve kit (for gear-type cou- 4. Full-flex gear couplings are recommended for
plings) or a spider (for jaw-type couplings). The close coupled arrangements.
bores in the coupling hubs are sized to give a slip fit 5. Flex-rigid gear couplings are recommended for
on actuator worm shafts. floating shaft arrangements with the rigid hub
2. Determine required coupling torque with the following mounted to the floating shaft.
formula: 6. For maximum performance, the actuators, shafts,
Torque Requirement per Actuator X Number of gear boxes and motor should be carefully aligned.
Actuators to Be Driven by the Coupling.
Refer to gear coupling specs chart, below.

Gear Coupling Specifications

Misalignment (Max)
Torque WR2
"S"HT Flex Hub Ridgid Hub Sleeve** Kit A B C D E F H Keyway Wt.
Rating Lbs. In.2
Parallel Angular
Bore Part No. Part No. Part No. Lbs.*
(In.-Lbs.) Solid Core
0.751 6.300 SK-2405-H SK-2404-H SK-2405-S 3 5/16 2 1/8 1 1/2 2 3 1/8 2 1/8 3/16 x 3/32 5 6 + 1/2º
1.001 6.300 SK-2410-H SK-2409-H SK-2405-S 3 5/16 2 1/8 1 1/2 2 3 1/8 2 1/8 1/4 x 1/8 5 6 + 1/2º
1.376 18.900 SK-2425-H SK-2424-H SK-2425-S 3 3/4 2 17/32 1/8 1 13/16 2 3/8 3 3/4 2 21/32 5/16 x 5/32 8 13 + 1/2º
1.501 18.900 SK-2450-H SK-2449-H SK-2425-S 3 3/4 2 17/32 1/8 1 13/16 2 3/8 3 3/4 2 21/32 3/8 x 3/16 8 13 + 1/2º
1.751 50.000 SK-2499-H SK-2498-H SK-2499-S 4 3/4 2 9/16 1/8 2 1/16 3 1/4 4 1/4 2 11/16 1/2 x 1/4 13 33 + 1/2º

*Includes sleeve kit and two hubs. **Kit includessleeve, 2 seals, 2 retaining rings and 2 lube hole plugs
***Tolerance for all bores is +.001 and -.000, +.005 Flex, .000 Rigid

Jaw Type Coupling Specifications

"S" ** Torque Rating Spider Part Wt. WR2 Lbs. In.2 Misalignment (Max)
Hub Part No. A B C D E F Keyway
Bore (In.-Lbs.) No. Lbs.* Solid Core Parallel Angular
.501 250 SK-2402J-H1 SK-2402-JS 1 3/4 15/32 1/2 13/16 1 3/4 2 1/8 1/8 x 1/16 1 .386 .015 1/2º
.626 250 SK-2402J-H2 SK-2402-JS 1 3/4 15/32 1/2 13/16 1 3/4 2 1/8 3/16 x 3/32 1 .386 .015 1/2º

*Weights includes spider and two hubs. **Tolerance for all bores is +.001 and .000

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 37

 Accessories SuperCylinder Shafts

Some applications may demand more than one SuperCylinder for synchronized lifting.
An example of how this could be achieved is with our SCW Series SuperCylinders. The first
cylinder would be motorized and connected to the second cylinder via a shaft and couplings
connected to the worm gear extensions. The second cylinder would be mounted with a limit
switch for control purposes.

Duff-Norton provides a wide assortment of shafting designed to coordinate with our

SuperCylinders and couplings to meet a wide range of system requirements. Shafting is
made from cold-finished 1141 steel, with ends machined to ANSI-standard keyways. For
more shaft information, please see the tables below and on page 39.

keyway shaft keyway DØ

Dimensions and Minimum Size

Model SH50 SH63 SH75 SH100 SH125 SH150 SH163 SH175 SH200 SH225 SH250

Minimum Shaft Length* "L" (in.) 5 5 5 5 6 7 7 7 8 10 10

Nominal 1/2 5/8 3/4 1 1 1/4 1 1/2 1 5/8 1 3/4 2 2 1/4 2 1/2
Shaft Diameter
"D" (in.) 0.500 0.625 0.750 1.000 1.250 1.500 1.625 1.750 2.000 2.250 2.500
Actual
0.498 0.623 0.748 0.998 1.248 1.498 1.623 1.748 1.997 2.247 2.497
Keyway Width (in.) 1/8 3/16 3/16 1/4 1/4 3/8 3/8 3/8 1/2 1/2 5/8

Keyway Flat (in.) 1.25 1.25 1.25 1.25 1.5 1.75 1.75 2 2 2.5 2.5

NOTE: Minimum shaft length may vary depending on the specified coupling.

38 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SuperCylinder Shafts Accessories

Shaft selection criteria

Chart Directions:

1. Find a torque value that is greater than or equal to your

calculated torque requirements.
2. Use the second column to find the required shaft diameter
(rounding up is recommended.)
3. Check the third column for the maximum allowable shaft
span before supports are required.
4. Match your selected shaft’s maximum allowable speed
(rpm) to actual shaft speed (rpm). Increasing your selected
shaft size is recommended until it falls into the allowable range.

Maximum** RPM's Not to Exceed ***

Typical Nominal Distance
Shaft Shaft Between
Torque Diameter* Supports Typical Shaft Lengths: (Inches)
(Inch/Lbs.) (Inches) (Inches) 36 48 60 72 84 96 108 120 132 144 156
20 0.51 54.60 1802 1014 649 450 331 253 200 162 134 113 96
40 0.73 61.30 2143 1205 771 536 394 301 238 193 159 134 114
50 0.81 65.50 2372 1334 854 593 436 333 264 213 176 148 126
80 0.87 68.80 2548 1433 917 637 468 358 283 229 190 159 136
100 0.92 71.40 2695 1516 970 674 495 379 299 243 200 168 143
150 1.01 76.30 2982 1677 1074 746 548 419 331 268 222 186 159
200 1.09 80.10 3204 1802 1154 801 589 451 356 288 238 200 171
250 1.15 83.10 3388 1906 1220 847 622 476 376 305 252 212 180
300 1.21 85.70 3546 1995 1277 887 651 499 394 319 264 222 189
350 1.25 87.90 3686 2073 1327 921 677 518 410 332 274 230 196
400 1.30 89.90 3811 2144 1372 953 700 536 423 343 283 238 203
450 1.34 91.70 3925 2208 1413 981 721 552 436 353 292 245 209
500 1.37 93.30 4029 2266 1451 1007 740 567 448 363 300 252 215
600 1.44 96.20 4217 2372 1518 1054 775 593 469 380 314 264 225
700 1.49 98.70 4383 2465 1578 1096 805 616 487 394 326 274 233
800 1.54 100.90 4532 2549 1631 1133 832 637 504 408 337 283 241
900 1.59 102.90 4667 2625 1680 1167 857 656 519 420 347 292 249
1000 1.63 104.70 4792 2695 1725 1198 880 674 532 431 356 299 255
1250 1.72 108.70 5067 2250 1824 1267 931 712 563 456 377 317 270
1500 1.80 112.00 5303 2983 1909 1326 974 746 589 477 394 331 282
1750 1.92 114.90 5511 3100 1984 1378 1012 775 612 496 410 344 293
2000 1.94 117.50 5698 3205 2051 1425 1047 801 633 513 424 356 303
2250 2.00 119.80 5869 3301 2113 1467 1078 825 652 528 437 367 313
2500 2.05 122.00 6025 3389 2169 1506 1107 847 669 542 448 377 321
3000 2.15 125.70 6306 3547 2270 1577 1158 887 701 568 469 394 336
3250 2.19 127.40 6434 3619 2316 1608 1182 905 715 579 479 402 343
3500 2.23 129.00 6554 3687 2359 1639 1204 922 728 590 487 410 349
4000 2.31 131.90 6776 3812 2440 1694 1245 953 753 610 504 424 361
4500 2.38 134.50 6979 3926 2512 1745 1282 981 775 628 519 436 372
5000 2.44 136.90 7165 4030 2579 1791 1315 1008 796 645 533 448 382
6000 2.55 141.10 7499 4218 2700 1875 1377 1055 833 675 558 469 399
7000 2.65 144.80 7794 4384 2806 1949 1432 1096 866 701 580 487 415

Note: Shaded area exceeds maximum distance between supports. Additional support is required.
* Shaft diameter is based on 0.08 degrees twist per foot of length.
** Maximum distance between supports is based on a maximum allowable deflection of 0.01 inches per foot of
length.
*** Maximum allowable RPM’s is based on 80% of critical shaft speed.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

39
 Accessories Programmable Digital
Position Indicator

Displays position of actuator lifting screws in incre-

The Duff-Norton Digital Position
ments of up to .001", depending on pulses per rev-
Indicator provides a high degree of
olution (Accuracy is relative to ratio and backlash. accuracy and versatility when incor-
Please consult factory for details). porated in SuperCylinder systems.
Operating as a revolution counter, it
• For use in precision positioning applications with Duff-
is ideal for use in a wide range of
Norton 2 through 25 ton SuperCylinders.
precision positioning applications to
• Field programmable from front panel to control up/down
indicate inches or millimeters of lifting
travel limits.
screw travel. Two built-in relays act
• Non-volatile E2-PROM Memory retains all programmed
as limit switches for travel limit con-
information and count value in event of power interruption.
trol. Start-up/shut-off, audio/visual
• Two adjustable up/down output limits with 0 to +/- 999999.
warning, multiple actuator system
• Five digit input scaling with 0.0000 to +/- 5.000, program-
sequencing or the initiation of subse-
mable decimal point location and lead zero blanking.
quent operations may also be con-
• Compact, die cast NEMA 4 rated front panel has six digit
trolled.
LED display with 0.56" high characters and negative sign
(-). Display convertible to English, metric or other units of
The indicator is furnished as a com-
measurement.
plete kit which includes a sealed digi-
• Shaft encoder drive gives precise, reliable and mainte-
tal readout panel (designed to fit a
nance-free operation.
21/2" x 5" panel cut-out), an optical
• Programmable front panel functions may be locked out to
shaft encoder, and mating 6-pin con-
prevent unauthorized adjustment.
nector with 10-foot cable.
• On-line self-test permits complete check of all functions and
reset capability allows reset to zero from front panel.
Electrical connections are made at
• Input power requirement is 115 VAC, 50/60 Hz.
the rear of the unit to UL recognized
• Can be provided with optional 20 ma. current loop to pro-
terminal strips. Clamp-type pressure
vide capability of 2-way digital communication.
plate terminals accept AWG-14 wire
without lugs.

40 For additional assistance, contact our Application Engineers at (800) 477-5002.

Worm Shaft Encoder Accessories

This encoder is designed for harsh factory and

plant floor environments. It is shock rated at 75
Gs for 11 milliseconds duration. The bearings
are rated for 80 pounds maximum axial and
radial shaft loading for long life. The encoder
has very low drag and can be held in place
with a simple cable tie.

Note: If using this type of encoder, Duff-Norton

rotary limit switch can not be used. If both
Duff-Norton rotary limit switch and encoder are
required, use ring type encoder.

Encoder Dimensions

Pulses Per Revolution......................................................................................10

Input Voltage ....................................................................................5 to 28 VDC
Input Current ....................................................................................100mA max
Output ........................................................Open collector will sink up to 100mA
Quadrature Phasing ..............................................90 electrical degrees ± 22.5°
Rise Time ....................................................................Less then 1 Microsecond
Operating Temperature ..................................................32° - 158° F (0°- 70° C)

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 41

 Accessories Ring Kit Encoder

Factory installed ring kit encoder for SCW

SuperCylinders. The encoder is mounted between
the motor and adaptor or reducer. The actuator
worm shaft opposite the encoder is free for driving
another actuator or for a limit switch.

Available for 56C and 140TC motors.

Dual channel quadrature design measures both
motor speed and direction.

Specifications

Sensor Type Bidirectional shaft speed sensor

Pulse Per Revolution 60 cycles each channel
Supply Voltage +12 Volts DC +/-5%
Supply Current 60 mA typlical (115 mA maximum)
Output Drive Capability 250 mA per channel continuous
Maximum Load 50 ohms per channel

To obtain a SuperCylinder with a ring kit encoder specify ring kit

encoder at time of order.

42 For additional assistance, contact our Application Engineers at (800) 477-5002.

 SCW Series Limit Switches Accessories

SKA-6000-A Rotary
Limit Switch

Features
Standard on all Duff-Norton SCW Series SuperCylinders.

• Sturdy and compact. Constructed of corro- •Simple to adjust. Two microswitches, one
sion- resistant materials, with housing of for up/stop and one for down/stop, are acti-
anodized aluminum. Meets NEMA-4 water vated by the adjustable limit-switch nuts
tightness requirements. which travel laterally when the internal
• Lifetime lubricated. screw is rotated through gear reduction.
• Can be mounted on right or left extension •Can be used in applications where there is
of actuator worm shaft. Switch already a need to limit the rotation of equipment
mounted in its optional position. that rotates and/or reverses.
• Optional 4-position limit switch available. •Operating temperature range
Consult factory for dimensions. -20° to + 150°F.

Electrical Specifications
Wiring Diagrams and Voltage
CAUTION: DISCONNECT POWER BEFORE MAKING ANY ADJUSTMENT
To Adjust Limit Switch Settings:

1. Check drift before adjusting limits.

2. Remove screw "A" and nut guide keeper "B"
to adjust limits.
3. Run actuator unit to desired limit.
4. Rotate appropriate nut until switch clicks, then
turn 1/2 turn more.
5. Replace "A" and "B. "
6. Run actuator unit to other limit.
7. Repeat steps 2, 4 and 5 to adjust this nut.

N.O. = Normally Open

N.C. = Normally Closed

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

43
 Accessories SCN Series Limit Switches

Features
Designed for SCN Series SuperCylinders
(Offset and Right Angle Configurations, see pg. 5 for mounting positions.)
• Multi-turn, traveling nut style limit switch • Precision, snap-action switches elimi-
offers superior repeatability, easy adjust- nate contact bounce.
ment. • Terminal strip for easy connections.
• Extend and retract positions independently • Rated 10 amps, 250 vac.
adjustable, with actuator installed. • Switch gear ratio matched to actuator
• Fully gasketed aluminum housing sealed model to assure best switch function.
against dirt and water entry.

Electrical Specifications
Wiring Diagrams and Voltage

CAUTION: DISCONNECT POWER BEFORE MAKING ANY ADJUSTMENT

To Adjust Limit Switch Settings:

1. Run actuator or rotate tube to desired

retracted position. Be careful not to jam actuator.
Turn off power.

2. Pry up nut guide just enough to turn nuts and turn

brass nut toward switch until the switch clicks. Turn
3 notches farther. Drop nut guide into notch.

3. Restore power. Run actuator out and run back in

until switch stops it. Do not let tube rotate. Check
stopping point.

4. If more adjustment is necessary, turn off power

and adjust nut a few notches. Each notch is approx.
1/16". Turning nut toward switch makes actuator
stop sooner; turning nut away from switch makes
actuator travel farther.
Extend Retract
Extend

Retract
Circuit

Circuit

Adjust Adjust
5. Repeat steps 3 and 4 until desired setting is (Silver Nut) (Brass Nut)

obtained.
Normally Closed switches rated 15 amps, 277 VAC Maximum.

6. Run actuator to the desired extended position,

being careful not to jam. Turn off power.

7. Repeat steps 2 through 5 for the silver nut until

desired extended setting is obtained.

44 For additional assistance, contact our Application Engineers at (800) 477-5002.

 Notes

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994 45

 Terms and Conditions
All sales by Seller are made pursuant to the following terms. No other or additional terms or conditions are or will be accepted.
ACCEPTANCE OF ORDERS -
All orders, whether placed directly or through an agent, and all subsequent amendments thereto, are subject to a final approval and acceptance by Seller s main office.
LIMITATION OF WARRANTIES, REMEDIES AND DAMAGES –
THE WARRANTY STATED BELOW IS GIVEN IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTIC-
ULAR PURPOSE OR OTHERWISE. NO PROMISE OR AFFIRMATION OF FACT MADE BY ANY AGENT OR REPRESENTATIVE OF SELLER SHALL CONSTITUTE A
WARRANTY BY SELLER OR GIVE RISE TO ANY LIABILITY OR OBLIGATION.
Seller warrants that on the date of its delivery to carrier the goods are free from defects in workmanship and materials.
SELLER S SOLE OBLIGATION IN THE EVENT OF BREACH OF WARRANTY OR CONTRACT OR FOR NEGLIGENCE OR OTHERWISE WITH RESPECT TO GOODS
SOLD SHALL BE EXCLUSIVELY LIMITED TO REPAIR OR REPLACEMENT, F.O.B. SELLER S POINT OF SHIPMENT, OF ANY PARTS WHICH SELLER DETERMINES
TO HAVE BEEN DEFECTIVE or if Seller determines that such repair or replacement is not feasible, to a refund of the purchase price upon return of the goods to Seller.
Any action against Seller for breach of warranty, negligence or otherwise must be commenced within one year after such cause of action accrues.
NO CLAIM AGAINST SELLER FOR ANY DEFECT IN THE GOODS SHALL BE VALID OR ENFORCEABLE UNLESS BUYER S WRITTEN NOTICE THEREOF IS
RECEIVED BY SELLER WITHIN ONE YEAR FROM THE DATE OF SHIPMENT.
Seller shall not be liable for any damage, injury or loss arising out of the use of the goods if, prior to such damage, injury or loss, such goods are (1) damaged or misused
following Seller s delivery to carrier; (2) not maintained, inspected, or used in compliance with applicable law and Seller s written instructions and recommendations; or (3)
installed, repaired, altered or modified without compliance with such law, instructions or recommendations.
UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES AS THOSE TERMS ARE DEFINED IN SECTION 2-
715 OF THE UNIFORM COMMERCIAL CODE.
TERMS OF PAYMENT -
Unless otherwise stated herein, payment of each invoice is required within thirty (30) days after date of shipment. Any balance unpaid after the required payment date shall
be subject to a service charge of 1% per month from such date.
PRICE ADJUSTMENTS -
Amendments made by the Buyer to orders already placed shall, without formal notice to the Buyer, be subject to extra charges. If the estimated shipping date for the goods
is more than sixty (60) days after date of order, the price of the goods are subject to increase by Seller.
TAXES -
Any sales, use, excise, and other taxes applicable to this transaction and the goods and/or services furnished by Seller are not included in the price and shall be paid by
Buyer when due. If Seller pays any such taxes, Buyer shall reimburse Seller upon demand.
INDEMNIFICATION AND SAFE OPERATION -
Buyer shall comply with and require its employees to comply with directions set forth in instructions and manuals furnished by Seller and shall use and require its employees
to follow such instructions and manuals and to use reasonable care in the use and maintenance of the goods. Buyer shall not remove or permit anyone to remove any warning
or instruction signs on the goods. In the event of personal injury or damage to property or business arising from the use of the goods, Buyer shall, within forty-eight (48) hours
thereafter, give Seller written notice of such injury or damage. Buyer shall cooperate with Seller in investigating any such injury or damage and in the defense of any claims
arising therefrom.
If Buyer fails to comply with this section or if any injury or damage is caused, in whole or in part, by Buyer s failure to comply with applicable federal or state safety require-
ments, Buyer shall indemnify and hold Seller harmless against any claims, loss or expense for injury or damage arising from the use of the goods.
GOVERNING LAW -
This agreement shall be governed by and construed under the laws of the State of New York.
DELIVERY AND DELAYS -
Unless otherwise specified herein, deliveries shall be F.O.B. Seller s point of shipment and risk of loss shall pass to Buyer upon Seller s delivery to carrier. All shipping dates
are approximate and Seller shall not be liable for loss or damage because of delays occasioned by labor disputes, damage to facilities, or failure of suppliers or subcontractors
to meet scheduled deliveries or any other cause beyond Seller s reasonable control or making its performance commercially impracticable.
Not withstanding other provisions hereof, if shipment is delayed at Buyer s request, the goods shall be deemed to be stored at Buyer s risk and expense and Seller may
thereupon bill Buyer for the full price and storage costs. Buyer shall pay such bill within 30 days after mailing thereof.
BUYER’S INSPECTION UPON RECEIPT OF SHIPMENT -
Buyer shall inspect the goods as soon as received. If any loss or damage is discovered, Buyer must notify both the carrier and Seller at once. Seller will cooperate with
Buyer in filing claims with the carrier.
CHANGES AND CANCELLATION -
Seller reserves the right to change or cancel any order whenever circumstances require allocation of production or delivery or Seller deems change or cancellation to be
necessary to comply with applicable laws, ordinances, regulations, directives or administrative actions. Seller reserves the right to make changes in materials or design which it
determines appropriate for the goods.
SECURITY INTEREST AND REPOSSESSION -
Until full payment has been made therefor, Seller shall have a security interest in goods shipped to Buyer and the goods shall remain personal property. Upon request
Buyer shall execute and deliver to Seller security agreements and financing statements further evidencing Seller s security interest. Buyer authorizes Seller to file a financing
statement or statements relating to the goods, without Buyer s signature thereon, as Seller may deem appropriate and appoints Seller as Buyer s attorney-in-fact for the limited
purpose of executing (without requiring Seller to do so) financing statements in Buyer s name and performing other acts which Seller deems appropriate to perfect and continue
its security interest and to protect and preserve the goods.
In the event Buyer defaults in making any payment due Seller, Seller in addition to any other rights or remedies provided by law, shall have the right, with or without legal
process, to enter the place where said goods are located and to repossess the goods in accordance with the Uniform Commercial Code.
ASSURANCES -
Shipment by Seller shall at all times be subject to the prior approval of its credit personnel and Seller may, at any time, decline to make shipment except upon receipt of prior
payment or upon other terms and conditions or security satisfactory to such personnel.
PATENTS -
Except as to goods manufactured according to design supplied by Buyer, Seller will defend and hold Buyer free and harmless in a suit or proceeding brought against Buyer
insofar as it is based on a claim that use of the goods by Buyer constitutes an infringement of any existing U.S. Patents, provided, however, that Buyer gives Seller prompt writ-
ten notice of such suit or proceeding; permits Seller, through its counsel, to defend and/or settle the same; and gives Seller all necessary information, assistance and authority
to enable Seller so to do. If Buyer s use of the goods is held to constitute infringement and further use is enjoined, Seller shall, at its option, either (i) procure for Buyer the right
to continue using the goods; or (ii) replace the goods with non-infringing goods; or (iii) modify the goods to non-infringing goods. The foregoing states Seller s entire liability for
patent infringement and shall not be construed to render Seller liable for damages based on product output.
MISCELLANEOUS -
This instrument constitutes the entire agreement between Seller and Buyer, superseding all previous understandings and writings regarding this transaction. Any amend-
ment or modification of this Agreement shall be void unless in writing and signed by Seller.
No delay or omission by Seller in exercising any right or remedy hereunder shall be a waiver thereof or of any other right or remedy, and no single or partial exercise thereof
shall preclude any other or further exercise thereof or the exercise of any other right or remedy. All rights and remedies of Seller are cumulative.
Sales made pursuant to this Agreement shall be governed by the Uniform Commercial Code as the same may from time to time be construed and in effect in the state
wherein Seller has its main office.
ARBITRATION -
All disputes that may arise between the parties regarding the interpretation of the contract and the legal effect of the contract shall, to the exclusion of any court of law, be
arbitrated and determined in accordance with the latest Commercial Arbitration Rules of the American Arbitration Association. The arbitration proceeding shall be held in the
city in that state where the principal office of the Seller is located. The parties recognize and consent to the above mentioned arbitration association s jurisdiction over each and
every one of them.

46 USTS rev. 2/98

 O t h e r P ro d u c t s
Duff-Norton also manufactures

Mechanical Actuators

E l e c t ro m e c h a n i c a l A c t u a t o r s

Rotary Unions

Mechanical Jacks

WARNING
The equipment shown in this catalog is intended for industrial use only and
should not be used to lift, support, or otherwise transport people unless you
have a written statement from the Duff-Norton Company which authorizes the
specific actuator unit as used in your applications suitable for moving people.

www.duffnorton.com • Ph: (800) 477-5002 • Fax: (704) 588-1994

47
 ®

P.O. Box 7010 • Charlotte, NC 28241-7010

Phone: (800) 477-5002 • (704) 588-4610
Fax: (704) 588-1994
Email: [email protected]
www.duffnorton.com

© Yale Industrial Products, Inc., Duff-Norton Division, 2005

All rights reserved by Yale Industrial Products, Inc., Duff-Norton Division.
May not be copied in whole or in part. SCCAT-2
Printed in the USA 7.5M 11/05