Scribd
Upload
171 views1 page

Ms Hyvolt III Iec 1-8-15

HyVolt III is an inhibited electrical insulating oil produced from severely hydrotreated naphthenic oil to meet IEC 60296 specifications. It has excellent electrical and thermal properties including a breakdown voltage of 75kV, viscosity of 9.7 mm2/s at 40°C, and pour point of -66°C. The oil is non-corrosive and passes various tests for oxidation stability, acidity, and contaminants with typical values well within specifications.

Uploaded by

dchy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
171 views1 page

Ms Hyvolt III Iec 1-8-15

HyVolt III is an inhibited electrical insulating oil produced from severely hydrotreated naphthenic oil to meet IEC 60296 specifications. It has excellent electrical and thermal properties including a breakdown voltage of 75kV, viscosity of 9.7 mm2/s at 40°C, and pour point of -66°C. The oil is non-corrosive and passes various tests for oxidation stability, acidity, and contaminants with typical values well within specifications.

Uploaded by

dchy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HyVolt III

Electrical Insulating Oil Marketing Specification



The inhibited electrical insulating oil, HyVolt III, is produced from a severely hydrotreated naphthenic oil to meet the specification
requirements defined in IEC 60296, ed. 4, 2012, special applications.
TEST DESCRIPTION TEST METHOD SPECIFICATIONS TYPICAL VALUES
Function MIN MAX
Viscosity, mm2/s at 40°C ISO 3104 12.0 9.7
Viscosity, mm /s at -30°C
2
ISO 3104 1800 1092
Pour Point, °C ISO 3016 -40 -66
Water Content, mg/kg IEC 60814 30 5
Breakdown Voltage, kV, Before treatment, 2.5 mm IEC 60156 30 57
Breakdown Voltage, kV, After treatment, 2.5 mm IEC 60156 70 75
Density at 20°C, g/ml ISO 12185 0.895 0.875
DDF at 90°C IEC 60247 0.005 0.001

Refining/Stability
Appearance IEC 60296 PASS PASS
Acidity, mg KOH/g IEC 62021-1 0.01 <0.01
Interfacial Tension, mN/m ASTM D 971 40 48
Corrosive Sulfur DIN 51353 Noncorrosive Noncorrosive
Corrosive Sulfur ASTM D 1275, B Noncorrosive Noncorrosive
Corrosive Sulfur IEC 62535 Noncorrosive Noncorrosive
DBDS, mg/kg IEC 62697-1 Not detected (<5) Not detected
Inhibitors, % IEC 60666 0.08 0.40 0.36
Metal Passivator Additives, mg/kg IEC 60666 Not detected (<5) Not detected
Other Additives IEC 60296 See ª
Sulfur, wt% ISO 14596 0.15 0.008
Furfural Content, mg/kg IEC 61198 Not detected (<0.05) Not detected
Carbon Type Analysis, % IR-Brandes
Ca 6
Cn 47
Cp 47

Performance
Oxidation Stability at 120°C, 500 hours IEC 61125, C
Total Acidity, mg KOH/g 0.30 0.01
Sludge, % 0.05 0.01
DDF at 90°C 0.050 0.013

Health, Safety and Environment


Flash Point, PMCC, °C ISO 2719 135 144
PCA Content, % IP 346 3 <3
PCB Content, mg/kg IEC 61619 Not detected (<2) Not detected

Dated: 1-8-2015
HyVolt III is a product of Ergon Refining, Inc.
ª As per IEC 60296, ed. 4, 2012, this product contains no undeclared additives.

You might also like