BGY67A

200 MHz, 24 dB gain reverse amplifier

Rev. 04 — 14 March 2005 Product data sheet

1. Product profile

1.1 General description

Hybrid high dynamic range amplifier module in a SOT115J package operating at a voltage
supply of 24 V (DC).

CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.

MSC895

1.2 Features
■ Excellent linearity
■ Extremely low noise
■ Silicon nitride passivation
■ Rugged construction
■ TiPtAu metallized crystals ensure optimal reliability

1.3 Applications
■ Reverse amplifier in two-way CATV systems in the 5 MHz to 200 MHz frequency range

1.4 Quick reference data

Table 1: Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
Gp power gain f = 10 MHz 23.5 - 24.5 dB
Itot total current consumption (DC) [1] - 215 230 mA

[1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
Philips Semiconductors BGY67A
200 MHz, 24 dB gain reverse amplifier

2. Pinning information
Table 2: Pinning
Pin Description Simplified outline Symbol
1 input
2 common 5
1 3 5 7 9
1 9
3 common
5 +VB
2 3 7 8
7 common sym095
8 common
9 output

3. Ordering information
Table 3: Ordering information
Type Package
number Name Description Version
BGY67A - rectangular single-ended package; aluminium flange; 2 vertical SOT115J
mounting holes; 2 × 6-32 UNC and 2 extra horizontal mounting
holes; 7 gold-plated in-line leads

4. Limiting values
Table 4: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Vi RF input voltage - 65 dBmV
Tstg storage temperature −40 +100 °C
Tmb mounting base temperature −20 +90 °C

9397 750 14755 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 04 — 14 March 2005 2 of 7

Philips Semiconductors BGY67A
200 MHz, 24 dB gain reverse amplifier

5. Characteristics
Table 5: Characteristics
Bandwidth 5 MHz to 200 MHz; VB = 24 V; Tmb = 30 °C; ZS = ZL = 75 Ω; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Gp power gain f = 10 MHz 23.5 - 24.5 dB
SL slope cable equivalent f = 5 MHz to 200 MHz −0.2 - +0.5 dB
FL flatness of frequency response f = 5 MHz to 200 MHz - - ±0.2 dB
s11 input return losses f = 5 MHz to 200 MHz 20 - - dB
s22 output return losses f = 5 MHz to 200 MHz 20 - - dB
CTB composite triple beat 22 channels flat; Vo = 50 dBmV; - - −67 dB
measured at 175.25 MHz
Xmod cross modulation 22 channels flat; Vo = 50 dBmV; - - −59 dB
measured at 55.25 MHz
d2 second order distortion Vo = 50 dBmV [1] - - −67 dB
Vo output voltage dim = −60 dB [2] 67 - - dBmV
[3] 64 - - dBmV
F noise figure f = 200 MHz - - 5.5 dB
Itot total current consumption (DC) [4] - 215 230 mA

[1] fp = 83.25 MHz; Vp = 50 dBmV; fq = 109.25 MHz; Vq = 50 dBmV; measured at fp + fq = 192.5 MHz.
[2] Measured according to DIN45004B;
fp = 35.25 MHz; Vo = Vp; fq = 42.25 MHz; Vq = Vo − 6 dB; fr = 44.25 MHz; Vr = Vo − 6 dB; measured at fp + fq − fr = 33.25 MHz.
[3] Measured according to DIN45004B;
fp = 187.25 MHz; Vo = Vp; fq = 194.25 MHz; Vq = Vo − 6 dB; fr = 196.25 MHz; Vr = Vo − 6 dB; measured at fp + fq − fr = 185.25 MHz.
[4] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.

9397 750 14755 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 04 — 14 March 2005 3 of 7

Philips Semiconductors BGY67A
200 MHz, 24 dB gain reverse amplifier

6. Package outline

Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;

2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J

D
E Z p

A2

1 2 3 5 7 8 9
A
L
F

W e b w M
c
e1
d
U2 Q q2 y M B
B q1 x M B

y M B
p

U1 q

0 5 10 mm
scale

DIMENSIONS (mm are the original dimensions)

A A2 D d E L Q Z
UNIT b c e e1 F p q q1 q2 S U1 U2 W w x y
max. max. max. max. max. min. max. max.
0.51 4.15
mm 20.8 9.1 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7 0.1 3.8
0.38 3.85 44.25 7.8 UNC

OUTLINE REFERENCES EUROPEAN

ISSUE DATE
VERSION IEC JEDEC JEITA PROJECTION

99-02-06
SOT115J
04-02-04

Fig 1. Package outline SOT115J

9397 750 14755 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 04 — 14 March 2005 4 of 7

Philips Semiconductors BGY67A
200 MHz, 24 dB gain reverse amplifier

7. Revision history
Table 6: Revision history
Document ID Release date Data sheet status Change notice Doc. number Supersedes
BGY67A_4 20050314 Product data sheet - 9397 750 14755 BGY67A_3
Modifications: • The format of this data sheet has been redesigned to comply with the new presentation and
information standard of Philips Semiconductors.
BGY67A_3 20011018 Product specification - 9397 750 08801 BGY67A_2
BGY67A_2 19970409 Product specification - 9397 750 02104 BGY67A_1

9397 750 14755 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 04 — 14 March 2005 5 of 7

Philips Semiconductors BGY67A
200 MHz, 24 dB gain reverse amplifier

8. Data sheet status

Level Data sheet status [1] Product status [2] [3] Definition
I Objective data Development This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).

[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.

9. Definitions 10. Disclaimers

Short-form specification — The data in a short-form specification is Life support — These products are not designed for use in life support
extracted from a full data sheet with the same type number and title. For appliances, devices, or systems where malfunction of these products can
detailed information see the relevant data sheet or data handbook. reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
Limiting values definition — Limiting values given are in accordance with
at their own risk and agree to fully indemnify Philips Semiconductors for any
the Absolute Maximum Rating System (IEC 60134). Stress above one or
damages resulting from such application.
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any Right to make changes — Philips Semiconductors reserves the right to
other conditions above those given in the Characteristics sections of the make changes in the products - including circuits, standard cells, and/or
specification is not implied. Exposure to limiting values for extended periods software - described or contained herein in order to improve design and/or
may affect device reliability. performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Application information — Applications that are described herein for any
Change Notification (CPCN). Philips Semiconductors assumes no
of these products are for illustrative purposes only. Philips Semiconductors
responsibility or liability for the use of any of these products, conveys no
make no representation or warranty that such applications will be suitable for
license or title under any patent, copyright, or mask work right to these
the specified use without further testing or modification.
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.

11. Contact information

For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]

9397 750 14755 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 04 — 14 March 2005 6 of 7

Philips Semiconductors BGY67A
200 MHz, 24 dB gain reverse amplifier

12. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . 6
9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11 Contact information . . . . . . . . . . . . . . . . . . . . . 6

© Koninklijke Philips Electronics N.V. 2005

All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 14 March 2005
Document number: 9397 750 14755
Published in The Netherlands