Scribd
Upload
47 views

Power Plug and Cord Warning: Downloaded From Manuals Search Engine

1) Securely connect the power plug to the product and do not allow the cord to be stepped on, pinched, or damaged which could lead to overheating and fire risk. 2) Check for dust buildup around the power plug and wall outlet and remove any dust to prevent fire. 3) When unplugging the power cord, grasp the plug and not the cable to avoid breaking the cable and risks of fire and electric shock.

Uploaded by

woozykat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Power Plug and Cord Warning: Downloaded From Manuals Search Engine

1) Securely connect the power plug to the product and do not allow the cord to be stepped on, pinched, or damaged which could lead to overheating and fire risk. 2) Check for dust buildup around the power plug and wall outlet and remove any dust to prevent fire. 3) When unplugging the power cord, grasp the plug and not the cable to avoid breaking the cable and risks of fire and electric shock.

Uploaded by

woozykat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAFETY AND IMPORTANT WARNING ITEMS

Power Plug and Cord

WARNING
• When using the power cord set (inlet type) that came with
this product, make sure the connector is securely inserted
in the inlet of the product.
When securing measure is provided, secure the cord with
the fixture properly.
If the power cord (inlet type) is not connected to the prod-
uct securely, a contact problem may lead to increased
resistance, overheating, and risk of fire.

• Check whether the power cord is not stepped on or


pinched by a table and so on.
Overheating may occur there, leading to a risk of fire.

• Check whether the power cord is damaged. Check


whether the sheath is damaged.
If the power plug, cord, or sheath is damaged, replace
with a new power cord (with plug and connector on each
end) specified by KMBT. Using the damaged power cord
may result in fire or electric shock.

• Do not bundle or tie the power cord.


Overheating may occur there, leading to a risk of fire.

• Check whether dust is collected around the power plug


and wall outlet.
Using the power plug and wall outlet without removing
dust may result in fire.

• Do not insert the power plug into the wall outlet with a wet
hand.
The risk of electric shock exists.

• When unplugging the power cord, grasp the plug, not the
cable.
The cable may be broken, leading to a risk of fire and
electric shock.

S-5
Downloaded from www.Manualslib.com manuals search engine

You might also like