Scribd
Upload
58 views

User Manual Automated Audio Guide: 1. Earphone Jack, Stereo, 3.5 MM 2. Triggering Module

1. The document is a user manual for an automated audio guide that provides instructions for its various features and functions. 2. It describes 10 key components of the audio guide: earphone jack, triggering module, charging indicator, inbuilt speaker, mono color OLED screen, keypad, power/stop button, battery door, reset button, and uploading connector. 3. It also provides brief explanations of the purpose and proper use of each component to help users operate and troubleshoot the audio guide.

Uploaded by

Golescu Marian
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

User Manual Automated Audio Guide: 1. Earphone Jack, Stereo, 3.5 MM 2. Triggering Module

1. The document is a user manual for an automated audio guide that provides instructions for its various features and functions. 2. It describes 10 key components of the audio guide: earphone jack, triggering module, charging indicator, inbuilt speaker, mono color OLED screen, keypad, power/stop button, battery door, reset button, and uploading connector. 3. It also provides brief explanations of the purpose and proper use of each component to help users operate and troubleshoot the audio guide.

Uploaded by

Golescu Marian
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

User Manual Automated Audio Guide

2 2
3 3
1. Earphone jack
4 4
2. Triggering module
1 3. Charging indicator
5 5
4. Inbuilt speaker
6 6 8 5. Mono color OLED screen
1 2 3 (Blue)
4 5 6
7 8 9 6. Keypad
0
7 7. Power/Stop button
7
8. Battery door
9. Reset
9 10. Uploading connector

(Keypad Guide) (Linear Guide)

1. Earphone jack, stereo, 3.5 mm


1 or 2 headphones are valid for more than 1 user.
10
2. Triggering module
Inbuilt IR triggering module.
8. Battery door
3. Charging indicator
If the inbuilt battery is defective, open the battery
Red/Green LED indicator stand s for charging/ door for replacement.
fully charged status.
Glittery red LED indicator means potentially 9. Reset
defective battery inside. Please replace the battery. Press reset to shut off and reset the system.
4. Inbuilt speaker 10. Uploading connector
Users can listen to audio commentaries through This port will be connected with computers/uploaders
the inbuilt speaker. However, this function will /chargers for either uploading or recharging.
be disabled when the player connects with
headphones. Uploading mode:
When an audioguide is connected with a computer,
5. Mono color OLED screen (Blue)
an uploading icon will appear.
Battery status, volumes, and playing tracks/
progress will display on the OLED screen. Recharging mode:
When you press "stop" button, the audioguide changes
6. Keypad
to recharging mode from uploading mode.
Numeric buttons for audio tracks
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Play & Pause Volume up Notice: The changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Fast forward, next track Volume down IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result in the device
Rewind, previous track exceeding the RF exposure requirements and void user’s authority to operate the device.
FCC INFORMATION
The Federal Communication Commission Radio Frequency Interference Statement includes the following
NOTE: 2 auxiliary buttons, and , are designed for paragraph:
further information and will be updated by organizers. The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant
to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7. Power/Stop button This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communication.
To power on - press power button for about 1 second. However, there is no grantee that interference will not occur in a particular installation. If this equipment
dose cause harmful interference to radio or television reception, which can be determined by turning the
To power off - press power button for about 2 equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
seconds till “OFF” shows up. -- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
To stop or redial codes of an audio commentary, -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
simply press stop button and dial new codes again.
※ Specifications are subject to change without prior notice.

07/14

You might also like