‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬

‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬

  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Table of Contents

 
No. Section Page No.
 
  1 Soil Tests 3
 
  2 Aggregate Tests 7
 
3 Concrete Tests 11
 
  4 Masonry Blocks and Paving Units Tests 15
 
  5 Cementitious Materials Tests 17
 
6 Road and Pavement Tests 20
 
Approved Labs for Asphalt Mix Preparation and
  7 27
Verification
 
  8 Steel Tests 28
  9 Geotechnical Tests 29
 
  10 Environmental Tests 32
 
11 Non Destructive Tests 40
 
  12 Geotextile & Waterproofing Tests 42
 
  13 Leakage Testing of Buildings 45
 
14 Paints &varnishes Tests 47
 
  15 Calibration labs 50
 

1 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                                                                     
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

No. Section Page No.

16 Approved Site Laboratories 61

Approved Abroad labs

108
Lonestar alpha laboratories –Oman
17 110
Turkish Standards Institution Laboratories (TSE)- Turkey
163
TSE Sojuztest calibration Laboratories- Turkey
174
Approved Laboratories Contact Details
175
18 Local Laboratories
Calibration laboratories 176
Abroad Laboratories

2 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                                                                     
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

1. Soil Tests
Laboratory

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Gulf Lab

Teyseer
Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Reducing Samples to Testing
1.1
Size
ASTM C702 √ √ √ √ √ √ - √ √ √  √ - - √ √ √ √
Determination of Moisture
1.2
Content
ASTM D2216 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √

1.3 Particle Size Distribution ASTM D6913 - √ √ √ √ √ - √ √ √ √ √ √ √ √ - √

Materials Finer than No. 200

1.4
(0.075mm) Sieve
ASTM D1140 √ √ √ √ √ √ - √ √ √ √ - √ √ √ - √
Liquid Limit, Plastic Limit and
1.5
Plasticity Index of Soil
ASTM D4318 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ √
Lab Compaction Test using
1.6
Modified Effort
ASTM D1557 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √
Correction of Density and
1.7
Water Content for Soils
ASTM D4718 - √ √ √ √ √ - √ √ √ √ √ √ √ √ - √*

1.8 Field Density (Sand Cone) ASTM D1556 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √*

1.9 Field Density (Nuclear) ASTM D6938 - √ √ √ √ √ - √ √ - - √ √ √ √ - -

In Place Moisture Content
1.10
(Calcium Carbide Tester)
ASTM D4944 √ √ - √ √ - - √ √ √ √ - - √ √ - √*

3 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                       QSD/LL/S/V12/2018 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Soil Tests (Cont.)  

Laboratory

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Gulf Lab

Teyseer
Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Determination of California
1.11
Bearing Ratio (CBR)
ASTM D1883 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √
In Place California Bearing
1.12
Ratio (CBR)
ASTM D4429 √ √ - √ - √ - √ √ √ √ - - √ √ - -

1.13 Sand Equivalent Value ASTM D2419 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - √

4 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                       QSD/LL/S/V12/2018 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Soil Tests (Cont.)  

Laboratory

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Gulf Lab

Teyseer
Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
BS and BS EN TESTS

Determination of Moisture BS 1377

1.14
Content (Oven Drying) Part 2: Sec. 3.2 √ √ √ √  √ √ √  √ √ √  √ √ √ √ √ - -
Determination of Liquid Limit BS 1377
1.15
(Cone Penetrometer) Part 2: Sec. 4.3 √ √ √ √ √ √ √ √ √ √ √ √ √  √ √ - -
Determination of Liquid Limit BS 1377
1.16
(Casagrande Method) Part 2: Sec. 4.5 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - -

Determination of Plastic Limit BS 1377

1.17
and Plasticity Index Part 2: Sec. 5 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -

Particle Size Distribution BS 1377

1.18
(Wet Sieving Method) Part 2: Sec. 9.2 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -

Particle Size Distribution BS 1377

1.19
(Dry Sieving Method) Part 2: Sec. 9.3 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -
BS 1377
Dry Density/Moisture Content
1.20
Relationship
Part 4 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -
:Sec.3.5/3.6
Determination of California BS 1377
1.21
Bearing Ratio (CBR) Part4: Sec. 7 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -
In-Situ Density Test
BS 1377
1.22 (Sand Replacement Method -
Part 9: Sec. 2.1 - √ √ √ √ √ - √ √ - - √ √ √ √ - -
Small Pouring Cylinder)

5 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                       QSD/LL/S/V12/2018 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Soil Tests (Cont.)  

Laboratory
Standard

ELEMENT

Tech Lab
No. Test

BATLABS
Gulf Lab

Ashghal
Teyseer
Pioneer

QGEC
Fugro
ACES
ACTS

QEL

DTL

CTL
JEL

QIL
ITL
In-Situ Density Test
BS 1377
1.23 (Sand Replacement Method –
Part 9: Sec. 2.2 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -
Large Pouring Cylinder)
In-Situ Density Test BS 1377
1.24
(Nuclear Gauge Method) Part 9: Sec. 2.5 √ √ √ √ √ √ √ √ √ - - - √  √ √ - -
Determination of Organic BS 1377
1.25
Matter Content Part 3: Sec. 3
√ √ √ √ √ √ - √ √ √ √ √ √  √ √ - -
Determination of Water Soluble BS 1377
1.26
Chloride Content Part 3: Sec. 7.2
√  √ √ √ √ √ - √ √ √ √ √ √  √ √ - -
Determination of Acid Soluble BS 1377
1.27
Chloride Content Part 3: Sec. 7.3/5.5
√  √ √ √ √ √ - √ √ √ √ √ √ √ √ - -

Determination of Water Soluble BS 1377

1.28
Sulphate Content Part 3: Sec. 5.3/5.5 √  √ √ √ √ √ - √ √ √ √ √ √  √ √ - -

Determination of Acid Soluble BS 1377 √ √

1.29
Sulphate Content Part 3: Sec. 5.2 √  √ √ √ √ √ - √ √ √ √ √ √  √ √ - -
BS EN 933
1.30 Sand Equivalent Value
Part 8 √ √ √ √ √ √ - √ √ - - √ -  √ √ - -
Method of Test for Cement BS 1924
1.31
Stabilized Materials Part 2 √ √ - √ - - - √ √ √ - - - √ √ - -
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -

6 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                       QSD/LL/S/V12/2018 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

2. Aggregate Tests
Laboratory

ELEMENT

Tech Lab

BATLABS
Gulf Lab

Ashghal
No. Test Standard

Teyseer
Pioneer

QGEC
Fugro
ACES
ACTS

QEL

DTL

CTL
JEL

QIL
ITL
ASTM / AASHTO TESTS

2.1 Sampling of Aggregates ASTM D75 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ √

2.2 Reducing Samples to Testing Size ASTM C702 √ √ √ √ √ √ - √ √ √ √ - √ √ √ √ √
2.3 Particle Size Distribution ASTM C136 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √

2.4 Material Finer than 0.075 mm ASTM C117 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Determination of Specific Gravity and
2.5
Water Absorption of Fine Aggregate
ASTM C128 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ - √
Determination of Specific Gravity and
2.6
Water Absorption of Coarse Aggregate
ASTM C127 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ - √

2.7 Clay Lumps and Friable Particles ASTM C142 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ - √

2.8 Lightweight Particles ASTM C123 √  √ √ √ √ √ - √ √ √ √ √ √  √ √ - -
2.9 Organic Impurities for Fine Aggregates ASTM C40 √  √ √ √ √ √ - √ √ √ √ √ √  √ √ - √
2.10 Flat and Elongated Particles ASTM D4791 √ √ √ √ √ √ - √ √ √ - √ √ √ √ - √

2.11 Los Angeles Abrasion ASTM C131 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - √

7 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AG/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Aggregate Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
Gulf Lab

Ashghal
No. Test Standard

BATLABS
Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
2.12 Los Angeles Abrasion ASTM C535 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - √

2.13 Magnesium Sulphate Soundness ASTM C88 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √

2.14 Percentage of Fractured Particles ASTM D5821 √ √ √ √ √ √ - √ √ √ √ √ - √ √ - √
2.15 Sieve Analysis of Mineral Filler ASTM D546 √ √ - √ √ √ - √ √ √ - - - - √ - √
Uncompacted Void Content of Fine
2.16
Aggregate
AASHTO T304 √ √ - √ - - - √ √ √ √ - - √ √ - -
 
 
 
 
 
 
 
 
 
 
 
 
 

8 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AG/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Aggregate Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS

Ashghal
No. Test Standard

Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

QEL
DTL

CTL
JEL

QIL
ITL
BS and BS EN TESTS
BS 812
2.17 Sampling of Aggregates (From Heaps)
Part 102 √ √ √ √ √ √ √ √ √ - - √ √ √ √ - -
Determination of Moisture Content BS 812
2.18
(Oven Drying) Part 109: Sec.6 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - -
Determination of Particle Density and BS EN 1097
2.19
Water Absorption Part 6 √ √ - √ √ √ - √ √ √ - √ - √ √ √ -
Particle Density and Water Absorption BS 812
2.20
(All larger than 10mm aggregate) Part 2–5.3 √ √ - √ √ √ - √ √ √ - - - - √ - -
Particle Density and Water Absorption BS 812
2.21
(5-40mm aggregate) Part 2–5.4 √ √ - √ √ √ √ √ √ √ - - √ - √ - -
Particle Density and Water Absorption BS 812
2.22
(10mm aggregate and smaller) Part 2–5.5 √ √ - √ √ √ √ √ √ √ - - - - √ - -
BS EN 933
2.23 Particle Size Distribution
Part 1 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ -
BS 812
2.24 Particle Size Distribution (Wet)
Part 103.1-7.2 √ √ √ √ √ √ √ √ √ √ - √ √  √ √ - -
BS 812
2.25 Particle Size Distribution (Dry)
Part 103.1-7.3 √ √ √ √ √ √ √ √ √ √ - √ √  √ √ - -
BS EN 933
2.26 Material Finer than 0.075 mm
Part 1 √ √ √ √ √ √ - √ √ √ √ - √ - √ - -
BS EN 933
2.27 Material Finer than 0.063 mm
Part 1 √ √ √ √ √ √ √ √ √ √ √ √ √  - √ √ -
BS EN 933
2.28 Determination of Shell Content
Part 7
√  √ - √ √ √ √ √ √ √ - √ -  √ √ - -
9 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AG/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Aggregate Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
Gulf Lab

Ashghal
No. Test Standard

BATLABS
Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
BS EN 933
2.29 Flakiness Index
Part 3
√  √ √ √ √ - √ √ √ √ √ √ √ √ √ - -
BS 812
2.30 Flakiness Index
Part 105.1 √ √ √ √ √ √ √ √ √ √ - √ √ √ √ - -
BS EN 933
2.31 Elongation (Shape) Index
Part 4 √ √ √ √ √ - √ √ √ √ - √ √ - √ - -
BS 812
2.32 Elongation Index
Part 105.2 √ √ √ √ √ √ √ √ √ √ - √ √ √ √ - -
Determination of Aggregate BS 812
2.33
Crushing Value Part 110 √ √ √ √ √ √ √ √ √ √ √ √ √  √ √ - √
Determination of Ten Percent BS 812
2.34
Value Part 111 √ √ √ √ √ √ √ √ √ √ - √ √  √ √ - -
Determination of Aggregate BS 812
2.35
Impact Value Part 112 √ √ √ √ √ √ √ √ √ √ - - -  √ √ - -
Determination of Acid Soluble BS EN 1744
2.36
Chloride Content Part 5 √ √ √ √ √ √ - √ √ √ - √ √  √ √ - -
Determination of Water Soluble BS 812
2.37
Chloride Content Part 117 √ √ √ √ √ √ - √ √ - √ √ √ √ √ - -
Determination of Chloride Content BS 812
2.38
(Acid Extract) Part 117-App. C √ √ - √ - - - √ √ - √ √ √ √ √ - -
BS 812
2.39 Determination of Sulphate Content
Part 118 √ √ √ √ - √ - √ √ - √ √ √ √ √ - -
Determination of Acid Soluble BS EN 1744
2.40
Sulphate Content Part 1: Sec 12 √ √ √ √ √ √ - √ √ √ - √ √ √ √ - -
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬ - :‫ﻣﻼﺣﻅﺎﺕ‬
.‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩ‬ -
10 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AG/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

3. Concrete Tests
Laboratory

ELEMENT

Tech Lab
Gulf Lab
No. Test Standard

Ashghal
BATLABS
Teyseer
Pioneer

JEL
QGEC
Fugro
ACES

ACTS

QEL
DTL

CTL
QIL
ITL
ASTM TESTS
Making and Curing of Concrete Tests
3.1
Specimen
ASTM C31 √ √ √ √ √ - - √ - √ √ √ √ - √ √ -

3.2 Sampling of Fresh Concrete ASTM C172 √ √ √ √ √ √ - √ √ - √ √ √ - √ √ -

3.3 Test for Temperature of Fresh Concrete ASTM C1064 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ √ -
3.4 Slump Test ASTM C143 √ √ √ √ √ √ - √ √ - √ √ √ - √ √ -
Compressive Strength of Concrete
3.5
Cylindrical Specimens
ASTM C39 √  √ √ √ √ √ - √ √ √ √ - √  √ √ √ -
Capping of Cylindrical Concrete
3.6
Specimen
ASTM C617 √  √ √ √ √ √ - √ - √ - √ -  √ - √ -
Testing Concrete Cylinders Using
3.7
Unbonded Caps
ASTM C1231 - √ √ - - - - √ - - - - -  - - √ -
Obtaining and Testing of Drilled Cores
3.8
and Sawed Beams
ASTM C42 √ √ √ √ √ √ - √ √ √ √ √ -  - √ - -

3.9 Water Soluble Chloride in Concrete ASTM C1218 - √ - √ - - - √ √ - - √ -  - - - -

3.10 Acid Soluble Chloride in Concrete ASTM C1152 - √ - √ - - - √ - - - √ -  - - - -

3.11 Resistance to Chloride Ion Penetration ASTM C1202 √ √ √ √ √ √ - √ √ √ √ - √  √ √ - -
Air Content Test for Fresh Concrete by
3.12
Pressure Method
ASTM C231 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ √ -
11 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CO/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Concrete Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS
No. Test Standard

Ashghal
Teyseer
Pioneer

JEL
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
QIL
ITL
Air Content Test for Fresh Concrete
3.13
by Volumetric Method
ASTM C173 - - √ - - - - - - - - - -  - - - -
Density Determination for Fresh
3.14
Concrete
ASTM C138 √ √ √ √ √ - - √ √ √ √ √ √  √ √ √ -
3.15 Sampling of Shotcrete ASTM C1385 - √ √ √ - - - √ - - - - -  - - - -
Pullout Strength of Hardened
3.16
Concrete
ASTM C900 - √ - - √ - - √ - - √ - -  - √ - -
Density Determination of Pervious
3.17
Concrete
ASTM C1688 - √ - - - - - √ - - - - -  - - - -
Infiltration Test for In place Pervious
3.18
Concrete
ASTM C1701 - √ - - - - - √ - - - - -  - - - -
Slump Flow Test for Self-
3.19
Consolidated Concrete
ASTM C1611 - √ √ √ √ - - - √ - - - -  - √ √ -
Passing Ability for Self-
3.20
Consolidating Concrete by J-Ring
ASTM C1621 - √ √ - - - - - √ - - - -  - - - -

12 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CO/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Concrete Tests (Cont.) 

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS

Ashghal
No. Test Standard

Teyseer
Pioneer

JEL
QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
QIL
ITL
BS and BS EN TESTS
BS EN 12350
3.21 Sampling of Fresh Concrete
Part 1 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ -
Making and Curing of Specimen for BS EN 12390
3.22
Strength Test Part 2 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ √ √
BS EN 12350
3.23 Slump Test
Part 2 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ -
BS EN 12350
3.24 Flow Table Test
Part 5 √ √ √ √ √ √ - √ √ - - - √ - √ √ -
BS EN 12390
3.25 Shape and Dimensions of Specimen
Part 1 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ - √
Compressive Strength of Concrete BS EN 12390
3.26
Specimens Part 3 √ √ √ √ √ √ √ √ √ √ √ √ √  √ √ √ √
BS EN 12390
3.27 Density of Hardened Concrete
Part 7 √ √ √ √ √ √ √ √ √ √ √ √ √  √ √ - √
Obtaining and Testing of Drilled BS EN 12504
3.28
Cores Part 1 √ √ √ √ √ - √ √ √ √ √ √ √ √ √ - -
BS EN 12390
3.29 Water Penetration Test
Part 8 √ √ √ √ √ - - √ √ √ √ - √  √ √ - -
BS 1881
3.30 Water Absorption Test
Part 122 √ √ √ √ √ √ - √ √ √ √ √ √  √ √ - -
BS 1881
3.31 Initial Surface Absorption (ISAT)
Part 208 √ √ √ √ √ √ - √ √ √ - √ √  √ √ - -
 

13 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CO/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Gulf Lab

BATLABS

Ashghal
Teyseer
Pioneer

JEL
QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
QIL
ITL
3.32 Chloride Penetration Test NT Build 492 √ √ √ √ √ √ - √ √ √ - - √  √ √  - -
BS 1881
3.33 Acid Soluble Chloride in Concrete Part 124 Sec. √ √ √ √ √ √ - √ √ √ √ √ √  √ √  - -
10.2
BS 1881
3.34 Acid Soluble Sulphate in Concrete Part 124 Sec. √ √ √ √ √ √ - √ √ √ √ √ √  √ √  - -
10.3
V-Funnel Test for Self-Compacting BS EN 12350
3.35
Concrete Part 9 √ √ √ - - - - - √ - - - -  - √  - -
L-Box Test for Self-Compacting BS EN 12350
3.36
Concrete Part 10 √ √ √ - - - - - √ - - - -  - √  - -
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
 (
  .‫‐)*√ ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬

14 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CO/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

4. Masonry Blocks and Paving Units Tests

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Compressive Strength of Clay BS EN 771
4.1
Masonry Blocks Part 1 √ √ √ - √ √ - - - √ √ - -  - √ - -
Water Absorption for Clay Masonry BS EN 771
4.2
Blocks Part 1 √ √ √ - √ - - - - - - √ -  - √ - -
Compressive Strength of Concrete BS 6073
4.3
Masonry Blocks Part 1 - √ - √ √ √ - √ √ - - √ √ - √ - -
Compressive Strength of Concrete BS EN 772
4.4
Masonry Blocks Part 1 √ √ √ - √ √ √ √ √ √ - √ -  - √ - -
Water Absorption for Masonry EN 771
4.5
Blocks Part 3 √ √ √ √ √ √ - √ - √ √ - -  √ √ - -
Measurement of Dimensions of BS EN 1340
4.6
Kerbs Annex C √ √ √ - √ √ - √ √ - - √ -  √ √ - -
BS EN 1340
4.7 Water Absorption for Kerbs
Annex E √ √ √ √ √ √ - √ √ - - √ -  √ √ - -
BS EN 1340
4.8 Transverse Strength of Kerbs
Annex F √ √ √ - √ √ - √ √ - - √ -  - √ - -
Water Absorption for Paving BS EN 1338
4.9
Blocks Annex E √ √ √ √ √ √ - √ √ - √ √ -  √ √ - -
BS EN 1338
4.10 Tensile Strength of Paving Blocks
Annex F - √ √ - √ - - √ √ - √ - -  - √ - -
Transverse Strength of Concrete BS EN 1339
4.11
Paving Flags/Slabs Appendix F √ √ √ - √ - - √ √ - √ √ -  - √ - -

15 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                           QSD/LL/MA/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Masonry Blocks and Paving Units Tests (Cont.) 

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Water Absorption for Concrete BS EN 1339
4.12
Paving Flags/Slabs Appendix E √ √ √ - √ - - √ √ - √ √ -  - √ - -
Measurement of Dimensions of BS 6717
4.13
Paving Blocks Annex B √ √ √ √ √ √ - √ - - √ √ -  √ √ - -
BS 6717
4.14 Tensile Strength of Paving Blocks
Annex E - √ √ √ √ √ √ √ √ - √ √ - √ √ - -

4.15 Water Absorption for Interlocks ASTM C140 √ √ √ - √ √ - √ √ - - √ √  - √ - -

Compressive Strength and water
BS EN 13748
4.16 Absorption of Terrazzo Tiles
Part 1-Sec.5.5/5.8 - √ √ - √ - - - √ - √ - -  - - - -
(Internal Use)
 
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 

16 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                           QSD/LL/MA/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

5. Cementitious Materials Tests

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

BATLABS
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Taking and Preparing Samples BS EN 196
5.1
of Cement Part 7 - √ √ √ √ - - √ √ - - - √ - √ - -

5.2 Method of Sampling of Cement ASTM C183 - √ √ √ √ - - √ - - - - √ - √ - -

Determination of Strength of BS EN 196
5.3
Cement Part 1 √ √ √ √ √ - - √ √ - - √ - - √ - -
Compressive Strength of
5.4
Cement Mortars
ASTM C349 - √ √ √ √ - - √ - - - - - - √ - -
BS EN 196
5.5 Calcium Oxide Content
Part 2–Cl. 13.14 √ √ √ √ √ - - √ √ - - √ √ - √ - -
BS EN 196
5.6 Magnesium Oxide Content
Part 2–Cl. 13.15 √ √ √ √ √ - - √ √ - - √ √ - √ - -
BS EN 196
5.7 Aluminum Oxide Content
Part 2–Cl. 13.11 √ √ √ √ √ - - √ √ - - √ √ - √ - -
BS EN 196
5.8 Ferric Oxide Content
Part 2–Cl. 13.10 √ √ √ √ √ - - √ √ - - √ √ - √ - -
BS EN 196
5.9 Loss on Ignition
Part 2–Cl. 7 √ √ √ √ √ - - √ √ - - √ √ - √ - -
BS EN 196
5.10 Impure Silica Content
Part 2–Cl. 13.2&3 - √ √ - √ - - √ - - - - √ - - - -
BS EN 196
5.11 Pure Silica Content
Part 2–Cl. 13.6 √ √ - √ √ - - √ - - - - √ - - - -

17 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CE/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Cementitious Materials Tests (Cont.)

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

BATLABS
QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
BS EN 196
5.12 Total Silica Content
Part 2–Cl. 13.9 √ √ - √ √ - - √ √ - - √ - - - - -
BS EN 196
5.13 Alkalies Content
Part 2–Cl. 17 - √* - √ √ - - √ √ - - √ - - - - -
Determination of Setting Times BS EN 196
5.14
of Cement Part 3 √ √ √ √ √ - - √ √ - - √ √ - √ - -
Determination of Soundness of BS EN 196
5.15
Cement Part 3 √ √ √ √ √ - - √ √ - - √ √ - √ - -

5.16 Setting Time by Vicat Needle ASTM C191 √ √ √ √ √ √ - √ √ - - - √ - √ √ -

5.17 Normal Consistency of Cement ASTM C187 √ √ √ √ - √ - √ √ - - - √ - √ - -

Pozzolanicity Test of Pozzolanic BS EN 196
5.18
Cement Part 5 - - - - - - - √ - - - - - - - - -
BS EN 196
5.19 Chloride Content
Part 21–Cl. 4 √ √ √ √ √ - - √ √ - - - - - - - -
BS EN 196
5.20 Carbon Dioxide Content
Part 21 - - - - - - - √ - - - - - - - - -
BS EN 196
5.21 Fineness Test of Cement
Part 6 √ √ √ √ √ - - √ √ - - √ √ - √ - -
Compressive strength for
5.22 Ground Granulated Blast ASTM C989 - √ √ √ - - - √ - - - - - - √ - -
Furnace Slag
 
18 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CE/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

 
Cementitious Materials Tests (Cont.) 
Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
5.23 Pozzolanic Activity Test ASTM C1240 - - √ √ √ - - √ - - - √ - - √ - -
Characterization of Fly Ash for
5.24
Potential Uses
ASTM D5759 - √ - - - - - √ - - - - - - - - -

5.25 Chemical Analysis of Fly Ash ASTM C311 - - √ √ - - - √ √ - - √ - - - - -

5.26 Length Change of Cement Mortars ASTM C1012 - √ √ - - - - √ - - - - - - √ - -

 
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 
 
 
 
 

19 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/CE/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

6. Road and Pavement Tests

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
ASTM / AASHTO TESTS – BINDERS
6.1 Sampling of Binders ASTM D140 - √ √ - √ - - √ √ √ √ √ √ √ √ - √
6.2 Distillation of Cutback Asphalt ASTM D402 - √ - - √ √ - - √ √ √ - - - √ - -
Application Rate of Bituminous
6.3
Distributors
ASTM D2995 √ √ √ √ √ √ - √ √ √ √ √ - √ √ - -
6.4 Determination of Density of Bitumen ASTM D70 √ √ - - √ √ - √ √ √ - √ √ √ √ - √
6.5 Penetration of Bituminous Materials ASTM D5 √ √ √ - √ √ - √ √ √ √ √ √ √ √ - √
Determination of Softening Point (Ring
6.6
and Ball Method)
ASTM D36 √ √ √ - √ √ - √ √ √ √ √ √ √ √ - √
6.7 Flash Point, Cleveland Open Cup ASTM D92 √ √ √ - √ - - √ √ √ √ √ - - √ - √
6.8 Ductility of Bituminous Materials ASTM D113 √ √ - - √ - - √ √ √ √ - - - √ - √
6.9 Solubility in Trichloroethylene ASTM D2042 √ √ - - √ - - - √ √ - - - - √ - √
6.10 Loss on Heating ASTM D6 - √ - - √ - - √ √ √ - - - - √ - √
6.11 Determination of Viscosity of Asphalt ASTM D2171 - - - - - - - √ √ - - √ - - - - -
Viscosity Determination using ASTM D4402
6.12
Rotational Viscometer (RV) AASHTO T316 √ √ √ - √ - - - √ √ √ - - - √ - √
Flexural Creep Stiffness using the ASTM D6648
6.13
Bending Beam Rheometer (BBR) AASHTO T313 √ √ √ - √ - - - √ √ √ - - - - - √
19 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Road and Pavement Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Determining the Rheological Properties ASTM D7175
6.14
using Dynamic Shear Rheometer (DSR) AASHTO T315 √ √ √ - √ - - - √ √ √ - -  - - - √
Accelerated Aging of Asphalt Binder ASTM D6521
6.15
Using a Pressurized Aging Vessel (PAV) AASHTO R28 √ √ √ - √ - - - √ √ √ - -  - - - √
Effect of Heat and Air on a Moving Film ASTM D2872
6.16
of Asphalt (Rolling Thin-Film Oven Test) AASHTO T240 √ √ √ - √ - - - √ √ √ - -  - - - √
Multiple Creep and Recovery (MSCR) ASTM D7405
6.17
using Dynamic Shear Rheometer (DSR) AASHTO TP70 √ √ √ - √ - - - √ √ √ - -  - - - √
Water in Petroleum Products and
6.18
Bituminous Materials by Distillation
ASTM D95 √ √ - - √ √ - - √ √ - - - - - - -

6.19 Separation Tendency of Polymers ASTM D7173 √ √ - - - - - - √ √ √ - - - - - -

ASTM D5546
6.20 Solubility of Binders in Toluene
AASHTO T44 - √ - - - - - - √ √ - - - - - - -
ASTM D6723
6.21 Direct Tension Test
AASHTO T314 - - - - - - - - - - - - - - - - -

20 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Road and Pavement Tests (Cont.)

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
ASTM / AASHTO TESTS – ASPHALT MIXTURES
6.22 Sampling of Bituminous Mixtures ASTM D979 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ √
Sampling Compacted Bituminous
6.23
Mixtures for Laboratory Testing
ASTM D5361 √ √ √ √ √ √ - √ √ √* √ √ √ √ √ - √*
Preparation of Specimens Using
6.24
Marshall Apparatus
ASTM D6926 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √
6.25 Bulk Specific Gravity and Density ASTM D2726 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ √
Bulk Specific Gravity and Density
6.26
Using Coated Samples
ASTM D1188 √ √ - √ √ √ - √ √ √ - - √ - √ - -
Maximum Specific Gravity and
6.27
Density
ASTM D2041 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √
Maximum Specific Gravity and
6.28
Density Using Vacuum Sealing
ASTM D6857 - √ - - - - - - √ √ - - - - - - -
6.29 Thickness of Asphalt Specimen ASTM D3549 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ √
Marshall Stability and Flow of
6.30
Bituminous Mixtures
ASTM D6927 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ √ √
Resistance to Plastic Flow Using
6.31
Marshall Apparatus (6 in. Specimen)
ASTM D5581 - √ - - √ - - √ √ - √ - - √ √ - √
Quantitative Extraction of Bitumen
6.32
from Bituminous Paving Mixtures
ASTM D2172 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √*
Asphalt Content of Hot-Mix Asphalt
6.33
by Ignition Method
ASTM D6307 √ √ - - - - - - - √ √ - - √ √ - √
Mechanical Size Analysis of
6.34
Extracted Aggregate
ASTM D5444 √ √ √ √ √ √ - √ √ √ √ √ √ √ √ - √*

21 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Road and Pavement Tests (Cont.)

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Density of Bituminous Concrete in
6.35
Place by Nuclear Methods
ASTM D2950 - √ - √ - - - √ √ - - - - √ √ - -
Sample Preparation and Density of
6.36
Specimens Using Gyratory Compactor
AASHTO T 312 - √ - - √ - - - √ √ - - - √ √ - √*
Preparation of Performance Test
6.37
Specimens Using Gyratory Compactor
AASHTO PP60 - √ - - - - - - - √ - - - - - - √*
Developing Dynamic Modulus Master
6.38
Curves Using AMPT
AASHTO PP61 - √* - - - - - - - √ - - - - - - -
Dynamic Modulus and Flow Number
6.39
for Hot Mix Asphalt (HMA)
AASHTO TP79 - √* - - - - - - - √ √ - - - - - -
Indirect Tensile (IDT) Strength of
6.40
Bituminous Mixtures
ASTM D6931 √ √ - - √ - - - √ - √ - - √ √ - √
Fatigue Life of Asphalt Subjected to
6.41
Repeated Flexural Bending
AASHTO T321 - - - - - - - - - - - - - - - - √*
Surface Frictional Properties Using
6.42
the British Pendulum Tester
ASTM E303 - √ - - - - - - √ - - - - √ √ - -
Skid Resistance of Paved Surfaces
6.43
Using a Full-Scale Tire
ASTM E274 - - - - - - - - - - - - - - - - -
Accelerated Polishing of Aggregates
6.44
Using the British Wheel
ASTM D3319 - - - - - - - - - - - - - - - - -
Computing IRI of Roads from
6.45
Longitudinal Profile Measurements
ASTM E1926 - √ √ - - - - √ √ √ - - - √ - - -
Resistance of Compacted Asphalt to
6.46
Moisture-Induced Damage
AASHTO T283 - √ - - √ - - √ √ √ - - - √ - - -

22 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Road and Pavement Tests (Cont.)

Laboratory

ELEMENT
No. Test Standard

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
BS EN 12697
6.47 Sampling of Asphalt
Part 27 √ √ √ √ √ √ √ √ √ - - √ √ √ √ - -
BS EN 12697
6.48 Preparation of Samples for Testing
Part 28 √ √ √ √ √ √ - √ √ √ - √ √ √ √ - -
Specimen Preparation by Impact BS EN 12697
6.49
Compactor Part 30 √ √ √ √ √ √ √ √ √ - - √ √ √ √ - -
BS EN 12697
6.50 Soluble Binder Content
Part 1 - √ - √ √ √ - √ √ √ √ √ √ √ √ - -
BS EN 12697
6.51 Particle Size Distribution
Part 2 √ √ √ √ √ √ √ √ √ - √ √ √ √ √ - -
BS EN 12697
6.52 Determination of Maximum Density
Part 5 √ √ √ √ √ - - √ √ - - - √ √ √ - -
BS EN 12697
6.53 Determination of Bulk Density
Part 6 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -
Determination of Void BS EN 12697
6.54
Characteristics Part 8 √ √ √ √ √ - √ √ √ √ - - √ √ √ - -
BS EN 12697
6.55 Determination of Reference Density
Part 9 - √ - √ - - - √ √ - - - -  - - - -
BS EN 12697
6.56 Temperature Measurement
Part 13 √ √ √ √ √ √ - √ √ √ - √ √ √ √ - √
Determination of Dimensions of BS EN 12697
6.57
Specimen Part 29 √ √ √ √ √ √ √ √ √ √ - √ √ √ √ - -
BS EN 12697
6.58 Marshal Test
Part 34 √ √ √ √ √ √ √ √ √ - - √ √ √ √ - -
BS EN 12697
6.59 Laboratory Mixing
Part 35 - √ - √ √ - - - √ - - - - √ - - -

23 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Road and Pavement Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS

Ashghal
No. Test Standard

Teyseer
Pioneer

QGEC
Fugro
ACES
ACTS

DTL
QEL

CTL
JEL

QIL
ITL
BS EN 12697
6.60 Determination of Thickness of Specimen
Part 36 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - -
BS EN 12697
6.61 Binder Content by Ignition
Part 39 √ √ √ √ - - - - - - √ - - √ - - -
6.62 Determination of Needle Penetration BS EN 1426 - √ - - √ √ √ √ - - √ √ √ √ √ - -
Determination of Softening Point (Ring
6.63
and Ball Method)
BS EN 1427 - √ - - √ - - √ √ - - √ √ √ √ - -
Determination of the indirect tensile BS EN 12697
6.64
strength of bituminous specimens Part 23 - √ - - - - - - - √ - - -  - - - -
Pavement Markings Tests
Binder Content of Thermoplastic BS 3262
6.65
Material Part 1–Ap. C - √ - - - - - - √ - - - -  - - - -
Softening Point (Ring and Ball Method)
6.66
of Thermoplastic Material
BS 2000-58 - √ - - - - - - √ - - - -  - - - -
Glass Bead Content of Thermoplastic BS 3262
6.67
Material Part 1–Ap. D - √ - - - - - - - - - - -  - - - -
Glass Bead Content of Thermoplastic
6.68
Material
AASHTO T250 - √ - - - - - - - - - - -  - - - -
Determination of Density of BS 3262
6.69
Thermoplastic Material Part 3–Ap. C - √ - - - - - - - - - - -  - - - -
Flash Point (Open) of Thermoplastic
6.70
Material
BS 2000-35 - √ - - - - - - - - - - -  - - - -
Flow Resistance of Thermoplastic BS 3262
6.71
Material Part 1–Ap. H - √ - - - - - - √ - - - -  - - - -
BS 3262
6.72 Combined Gradation of Material
Part 1–Ap. D - √ - - - - - - - - - - -  - - - -
24 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Road and Pavement Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS

Ashghal
No. Test Standard

Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
BS 6088
6.73 Particle Size Distribution of Glass Beads
Appendix B - √ - - - - - - √ - - - -  - - - -
Measurement of Retro-reflectivity of BS EN 1436
6.74
pavement marking materials Annex A&B - √ - - - - - - √ - - - -  - - - -
Measurement of Retro-reflectivity of
6.75
pavement marking materials
ASTM E1710 - √ - - - - - - - - - - √  - - - -
BS 3262
6.76 Measurement of Skid Resistance
Part 1–Ap. J - √ - - √ - - - √ - - - -  - - - -
BS 3262
6.77 Determination of Heat Stability
Part 1–Ap. G - - - - - - - - √ - - - -  - - - -
BS 3262
6.78 Determination of Luminance Factor
Part 1–Ap. F - √ - - - - - - √ - - - -  - - - -
BS 3262
6.79 Dry Film Thickness
Part 3–Ap. B - √ - - - - - - √ - - - √  - - - -
BS EN 13197
6.80 Wet Film Thickness by Notch Gauge
Annex C - √ - - - - - - √ - - - -  - - - -

6.81 Wet Film Thickness by Notch Gauge ASTM D4414 - √ - - - - - - - - - - -  - - - -

Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 
 
 
 
25 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

 
 
 

Approved Labs for Asphalt Mix Preparation and Verification

 
 
 
Laboratory

Tech Lab
No. Item

QGEC
Fugro
ACES
Marshall Mixtures
1 Asphalt Mix Design √ √ - -
2 Asphalt Mix Verification* √ √ √ √
*Mix design verification shall be carried out by a lab different from the one that prepared the mix.

Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship, inclusive of formal, 
financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
 
  ‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬:‫ﻣﻼﺣﻅﻪ‬
 
 
 
 
26 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/AS/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

7. Steel Tests
Laboratory

ELEMENT

Tech Lab

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

JEL
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
QIL
ITL
BS EN 10002
7.1 Tensile Strength Test
Part 1 √* √ √ √ √ - - √ √ - √ - - √ √ - -
7.2 Tensile Strength Test ASTM A370 √ √ √ - √ - - √ - √ √ - - √ √ - -
BS 4449
7.3 Bend Test
Sec. 7.2.5 √ √ √ √ √ - - √ √ - √ - - √ √ - -
BS 4449
7.4 Rebend Test
Sec. 7.2.5 √ √ √ √ √ - - √ √ √ √ - - √ √ - -
BS 131
7.5 Izod Impact Test of Metals
Part 1 - - - - - - - √ - - - - - - - - -
7.6 Notched Bar Impact Test of Metals ASTM E23 √ - - - - - - √ - - - - - - - - -
7.7 Charpy Impact Method BS EN 10045 - - - - - - - √ - - - - - - - - -
Tensile Test Of High Tensile Steel
7.8
Wire &Strand
BS EN ISO 15630-3 √ √ √ - - - - - - - - - - - - - -
Testing Multi-Wire Steel
7.9
Prestressing Strand
ASTM A1061 √ √ √ - √ - - - - - - - - - - - -
Tension Testing of Wire Ropes and
7.10
Strand
ASTM A 931 - - - - - - - - - - - - - - - - -
Load Resistance Test Of Manhole
7.11
Covers
BS EN 124 √ √ - - - - - - - - - - - - √ - -
 
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 
28 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                             QSD/LL/ST/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

8. Geotechnical Tests
Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

BATLABS
JEL
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
QIL
ITL
Laboratory Tests
BS 5930
8.1 Description of Soil and Rock
Section 6 - √ √ √ √ - - √ √ - √ - - √ √ - -
Undrained Triaxial Test without BS 1377
8.2
Pore Water Pressure Measurement Part 7-Sec. 8 - - - √ - - - √ √ - - - - - - - -

8.3 Point Load Index Determination ASTM D5731 - √ √ √ √ - - √ √ √ √ - - - √ - -

Preparing Rock Core Specimens to
8.4
Dimensional and Shape Tolerances
ASTM D4543 √ √ √ √ √ - - √ - √ - - - - √ - -
Compressive Strength of Rock
8.5
Core Specimen
ASTM D7012 √ √ √ √ √ - - √ √ √ √ - - √ √ - -
Determination of One Dimensional BS 1377
8.6
Consolidation Properties of Soils Part 5-Sec. 3 - √ - √ - - - √ - - √ - - - - - -
Determination of One Dimensional
8.7
Consolidation Properties of Soils
ASTM D2435 - √ - - - - - √ - - - - - - - - -
BS 1377
8.8 Direct Shear on Soil (Small Box)
Part 7-Sec. 4 - √ √ √ √ - - √ √ √ √ - - - √ - -
BS 1377
8.9 Direct Shear on Soil (Large Box)
Part 7-Sec. 5 - - - - - - - - - - - - - - - - -
8.10 Direct Shear on Rock ASTM D5607 - √ - - - - - √ - - √ - - - - - -

 
29 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/GE/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Geotechnical Tests (Cont.)

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

BATLABS
JEL
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
QIL
ITL
One Dimensional Swell of Cohesive
8.11
Soils
ASTM D4546 - √ - - - - - √ - - - - - - - - -

BS 1377
8.12 Constant Head Permeability Test
Part 5-Sec. 5 - √ √ - - - - √ √ - - - - - √ - -

BS 1377
8.13 Vane Shear Test
Part 7-Sec. 3 - √ - - - - - - √ - - - - - - - -
Field Tests
BS 5930
8.14 Soil Sampling
Cl. 22 - √ √ √ √ - - √ √ √ √ - - - √ - -
BS 5930
8.15 Ground Water Sampling
Cl. 23 - √ √ √ √ - - √ √ √ √ - - - √ - -

BS 5930
8.16 Ground Water Level Measurement
Cl. 23, 27, 47 - √ √ √ √ - - √ √ √ √ - - - √ - -

BS 5930
8.17 Falling Head Permeability Test
Cl. 25 - √ √ √ √ - - √ √ √ √ - - - √ - -

BS 5930
8.18 Packer Test
Cl. 25 - √ √ √ √ - - √ √ √ √ - - - √ - -

BS 1377
8.19 Standard Penetration Test (SPT)
Part 9-Sec. 3.3 - √ √ √ √ - - √ √ √ √ - - - √ - -
 
30 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/GE/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Geotechnical Tests (Cont.)

Laboratory

ELEMENT

Tech Lab

Teyseer
Gulf Lab

BATLABS
Pioneer

Ashghal
No. Test Standard

JEL
QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
QIL
ITL
8.20 Electrical Resistivity Test ASTM G57 - √ √ √ √ - - √ √ √ √ - - - √ - -

BS 1377
8.21 Plate Load Test
Part 9-Sec. 4.1 √ √ √ √ √ √ - √ √ √ √ - √ √ √ - -

BS 1377
8.22 California Bearing Ratio (CBR) Test
Part 9-Sec. 4.3 √ √ √ √ √ - - √ √ √ √ - √ √ √ - -

Dynamic Cone Penetrometer for

8.23
Shallow Pavements
ASTM D6951 √ √ √ - - - - √ - √ - - √ - - - √*
 
Notes: 
‐ Other tests related to geotechnical field can be found in soil and aggregate tests sections. 
‐ This list is for geotechnical related tests. General requirements for geotechnical soil investigation firms should follow the Ministry of Environment conformity criteria. 
‐ It is the responsibility of the Engineer and Consultant to ensure the Materials Testing Laboratory proposed by the Contractor is totally independent and has no relationship, 
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
 

.‫ﺧﻼﻓﻪ‬ ‫ﺃﻭ‬ ‫ﻋﺎﺋﻠﻲ‬ ،‫ﻣﺎﻟﻲ‬ ،‫ﻗﺎﻧﻭﻧﻲ‬ ً ‫ﺳﻭﺍءﺍ‬ ‫ﻛﺎﻥ‬ ‫ﺷﻛﻝ‬ ‫ﺑﺄﻱ‬ ‫ﺍﻟﺑﺎﻁﻥ‬ ‫ﻣﻥ‬ ‫ﺍﻟﻣﻘﺎﻭﻝ‬ ‫ﺃﻭ‬ ‫ﻭﺍﻟﻣﻘﺎﻭﻝ‬ ‫ﺍﻟﻣﻘﺗﺭﺡ‬ ‫ﺍﻟﻣﺧﺗﺑﺭ‬ ‫ﺑﻳﻥ‬ ‫ﺻﻠﻪ‬ ‫ﻭﺟﻭﺩ‬ ‫ﻋﺩﻡ‬ ‫ﻣﻥ‬ ‫ﺍﻟﺗﺄﻛﺩ‬ ‫ﻭﺍﻻﺳﺗﺷﺎﺭﻱ‬ ‫ﺍﻟﻣﺷﺭﻭﻉ‬ ‫ﻣﻬﻧﺩﺱ‬ ‫ﻣﺳﺅﻭﻟﻳﺔ‬ ‫ﺍﻧﻬﺎ‬ ‐ :‫ﻣﻼﺣﻅﻪ‬
  ‫ )*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬-
 

 
31 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/GE/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

9. Environmental Tests
Laboratory

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
QGEC
Fugro
ACES
ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA/AWWA 4500-H+B
9.1 pH 22nd Edition 2012 √ √ √ √ √ - - - √ √ √ √ - - √ - √
Electrical APHA/AWWA 2510-B
9.2
Conductivity 22nd Edition 2012 √ √ √ √ √ - - - √ √ √ √ - - √ - √
APHA/AWWA 2130 B
9.3 Turbidity 22nd Edition 2012 √ √ √ √ √ - - √ √ √ √ √ - - √ - √
APHA/AWWA 2540-B
9.4 Total Solids 22nd Edition 2012 √ √ √ √ √ - - - √ √ - - - - √ - √*
Total Suspended APHA/AWWA 2540-D
9.5
Solids (TSS) 22nd Edition 2012 √ √ √ √ √ - - √ √ √ √ - - - √ - √
Total Volatile
APHA/AWWA 2540-D
9.6 Suspended Solids
22nd Edition 2012 - √ √ - - - - - √ - - - - - √ - √*
(TVSS)
Total Dissolved APHA/AWWA 2540-C
9.7
Solids (TDS) 22nd Edition 2012 √ √ √ √ √ - - - √ √ √ √ - - √ - √
Total Volatile
APHA/AWWA 2540-C
9.8 Dissolved Solids
22nd Edition 2012 - √ √ - - - - - √ - - - - - √ - √*
(TVDS)
APHA/AWWA 2540-F
9.9 Settleable Solids
22nd Edition 2012
- √ √ √ - - - - - - - - - - √ - √*
APHA, SM,2710 D,
9.10 Sludge Weight
22nd Edition 2012
- √ - - - - - - - - - - - - - - √*
APHA, SM,2710 D, 22nd
9.11 Sludge Volume Edition 2012 - √ - - - - - - - - - - - - - - √*
 
   
32 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Environmental Tests (Cont.) 
Laboratory

ELEMENT

Tech Lab

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA, SM,2710 D,
9.12 Sludge Volume Index
22nd Edition 2012 - √ - √ - - - - - - - - - - - - √*
APHA/AWWA 22nd
Biochemical Oxygen
9.13
Demand (BOD)
Edition 2012.Test- √ √ √ √ √ - - - √ √ - - - - √ - √
5210B & 4500-OC
APHA/AWWA 22nd
9.14 Dissolved Oxygen Edition 2012.Test- √ √ √ √ √ - - - √ √ - - - - √ - √
4500-O G
APHA/AWWA 22nd
Chemical Oxygen
9.15
Demand (COD)
Edition 2012 Test- √ √ √ √ √ - - - √ √ - √ - - √ - √
5220 D
APHA/AWWA 22nd
Chemical Oxygen
9.16
Demand (COD)
Edition 2012 Test- - - - - - - - - - √ - - - - - - -
5220 B
Total Kjeldahl APHA/AWWA 4500 N
9.17
Nitrogen 22nd Edition 2012 √ √ - √ - - - - - √ - - - - - - √
APHA/AWWA 4500 N
Total Organic
9.18
Nitrogen
org- 22nd Edition √ √ - √ - - - - - √ - - - - - - √
2012
APHA/AWWA 22nd
9.19 Ammonia Nitrogen Edition 2012 Test- √ √ - √ - - - - - √ - - - - - - √
4500 NH3 B&C
APHA/AWWA 22nd
9.20 Nitrate Nitrogen Edition 2012 Test- - √ √ √ - - - - √ - - √ - - - - -
4500-NO3D
APHA/AWWA 22nd
9.21 Nitrite Nitrogen Edition 2012 Test- √ √ - √ √ - - - - - - - - - - - -
4500-NO2B
APHA/AWWA 5520 D
9.22 Oil & grease
22nd Edition 2012 √ √ √ - - - - - - √ - - - - - - √*

33 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

 Environmental Tests (Cont.) 
Laboratory

ELEMENT

Tech Lab

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA/AWWA 4500-Cl
9.23 Total Chlorine G, 22nd Edition 2012 √ √ √ √ √ - - √ √ - - - - - - -
APHA/AWWA 4500-Cl I,
9.24 Residual Chlorine
22nd Edition 2012 √ √ - - - - - √ - √* - √ - - - - √
APHA/AWWA
9.25 Chloride 4500-Cl B, 22nd Edition √ √ √ √ √ - - - √ √ √ √ - - √ - √*
2012
APHA 4110-B, 22nd
9.26 Chloride
Edition 2012 - √ - - - - - - - √ - - - - - - √*
9.27  APHA 4110-B, 22nd
Sulphate
Edition 2012
- √ - - - - - - - √ - - - - - - -
9.28  APHA 4110-B, 22nd
Nitrate
Edition 2012
- √ - - - - - - - √ - - - - - - √
9.29  APHA 4110-B, 22nd
Nitrite
Edition 2012
- √ - - - - - - - √ - - - - - - √
APHA 4110-B, 22nd
9.30 Fluride
Edition 2012 - - - - - - - - - √ - - - - - - -
APHA 4110-B, 22nd
9.31 Iodide
Edition 2012 - - - - - - - - - √ - - - - - - -
APHA 4110-B, 22nd
9.32 Phosphate
Edition 2012
- - - - - - - - - √ - - - - - - -
APHA/AWWA 4500-P
9.33 Phosphorous ( total) D&C √ √ - √ √ - - - √ - - √ - - √ - √
22nd Edition 2012
Phenol APHA/AWWA 5530
9.34
Concentrations 22nd Edition 2012 - √ - - - - - - - √ - - - - - - -

 
34 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Environmental Tests (Cont.) 
Laboratory

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA/AWWA 4500-CN
9.35 Cyanide C&E - - - √ - - - - - √ - - - - - - -
22nd Edition 2012
APHA/AWWA 4500-
9.36 Sulphate
SO4, 22nd Edition 2012 √ √ √ √ √ - - √ √ √ - √ - - √ - √*
APHA/AWWA 4500--S2
9.37 Sulphide E or F, 22nd Edition √ √ √ - √ - - √ - √ - - - - - - √*
2012
APHA/AWWA 4500F,
9.38 Fluoride 22nd Edition 2012 √ - - √ √ - - - √ √ - - - - - - -

APHA/AWWA 2340-C,
9.39 Total Hardness
22nd Edition 2012 √ √ √ √ √ - - - √ √ - √ - - √ - √
APHA/AWWA
9.40 Calcium 3500-Ca B, √ √ √ √ √ - - - √ - - √ - - √ - √
22nd Edition 2012
Magnesium APHA/AWWA
9.41 Concentration by 3500-Mg B- 22nd Edition - √ √ √ √ - - - √ - - √ - - √ - √
calculation 2012
APHA 3120-B
9.42 Magnesium
22nd Edition 2012 √ √ √ √ √ - - - - √ - - - - √ - √

APHA 3120-B,
9.43 Calcium
22ndEdition 2012 √ √ √ √ √ - - - - √ - - - - - - √*
APHA 3120-B, 22nd
9.44 Sodium
Edition 2012 √ √ √ √ √ - - - - √ - - - - - - √
35 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Laboratory

ELEMENT

Tech Lab

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA 3120-B, 22nd
9.45 Potassium
Edition 2012 √ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B
9.46 Iron
22nd Edition 2012 √ √ √ √ √ - - √ - √ - - - - - - √
APHA 3120-B, 22nd
9.47 Aluminum
Edition 2012 √ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.48 Arsenic
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.49 Cadmium
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.50 Chromium
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.51 Cobalt
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.52 Copper
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √*
APHA 3120-B, 22nd
9.53 Nickel
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.54 phosphorous
Edition 2012
√ - - - √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.55 Zinc
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √
APHA 3120-B, 22nd
9.56 Silicon
Edition 2012
√ - - √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.57 Silver Edition 2012  √ √ √ √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.58 Antimony Edition 2012  √ - - √ √ - - - - √ - - - - - - -

36 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Laboratory

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA 3120-B, 22nd
9.59 Barium
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.60 Beryllium
Edition 2012
√ - - √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.61 Boron
Edition 2012
√ √ - √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.62 Manganese
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - √*
APHA 3120-B, 22nd
9.63 Molybdenum
Edition 2012
√ √ √ √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.64 Selenium
Edition 2012
√ - √ √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.65 Thallium
Edition 2012
√ √ - √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.66 Titanium
Edition 2012
√ - √ √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.67 Vanadium
Edition 2012 √ - √ √ √ - - - - √ - - - - - - -
APHA 3120-B, 22nd
9.68 Lead √ √ √ √ √ - - - - √ - - - - - - √
Edition 2012
APHA 3120-B, 22nd
9.69 Lithium √ √ √ √ √ - - - - √ - - - - - - -
Edition 2012
APHA 3120-B, 22nd
9.70 Mercury √ √ √ √ √ - - - - √ - - - - - - √*
Edition 2012
APHA 3120-B, 22nd
9.71 Tin
Edition 2012
- - - √ √ - - - - - - - - - - - √
APHA 3500-Cr B, 22nd
9.72 Chromium(VI)
Edition 2012 - - - - √ - - - - √ - - - - - - -
APHA 4110-B, 22nd
9.73 Bromide
Edition 2012 - √ - - - - - - - √ - - - - - - -
37 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

 
 Environmental Tests (Cont.) 
Local Labs

ELEMENT

Tech Lab

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
No. Test Standard

QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
9.74 Bromate - - - - - - - - - - - - - - - - -
APHA/AWWA
9.75 Total Alkalinity 2320B, 22nd Edition √ √ √ √ √ - - √ √ √ - √ - - √ - √
2012
APHA/AWWA 2320-
Phenolphthalein
9.76
Alkalinity
B, 22nd Edition 2012 √ √ √ √ √ - - √ √ - - - - - √ - √*

APHA 2320-B, 22nd

9.77 Bicarbonate
Edition 2012 √ √ √ √ √ - - - √ √ - - - - - - -

APHA 2320-B, 22nd

9.78 Carbonate
Edition 2012 √ √ √ √ √ - - - √ √ - - - - - - -
APHA/AWWA
Total Organic
9.79
Carbon (TOC)
5310-B or C, 22nd √* √ √* - √ - - - - √ - - - - - - √*
Edition 2012
Residual
9.80
Pesticides
EPA 608 √ - - √ - - - - - √ - - - - - - √*
APHA/AWWA/ 6200
Organic
9.81
Hydrocarbon
volatile Organic √ √ √ √ √ - - - - √ - - - - - - √*
Compounds
APHA/AWWA/ 4500-
9.82 Total Silicates SiIO2-C, 22nd - √ - - - - - - - - - - - - - - √*
Edition 2012
  

38 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Environmental Tests (Cont.) 
Local Labs

ELEMENT

Tech Lab

BATLABS
Teyseer
Gulf Lab
No. Test Standard

Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
APHA/AWWA/ 3111 D
, Direct Nitrous Oxide
9.83 Silicon, Aluminum
– Acetylene flame √ - - √ - - - - - - - - - - - - √*
method (AAS)
APHA/AWWA
9.84 Total Coliforms 9222B & 9222D, 22nd √ √* - √ - - - √ - √ - - - - - - √*
Edition 2012
APHA/AWWA-9222D,
9.85 Fecal Coliform 22nd Edition 2012 √ √* - √ - - - - - √ - - - - - - √*
APHA/AWWA-9223B
9.86 E-Coli 22nd Edition2012 √ √ √ √ √ - - √ √ √ - - - - - - √*
IDEXX method
APHA/AWWA-9223B
9.87 Total Coliforms 22nd Edition2012 - √ - √ √ - - - √ √ - - - - - - √
IDEXX method 
APHA/AWWA-9223B
9.88 Fecal Coliform 22nd Edition2012 - √ - √ √ - - - √ √ - - - - - - √
IDEXX method 
WHO, Lab manual of
Nematodes Parasitological and
9.89
(Helminths) Eggs Bacteriological
- √ - √ - - - - - √ - - - - - - √
Techniques, 1996
Microscopic
9.90
Examination
- - - - - - - - - - - - - - - - - √*
Pseudomonas APHA 9213-E
9.91
Aeruginosa 22nd Edition 2012 - - - √ - - - - √ - - - - - - - -

39 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Local Labs

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
Fecal Streptococcus/ APHA 9230-C
9.92
Enterococcus 22nd Edition 2012 - - - √ - - - - - √ - - - - - - -

APHA 9260-J
9.93 Legionella
22nd Edition 2012 - - - - - - - - - √ - - - - - - -
RT – PCR
9.94 Enteric Viruses
Methodology - - - - - - - - - √ - - - - - - -
RT – PCR
9.95 Cryptosporidium
Methodology - - - - - - - - - √ - - - - - - -
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
    .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -

40 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                            QSD/LL/EN/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

10. Non Destructive Tests

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Teyseer
Gulf Lab

Pioneer

Ashghal
BATLABS
QGEC
Fugro
ACES

ACTS

QEL

DTL

CTL
JEL

QIL
ITL
10.1 Falling Weight Deflectometer ASTM D4694 - √ √ - - - - - - √ - -  - - - - √* 

10.2 Road Profilometer (IRI) ASTM E950 - √ √ - - - - √ √ √ - -  - √ - - √* 

10.3 Pavement Quality Indicator ASTM D7113 - - - - - - - - - - - -  - - - - √* 

Rebound Hammer Test for
10.4
Concrete
ASTM C805 √ √ √ - - - - √ - √ √ √  √ - √ - √ 
BS 1881
10.5 Concrete Cover Determination
Part 204 √ √ √ √ √ - - - √ √ √ -  - - √ - - 
BS EN 12504
10.6 Ultrasonic Pulse Velocity
Part 4 √ √ √ - √ - - √ √ √ √ -  √ - √ - - 

10.7 Crack Width Gauge Gauge Manual √ √ √ - √ - - - - - - -  - - - - - 

Microscope
10.8 Crack Measurement Microscope
Manual √ √ √ - √ - - - - - √ -  - - √ - - 

10.9 Pile Integrity (Pulse Echo Test) ASTM D5882 - √ √ - - - - √ - - - -  - - √ - - 

10.10 Pile Integrity (Cross Hole Test) ASTM D6760 - √ √ - - - - √ - - - -  - - √ - - 

 

40 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                                               QSD/LL/ND/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

            Non Destructive Tests (Cont.)

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Teyseer
Gulf Lab

Pioneer

Ashghal
BATLABS
QGEC
ACES

ACTS

Fugro
QEL

DTL

CTL
JEL

QIL
ITL
10.11 Pile Dynamic Test ASTM D4945 - √ √ - - - - √ - - - -  - - √ - - 

10.12 Caliper Logging of Borehole ASTM D6167 - √ - - - - - - - - - -  - - √ - - 

10.13 Coating Pull-Off Test ASTM D4541 √ √ √ - - - - √ √ - - -  - - √ - - 

ASTM D7091 /
10.14 Coating Thickness Measurement
D6132 - √ - - - - - - √ - - -  - - √ - - 

ASTM D4787 /
10.15 Holiday Detection of Coating
D5162 - √ - - - - - √ - - - -  - - - - - 

ASTM E709 /
10.16 Magnetic Particle Inspection
ASME - Sec. V - √ - - - - - - - - - -  - - √ - - 

ASTM E165 / -
10.17 Dye Penetration Test
ASME - Sec. V - √ - - - - - - - - - -  - - √ - 
 
Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
   
41 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                                               QSD/LL/ND/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

11. Geotextiles & Waterproofing Tests

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS

Ashghal
No. Test Standard

Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
GEOTEXTILES TESTING
Breaking Strength and Elongation of
11.1
Textile Fabrics (Grab Test).
ASTM D5034 - √* - - - - - - - - - - - - √ - -
11.2 Textiles Puncture Resistance. ASTM D751 - √* - - - - - - - - - - - - √ - -
11.3 Textiles Bursting Strength. ASTM D3787 - √* - - - - - - - - - - - - - - -
Trapezoid Tearing Strength of
11.4
Geotextiles.
ASTM D4533 - √ - - - - - - - - - - - - √ - -
Static Puncture Test (CBR Test) BS EN ISO
11.5
12236 - √ - - - - - - - - - - - - √ - -
Tensile Strength &Elongation At BS EN ISO
11.6
Rupture. 10319 - √ - - - - - - - - - - - - √ - -
Breaking Strength and Elongation of
11.7
Textile (strip Test).
ASTM D5035 - √* - - - - - - - - - - - - √ - -
Dynamic Perforation Test (Cone Drop BS EN ISO
11.8 Test) 13433 - √ - - - - - - - - - - - - √ - -
BS EN ISO
11.9 Water Permeability
11058 - √ - - - - - - - - - - - - √ - -
BS EN ISO
11.10 Pore Size
12956 - √* - - - - - - - - - - - - √ - -
Determination Of Mass Per Unit Area
11.11
(Weight)
BS EN 12127 - √* - - - - - - - - - - - - √ - -
Measuring The Nominal Thickness Of
11.12
Geosynthetics
ASTM D5199 - √ - - - - - - - - - - - - √ - -
11.13 Determination Of Thickness Of Textiles BS EN ISO 5084 - √* - - - - - - - - - - - - √ - -
42 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                        QSD/LL/G&W/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Gulf Lab

BATLABS

Ashghal
Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
WATERPROOF MEMBRAINS & PLASTIC LINER TESTING
Determination of Tensile Properties for
11.14
plastic
ASTM D 638 - √ - - - - - - - - - - - - √ - -
Determination of Tensile Properties for BS EN ISO 527
11.15
plastic Part 3 - √ - - - - - - - - - - - - √ - -
Tensile strength of Vulcanized Rubber
11.16
and Thermoplastic Elastomers
ASTM D 412 - √* - - - - - - - - - - - - √ - -
Initial Tear Resistance of Plastic Film
11.17
and Sheeting
ASTM D 1004 - √ - - - - - - - - - - - - √ - -
Pressure-Sensitive Adhesion to Primed
11.18
Concrete
ASTM D 1000 - √* - - - - - - - - - - - - - - -
11.19 Puncture Resistance of Ground Covers ASTM E 154 - √ - - - - - - - - - - - - √ - -
11.20 Water Absorption of Plastics ASTM D 570 - √ - - - - - - - - - - - - √ - -
Resistance of Plastics to Chemical
11.21
Reagents
ASTM D 543 - √ - - - - - - - - - - - - - - -
11.22 Water Vapor Transmission rate ASTM E 96 - √ - - - - - - - - - - - - - - -
Brittleness Temperature of Plastics and
11.23 Elastomers by Impact ASTM D 746 - - - - - - - - - - - - - - - - -
11.24 Determination of Durometer Hardness ASTM D 2240 - √ - - - - - - - - - - - - √ - -
Determination of thickness and mass
11.25 per unit area of Bitumen sheets for roof BS EN 1849-1 - √* - - - - - - - - - - - - √ - -
waterproofing
 

43 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                        QSD/LL/G&W/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

 
 
Geotextiles & Water Proofing Tests (Cont.)
Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS
No. Test Standard

Ashghal
Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
WATERPROOF MEMBRAINS & PLASTIC LINER TESTING
Determination of thickness and mass
11.26 per unit area of Plastic and rubber BS EN 1849-2 - √* - - - - - - - - - - - - √ - -
sheets
11.27 Dimensions Measurement of Rubber ASTM D 3767 - √ - - - - - - - - - - - - √ - -
 
Notes:  ‐ It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship, inclusive of 
formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 

44 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                        QSD/LL/G&W/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

12. Leakage Testing of Buildings

Local Labs

ELEMENT

Tech Lab
No. Test Standard

BATLABS
Teyseer
Gulf Lab

Pioneer

Ashghal
QGEC
ACES

ACTS

Fugro
QEL

DTL

CTL
JEL

QIL
ITL
Rate of Air Leakage Through
Exterior Windows, Curtain Walls,
12.1
and Doors Under Specified Pressure
ASTM E283 - - - - - - - - - - - - - - - - -
Differences
Structural Performance of Exterior
Windows, Doors, Skylights and
12.2
Curtain Walls by Static Air Pressure
ASTM E330 - - - - - - - - - - - - - - - - -
Difference
Water Penetration of Exterior
Windows, Skylights, Doors, and
12.3
Curtain Walls by Uniform Static Air
ASTM E331 - - - - - - - - - - - - - - - - -
Pressure Difference
Air Permeability of Doors and
12.4
Windows
BS EN 1026 - - - - - - - - - - - - - - - - -
Water tightness of Doors and
12.5
Windows
BS EN 1027 - - - - - - - - - - - - - - - - -
Doors and Windows Resistance to BS EN
12.6
Wind Loads 12211 - - - - - - - - - - - - - - - - -
BS EN
12.7 Air Permeability of Curtain Walling
12153 - - - - - - - - - - - - - - - - -
Water Tightness of Curtain Walling BS EN
12.8
under Static Pressure 12155 - - - - - - - - - - - - - - - - -
 
 

45 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                             QSD/LL/LK/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Leakage Testing of Buildings (Cont.)

Local Labs

ELEMENT

Tech Lab

Teyseer
Gulf Lab
No. Test Standard

Pioneer

Ashghal
BATLABS
QGEC
Fugro
ACES

ACTS

QEL

DTL

JEL

CTL
QIL
ITL
Resistance to Wind Load of BS EN
12.9
Curtain Walling 12179 - - - - - - - - - - - - - - - - -

BS EN
12.10 Air Permeability of Buildings
13829 - - - - - - - - - - - - - - - - -

Water Penetration using Dynamic

AAMA
12.11 Pressure for Windows, Curtain
501.1 - - - - - - - - - - - - - - - - -
Walls and Doors
Water leakage field check for
AAMA
12.12 Storefronts, Curtain Walls and
501.2 - - - - - - - √ - - - - - - - - -
Sloped Glazing Systems
   

Notes:    ‐  It  is  the  responsibility  of  the  Engineer  and  Consultant  to  ensure  the  materials  testing  laboratory  proposed  by  the  Contractor  is  totally  independent  and  has  no 
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 

46 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                             QSD/LL/LK/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

13. Paints &varnishes Tests

Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS

Ashghal
No. Test Standard

Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
PAINTS &VARNISHES TESTING
Density of Liquid Coatings, Inks
13.1
&paints
ASTM D1475 - √ - - - - - √* - - - - - - - - -
Measurement of Dry-Film Thickness of
13.2
Organic Coatings
ASTM D1005 - √* - - - - - √* - - - - - - - - -
Measurement of Wet Film Thickness of
13.3
Organic Coatings
ASTM D1212 - √* - - - - - √* - - - - - - - - -
13.4 Scrub Resistance of Wall Paints ASTM D2486 - √* - - - - - √* - - - - - - - - -
13.5 Viscosity of Paints ASTM D562 - √ - - - - - - - - - - - - - - -
13.6 Sag Resistance of Paints ASTM D4400 - √* - - - - - - - - - - - - - - -
Measurement of specular gloss of non-
13.7
metallic paint films
BS EN ISO 2813 - √* - - - - - - - - - - - - - - -
Fineness of Dispersion of Pigment-
13.8
Vehicle Systems
ASTM D1210 - √* - - - - - - - - - - - - - - -
Determination of color and color
13.9
difference
ISO 7724-2 - √* - - - - - - - - - - - - - - -
13.10 Comparison of contrast ratio BS EN ISO 2814 - √* - - - - - - - - - - - - - - -
Determination of pH value of aqueous
13.11
suspension
BS EN ISO 787-9 - √* - - - - - - - - - - - - - - -
13.12 Cross-cut test of paints &varnishes BS EN ISO 2409 - √* - - - - - √* - - - - - - - - -

13.13 Adhesion (Pull off ) strength ASTM D4541 - √ - - - - - √ - - - - - - -  - -

47 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                        QSD/LL/P&V/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Paints &Varnishes Tests (Cont.) 

Laboratory

ELEMENT

Tech Lab
No. Test Standard

Gulf Lab

BATLABS

Ashghal
Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
Pigment Content of Water-Emulsion
13.14
Paints by Low-Temperature Ashing
ASTM D3723 - √* - - - - - √* - - - - - - - - -
13.15 Determination of resistance to liquids ASTM D5401 - √* - - - - - √* - - - - - - - - -
Pigments for the coloring of building
13.16
materials
BS EN 12878 - - - - - - - - - - - - - - - - -
Determination Volatile Content of
13.17
Coatings
ASTM D2369 - √* - - - - - √* - - - - - - - - -
13.18 Determination of the Nonvolatile Content ASTM D5095 - - - - - - - √* - - - - - - - - -
Bend Test of Attached Organic
13.19
Coatings
ASTM D522 - √* - - - - - - - - - - - - - - -
BS EN ISO
13.20 Bend test of Paints and varnishes
1519 - √* - - - - - - - - - - - - - - -
Abrasion Resistance of Organic Coatings
13.21
by the Taber Abraser
ASTM D4060 - √* - - - - - - - - - - - - - - -
13.22 Tensile Properties of Organic Coatings ASTM D2370 - √* - - - - - - - - - - - - - - -
Fluorescent UV-Condensation Exposures
13.23
of Paint and Related Coatings
ASTM D4587 - - - - - - - - - - - - - - - - -
Filtered Open-Flame Carbon-Arc
132.4
Exposures of Paint and Related Coatings
ASTM D822 - - - - - - - - - - - - - - - - -
Drying, Curing, or Film Formation of
13.25
Organic Coatings at Room Temperature
ASTM D1640 - √* - - - - - √* - - - - - - - - -

48 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                        QSD/LL/P&V/V12/2018 
 
 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

 
 
Paints &Varnishes Tests (Cont.)
Laboratory

ELEMENT

Tech Lab
Gulf Lab

BATLABS
No. Test Standard

Ashghal
Teyseer
Pioneer

QGEC
Fugro
ACES

ACTS

DTL
QEL

CTL
JEL

QIL
ITL
Rheological Properties of Non-
13.26 Newtonian Materials by Rotational ASTM D2196 - √* - - - - - √* - - - - - - - - -
Viscometer
13.27 Alkali Resistance ASTM D1647 - √* - - - - - √* - - - - - - - - -
 
Notes:  ‐ It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship, inclusive of 
formal, financial, family or legal, or other with the Contractor or the Contractors Sub‐contractors. 
‐ (√*) means conditional approval 
.‫ ﻋﺎﺋﻠﻲ ﺃﻭ ﺧﻼﻓﻪ‬،‫ ﻣﺎﻟﻲ‬،‫ ﺍﻧﻬﺎ ﻣﺳﺅﻭﻟﻳﺔ ﻣﻬﻧﺩﺱ ﺍﻟﻣﺷﺭﻭﻉ ﻭﺍﻻﺳﺗﺷﺎﺭﻱ ﺍﻟﺗﺄﻛﺩ ﻣﻥ ﻋﺩﻡ ﻭﺟﻭﺩ ﺻﻠﻪ ﺑﻳﻥ ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻣﻘﺗﺭﺡ ﻭﺍﻟﻣﻘﺎﻭﻝ ﺃﻭ ﺍﻟﻣﻘﺎﻭﻝ ﻣﻥ ﺍﻟﺑﺎﻁﻥ ﺑﺄﻱ ﺷﻛﻝ ﻛﺎﻥ ﺳﻭﺍء ﻗﺎﻧﻭﻧﻲ‬- :‫ﻣﻼﺣﻅﺎﺕ‬
  .‫)*√( ﺗﻌﻧﻲ ﺍﻋﺗﻣﺎﺩ ﻣﺷﺭﻭﻁ ﻭﻟﻔﺗﺭﻩ ﻣﺣﺩﻭﺩﺓ‬ -
 

49 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                        QSD/LL/P&V/V12/2018 
 
 
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
14.Calibration Laboratories
Laboratory Al Bader LABTECH PROMPT
No Calibration Calibration
Range CMC Range CMC Range CMC
field item
01 Mass Weighing   0 to200 g 0.61mg 0 to 220g /0.0001 g  0.00009 g   
scales  0 to420 g  0.6 mg  221to1000 g   
0 to510 g   0.7 mg  /0.001 g  0.0017 g 
0 to 5000 g   
0 g to4200 g   8 mg 
/0.01 g  0.01 g 
0 g to 12000g   10 mg 
0 to 10000g   
0 g to 110Kg  35 g  /0.1g  0.06 g 
0 g to 31 Kg  0.1 g  0 to 30 kg   
    0 to 500 kg  0.0011kg 
0 to 200g  0.61 mg  0 to 1500 kg  0.01 kg 
200 g to 500g  3.1 mg  0.09 kg 
500 to 1 Kg   6.1 mg 
1 Kg to 5 Kg  0.11 g 
5 Kg to 50 Kg  0.81 g 
OIML Masses up to 1000mg 1mg
1g to1000g  1.2mg 
1kg to 20kg  0.34g 
   

50 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
Laboratory Al Bader LABTECH PROMPT
No Calibration Calibration
Range CMC Range CMC Range CMC
field item
02 Pressure  Pneumatic      0 to 10000  0.41%  ‐1 bar to 120 bar 0.57% FS
pressure  psi /1psi 
gauge  

Vacuumed  ‐1 to 2 bar  0.07% FS   ‐1 bar to 200  bar 0.57% FS

gauge 
Hydraulic   0 to 70 bar 0.1% FS 0 to 10000  0.41% 0 bar to 140  bar 0.39% FS
pressure  0 to 700 bar  0.36% FS  psi /1psi  140 bar to 1200 
gauge  0 bar to 2500 bar  0.12% FS  bar 
Speedy  0 psi to 20 psi 0.85 psi  
moisture 
gauge  
03 Force  Compression  Up to 3336 kN 0.66% 0 to 100  kN  0.12 %
machines  0.1kN to 3000 kN  0.17%  /0.01kN   
0  to 3000 kN  0.07 % 
/0.01 kN 
Proving rings        
Compression   0.001 kN to 200 kN  0.25%     
Tension   0.1 to 50 KN  0.27%  0 to 50  kN  0.25 % 
Tension load         
cell 
Tension         
machines 
Wheel         
Tracker      
Static Load  Up to 158 lb  0.05 lb 
 

   

51 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
  Laboratory   Al Bader LABTECH PROMPT
No Calibration
Calibration field Range CMC Range CMC Range CMC
item
03 Force Compression  1 kN to 2000 kN  0.16 % 
testing 
machine 
performance 
test (stability 
verification) 
Pull off tester  0 psi to 3500  5 psi
psi/1psi 
Hydraulic jack 
Torque  0 N.m to 500  0.6%
N.m 
Hardness  Up to 100 HRA 0.9 HRA
Rockwell  Up to 100 HRC  1.0 HRC 
hardness  Up to 100   
machines 
HRBW   0.9 HRBW 
17.9 HRC to   
69.5HRC  1 HRC 
Hardness 
Vickers 
hardness 
machines 
Hardness 
Brinell 
hardness 
machines 
Hardness shore   0 RHD to 100  2 HRD
(D)  HRD 

52 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
Laboratory Al Bader LABTECH PROMPT
No Calibration
Calibration item Range CMC Range CMC Range CMC
field
04 Thermal Glass thermometer  ‐40 to 200°C 0.06 °C   ‐30°C to 660°C 0.25 °C
25 to 650 °C  0.06 °C 
Prop thermometer,  ‐40 to 200°C 0.06 °C 0 to 250°C 0.11°c ‐30°C to 660°C 0.25 °C
switch  gauge,  25 to 650 °C  0.06 °C  /0.01 ° c 
transmitter 
Controllers,  ‐40 to  0.06 °C ‐30 to 1600°C 0.02°C ‐30°C to 660°C 0.25 °C
  200ºC/0.01ºC  0.06 °C  /0.01°C   
  25 to  ‐200 to 850°C  0.1°C 
650ºC/0.01ºC
  /0.01°C   
   
   
Temperature  ‐40 to 400°C 0.13°C
blocks  /0.1°C   
Up to 1000°C  1.20°C 
/0.1°C 
Thermocouple  ‐20 to 150°C  0.06 °C ‐200 to  0.1° C ‐250°C to 1372°C 0.46 °C
Indicators   /0.01°C    1700°C 
Type K      /0.01° C 
‐40  to 650°C  0.06 °C 
/0.01°C 
 

53 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
Laboratory Al Bader LABTECH PROMPT
No Calibration Calibration
Range CMC Range CMC Range CMC
field item
04 Thermal Thermocouple  ‐210 to  0.5ºC ‐200 to  0.1° C ‐210°C to  0.46°C
Indicators   1200ºC/0.01ºC 1700°C  1200°C 
Type J  /0.01° C 
Thermocouple  ‐270 to  0.5ºC ‐200 to  0.1° C ‐250°C to  0.46°C
Indicators   400ºC/0.01ºC 1700°C  400°C 
Type T  /0.01° C 
Thermocouple  ‐50 to  0.5ºC ‐200 to  0.1° C 0°C to  0.46°C
Indicators   1768ºC/0.01ºC 1700°C  1767°C 
Type R  /0.01° C 
Thermocouple  ‐50 to  0.5ºC ‐200 to  0.1° C 0°C to  0.46°C
Indicators   1768ºC/0.01ºC 1700°C  1767°C 
Type S  /0.01° C 
Thermocouple  ‐270 to  0.5ºC ‐200 to  0.1° C ‐200°C to  0.46°C
Indicators   1300ºC/0.01ºC 1700°C  1300°C 
Type N  /0.01° C 
Thermocouple  ‐270 to  0.5ºC ‐200 to  0.1° C ‐250°C to  0.46°C
Indicators   1000ºC/0.01ºC 1700°C  1000°C 
Type E  /0.01° C 
Non –contact  ‐60 °C to  1° C  
surface  200°C/0.1°C   
thermometer  200°C to  1.5° C 
/ IR  500°C/1°C 
thermometer 
Contact type  0° C to 100°  0.05° C   
thermometer  C/0.01° C 
 

54 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
 

Laboratory Al Bader LABTECH PROMPT

No Calibration Calibration
Range CMC Range CMC Range CMC
field item
04 Thermal Ovens  Up to 650°C 0.08°C 30 to 250°C 0.70 ° C  ‐195°C to  0.63°C
freezers  ‐40°C to 40°C  0.08°C      419°C 
Fridge      0 to 20°C /0.1°C  0.70 °C 
incubators 
Up To 100°C  0.07°C  0 TO 90 °C  0.70°C  
  
Liquid  Up to 650ºC 0.08°C 5 to 95 °C 0.32°C   
baths  /0.1°C 
Muffle  Up to 0.75°C 300 to 1000°C 1.20°C   
furnaces  1200ºC/1ºC
Humidity  0% R.H to 95%  3% R.H  
equipment R.H 
05 Volume Pipette,  5 to  3.1µL  
micropipette  1000µL/0.1µL   
1mL to  5.66mL 
2000mL/0.1mL   
 

55 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
Laboratory Al Bader LABTECH PROMPT
No Calibration Calibration
Range CMC Range CMC Range CMC
field item
06 Dimensional Calipers  0 to  12µm  0 to  0.007 mm  0 mm to 300mm  9.0µm 
300mm/0.01    150mm  0 mm to 300mm  17.8 µm 
mm    /0.01mm 
>300 to  13µm 
600mm/0.01 
mm 
Micrometers  0to150mm/0.0 1.4µm  0 to 25  0.007 mm  0 mm to 150  6.0 µm 
01mm    mm  mm  1.9µm 
>150to300mm 6.8µm  /0.001  0 mm to 150 
/0.01mm    mm  mm 
>300 to   
600mm/0.01m 7.8µm 
m 
Height gages‐ 0 to  8 µm      0 mm to 600mm  11.0µm 
length  300mm/0.01        0 mm to 600mm  15.0µm 
Dial  mm    0 to 100  0.0002 mm   
Digital   >300 to  13µm  mm   
Vernier  600mm/0.01  /0.001   
mm  mm 
Gage blocks‐            
length 
Cylindrical  Up to 10mm  3.2µm  0.5to  0.0012 mm     
gage ‐plugs  Up to 150mm  3.5µm  300mm 
and pins 
Thread plug     
gages 
Pitch 
diameter 
Major 
diameter 

56 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
 
Laboratory Al Bader LABTECH PROMPT  
No
Calibration Calibration
Range CMC Range CMC Range CMC  
field item
06 Dimensional Ring gauges‐ 0 to 200  0.0002m    
cylindrical  mm  m    
&tapered     
Bore gauge  Up to 2mm 7µm
Length     
indicators 
Length    0 to 5000  0.12 mm     
standard    mm   
    /0.5 mm  0.12 mm 
Metal  tape  0mm to  0.6 µm  0 to 50000 
measure  1000mm    mm /0.5 
/0.5mm  1.7 mm mm 
0mm to 
5000mm 
/1mm 
Coating  Up  1.4 µm         
thickness  to1507.15µm  1 µm
Up to 1503.5 
µm 
Surface plates     
flatness 
Thickness  Up to  7µm  0 to 100  0.0002  0 mm to 5 mm  1.0 µm 
gauge  50mm/0.01    mm /0.001  mm  0 mm to 25 mm  5.9 µm 
  mm    mm    0 mm to 50 mm  6.0 µm 
Feeler gauge    3.3µm 0.02 to  0.0011  0.01 mm to 2.0  2.7 µm 
Up to 2 mm 1mm  mm  mm 
 
Angle(Square,  Up to 360  40 ‘         
Right, Bevel,  Degree 
Protector) 

57 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
Laboratory Al Bader LABTECH PROMPT
No Calibration
Calibration field Range CMC Range CMC Range CMC
item
07 Optical Optical power             
measure 
(6 to 60)Db 
(10 to 110)dB 
(10 to 110)dB 
Optical             
wavelength 
measure 
Fiber Optical             
wavelength 
measure 
08 Time/frequency Stopwatch/timer   Up to24h /0.01  0.3 sec         
sec 
Rotational speed/  1 to 11000  2.5 rpm   
Tachometer   rpm/1rpm 
  
Vibration  200 m/s²  2.5 m/ s²   
Acceleration  200 m/s  3 mm/s 
Velocity 
09 Radiation Nuclear density  1775.4 kg/mᶟ 0.3 %  
gauge ‐ density  2101.5kg/mᶟ  1.3 % 
2143.1 kg/mᶟ  1.1 % 
2174.3 kg/mᶟ  1 % 
2179.1 kg/mᶟ  1.2% 
2188.8 kg/mᶟ  1% 
2226.8 kg/mᶟ  0.3 % 
2685.7 kg/mᶟ  0.3% 
Nuclear density  531.2 kg/mᶟ 4%  
gauge ‐ moisture  546.5 kg/mᶟ  4.5% 
549.5 kg/mᶟ  4% 
564.3 kg/mᶟ  1.3% 
566.9 kg/mᶟ  4.9% 
592.5 kg/mᶟ  4.1% 
 
58 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
 

Laboratory Al Bader LABTECH PROMPT

No Calibration Calibration
Range CMC Range CMC Range CMC
field item
10 Electrical DC voltage  0.001 mV to  0.00059%  100 mV  0.0024 mV  0  µA to 329.999 µA  0.04% RDG 
generate  329.9999mV    1V  0.0000036V  0 mA to 3.29999 mA  0.02%RDG 
/01µV    10 V  0.00006V  0 mA to 32.9999 mA  0.06% RDG 
0.00001 V to  0.00065%  100V  0.0008V  0 mA to 329.999 mA  0.02% RDG 
3.299999V/1µV    1000 V  0.0017 V  0 A to 1.09999 A  0.06% RDG 
0.00001 V to  0.00050%  1.1 A to 2.99999 A  0.11% RDG 
32.99999V/10µV    0 A to 10.9999 A  0.08% RDG 
30 V to  0.00043%  11 A to 20.5 A  0.08% RDG 
329.9999V/100µV    300 A to 1000 A  0.5% RDG 
100V to 1020.0V/1000µV  0.00040% 
DC voltage  30.003 mV to 100  0.84%  100 mV  0.0024 mV  100 mV  0.006% RDG 
measure   mV/100 mV    1V  0.0000036V  1 V  0.006% RDG 
0.006 mV to 1V/1µV  0.37%  10 V  0.00006V  10 V  0.02% RDG 
0.004 V to 10V/10µV  0.33%  100V  0.0008V  100 V  0.02% RDG 
0.006 V to 100V  0.51%  1000 V  0.0017 V  1000 V  0.02% RDG 
/100µV     
0.006 V to 1000V/1mV  0.59%   

Resistance  0.03 Ω to 10Ω/10µΩ  0.35%  0 Ω to 10 Ω  0.006 Ω  10 Ω  0.36% RDG 

measure  3.003 Ω to 100Ω/100µΩ  0.0074%  0 Ω to 100 Ω  0.06  Ω  100 Ω  0.23% RDG 
0.05 kΩ to 1kΩ/1mΩ  0.0015%  0 Ω to 1000 Ω  0.6  Ω  1 kΩ  0.23% RDG 
0.05 kΩ to 10kΩ/10 mΩ  0.0019%  0 Ω to 10 kΩ  0.006 kΩ  10 kΩ  0.73% RDG 
0.05 kΩ to100kΩ/100mΩ  0.0014%  0 Ω to 100 kΩ  0.06  kΩ  100 kΩ  0.73% RDG 
0.01 MΩ to 1MΩ/1Ω  0.0012%  0 Ω to 1000 kΩ  0.6  kΩ  1MΩ  0.73% RDG 
0.01 MΩ to 10MΩ/10Ω  0.0019%  0 Ω to 10 MΩ  0.006 MΩ  10 MΩ  0.73% RDG 
0.4 MΩ to 100MΩ/100Ω  0.0002%  0 Ω to 100 MΩ  0.065  MΩ  100 MΩ  1.37% RDG 
1.01 GΩ to 1GΩ/1kΩ  0.0043%  0 Ω to 1 GΩ  0.0006 GΩ  1.0 GΩ  1.37% RDG 
   
 
 

 
59 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
  
‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬ 
     
Laboratory Al Bader LABTECH PROMPT
No Calibration Calibration
Range CMC Range CMC Range CMC
field item
11 Sound Sound Level  94 dB and 114 dB  0.6 dB         
Meters 

60 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                         QSD/LL/CA/V12/2018
                             
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
15. Approved Site Laboratories
S.NO Laboratory Project Field Test Standard
1 ACES Roads 1. Soil Tests
(*)Particle Size Distribution BS 1377
&Infrastructure
(Wet Sieving Method) Part 2: Sec. 9.2
In Doha
Industrial Area-
Package - 01 (*)Particle Size Distribution BS 1377
(Dry Sieving Method) Part 2: Sec. 9.3

(*)Dry Density/Moisture Content BS 1377

Relationship Part 4 :Sec.3.5/3.6

(*)In-Situ Density Test

BS 1377
(Sand Replacement Method –
Part 9: Sec. 2.2
Large Pouring Cylinder)

(*)Determination of California BS 1377

Bearing Ratio (CBR) Part4: Sec. 7

(*)Sand Equivalent Value ASTM D2419

(*)Determination of Moisture BS 1377

Content (Oven Drying) Part 2: Sec. 3.2

(*)Determination of Liquid Limit BS 1377

(Cone Penetrometer) Part 2: Sec. 4.3

(*)Determination of Liquid Limit BS 1377

(Casagrande Method) Part 2: Sec. 4.5

(*)Determination of Plastic Limit BS 1377

and Plasticity Index Part 2: Sec. 5

61 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
1  ACES Roads 2. Concrete Tests (*)Making and Curing of Specimen BS EN 12390
&Infrastructure for Strength Test Part 2
In Doha BS EN 12350
(*)Sampling of Fresh Concrete
  Industrial Area- Part 1
Package - 01  (*)Test for Temperature of Fresh
ASTM C1064
Concrete
BS EN 12390
(*)Density of Hardened Concrete
Part 7
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
BS EN 12350
(*)Slump Test
Part 2
3. Asphalt Tests (*)Quantitative Extraction of
  Bitumen from Bituminous Paving ASTM D2172
Mixtures
(*)Maximum Specific Gravity and
ASTM D2041
Density
(*)Sampling of Bituminous
ASTM D979
Mixtures
(*)Sampling Compacted
Bituminous Mixtures for ASTM D5361
Laboratory Testing
(*)Preparation of Specimens Using
ASTM D6926
Marshall Apparatus
(*)Mechanical Size Analysis of
ASTM D5444
Extracted Aggregate
(*)Marshall Stability and Flow of
ASTM D6927
Bituminous Mixtures
(*)Bulk Specific Gravity and
ASTM D2726
Density
(*)Thickness of Asphalt Specimen ASTM D3549

62 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard

2 ACES New Orbital 1. Soil Tests (*)Particle Size Distribution BS 1377

Highway – truck (Wet Sieving Method) Part 2: Sec. 9.2
route-P0234-C03 (*)Particle Size Distribution BS 1377
(Dry Sieving Method) Part 2: Sec. 9.3
(*)Dry Density/Moisture Content BS 1377
Relationship Part 4 :Sec.3.5/3.6
(*)In-Situ Density Test BS 1377
(nuclear gauge Method Part 9: Sec. 2.5
(*)Determination of California BS 1377
Bearing Ratio (CBR) Part4: Sec. 7

(*)Sand Equivalent Value ASTM D2419

(*)Determination of Moisture BS 1377

Content (Oven Drying) Part 2: Sec. 3.2

(*)Determination of Liquid Limit BS 1377

(Casagrande Method) Part 2: Sec. 4.5
(*)Determination of Plastic Limit BS 1377
and Plasticity Index Part 2: Sec. 5

(*)Method of Test for Cement BS 1924

Stabilized Materials Part 2
2. Asphalt Tests (*)Bulk Specific Gravity and
ASTM D2726
Density
(*)Quantitative Extraction of
Bitumen from Bituminous ASTM D2172
Paving Mixtures
(*)Application Rate of
ASTM D2995
Bituminous Distributors
(*)Sampling Compacted
Bituminous Mixtures for ASTM D5361
Laboratory Testing

63 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
2  ACES New Orbital 2.Asphalt Tests  (*)Sampling of Bituminous
Highway – truck ASTM D979
Mixtures
route-P0234-C03 
(*)Maximum Specific Gravity and ASTM D2041
Density

(*)Preparation of Specimens
ASTM D6926
Using Marshall Apparatus

(*)Marshall Stability and Flow of

ASTM D6927
Bituminous Mixtures
(*)Mechanical Size Analysis of
ASTM D5444
Extracted Aggregate
(*)Thickness of Asphalt
ASTM D3549
Specimen
   

64 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
3 ACES Design & 1. Concrete Tests (*)Sampling of Fresh BS EN 12350
Construction Of Al Concrete Part 1
Bustan Street North BS EN 12350
(*)Slump Test
(P007-C7 P2) Part 2
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
(*)Density of Hardened BS EN 12390
Concrete Part 7
(*)Obtaining and Testing of BS EN 12504
Drilled Cores Part 1
2. Asphalt Tests (*)Sampling of Bituminous
ASTM D979
Mixtures
(*)Sampling Compacted
Bituminous Mixtures for ASTM D5361
Laboratory Testing
(*)Bulk Specific Gravity and
ASTM D2726
Density
(*)Maximum Specific Gravity
ASTM D2041
and Density
(*)Quantitative Extraction of
Bitumen from Bituminous ASTM D2172
Paving Mixtures
(*)Mechanical Size Analysis
ASTM D5444
of Extracted Aggregate
(*)Preparation of Specimens
ASTM D6926
Using Marshall Apparatus
(*)Marshall Stability and Flow
ASTM D6927
of Bituminous Mixtures
(*)Thickness of Asphalt
ASTM D3549
Specimen

65 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
3 ACES Design & 3. Soil Tests
(*)Particle Size Distribution ASTM D6913
Construction Of Al
Bustan Street North (*)Materials Finer than No.
ASTM D1140
(P007-C7 P2) 200 (0.075mm) Sieve
(*)Liquid Limit, Plastic Limit
and Plasticity Index of Soil ASTM D4318

(*)Lab Compaction Test using

ASTM D1557
Modified Effort
(*)Correction of Density and
ASTM D4718
Water Content for Soils
(*)Determination of California
ASTM D1883
Bearing Ratio (CBR)
(*)Determination of Moisture
ASTM D2216
Content
(*)Field Density (Sand Cone) ASTM D1556
(*)Sand Equivalent Value ASTM D2419
4. Aggregate Tests (*)Sampling of Aggregates ASTM D75
(*)Reducing Samples to
ASTM C702
Testing Size
(*)Sampling of Aggregates BS 812
(From Heaps) Part 102
(*)Particle Size Distribution ASTM C136
(*)Material Finer than 0.075
ASTM C117
mm
(*)Determination of Specific
Gravity and Water Absorption ASTM C128
of Fine Aggregate
(*)Determination of Specific
Gravity and Water Absorption ASTM C127
of Coarse Aggregate
(*)Flat and Elongated
ASTM D4791
Particles

66 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
3 ACES Design & 4.Aggregate Tests (*)Clay Lumps and Friable
ASTM C142
Construction Of Al Particles
Bustan Street North BS EN 933
(*)Flakiness Index
(P007-C7 P2) Part 3
(*)Material Finer than 0.063 BS EN 933
mm Part 1
(*)Determination of Shell BS EN 933
Content Part 7
(*)Determination of Aggregate BS 812
Crushing Value Part 110
(*)Determination of Ten BS 812
Percent Value Part 111
(*)Determination of Particle
BS EN 1097
Density and Water
Part 6
Absorption
(*)Magnesium Sulphate
ASTM C88
Soundness
 

67 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
 

S.NO Laboratory Project Field Test Standard

4 ACES Al Khore Expressway 1. Asphalt Tests  (*)Sampling of Bituminous
(16-031)  ASTM D979
Mixtures
(*)Sampling Compacted
Bituminous Mixtures for ASTM D5361
Laboratory Testing
(*)Preparation of Specimens
ASTM D6926
Using Marshall Apparatus

(*)Bulk Specific Gravity and

ASTM D2726
Density

(*)Maximum Specific Gravity

ASTM D2041
and Density

(*)Thickness of Asphalt
ASTM D3549
Specimen

(*)Marshall Stability and Flow

ASTM D6927
of Bituminous Mixtures
(*)Quantitative Extraction of
Bitumen from Bituminous ASTM D2172
Paving Mixtures
(*)Mechanical Size Analysis
ASTM D5444
of Extracted Aggregate

(*)Application Rate of
ASTM D2995
Bituminous Distributors
 

68 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
5 ACES Construction and 1. Aggregate Tests 
(*)Sampling of Aggregates ASTM D75
upgrade of
Mesaimeer Road (*)Reducing Samples to
ASTM C702
(P008-C3) Testing Size
(*)Sampling of Aggregates BS 812
(From Heaps) Part 102
(*)Particle Size Distribution ASTM C136

(*)Material Finer than 0.075

ASTM C117
mm
(*)Determination of Specific
Gravity and Water Absorption ASTM C128
of Fine Aggregate
(*)Determination of Specific
Gravity and Water Absorption ASTM C127
of Coarse Aggregate
(*)Flat and Elongated
ASTM D4791
Particles
(*)Clay Lumps and Friable
ASTM C142
Particles
(*)Material Finer than 0.063 BS EN 933
mm Part 1
(*)Determination of Shell BS EN 933
Content Part 7
(*)Determination of BS 812
Aggregate Crushing Value Part 110
(*)Determination of Ten BS 812
Percent Value Part 111
(*)Sieve Analysis of Mineral
ASTM D546
Filler

69 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
5 ACES Construction and 2. Soil tests (*)Particle Size Distribution ASTM D6913
upgrade of
Mesaimeer Road (*)Materials Finer than No.
ASTM D1140
(P008-C3) 200 (0.075mm) Sieve
(*)Liquid Limit, Plastic Limit
ASTM D4318
and Plasticity Index of So
(*)Lab Compaction Test using
ASTM D1557
Modified Effort
(*)Correction of Density and
ASTM D4718
Water Content for Soils
(*)Determination of California
ASTM D1883
Bearing Ratio (CBR)
(*)Determination of Moisture
ASTM D2216
Content
(*)Field Density (Sand Cone) ASTM D1556
(*)Sand Equivalent Value ASTM D2419
3. Asphalt tests (*)Sampling of Bituminous
ASTM D979
Mixtures
(*)Sampling Compacted
Bituminous Mixtures for ASTM D5361
Laboratory Testing
(*)Preparation of Specimens
ASTM D6926
Using Marshall Apparatus
(*)Bulk Specific Gravity and
ASTM D2726
Density
(*)Maximum Specific Gravity
ASTM D2041
and Density
(*)Thickness of Asphalt
ASTM D3549
Specimen
(*)Marshall Stability and Flow
ASTM D6927
of Bituminous Mixtures
(*)Quantitative Extraction of
Bitumen from Bituminous ASTM D2172
Paving Mixtures

70 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 

S.NO Laboratory Project Field Test Standard

5 ACES Construction and 3.Asphalt tests (*)Mechanical Size Analysis
ASTM D5444
upgrade of of Extracted Aggregate
Mesaimeer Road (*)Application Rate of
ASTM D2995
(P008-C3) Bituminous Distributors
4. Concrete tests (*)Sampling of Fresh BS EN 12350
Concrete Part 1
BS EN 12350
(*)Slump Test
Part 2
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
(*)Density of Hardened BS EN 12390
Concrete Part 7
(*)Obtaining and Testing of BS EN 12504
Drilled Cores Part 1
 

   

71 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 

S.NO
Laboratory Project Field Test Standard
6 Tech-Lab Construction
and Upgrade of 1.Soil Tests (*)Determination of Moisture BS 1377
Rayyan Road Content (Oven Drying) Part 2: Sec. 3.2
Project
(Code:007,C2) (*)Particle Size Distribution BS 1377
(Wet Sieving Method) Part 2: Sec. 9.2

(*)Particle Size Distribution BS 1377

(Dry Sieving Method) Part 2: Sec. 9.3

(*)Dry Density/Moisture BS 1377

Content Relationship Part 4 :Sec.3.5/3.6

(*)Determination of Liquid BS 1377

Limit (Cone Penetrometer) Part 2: Sec. 4.3

(*)Determination of Plastic BS 1377

Limit and Plasticity Index Part 2: Sec. 5

(*)Determination of California BS 1377

Bearing Ratio (CBR) Part4: Sec. 7
(*)In-Situ Density Test
BS 1377
(Sand Replacement Method –
Part 9: Sec. 2.2
Large Pouring Cylinder)
(*)In-Situ Density Test
BS 1377
(Nuclear Gauge Method)
Part 9: Sec. 2.5

(*)In-Situ Density Test

ASTM D 6938
(Nuclear Gauge Method)

72 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
6 Tech-Lab Construction 1.Soil Tests (*)Reducing Samples to
ASTM C702
and Upgrade of Testing Size
Rayyan Road
(*)Sand Equivalent Value ASTM D2419
Project
(Code:007,C2) (*)Determination of Plastic
Limit, Liquid Limit and ASTM D4318
Plasticity Index
(*)Determination of Moisture
ASTM D2216
Content
(*)Particle Size Distribution ASTM D6913
(*)Materials Finer than No. 200
ASTM D1140
(0.075mm) Sieve
(*)Sampling of Aggregates BS 812
2.Aggregate Tests (From Heaps) Part 102
(*)Sampling of Aggregates ASTM D75
(*)Particle Size Distribution BS 812
(Wet) Part 103.1-9.2
BS EN 933
(*)Particle Size Distribution
Part 1
(*)Particle Density and Water
BS 812
Absorption (All larger than
Part 2–5.3
10mm aggregate)
(*)Determination of Particle BS EN 1097
Density and Water Absorption Part 6
(*)Particle Density and Water
BS 812
Absorption (5-40mm
Part 2–5.4
aggregate)
 

73 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
6 Tech-Lab Construction 2.Aggregate Tests (*)Particle Density and Water
BS 812
and Upgrade of Absorption (10mm aggregate
Part 2–5.5
Rayyan Road and smaller)
Project (*)Determination of Aggregate BS 812
(Code:007,C2) Crushing Value Part 110
(*)Determination of Ten BS 812
Percent Value Part 111
(*)Clay Lumps and Friable
ASTM C142
Particles
(*)Material Finer than 0.075
ASTM C117
mm
(*)Determination of Specific
Gravity and Water Absorption ASTM C127
of coarse Aggregate.
(*)Determination of Specific
Gravity and Water Absorption ASTM C128
of Fine Aggregate
(*)Material Finer than 0.063 BS EN 933
mm Part 1
(*)Determination of Shell BS EN 933
Content Part 7
(*)Determination of Moisture BS 812
Content (Oven Drying) Part 109: Sec.6
(*)Percentage of Fractured
ASTM D5821
Particles
(*)Magnesium Sulphate
ASTM C88
Soundness
(*)Making and Curing of BS EN 12390
3.Concrete Tests Specimen for Strength Test Part 2
BS EN 12350
(*)Slump Test
Part 2
(*)Density of Hardened BS EN 12390
Concrete Part 7

74 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
6 Tech-Lab Construction 3.Concrete Tests (*)Shape and Dimensions of BS EN 12390
and Upgrade of Specimen Part 1
Rayyan Road (*)Test for Temperature of
ASTM C1064
Project Fresh Concrete
(Code:007,C2 (*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
BS EN 12390
(*)Water Penetration Test
Part 8
(*)Resistance to Chloride Ion
ASTM C1202
Penetration
BS 1881
(*)Water Absorption Test
Part 122
 

75 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
7 Tech-Lab  Design & 1. Soil Tests (*)Reducing Samples to
ASTM C702
Construction of Testing Size
Al Khor (*)Determination of Moisture
Expressway ASTM D2216
Content
project code 16-
031  (*)Particle Size Distribution ASTM D6913
(*)Determination of Plastic
Limit, Liquid Limit and ASTM D4318
Plasticity Index
(*)Lab Compaction Test using
ASTM D1557
Modified Effort
(*)Correction of Density and
ASTM D4718
Water Content for Soils
(*)Field Density (Sand Cone) ASTM D1556

(*)Field Density (Nuclear) ASTM D6938

(*)Determination of California
ASTM D1883
Bearing Ratio (CBR)
(*)Sand Equivalent Value ASTM D2419
(*)Determination of Moisture BS 1377
Content (Oven Drying) Part 2: Sec. 3.2
(*)Particle Size Distribution BS 1377
(Wet Sieving Method) Part 2: Sec. 9.2
(*)Particle Size Distribution BS 1377
(Dry Sieving Method) Part 2: Sec. 9.3
(*)Dry Density/Moisture BS 1377
Content Relationship Part 4 :Sec.3.5/3.6

(*)Determination of Liquid BS 1377

Limit (Cone Penetrometer) Part 2: Sec. 4.3

76 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
7 Tech-Lab  Design & 1. Soil Tests (*)Determination of Plastic BS 1377
Construction of Limit and Plasticity Index Part 2: Sec. 5
Al Khor (*)Determination of California BS 1377
Expressway Bearing Ratio (CBR) Part4: Sec. 7
project code 16- (*)In-Situ Density Test
BS 1377
031  (Sand Replacement Method -
Part 9: Sec. 2.1
Small Pouring Cylinder)
(*)In-Situ Density Test
BS 1377
(Sand Replacement Method –
Part 9: Sec. 2.2
Large Pouring Cylinder)
(*)In-Situ Density Test BS 1377
(Nuclear Gauge Method) Part 9: Sec. 2.5
(*)In Place Moisture Content
ASTM D4944
(Calcium Carbide Tester)
(*)California Bearing Ratio BS 1377
(CBR) Test Part 9-Sec. 4.3
2.Aggregate Tests (*)Sampling of Aggregates ASTM D75
(*)Sampling of Aggregates BS 812
(From Heaps) Part 102
(*)Particle Size Distribution ASTM C136
(*)Material Finer than 0.075
ASTM C117
mm
(*)Determination of Specific
Gravity and Water Absorption ASTM C128
of Fine Aggregate
(*)Determination of Specific
Gravity and Water Absorption ASTM C127
of Coarse Aggregate
(*)Magnesium Sulphate
ASTM C88
Soundness
(*)Determination of Moisture BS 812
Content (Oven Drying) Part 109: Sec.6
(*)Determination of Particle BS EN 1097
Density and Water Absorption Part 6

77 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
7 Tech-Lab Design & 2.Aggregate Tests (*)Particle Density and Water
BS 812
Construction of Absorption (All larger than
Part 2–5.3
Al Khor 10mm aggregate)
Expressway (*)Particle Density and Water
BS 812
Absorption (5-40mm
project code 16- Part 2–5.4
aggregate)
031
(*)Particle Density and Water
BS 812
Absorption (10mm aggregate
Part 2–5.5
and smaller)
BS EN 933
(*)Particle Size Distribution
Part 1
(*)Particle Size Distribution BS 812
(Wet) Part 103.1-7.2
(*)Particle Size Distribution BS 812
(Dry) Part 103.1-7.3
(*)Material Finer than 0.075 BS EN 933
mm Part 1
(*)Material Finer than 0.063 BS EN 933
mm Part 1
(*)Determination of Shell BS EN 933
Content Part 7
(*)Determination of Aggregate BS 812
Crushing Value Part 110
(*)Determination of Ten BS 812
Percent Value Part 111
3.Concrete tests BS EN 12350
(*)Sampling of Fresh Concrete
Part 1
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2
BS EN 12350
(*)Slump Test
Part 2
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1

78 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
7 Tech-Lab Design & 3.Concrete tests (*)Test for Temperature of
ASTM C1064
Construction of Fresh Concrete
Al Khor (*)Compressive Strength of BS EN 12390
Expressway Concrete Specimens Part 3
project code 16- (*)Density of Hardened BS EN 12390
Concrete Part 7
031
BS EN 12390
(*)Water Penetration Test
Part 8
(*)Resistance to Chloride Ion
ASTM C1202
Penetration
BS 1881
(*)Water Absorption Test
Part 122
 

79 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
8 Gulf Labs Al Muntazah (*)Determination of
BS 1377
Street 1. Soil Tests Moisture Content (Oven
Part 2: Sec. 3.2
Extension Drying)
(Package 13) (*)Particle Size
BS 1377
Distribution
Part 2: Sec. 9.2
(Wet Sieving Method)
(*)Particle Size
BS 1377
Distribution
Part 2: Sec. 9.3
(Dry Sieving Method)
(*)Dry Density/Moisture BS 1377
Content Relationship Part 4 :Sec.3.5/3.6
(*)Determination of
BS 1377
Liquid Limit (Casagrande
Part 2: Sec. 4.5
Method)
(*)Determination of
BS 1377
Plastic Limit and
Part 2: Sec. 5
Plasticity Index
(*)In-Situ Density Test BS 1377
(Nuclear Gauge Method) Part 9: Sec. 2.5
(*)Determination of
BS 1377
California Bearing Ratio
Part4: Sec. 7
(CBR)
(*)Determination of
BS 812
2. Aggregate Tests Moisture Content (Oven
Part 109: Sec.6
Drying)
(*)Sampling of
BS 812
Aggregates (From
Part 102
Heaps)
(*)Particle Size BS 812
Distribution (Wet) Part 103.1-9.2

80 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
8 Gulf Labs Al Muntazah (*)Particle Density and Water
BS 812
Street 2. Aggregate Tests Absorption (10mm aggregate
Part 2–5.5
Extension and smaller)
(Package 13) (*)Particle Density and Water
BS 812
Absorption (5-40mm
Part 2–5.4
aggregate)
(*)Determination of Specific
Gravity and Water
ASTM C128
Absorption of Fine
Aggregate
ASTM
(*)Los Angeles Abrasion C131/ASTM
C535
BS 812
(*)Flakiness Index
Part 105.1

BS 812
(*)Elongation Index
Part 105.2

(*)Compressive Strength of BS EN 12390

3. Concrete Tests Concrete Specimens Part 3
(*)Density of Hardened BS EN 12390
Concrete Part 7
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Sampling of Fresh BS EN 12350
Concrete Part 1
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2
BS EN 12350
(*)Slump Test
Part 2

81 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
 

S.NO Laboratory Project Field Test Standard

9 Gulf Labs West Corridor (*)In-Situ Density Test BS 1377
P-010 (Package 1. Soil Tests (Nuclear Gauge Method) Part 9: Sec. 2.5
1)
(*)Compressive Strength of BS EN 12390
2. Concrete Tests Concrete Specimens Part 3

(*)Density of Hardened BS EN 12390

Concrete Part 7

(*)Shape and Dimensions of BS EN 12390

Specimen Part 1

(*)Sampling of Fresh BS EN 12350

Concrete Part 1

(*)Test for Temperature of BS EN 12350

Fresh Concrete Part 1

(*)Making and Curing of BS EN 12390

Specimen for Strength Test Part 2

BS EN 12350
(*)Slump Test
Part 2

(*)Air Content Test for Fresh

BS EN 12350
Concrete by Pressure
Part 7
Method

BS EN 12350
(*)Flow Table Test
Part 5

82 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
9 Gulf Labs West Corridor 3. Asphalt Tests BS EN 12697
P-010 (Package (*)Sampling of Asphalt
Part 27
1)
(*)Preparation of Samples for BS EN 12697
Testing Part 28
(*)Specimen Preparation by BS EN 12697
Impact Compactor Part 30
BS EN 12697
(*)Soluble Binder Content
Part 1
BS EN 12697
(*)Marshal Test
Part 34
(*)Determination of BS EN 12697
Thickness of Specimen Part 36
BS EN 12697
(*)Temperature Measurement
Part 13
(*)Determination of Maximum BS EN 12697
Density Part 5
(*)Determination of Bulk BS EN 12697
Density Part 6
(*)Determination of BS EN 12697
Dimensions of Specimen Part 29
(*)Determination of Void BS EN 12697
Characteristics Part 8
   

83 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
 

S.NO Laboratory Project Field Test Standard

10 Gulf Labs Independent (*)Particle Size Distribution BS 1377
  site laboratory 1. Soil Tests (Wet Sieving Method) Part 2: Sec. 9.2
for New Doha BS 1377
(*)Dry Density/Moisture
port to orbital Content Relationship
Part 4
highway (P-023 :Sec.3.5/3.6
Contract 1)  (*)Determination of Liquid BS 1377
Limit (Cone Penetrometer) Part 2: Sec. 4.3
(*)Determination of Plastic BS 1377
Limit and Plasticity Index Part 2: Sec. 5
(*)Determination of
BS 1377
California Bearing Ratio
Part4: Sec. 7
(CBR)
(*)In-Situ Density Test
BS 1377
(Sand Replacement Method
Part 9: Sec. 2.2
– Large Pouring Cylinder)
(*)Determination of
ASTM D2216
Moisture Content
(*)Liquid Limit, Plastic
Limit and Plasticity Index ASTM D4318
of Soil
(*)Determination of
California Bearing Ratio ASTM D1883
(CBR)
(*)Method of Test for
BS 1924
Cement Stabilized
Part 2
Materials

(*)Compressive Strength of
ASTM D7012
Rock Core Specimen

84 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
10 Gulf Labs Independent (*)Compressive Strength of BS EN 12390
  site laboratory 2. Concrete Tests Concrete Specimens Part 3
for New Doha (*)Density of Hardened BS EN 12390
port to orbital Concrete Part 7
highway (P-023 (*)Sampling of Fresh BS EN 12350
Concrete Part 1
Contract 1) 
BS EN 12350
  (*)Slump Test
Part 2
(*)Sampling of Bituminous
ASTM D979
3.Asphalt Tests Mixtures
(*)Quantitative Extraction
ASTM D2172
of Bitumen
BS EN 12697
(*)Soluble Binder Content
Part 1
BS EN 12697
(*)Particle Size Distribution
Part 2
(*)Determination of Bulk BS EN 12697
Density Part 6
(*)Determination of BS EN 12697
Thickness of Specimen Part 36
(*)Specimen Preparation by BS EN 12697
Impact Compactor Part 30
BS EN 12697
(*)Marshal Test
Part 34
BS EN 12697
(*)Asphalt core drilling

(*)Maximum Specific
ASTM D2041
Gravity and Density
(*)Mechanical Size Analysis
ASTM D5444
of Extracted Aggregate
 

85 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
10 Gulf Labs Independent site BS EN 933
  laboratory for 4. Aggregate Tests (*)Particle Size Distribution
Part 1
New Doha port
to orbital
(*)Material Finer than 0.075 mm ASTM C117
highway (P-023
Contract 1) 
  (*)Clay Lumps and Friable
ASTM C142
Particles

(*)Flat and Elongated Particles ASTM D4791

BS EN 933
(*)Flakiness Index Part 3/ BS 812
Part 105.1
BS 812
Part 105.2/ BS
(*)Elongation Index
EN 933
Part 4
BS EN 933
(*)Determination of Shell Content
Part 7

(*)Los Angeles Abrasion ASTM C131

(*)Magnesium Sulphate
ASTM C88
Soundness

(*)Sand Equivalent Value ASTM D2419

86 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
11 Gulf Labs Dukhan Road – 1. Soil Tests (*)Determination of Moisture
ASTM D2216
  East Contract Content
(*)Particle Size Distribution ASTM D6913
(*)Lab Compaction Test using
ASTM D1557
Modified Effort
(*)Liquid Limit, Plastic Limit and
ASTM D4318
Plasticity Index of Soil
(*)Determination of California
ASTM D1883
Bearing Ratio (CBR)
(*)Sand Equivalent Value ASTM D2419
(*)Materials Finer than No. 200
ASTM D1140
(0.075mm) Sieve
(*)Determination of Moisture BS 1377
Content (Oven Drying) Part 2: Sec. 3.2
(*)Particle Size Distribution BS 1377
(Wet Sieving Method) Part 2: Sec. 9.2
(*)Particle Size Distribution BS 1377
(Dry Sieving Method) Part 2: Sec. 9.3
BS 1377
(*)Dry Density/Moisture Content
Part 4
Relationship
:Sec.3.5/3.6
(*)Determination of Liquid Limit BS 1377
(Casagrande Method) Part 2: Sec. 4.5
(*)Determination of Plastic Limit BS 1377
and Plasticity Index Part 2: Sec. 5
(*)Determination of California BS 1377
Bearing Ratio (CBR) Part4: Sec. 7

(*)In-Situ Density Test BS 1377

(Nuclear Gauge Method) Part 9: Sec. 2.5

87 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 

S.NO Laboratory Project Field Test Standard

11 Gulf Labs Dukhan Road – 1. Soil Tests (*)In-Situ Density Test

  East Contract BS 1377
(Sand Replacement Method – Large
Part 9: Sec. 2.2
Pouring Cylinder)
2. Aggregate (*)Sampling of Aggregates ASTM D75
Tests (*)Reducing Samples to Testing
ASTM C702
Size
(*)Flat and Elongated Particles ASTM D4791

(*)Particle Size Distribution ASTM C136

(*)Material Finer than 0.075 mm ASTM C117

(*)Determination of Specific Gravity
and Water Absorption of Fine ASTM C128
Aggregate
(*)Determination of Specific Gravity
and Water Absorption of Coarse ASTM C127
Aggregate

(*)Clay Lumps and Friable Particles ASTM C142

(*)Percentage of Fractured Particles ASTM D5821

(*)Uncompacted Void Content of
AASHTO T304
Fine Aggregate
(*)Sampling of Aggregates (From BS 812
Heaps) Part 102
(*)Determination of Particle Density BS EN 1097
and Water Absorption Part 6
BS EN 933
(*)Particle Size Distribution
Part 1

88 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
11 Gulf Labs Dukhan Road – 2.Aggregate Tests BS EN 933
(*)Flakiness Index
  East Contract Part 3
BS EN 933
(*)Elongation (Shape) Index
Part 4
(*)Determination of Aggregate BS 812
Crushing Value Part 110
(*)Determination of Ten Percent BS 812
Value Part 111
BS EN 933
(*)Determination of Shell Content
Part 7
BS EN 933
(*)Sand Equivalent Value
Part 8
BS 812
(*)Particle Size Distribution (Wet)
Part 103.1-7.2
(*)Determination of Aggregate BS 812
Impact Value Part 112
3.Concrete Tests (*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
BS EN 12390
(*)Density of Hardened Concrete
Part 7
BS EN 12350
(*)Sampling of Fresh Concrete
Part 1
(*)Making and Curing of Specimen BS EN 12390
for Strength Test Part 2
BS EN 12350
(*)Slump Test
Part 2
(*)Obtaining and Testing of Drilled BS EN 12504
Cores Part 1
BS 1881
(*)Water Absorption Test
Part 122
(*)Slump Test ASTM C143

89 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field  
11 Gulf Labs Dukhan Road – 3.Concrete Tests (*)Test for Temperature of Fresh
ASTM C1064
  East Contract Concrete
(*)Making and Curing of Concrete
ASTM C31
Tests Specimen
4.Asphalt Tests (*)Sampling of Bituminous Mixtures ASTM D979
(*)Sampling Compacted Bituminous
ASTM D5361
Mixtures for Laboratory Testing
(*)Maximum Specific Gravity and
ASTM D2041
Density
(*)Bulk Specific Gravity and Density ASTM D2726
(*)Density of Bituminous Concrete
ASTM D2950
in Place by Nuclear Methods
(*)Sieve Analysis of Mineral Filler ASTM D546
(*)Preparation of Specimens Using
ASTM D6926
Marshall Apparatus
(*)Marshall Stability and Flow of
ASTM D6927
Bituminous Mixtures
(*)Bulk Specific Gravity and Density
ASTM D1188
Using Coated Samples
(*)Thickness of Asphalt Specimen ASTM D3549
(*)Quantitative Extraction of
Bitumen from Bituminous Paving ASTM D2172
Mixtures
(*)Application Rate of Bituminous
ASTM D2995
Distributors
BS EN 12697
(*)Sampling of Asphalt
Part 27
(*)Preparation of Samples for BS EN 12697
Testing Part 28
Specimen
BS EN 12697
(*)Preparation by Impact Compactor
Part 30
BS EN 12697
(*)Soluble Binder Content
Part 1

90 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
11 Gulf Labs Dukhan Road – 4.Asphalt Tests BS EN 12697
(*)Particle Size Distribution
  East Contract Part 2
(*)Determination of Dimensions of BS EN 12697
Specimen Part 29
(*)Determination of Maximum BS EN 12697
Density Part 5
BS EN 12697
(*)Determination of Bulk Density
Part 6
(*)Determination of Void BS EN 12697
Characteristics Part 8
(*)Determination of Reference BS EN 12697
Density Part 9
BS EN 12697
(*)Temperature Measurement
Part 13
(*)Determination of Thickness of BS EN 12697
Specimen Part 36
BS EN 12697
(*)Marshal Test
Part 34
BS EN 12697
(*)Laboratory Mixing
Part 35
 

91 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 

S.NO Laboratory Project Field Test Standard

12 Doha technical P003-LUSAIL 1. Soil Tests
laboratories Expressway (*)Particle Size Distribution BS 1377
(Wet Sieving Method) Part 2: Sec. 9.2

BS 1377
(*)Dry Density/Moisture Content
Part 4
Relationship
:Sec.3.5/3.6

(*)Determination of Liquid Limit BS 1377

(Cone Penetrometer) Part 2: Sec. 4.3

(*)Determination of Plastic Limit BS 1377

and Plasticity Index Part 2: Sec. 5

(*)Determination of California BS 1377

Bearing Ratio (CBR) Part4: Sec. 7

2. Aggregate Tests (*)Sampling of Aggregates BS 812

(From Heaps) Part 102

BS EN 932
(*)Sampling of Aggregates
Part 1
3. Concrete Tests
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2

BS EN 12350
(*)Slump Test
Part 2
BS EN 12350
(*)Sampling of Fresh Concrete
Part 1

92 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
 

S.NO Laboratory Project Field Test Standard

12 Doha technical P003-LUSAIL 3. Concrete Tests

(*)Slump Test ASTM C143
laboratories Expressway

(*)Air Content Test for Fresh

ASTM C231
Concrete by Pressure Method

(*)Density Determination for

ASTM C138
Fresh Concrete

(*)Shape and Dimensions of BS EN 12390

Specimen Part 1

(*)Test for Temperature of

ASTM C1064
Fresh Concrete

(*)Compressive Strength of BS EN 12390

Concrete Specimens Part 3

93 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 

S.NO Laboratory Project Field Test Standard

13  Doha technical DBOM Of Al Dhakira 1. Concrete Tests  BS EN 12350

laboratories sewage treatment (*)Sampling of Fresh Concrete
Part 1
  works- IA-D 13/14
(*)Making and Curing of BS EN 12390
DCOM 03 G - CP-652  Specimen for Strength Test Part 2
BS EN 12350
(*)Slump Test
Part 2
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
BS EN 12390
(*)Density of Hardened Concrete
Part 7
BS EN 12390
(*)Water Penetration Test
Part 8
BS 1881
(*)Water Absorption Test
Part 122
(*)Initial Surface Absorption BS 1881
(ISAT) Part 208
(*)Obtaining and Testing of BS EN 12504
Drilled Cores Part 1
(*)Chloride Penetration Test NT Build 492

(*)Obtaining and Testing of

ASTM C42
Drilled Cores and Sawed Beams
(*)Resistance to Chloride Ion
ASTM C1202
Penetration
   

94 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
14  Doha technical Roads and 1. Asphalt Tests (*)Sampling of Bituminous
ASTM D979
laboratories infrastructure of Mixtures
  Doha Industrial Area - (*)Sampling Compacted
Package 03-C299 Bituminous Mixtures for ASTM D5361
Laboratory Testing
(*)Preparation of Specimens
ASTM D6926
Using Marshall Apparatus
(*)Bulk Specific Gravity and
ASTM D2726
Density
(*)Maximum Specific Gravity and
ASTM D2041
Density
(*)Thickness of Asphalt
ASTM D3549
Specimen
(*)Marshall Stability and Flow of
ASTM D6927
Bituminous Mixtures
(*)Quantitative Extraction of
Bitumen from Bituminous ASTM D2172
Paving Mixtures
(*)Mechanical Size Analysis of
ASTM D5444
Extracted Aggregate
2. Aggregate Tests (*)Sampling of Aggregates ASTM D75
(*)Reducing Samples to Testing
ASTM C702
Size
(*)Particle Size Distribution ASTM C136

(*)Material Finer than 0.075 mm ASTM C117

(*)Determination of Specific
Gravity and Water Absorption of ASTM C128
Fine Aggregate
(*)Determination of Specific
Gravity and Water Absorption of ASTM C127
Coarse Aggregate

95 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
14  Doha technical Roads and 2.Aggregate Tests (*)Flat and Elongated Particles ASTM D4791
laboratories infrastructure of
  Doha Industrial Area - 3. Soil Tests (*)Particle Size Distribution ASTM D6913
Package 03-C299
(*)Materials Finer than No. 200
ASTM D1140
(0.075mm) Sieve
(*)Liquid Limit, Plastic Limit and
ASTM D4318
Plasticity Index of Soil
(*)Lab Compaction Test using
ASTM D1557
Modified Effort
(*)Correction of Density and
ASTM D4718
Water Content for Soils
(*)Determination of California
ASTM D1883
Bearing Ratio (CBR)
(*)Determination of Moisture
ASTM D2216
Content
(*)Sand Equivalent Value ASTM D2419
4. Concrete Tests BS EN 12350
(*)Sampling of Fresh Concrete
Part 1
BS EN 12350
(*)Slump Test
Part 2
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
BS EN 12390
(*)Density of Hardened Concrete
Part 7
(*)Air Content Test for Fresh
ASTM C231
Concrete by Pressure Method
   

96 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
 

S.NO Laboratory Project Field Test Standard

15 ITL Construction of 1. Concrete Tests (*)Sampling of Fresh BS EN 12350
east industrial Concrete Part 1
road (P017-C2) 
BS EN 12350
(*)Slump Test
Part 2
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2

(*)Shape and Dimensions of BS EN 12390

Specimen Part 1

(*)Density of Hardened BS EN 12390

Concrete Part 7

(*)Compressive Strength of BS EN 12390

Concrete Specimens Part 3

(*)Test for Temperature of

ASTM C1064
Fresh Concrete
 

97 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
 

S.NO Laboratory Project Field Test Standard

16 Al Baraha Technical Roads &infrastructure 1. Soil Tests (*)Reducing Samples to Testing
ASTM C702
Laboratories North of Al Nasriya Size
(DN 108-P02) (*) Determination of Moisture
ASTM D2216
Content
(*) Particle Size Distribution ASTM D6913
(*) Materials Finer than No. 200
ASTM D1140
(0.075mm) Sieve
(*)Liquid Limit, Plastic Limit and
ASTM D4318
Plasticity Index of Soil
(*)Lab Compaction Test using
ASTM D1557
Modified Effort
(*)Correction of Density and
ASTM D4718
Water Content for Soils
(*)Determination of California
ASTM D1883
Bearing Ratio (CBR)
(*)Sand Equivalent Value ASTM D2419

(*)Sampling of Aggregates ASTM D75

2. Aggregate
Tests
(*)Particle Size Distribution ASTM C136

(*)Material Finer than 0.075 mm ASTM C117

(*)Determination of Specific
Gravity and Water Absorption of ASTM C128
Fine Aggregate
(*)Determination of Specific
Gravity and Water Absorption of ASTM C127
Coarse Aggregate

98 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
16 Al Baraha Technical Roads &infrastructure 2.Aggregate Tests (*) Clay Lumps and Friable
ASTM C142
Laboratories North of Al Nasriya Particles
(DN 108-P02)
(*) Lightweight Particles ASTM C123

(*) Flat and Elongated Particles ASTM D4791

(*) Sampling of Aggregates (From BS 812

Heaps) Part 102
(*)Determination of Moisture BS 812
Content (Oven Drying) Part 109: Sec.6
BS 812
(*)Particle Size Distribution (Wet)
Part 103.1-7.2
BS 812
(*)Particle Size Distribution (Dry)
Part 103.1-7.3
(*)Determination of Moisture BS 812 Part
Content (Oven Drying) 109: Sec.6
BS EN 12350
(*)Sampling of Fresh Concrete
3. Concrete Tests Part 1
BS EN 12350
(*)Slump Test
Part 2
(*)Making and Curing of BS EN 12390
Specimen for Strength Test Part 2
(*)Shape and Dimensions of BS EN 12390
Specimen Part 1
(*)Compressive Strength of BS EN 12390
Concrete Specimens Part 3
BS EN 12390
(*)Density of Hardened Concrete
Part 7
BS EN 12350
(*)Flow Table Test
Part 5

99 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project  Field Test Standard
16 Al Baraha Technical Roads &infrastructure
(*)Sampling of Fresh Concrete ASTM C172
Laboratories North of Al Nasriya 3. Concrete Tests
(DN 108-P02)  (*)Test for Temperature of Fresh
ASTM C1064
Concrete
(*)Slump Test ASTM C143
(*)Density Determination for
ASTM C138
Fresh Concrete
(*)Air Content Test for Fresh
ASTM C231
Concrete by Pressure Method
4.Asphalt Tests (*)Sampling of Bituminous
ASTM D979
Mixtures
(*)Bulk Specific Gravity and
ASTM D2726
Density
(*)Bulk Specific Gravity and
ASTM D1188
Density Using Coated Samples
(*)Maximum Specific Gravity and
ASTM D2041
Density
(*)Thickness of Asphalt
ASTM D3549
Specimen
(*)Sampling Compacted
Bituminous Mixtures for ASTM D5361
Laboratory Testing
(*)Mechanical Size Analysis of
ASTM D5444
Extracted Aggregate
(*)Quantitative Extraction of
Bitumen from Bituminous Paving ASTM D2172
Mixtures
(*)Preparation of Specimens
ASTM D6926
Using Marshall Apparatus
(*)Marshall Stability and Flow of
ASTM D6927
Bituminous Mixtures

100 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
17 Qatar engineering Construction & upgrade 1. Soil Tests  (*)Reducing Samples to
laboratories of E ring road north- ASTM C702
Testing Size
south link (P008-C2)
(*)Particle Size
ASTM D6913
Distribution
(*)Materials Finer than
ASTM D1140
No. 200 (0.075mm) Sieve
(*)Liquid Limit, Plastic
Limit and Plasticity Index ASTM D4318
of Soil
(*)Lab Compaction Test
ASTM D1557
using Modified Effort
(*)Determination of
California Bearing Ratio ASTM D1883
(CBR)
(*)Sampling of
ASTM D75
2. Aggregate Aggregates
Tests (*)Reducing Samples to
ASTM C702
Testing Size
(*)Particle Size
ASTM C136
Distribution
(*)Clay Lumps and
ASTM C142
Friable Particles
(*)Determination of
Specific Gravity and
ASTM C128
Water Absorption of Fine
Aggregate
(*)Determination of
Specific Gravity and
ASTM C127
Water Absorption of
Coarse Aggregate
(*)Flat and Elongated
ASTM D4791
Particles

101 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
17 Qatar engineering Construction & upgrade 2.Aggregate Tests
(*)Los Angeles Abrasion ASTM C131
laboratories of E ring road north-
south link (P008-C2)
(*)Los Angeles Abrasion ASTM C535

(*)Magnesium Sulphate
ASTM C88
Soundness
(*)Percentage of
ASTM D5821
Fractured Particles

(*)Sand Equivalent Value ASTM D2419

(*)Determination of Shell BS EN 933

Content Part 7
(*)Sampling of Fresh BS EN 12350
3. Concrete Tests Concrete Part 1
BS EN 12350
(*)Slump Test
Part 2
(*)Making and Curing of
BS EN 12390
Specimen for Strength
Part 2
Test
(*)Shape and Dimensions BS EN 12390
of Specimen Part 1
(*)Compressive Strength BS EN 12390
of Concrete Specimens Part 3
(*)Density of Hardened BS EN 12390
Concrete Part 7
(*)Test for Temperature
ASTM C1064
of Fresh Concrete
 

102 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬
 
S.NO Laboratory Project Field Test Standard
18 Qatar engineering Design & Construction 1. Soil Tests  (*)Sampling of
ASTM D75
laboratories Of Al Bustan Street Aggregates
North (P007-C5 P1)  (*)Reducing Samples to
ASTM C702
Testing Size
(*)Particle Size
ASTM D6913
Distribution
(*)Materials Finer than
ASTM D1140
No. 200 (0.075mm) Sieve
(*)Liquid Limit, Plastic
Limit and Plasticity ASTM D4318
Index of Soil
(*)Lab Compaction Test
ASTM D1557
using Modified Effort
(*)Determination of
ASTM D2216
Moisture Content
(*)Sampling of Fresh BS EN 12350
2. Concrete Tests Concrete Part 1
BS EN 12350
(*)Slump Test
Part 2
(*)Making and Curing of
BS EN 12390
Specimen for Strength
Part 2
Test
(*)Shape and BS EN 12390
Dimensions of Specimen Part 1
(*)Compressive Strength BS EN 12390
of Concrete Specimens Part 3
(*)Density of Hardened BS EN 12390
Concrete Part 7
(*)Test for Temperature
ASTM C1064
of Fresh Concrete
 

103 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                                                                                                                                                                  QSD/LL/SI/V12/2018 
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Lonestar Alpha Laboratories – Oman

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 108

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method  Location 

Soil   Moisture Content BS 1377 Part.2 /ASTM D2216 Muscat – Sahar‐Duqm‐ Salalah

Atterberg Limits  BS 1377 Part.2  Muscat 
Sieve analysis (Wet)  BS 1377 Part.2  Muscat 
Moisture /density relationship (Proctor Test)  BS 1377 Part 4   Muscat 
Concrete   Compressive strength of concrete cube  BS EN 12390‐3   Muscat – Sahar‐Duqm‐ Salalah 
Water permeability under pressure  BS EN 12390‐8  Muscat 
Rabid chloride permeability  ASTM C1202 Muscat
Chloride migration   NT BUILD 492  Muscat 
Aggregate   Aggregate Impact Value (AIV) BS 812 Pt: 112 Muscat

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 109

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Turkish Standards Institution Laboratories

(TSE) Turkey -

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 110

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Testing Field/ Material Page Testing Field/ Material Page Number

Number
Mechanical tests of metallic materials 108 Thermal insulation products tests 132
fire tests for construction material 109 chemical  analysis of metallic materials 135
Chemical analysis of cement  119 Plastics, Thermoplastic Pipes ,Fittings and  135
Plastic Pipe Systems
Cement tests 119 Paints and Varnishes 136
Aggregate tests 119 Glass products for building uses 138
Concrete tests 120 Chemical analysis of Soil 142
Terrazzo tiles tests for internal and external use 121 Microbiological test for  drinking water   143
Masonry and concrete paving product tests 121 chemical analysis of drinking water   143
Slabs of natural stone for external paving 122 TSE calibration scope 144
Sets of natural stone for external paving 123 TSE Sojuztest calibration scope 159
Kerbs of natural stone for external paving 123
Natural Stones  & Natural Stones products 124
Wood‐based panels 125
Laminates products 126
Adhesives for tiles & ceramic 126
Screed materials 126
Grout For Tiles 127
Mortar for masonry and plaster 127
NDT ‐Metal and non‐metal materials 127
Acoustics tests for insulation & Sound Absorbing  131
Materials
Ceramic tiles 132

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 111

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Mechanical  Brinell hardness test ‐ Part 1: Test method EN ISO 6506‐1  İzmir &  Gebze

tests of  60 HBW 2.5/62.5‐300 HBW  ISO 6506‐1 
metallic  2.5/62.5 
materials  100 HBW 2.5/187.5‐400 HBW 
2.5/187.5 
Rockwell hardness test ‐ Part 1: Test method  EN ISO 6508‐1  İzmir &  Gebze 
20 HRB‐100 HRB  ISO 6508‐1 
20 HRC‐70 HRC 
20 HRA‐88 HRA 
20 HRC‐70 HRC 
70 HR15N‐94 HR15N 
20 HR45N‐77 HR45N 
67 HR15T‐93 HR15T 
10 HR45T‐72 HR45T 
Tensile testing ‐ Part 1: Method of test at  EN ISO 6892‐1  İzmir, Kayseri  &  Gebze 
room temperature   ISO 6892‐1 
ASTM A615 
Vickers hardness test ‐ Part 1: Test method  EN ISO 6507‐1  İzmir &  Gebze 
150HV30‐840 HV30  ISO 6507‐1 
200 HV50‐900 HV50 
HV1,HV10 & HV30 
Charpy Impact Test (V‐ Notch) 300 J  EN ISO 148‐1  Gebze 
ISO 148‐1 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 112

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

fire tests for  Ignitability of products subjected to direct  EN ISO 11925‐2  İzmir &  Tuzla 

construction  impingement of flame ‐ Part 2: Single flame source  ISO 11925‐2 
material  test 
  fire tests for building products exposed to the  EN 13823  İzmir &  Tuzla 
  thermal attack by a single burning item 
  Reaction to fire tests for products – Non  EN ISO 1182 İzmir &  Tuzla
  combustibility test  ISO 1182 
  Determination of the gross heat of combustion  EN ISO 1716  İzmir &  Tuzla 
  (calorific value)  ISO 1716 
  Reaction to fire tests for floorings ‐ Part 1: EN ISO 9239‐1  İzmir &  Tuzla
  Determination of the burning behavior  ISO 9239‐1 
  using a radiant heat source 
Reaction to fire tests ‐spread of flame ‐part 2:  ISO 5658‐2 Tuzla
lateral spread on building and transport products 
in vertical configuration 
  Determination of Smoke Toxicity in The Test  EN ISO 5659‐2  Tuzla 
Chamber Using FTIR Spectroscopy  ISO 5659‐2 
  Reaction‐to‐fire tests ‐‐ Heat release, smoke  ISO 5660‐1  Tuzla 
production and mass loss rate ‐‐ Part 1: Heat 
release rate (cone calorimeter method) and 
smoke production rate (dynamic 
measurement) 
  Plastics ‐‐ Determination of Burning Behavior by  EN ISO 4589‐2/A1  Tuzla
Oxygen Index ‐‐ Part 2: Ambient Temperature Test  ISO 4589‐2/A1 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 113

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method Location 

fire tests for  Thermal insulating materials for building  EN 13820  İzmir &  Tuzla 

construction  applications ‐Determination of organic content 
material  Fire classification of construction products  EN 13501‐1  İzmir & Tuzla 
  and building elements ‐ Part 1: Classification 
  using test data from reaction to fire tests 
  Fire classification of construction products  EN 13501‐5  İzmir &  Tuzla 
  and building elements ‐‐ Part 5:Classification using 
  data from external fire exposure to roof tests 
  Explosive Atmospheres ‐ Part 1: Equipment EN 60079‐1 İzmir
  Protection by Flameproof Enclosures "d"  IEC 60079‐1 
  Non‐electrical Equipment for Use in EN 13463‐3 İzmir
  Potentially Explosive Atmospheres ‐ Part 3: 
Protection by Flameproof Enclosure "d " 
  Plasterboards and ceiling elements with  EN 13658‐1:2005  İzmir &  Tuzla 
thin laminations, fibrous gypsum boards,  EN 13658‐2:2005 
fibrous gypsum plaster casts, and composite  EN 13815:2006 
panels (laminates), in which the  EN 13915:2007 
incorporated material is placed on a face  EN 13950:2014 
susceptible to be exposed to fire, including  EN 13950:2005 
relevant ancillary products (in walls,  EN 13963:2005 
partitions or ceilings (or lining thereof)  EN 13963:2005/AC:2006 
subject to reaction to fire requirements).  EN 14190:2014 
EN 14190:2005 
EN 14209:2005 
EN 14496:2005 
EN 15283‐1:2008+A1:2009 
EN 15283‐2:2008+A1:2009 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 114

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method Location 

fire tests for  Gypsum products (2/4):  EN 12859:2011  İzmir, Kayseri  &  Tuzla 

construction  ‐ Plasterboards, blocks, ceiling elements and  EN 12860:2001/AC:2002 
material  gypsum plasters, fibrous gypsum plasters casts,  EN 13279‐1:2008 
  including relevant ancillary products (in walls,  EN 520:2004+A1:2009 
partitions or ceilings, as relevant, intended for fire 
protection of structural elements and/or fire 
compartmentation in buildings). 
Curtain walling (1/1): ‐ Curtain wall kits (as external  EN 13830:2015  İzmir &  Tuzla 
walls not subject to reaction to fire requirements).  EN 13830:2003 
Wood‐based panels (2/2): ‐ Unfaced, overlaid and  EN 13986:2004+A1:2015  İzmir &  Tuzla 
veneered or coated wood‐based panels (for 
nonstructural elements in internal or external 
applications). 
Masonry and related products (3/3) : ‐  EN 15824:2009  İzmir &  Tuzla 
Masonry units incorporating thermal insulating 
materials placed on a face susceptible to be 
exposed to fire (in walls and partitions subject to 
reaction to fire regulations). 
Roof coverings, rooflights, roof windows and  EN 14509:2013  İzmir, Kayseri  &  Tuzla 
ancillary products (2/6)& (3/6) : ‐   
Factory‐bonded composite or sandwich panels (for 
uses subject to reaction to fire regulations &for 
uses subject to external fire performance 
regulations). 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 115

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

fire tests for  Roof coverings, rooflights, roof windows and  EN 14782:2006 İzmir &  Tuzla

construction  ancillary products (2/6): ‐ Flat and profiled sheets  EN 14783:2013 
material  (for uses subject to reaction to fire regulations).  EN 534:2006+A1:2010 
  Roof coverings, rooflights, roof windows and  EN 12326‐1:2014  İzmir &  Tuzla 
ancillary products (2/6)&(3/6) : ‐  EN 1304:2005 
 Roofing tiles, slates, stones and shingles (for uses  EN 490:2011 
subject to reaction to fire regulations &for uses  EN 492:2012 
subject to external fire performance regulations).  EN 494:2012 
EN 494:2012+A1:2015 
EN 544:2011 
Roof coverings, rooflights, roof windows and  EN 14351‐1:2006+A1:2010  İzmir , Kayseri &  Tuzla 
ancillary products (2/6) &(3/6) : ‐ 
Roof windows (for uses subject to reaction to fire 
regulations &for uses subject to external fire 
Performance regulations). 
Roof coverings, rooflights, roof windows and  EN 14963:2006  İzmir &  Tuzla 
ancillary products (2/6) &(3/6): ‐ Rooflights (for  EN 1873:2014+A1:2016 
uses subject to reaction to fire regulations &for  EN 1873:2005 
uses subject to external fire performance 
regulations). 
Internal and external wall and ceiling finishes   EN 1469:2015  İzmir &  Tuzla 
(3/5): ‐ Cladding slabs (as external finishes in walls  EN 1469:2004 
or ceilings subject to reaction to fire regulations). 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 116

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method  Location 

fire tests for  Internal and external wall and ceiling finishes  EN 12467:2012  İzmir &  Tuzla 

construction  (3/5):‐ Shingles (as external finishes in walls or 
material  ceilings subject to reaction to fire regulations). 
  Internal and external wall and ceiling finishes  EN 13964:2014  İzmir &  Tuzla 
(3/5):‐ Suspended ceilings (kits) (as internal or  EN 13964:2004/A1:2006 
external finishes in ceilings subject to reaction to  EN 13964:2004 
fire regulations). 
Internal and external wall and ceiling finishes  EN 14716:2004  İzmir &  Tuzla 
(3/5):‐ Coverings in roll form (as internal finishes in 
walls or ceilings subject to reaction to fire 
regulations) 
Internal and external wall and ceiling finishes    EN 13245‐2:2008  İzmir &  Tuzla 
(3/5): ‐ Sidings (as internal or external finishes in  EN 13245‐2:2008/AC:2009 
walls or ceilings subject to reaction to fire  EN 14915:2013 
regulations).  EN 534:2006+A1:2010 
Internal and external wall and ceiling  EN 438‐7:2005  İzmir , Kayseri &  Tuzla 
finishes (3/5) : ‐ Panels (as internal or  EN 15102:2007+A1:2011 
external finishes in walls or ceilings subject  EN 1013:2012+A1:2014 
to reaction to fire regulations)  EN 14509:2013 
Membranes (2/3)&(3/3) : ‐ Roof sheets (for uses EN 13707:2013 İzmir &  Tuzla
subject to reaction to fire regulations &for uses  EN 13707:2004+A2:2009 
subject to external fire performance regulations).  EN 13956:2012 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 117

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method Location 

fire tests for  Membranes (2/3) : ‐ Damp proofing sheets  EN 13967:2012  İzmir &  Tuzla 

construction  (For uses subject to reaction to fire regulations).  EN 13969:2004 
material  EN 13969:2004/A1:2006 
 
  Membranes (2/3): ‐ Water vapor control layers (for  EN 13859‐1:2010  İzmir &  Tuzla 
uses subject to reaction to fire regulations).  EN 13859‐2:2010 
EN 13970:2004 
EN 13970:2004/A1:2006 
EN 13984:2013 
  Membranes (2/3): ‐ Damp proof courses (for uses  EN 14909:2012  İzmir &  Tuzla 
subject to reaction to fire regulations).  EN 14967:2006 
  Thermal insulating products (2/2) : ‐ Thermal  EN 13162:2012+A1:2015  İzmir &  Tuzla 
Insulating products (factory‐made products and  EN 13163:2012+A1:2015 
products intended to be formed in‐situ)‐(for uses  EN 13164:2012+A1:2015 
subject to regulations on reaction to fire).  EN 13165:2012+A1:2015 
  EN 13166:2012+A1:2015 
  EN 13167:2012+A1:2015 
  EN 13168:2012+A1:2015 
  EN 13169:2012+A1:2015 
  EN 13170:2012+A1:2015 
  EN 13171:2012+A1:2015 
  EN 14064‐1:2010 
  EN 14303:2009+A1:2013 
  EN 14304:2009+A1:2013 
    EN 14305:2009+A1:2013 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 118

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

fire tests for  Thermal insulating products (2/2) : ‐ Thermal  EN 14306:2009+A1:2013  İzmir &  Tuzla 

construction  Insulating products (factory‐made products and  EN 14307:2009+A1:2013 
material  products intended to be formed in‐situ)‐(for uses  EN 14308:2009+A1:2013 
  subject to regulations on reaction to fire).  EN 14309:2009+A1:2013 
EN 14313:2009+A1:2013 
EN 14313:2015 
EN 14314:2009+A1:2013 
EN 14315‐1:2013 
EN 14315‐2:2013 
EN 14933:2007 
EN 14934:2007 
  Products related to concrete, mortar and grout  EN 1504‐2:2004  İzmir &  Tuzla 
(2/2): ‐ Concrete protection and repair products  EN 1504‐3:2005 
(for uses subject to reaction to fire regulations).  EN 1504‐4:2004 
EN 1504‐6:2006 
  Construction adhesives (2/2) : ‐ Adhesives for tiles  EN 12004:2007+A1:2012 İzmir , Corum &  Tuzla
(for uses subject to reaction to fire regulations)  EN 12004‐1:2017 
  Space heating appliances (2/2):‐ Space heating  EN 442‐1:2014  İzmir
appliances without internal energy source (for 
uses subject to reaction to fire regulations). 
  Pipes, tanks and ancillaries not in contact with  EN 13341:2005+A1:2011 İzmir &  Tuzla
water intended for human consumption  (4/5) :‐ EN 295‐1:2013 
Tanks (in installations in areas subject to reaction  EN 295‐4:2013 
to fire regulations, used for the  EN 295‐5:2013 
transport/disposal/storage of water not intended  EN 295‐7:2013 
for human consumption)  EN 15069:2008 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 119

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method Location 

fire tests for  Flat glass, profiled glass and glass‐block products  EN 1279‐5:2005+A2:2010  İzmir Kayseri, &  Tuzla 

construction  (2/6) :‐ Insulating glass units (for uses subject to 
material  reaction to fire regulations) 
  Flat glass, profiled glass and glass‐block  EN 1096‐4:2004  İzmir &  Tuzla 
Products (2/6) & (3/6):‐ Flat or curved glass panels  EN 12150‐2:2004 
(for uses subject to reaction to fire regulations  EN 12337‐2:2004 
&for uses subject to external fire performance  EN 13024‐2:2004 
regulations).  EN 14178‐2:2004 
EN 14449:2005 
EN 14449:2005/AC:2005 
EN 1748‐1‐2:2004 
EN 1748‐2‐2:2004 
EN 1863‐2:2004 
EN 572‐9:2004 
EN 1036‐2:2008 
Flat glass, profiled glass and glass‐block  EN 1279‐5:2005+A2:2010  İzmir , Kayseri &  Tuzla 
Products (3/6):‐ Insulating glass units (for uses 
subject to external fire performance regulations). 
Fire classification of construction products and  EN 13501‐2+A1  Tuzla & Kayseri 
building elements ‐ Part 2: Classification using data 
from fire resistance tests, excluding ventilation 
services 
Fire resistance‐ tests‐ part 1: general requirements  EN 1363‐1  Tuzla & Kayseri 
Fire resistance tests‐ part 2: alternative and  EN 1363‐2  Tuzla 
additional procedures 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 120

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

fire tests for  Fire‐resistance tests ‐‐ elements of building  ISO 834‐1  Tuzla 

construction  construction ‐‐ part 1: general requirements 
material 
 
  Fire resistance tests for non‐ loadbearing  EN 1364‐1  Tuzla & Kayseri 
elements: walls , ceilings, curtain walling ‐ full  EN 1364‐2 
configuration (complete assembly)& curtain  EN 1364‐3 
walling – part configuration  EN 1364‐4 
  Fire resistance tests for loadbearing elements :  EN 1365‐1  Tuzla 
walls, floors and roofs, beams & columns  EN 1365‐2  
  EN 1365‐3 
EN 1365‐4 
  Fire resistance tests for service installations: linear  EN 1366‐4  Tuzla 
joint seals 
  Test methods for determining the contribution to  EN 13381‐1  Tuzla 
the fire resistance of structural members: 
horizontal protective membrane 
  Test methods for determining the contribution to  EN 13381‐2 Tuzla
the fire resistance of structural members: vertical 
protective membranes 
Test methods for determining the contribution to  EN 13381‐3  Tuzla 
the fire resistance of structural members: applied 
protection to concrete members 
Test methods for determining the contribution to  EN 13381‐4  Tuzla 
the fire resistance of structural members: applied 
passive protection to steel members 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 121

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

fire tests for  fire resistance test for door and shutter assemblies  EN 1634‐1 Tuzla & Kayseri

construction  and openable windows 
material  fire resistance characterization test for elements of EN 1634‐2 Tuzla
  building hardware 
smoke control test for door and shutter assemblies EN 1634‐3/AC  Tuzla
Secure storage units ‐ classification and methods  EN 15659  Tuzla 
of test for resistance to fire – light fire storage 
units 
landing doors fire resistance test  EN 81‐58  Tuzla & Kayseri 
Fire tests on building materials and structures for  BS 476‐22  Tuzla 
Non‐Loadbearing Construction Products 
Fire resistance tests for service installations: raised  EN 1366‐6  Tuzla 
access floors and hollow floors 
Fire resistance tests for service installations:  EN 1366‐3  Tuzla 
penetration seals 
Test methods for determining the contribution to  EN 13381‐8  Tuzla 
the fire resistance of structural members: applied 
reactive protection to steel members 
Methods for determination of the fire resistance of  BS 476‐21  Tuzla 
loadbearing elements of construction 
Method for determination of the fire resistance of  BS 476‐20  Tuzla 
elements of construction (general principles) 
Methods for determination of the fire resistance of  BS 476‐21  Tuzla 
loadbearing elements of construction 
Fire resistance test for unprotected electric cables  EN 50577  Tuzla 
(P classification) 
  Manholes and inspection chambers (For all use(s)  EN 295‐6:2013  Tuzla 
when subject to regulations on reaction to fire) 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 122

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name 
Test Name   Test Method
Test Method  Location 
Location  

Chemical  Determination of Loss On Ignition  EN 196‐2  Ankara 

analysis of  Determination of Chloride  EN 196‐2  Ankara 
cement   Determination of Residue Insoluble in HCl and  EN 196‐2 Ankara
  Na₂CO₃ 
  Gravimetric Determination of Sulphate EN 196‐2 Ankara
  Pozzolanicity Test  EN 196‐5  Ankara 
  Determination of the water‐soluble  EN 196‐10  Ankara 
chromium (VI) content of cement 
Cement tests   Determination of strength   EN 196‐1  Ankara 
  Setting time   EN 196‐3+A1  Ankara 
  Soundness   EN 196‐3+A1 Ankara
Aggregate tests  Particle Size Distribution   EN 933‐ 1  Ankara 
  Flakiness Index   EN 933‐ 3  Ankara 
  Elongation (Shape) Index EN 933‐ 4 Ankara
  Determination of percentage of crushed and  Ankara
  EN 933‐5 
broken surfaces in coarse aggregate particles 
  Assessment of surface characteristics ‐ Flow  Ankara 
coefficient of aggregates  EN 933‐6  
  Determination of shell content ‐ Percentage of  EN 933‐7  Ankara 
shells in coarse aggregates 
  Assessment of fines ‐ Methylene blue test  EN 933‐9+A1  Ankara 
  Determination of the resistance to ware   EN 1097‐1  Ankara 
(Micro‐ Deval) 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 123

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method Location 

Aggregate tests  Methods for the determination of resistance to  EN 1097‐2 Ankara

fragmentation‐Los Angeles 
Determination of loose bulk density and voids  EN 1097‐3  Ankara 
Determination of particle density and water  EN 1097‐6  Ankara 
absorption 
Determination of the polished stone value  EN 1097‐8   Ankara 
( Resistance of coarse aggregates to polishing) 
Determination of the polished stone value  EN 1097‐8   Ankara 
( Aggregate abrasion value ‐AAV) 
Determination of the affinity between aggregate  EN 12697‐11   Ankara 
and bitumen 
Determination of resistance to freezing and  EN 1367‐1  Ankara 
thawing 
Tests for thermal and weathering properties of  EN 1367‐2  Ankara 
aggregates‐ Part 2: Magnesium sulfate test 
Volume Stability ‐ Drying Shrinkage  EN 1367‐4  Ankara 
Tests for thermal and weathering properties of  EN 1367‐5  Ankara 
aggregates: Determination of resistance to thermal 
shock 
Particle length  EN 13450  Ankara 
Alkali Reactivity Mortar‐Bar Method  ASTM C 1260  Ankara 
Determination of potential presence of humus EN 1744‐1+A1  Ankara
Concrete tests  Compressive strength of concrete test specimens  EN 12390‐3  Ankara,  Corum & Gebze 
  Determination of density of hardened concrete  EN 12390‐7  Ankara& Corum 
  Determination of Tensile Splitting Strength  EN 12390‐6  Ankara& Corum 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 124

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Terrazzo tiles  Dimensional deviations EN 13748‐1 Ankara

tests for  EN 13748‐2 
internal and  Straightness of edges of the upper face   EN 13748‐1  Ankara 
external use   EN 13748‐2 
Breaking strength and Breaking load EN 13748‐1 Ankara
EN 13748‐2 
  Flatness of the upper face  EN 13748‐1 Ankara
EN 13748‐2 
  Water absorption  EN 13748‐1 Ankara
EN 13748‐2 
  Abrasion resistance(Bohme test method) EN 13748‐1 Ankara
EN 13748‐2 
Slip resistance   EN 13748‐1 Ankara
EN 13748‐2 
Masonry and  Thickness of facing layer of Concrete kerb units EN 1340 Ankara
concrete  Bending strength  of Concrete kerb units  EN 1340  Ankara 
paving product  Abrasion according to the Bohme test  of Concrete  EN 1340  Ankara 
tests   kerb units 
Slip/skid resistance  of Concrete kerb units  EN 1340  Ankara 
  Due to weather the effects of wear resistance  EN 1340 Ankara
(water absorption)  of Concrete kerb units 
  Due to weather the effects of wear resistance  EN 1340 Ankara
(freeze thaw) of Concrete kerb units 
  Thickness of facing layer of Concrete paving EN 1338 Ankara
blocks 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 125

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method Location 

Masonry and  Abrasion according to the Bohme test  of  Concrete  EN 1338  Ankara 

concrete  paving blocks 
paving product  Slip/skid resistance  of  Concrete paving blocks EN 1338 Ankara
tests  Due to weather the effects of wear resistance  EN 1338  Ankara 
(water absorption)  of  Concrete paving blocks 
Due to weather the effects of wear resistance  EN 1338  Ankara 
(freeze thaw) of Concrete  paving blocks 
Tensile splitting strength  of Concrete  paving  EN 1338  Ankara 
blocks 
Shape and Dimensions  of Concrete  paving blocks  EN 1339  Ankara 
Thickness of surface layer  of Concrete  paving  EN 1339 Ankara
blocks 
Flexural strength of Concrete  paving blocks EN 1339 Ankara
The breaking load  of Concrete paving blocks  EN 1339 Ankara 
Abrasion resistance (Bohme Method)  EN 1339 Ankara 
Due to weather the effects of wear resistance  EN 1339 Ankara 
(Free Thaw)  of Concrete paving blocks 
Abrasion resistance of Concrete  paving blocks EN 1339 Ankara
(With Large Disk) of Concrete paving blocks 
Slip/Skid Resistance of Concrete paving blocks EN 1339 Ankara
Due to weather the effects of wear resistance  EN 1339  Ankara 
(Water absorption) of Concrete paving blocks 
Determination of compressive strength  EN 772‐1  Manisa 
Slabs of natural  Determination of the slip resistance  EN 1341  Ankara 
stone for  Shape and dimensions  EN 1341  Ankara 
external paving 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 126

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

 
Slabs of natural  Measurement of abrasion resistance  EN 1341  Ankara 
stone for   
external paving 
Sets of natural  Determination of the slip resistance  EN 1342  Ankara 
stone for  Shape and dimensions  EN 1342  Ankara 
external paving  Measurement of abrasion resistance  EN 1342  Ankara 
Kerbs of  Shape and dimensions EN 1343 Ankara
natural stone 
for external 
paving 
Natural Stones   Determination of abrasion resistance  EN 14157  Ankara 
& Natural  Determination of compressive strength  EN 1926  Ankara 
Stones 
products  Determination of water absorption EN 1925 Ankara
coefficient by capillarity 
  Böhme Abrasion Test EN 14157 Ankara
  Determination of the slip resistance  EN 14231  Ankara 
  Determination of breaking load at dowel hole  EN 13364  Ankara 
  Determination of resistance to ageing by thermal  EN 14066 Ankara
shock 
  Determination of real density and apparent EN 1936 Ankara
density, and of total and open porosity (except real 
density) 
  Determination of water vapour transmission  EN ISO 12572  Ankara 
properties 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 127

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name  Test Method  Location 

Natural Stones   Shape and dimensions of Natural stone products: EN 13373 Ankara

& Natural  ‐ Modular tiles 
Stones  ‐ Slabs for floors and stairs 
products  Determination of frost resistance of Natural stone  EN 12371  Ankara 
Products: 
‐Kerbs of natural stone for external paving 
‐Slabs of natural stone for external paving 
‐ Modular tiles 
‐Slabs for floors and stairs 
Flexural strength  EN 12372  Ankara 
Water absorption at atmospheric pressure EN 13755 Ankara
Wood‐based  Determination of moisture content  EN 322  Ankara & Gebze 
panels  Determination of density  EN 323  Ankara & Gebze 
  Determination of dimensions of boards:  EN 324‐1  Ankara & Gebze 
Determination of thickness, width and length 
Wood‐Based panels‐ Determination of  EN 324‐2  Ankara 
dimensions of boards: Determination of 
squareness and edge straightness 
Determination of modulus of elasticity in bending  EN 310  Ankara & Gebze 
and of bending strength  
Surface soundness   EN 311  Ankara & Gebze 
Determination of dimensions of test pieces  EN 325  Ankara 
  Sampling, cutting and inspection : EN 326‐1 Ankara
Sampling test pieces and expression of test results 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 128

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Laminates  Resistance to surface wear  EN 438‐2  Ankara 

products   Resistance to abrasion ( flooring grade laminates )  EN 438‐2  Ankara 
  Substrate protection against water vapour  EN 438‐2  Ankara 
Resistance to water vapour EN 438‐2 Ankara
Resistance to dry heat  EN 438‐2 Ankara 
Resistance to scratching  EN 438‐2 Ankara 
Resistance to staining  EN 438‐2 Ankara 
Adhesives for  Determination of tensile adhesion strength EN 1348 Ankara, Corum  & Gebze
tiles & ceramic  for cementitious adhesives  EN 12004‐2 
Determination of open time EN 1346 Ankara, Corum  & Gebze
EN 12004‐2 
Determination of shear adhesion strength of EN 1324 Ankara
dispersion adhesives  EN 12004‐2 
Determination of shear adhesion strength of EN 12003 Ankara
reaction resin adhesives  EN 12004‐2 
Determination of slip EN 1308 Gebze & Corum
EN 12004‐2 
Determination of tensile adhesion strength for  EN 12004‐2 Gebze & Corum
cementitious Adhesives 
Determination of transverse deformation for  EN 12004‐2  Gebze & Corum 
cementitious adhesives 
Screed  Determination of flexural and  EN 13892‐2  Ankara 
materials  compressive strength 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 129

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Grout For Tiles  Determination Of Resistance To Abrasion  EN 12808‐2  Ankara 

Determination of flexural and compressive strength /  EN 12808‐3  Ankara 
Flexural and compressive strength after freeze‐thaw 
Determination Of Shrinkage EN 12808‐4 Ankara
Determination of water absorption EN 12808‐5 Ankara
Determination of transverse deformation for  EN 12002 Gebze & Corum
cementitious adhesives and grouts
Mortar for  Determination of flexural and compressive  EN 1015‐11  Ankara & Tuzla 
masonry and  strength of hardened mortar 
plaster  Determination of dry bulk density of hardened  EN 1015‐10  Tuzla 
mortar 
Determination of adhesive strength of hardened  EN 1015‐12  Tuzla 
rendering and plastering mortars on substrates
Determination of water absorption coefficient due to  EN 1015‐18  Tuzla 
capillary action of hardened mortar
Determination of water vapor permeability of  EN 1015‐19  Tuzla 
hardened rendering and plastering mortars
NDT ‐Metal and   NDT (Visual Testing ‐ VT)  ISO 17635  Gebze 
non‐metal   ‐ Welding Seams  ISO 5817 
materials   ‐Welding Joints of Pressure Equipment  EN 1370 
   ‐Pipes  EN 13018 
   ‐Casting  EN 13981‐1 
 ‐Forging  EN 13674‐1 
 ‐Railway applications   
  

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 130

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

NDT ‐Metal and   NDT (Ultrasonic Testing ‐      UT)   EN ISO 17640  Gebze 

non‐metal   ‐Welding Joints   EN ISO 17635 
materials   ‐Welding Seams   ISO 17635 
  ‐Welding Joints of Pressure Equipment   EN ISO 11666 
‐Pipes   EN 10228‐3 
‐Casting   EN 12680‐1 
‐Forging   EN 10160 
‐Railway applications   EN ISO 5817 
   ISO 5817 
 ISO 5948 
 EN 13261 
 EN 13262 
 EN 13981‐4 
 EN 13981‐2 
EN 13674‐1
NDT (Radiographic Testing ‐ RT)  ISO 17636‐1  Gebze 

‐Welding Joints  ISO 17636‐1 
‐Welding Seams  ISO 17635 
‐Welding Joints of Pressure Equipment  ISO 17635 
‐Pipes  EN 12681 
‐Casting  ISO 5579 
‐Forging  ISO 5817 
‐Railway applications  ISO 10675‐1 
  EN 13981‐3 
ISO 10042

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 131

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

NDT ‐Metal and  Digital Radiography for metallic material  ISO 17636‐2  Gebze 

non‐metal  ISO 17636‐2 
materials  EN 14784‐2 
  ISO 10675‐2 
  NDT (Magnetic Particle Testing ‐ MT)  EN ISO 9934‐1  Gebze 
‐Ferromagnetic materials  ISO 9934‐1 
‐Welding Seams  EN ISO 17635 
‐Welding Joints of Pressure Equipment  ISO 17635 
‐Pipes  EN ISO 17638 
‐Casting  ISO 17638 
‐Forging  EN ISO 23278 
‐Railway applications  ISO 23278 
  EN 1369 
EN 10228‐1 
EN ISO 5817 
ISO 5817 
EN 13261 
ISO 6933 
EN 14200 
 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 132

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

NDT ‐Metal and  NDT (Liquid Penetrant Testing ‐ PT)  EN ISO 3452‐1  Gebze 

non‐metal  ‐Welding Seams  ISO 3452‐1 
materials  ‐Welding Joints of Pressure Equipment  EN ISO 17635 
  ‐Pipes  ISO 17635 
  ‐Casting  EN 10228‐2 
‐Forging  EN 1371‐1 
‐Railway applications  EN 1371‐2 
  EN ISO 23277 
  ISO 23277 
EN ISO 5817 
ISO 5817 
TS EN 13981‐4 
EN 13981‐4 
  NDT (Eddy Current Testing ‐ ET)  EN ISO 15549  Gebze 
‐Welding Seams  EN ISO 17643 
‐Welding Joints of Pressure Equipment  ISO 17643 
‐Steel Pipes and Tubes  EN ISO 5817 
ISO 5817 
EN ISO 17635
   Macrostructure Inspection pf metallic materials EN ISO 17639 Gebze
ISO 17639 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 133

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Acoustics tests  Field measurement of sound insulation in buildings  EN ISO 16283‐1  Gebze 

for insulation & and of building elements: Airborne sound insulation  ISO 16283‐1 
Sound Absorbing 
Materials  Field measurement of sound insulation in buildings  EN ISO 16283‐2  Gebze 
and of building elements: Impact sound insulation  ISO 16283‐2 

Laboratory measurement of sound insulation of  EN ISO 10140‐1  Tuzla 

building elements: Application rules for specific  ISO 10140‐1 
laboratory measurement of sound insulation of  EN ISO 10140‐2  Tuzla & Kayseri 
building elements : measurement of airborne sound  ISO 10140‐2 
insulation 
rating of sound insulation in buildings and of building  EN ISO 717‐1 Tuzla & Kayseri
elements : airborne sound insulation  ISO 717‐1 
Laboratory measurement of sound insulation of  EN ISO 10140‐3 Tuzla
Building elements : measurement of impact sound  ISO 10140‐3 
insulation 
rating of sound insulation in buildings and of building  EN ISO 717‐2  Tuzla 
elements : impact sound insulation ISO 717‐2
measurement of sound absorption in a reverberation  EN ISO 354  Tuzla 
room  ISO 354
  sound absorbers for use in buildings‐rating of sound  EN ISO 11654 Tuzla
absorption  ISO 11654 
  determination of sound absorption coefficient and  EN ISO 11654 Tuzla
impedance in impedance tubes : transfer‐ function  ISO 11654 
method 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 134

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Ceramic tiles  Determination of water absorption apparent  EN ISO 10545‐3  Manisa 

porosity, apparent relative density and bulk density  ISO 10545‐3 
Determination of modulus of rupture and breaking  EN ISO 10545‐4  Manisa 
strength  ISO 10545‐4 
 Thermal  Determination Of Length And Width  EN 822  Tuzla 
insulation  Determination Of Thickness  EN 823  Tuzla 
products tests 
Determination Of Squareness  EN 824  Tuzla 
Determination Of Flatness  EN 825  Tuzla 
Determination Of Compression Behavior  EN 826  Tuzla 
Determination Of Apparent Density  EN 1602  Tuzla 
  Determination Of Dimensional Stability Under  EN 1603  Tuzla 
Constant Normal Laboratory Conditions (23 °C / 50 
% Relative Humidity)
Determination Of Dimensional Stability Under  EN 1604  Tuzla 
Specified Temperature And Humidity Conditions
Determination Of Deformation Under Specified  EN 1605  Tuzla 
Compressive Load And Temperature Conditions
Determination Of Tensile Strength Perpendicular To  EN 1607  Tuzla 
Faces
Determination Of Short Term Water Absorption By  EN 1609  Tuzla 
Partial Immersion 
Determination of water vapour transmission EN 12086 Tuzla
properties 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 135

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Thermal insulation Determination Of Long Term Water Absorption By  EN 12087 Tuzla

products tests  İmmersion 
Determination Of Bending Behavior  EN 12089  Tuzla 
Determination Of The Behavior Under Point Load  EN 12430  Tuzla 
Determination Of Thermal Resistance By Means Of  EN 12667  Tuzla & Corum 
Guarded Hot Plate And Heat Flow Meter Methods 
for  
Determination Of Thermal Resistance By Means Of  EN 12664 Tuzla & Corum
Guarded Hot Plate And Heat Flow Meter Methods 
for  Dry And Moist Products Of Medium And Low 
Thermal Resistance 
Determination Of Thermal Resistance By Means Of  EN 12939  Tuzla 
Guarded Hot Plate And Heat Flow Meter Methods 
for Thick Products Of High And Medium Thermal 
Resistance 
Thermal insulation ‐ Determination of steady‐state  EN ISO 8990  Tuzla , Manisa & Kayseri 
thermal transmission properties ‐ Calibrated and  ISO 8990 
guarded hot box for Curtain walling, Doors and 
Windows 
Determination of thermal transmittance by the hot‐ EN ISO 12567‐1  Tuzla 
box method ‐ Complete windows and doors ISO 12567‐1
Thermal performance of windows and doors  EN ISO 12567‐2  Tuzla 
Determination of thermal transmittance by hot box  ISO 12567‐2 
method ‐ Part 2: Roof windows and other projecting 
windows 
Thermal insulation ‐ Determination of steady‐state  EN ISO 8497  Tuzla  
thermal transmission properties of thermal  ISO 8497 
insulation for circular pipes

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 136

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Thermal insulation Determination of dimensions, squareness and  EN 13467  Tuzla 

products tests  linearity of preformed pipe insulation
Determination of water vapor transmission  EN 13469  Tuzla 
properties of preformed pipe insulation 
Determination of the apparent density of preformed  EN 13470  Tuzla 
pipe insulation 
Determination of short term water absorption by  EN 13472  Tuzla 
partial immersion of preformed pipe insulation 
Determination Of The Tensile Bond Strength Of The  EN 13494 Tuzla
Adhesive And Of The Base Coat To The Thermal 
İnsulation Material
Determination Of The Mechanical Properties Of  EN 13496 Tuzla
Glass Fiber Meshes As Reinforcement For External 
Thermal
Determination Of The Resistance To İmpact Of  EN 13497 Tuzla
External Thermal İnsulation Composite Systems  
Determination Of The Resistance To Penetration Of  EN 13498  Tuzla 
External Thermal İnsulation Composite Systems 

Thermal performance of windows, doors and  EN ISO 10077‐1  Kayseri 

shutters ‐Calculation of thermal transmittance : 
Simplified method 
Thermal performance of windows, doors and  EN ISO 10077‐2  Kayseri 
shutters ‐ Calculation of thermal transmittance: 
Numerical method for frames 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 137

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

chemical   Optical Emission Spectrometer (OES)  ASTM E415  Gebze 

analysis of  Spectral Analyze Test  of Low and Carbon Alloy  ASTM A615 
metallic  Steels (Excluding steel wires): Carbon (C), Silicon (Si), 
materials  Manganese (Mn),Phosphorous (P), Sulfur (S), 
Chromium (Cr),Molybdenum (Mo), Nickel (Ni), 
Aluminum(Al), Copper (Cu) elements 
Optical Emission Spectrometer (OES)  ASTM E1086  Gebze 
Spectral Analyze Test of Stainless Steel (Excluding 
steel wires):Carbon (C), Silicon (Si), Manganese (Mn),
Phosphorous (P), Sulfur (S), Chromium (Cr), 
Molybdenum (Mo), Nickel (Ni), Aluminum(Al), Copper
(Cu) elements 
Plastics,  Determination of Mass Flow Rate (MFR) EN ISO 1133‐1 Gebze
Thermoplastic  ISO 1133‐1 
Pipes ,Fittings  Longitudinal Reversion ‐ Test Method and  EN ISO 2505  Gebze 
and Plastic  Parameters  ISO 2505 
Pipe Systems  Determination of Ring Stiffness  EN ISO 9969  Gebze 
(Max d= 1600 mm)  ISO 9969
Determination of Tensile Properties (Max=10 kN) EN ISO 527‐1 Gebze
EN ISO 527‐2 
ISO 527‐1 
ISO 527‐2 
EN ISO 6259‐1 
EN ISO 6259‐3 
ISO 6259‐1
Determination of Tensile Stress‐Strain Properties  ISO 37  Gebze 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 138

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Plastics,  Determination of Glass Transition  EN ISO 11357‐1  Gebze 

Thermoplastic  Temperature  EN ISO 11357‐2 
Pipes ,Fittings  ISO 11357‐1 
and Plastic  ISO 11357‐2 
Pipe Systems  Determination of Temperature and Enthalpy  EN ISO 11357‐1  Gebze 
of Melting and Crystallization  EN ISO 11357‐3 
ISO 11357‐1 
ISO 11357‐3 
Determination of Oxidation Induction Time  EN ISO 11357‐1  Gebze 
(OIT)  EN ISO 11357‐6 
ISO 11357‐1 
EN 728
Determination of the Resistance to Internal Pressure  EN ISO 1167‐1  Gebze 
(Max d=630 mm)  EN ISO 1167‐2 
ISO 1167‐1 
ISO 1167‐2 
Determination of Vicat Softening Temperature (VST)  EN ISO 306  Gebze 
ISO 306 
ISO 2507‐1 
Determination of Density  EN ISO 1183‐1  Gebze 
ISO 1183‐1
Determination of Carbon Black Content with  ASTM D 4218  Gebze 
Calcination and Pyrolysis
Paints and  Determination of Paint Thickness Magnetic Eddy  EN ISO 2808  Gebze & Kayseri 
Varnishes  Method  ISO 2808
Determination of Density Pyknometer method  EN ISO 2811‐1  Gebze 
ISO 2811‐1

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 139

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Paints and  Resistance to Liquid Soaps and Detergents Immersion  EN ISO 2812‐1  Gebze 

Varnishes  Method  ISO 2812‐1 
Resistance to Mineral Oils Immersion Method  EN ISO 2812‐1  Gebze 
ISO 2812‐1 
Determination of non‐volatile‐matter EN ISO 3251 Gebze
content  ISO 3251
Determination of Resistance to Alkaline and EN ISO 2812‐1 Gebze
Acid Immersion Method  ISO 2812‐1 
Determination of Specular Gloos of Non‐metallic  EN ISO 2813 Gebze
Paint Films at 20°, 60° and 85° ISO 2813
Determination of wet‐scrub resistance and  EN ISO 11998  Gebze 
clean ability of coatings ISO 11998
  Determination of hiding power Determination of  EN ISO 6504‐3  Gebze 
contrast ratio (opacity) of light‐colored paints at a  ISO 6504‐3 
fixed spreading rate 
  Determination of Water‐vapor Transmission  EN ISO 7783 Gebze & Tuzla
Properties  ISO 7783 
  Determination Of Liquid Water Permeability Coating  EN 1062‐3  Gebze & Tuzla 
Materials and Coating Systems for Exterior Masonry 
and Concrete 
  Film Thickness Calculation Method  EN 1062‐1  Gebze 
Determination of fineness of grind  EN ISO 1524  Gebze 
ISO 1524
Measurement of bond strength by pull‐off of EN 1542 Tuzla
Products and systems for the protection and repair of 
concrete structures 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 140

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Paints and  Evaluation Of Degradation Of Coatings; Designation  EN ISO 4628‐2  Tuzla 

Varnishes  Of Quantity And Size Of Defects, And Of İntensity Of  ISO 4628‐2 
Uniform Changes İn Appearance: Assessment 
Of Degree Of Blistering 
  Evaluation Of Degradation Of Coatings; Designation  EN ISO 4628‐4  Tuzla 
Of Quantity And Size Of Defects, And Of İntensity Of  ISO 4628‐4 
Uniform Changes İn Appearance: Assessment 
Of Degree Of Cracking 
  Evaluation Of Degradation Of Coatings; Designation  EN ISO 4628‐5  Tuzla 
Of Quantity And Size Of Defects, And Of İntensity Of  ISO 4628‐5 
Uniform Changes İn Appearance: Assessment 
Of Degree Of Flaking 
Glass products  Generalities, dimensional tolerances and rules for the  EN 1279‐1  Kayseri 
for building uses  system description 
Long term test method and requirements for  EN 1279‐2 Kayseri
moisture penetration (Applicable for only desiccant in 
bulk) for Insulating glass units 
   Determination of Moisture vapor transmission rate & EN 1279‐4  Kayseri 
Adhesion 
  Fogging test & Moisture penetration index  EN 1279‐6  Kayseri 
  Testing and classification resistance against manual  EN 356  Kayseri 
attack 
  Energy conservation and heat retention ‐Radiation  EN 410 Kayseri
properties: Light transmittance and reflectance 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 141

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Glass products  Energy conservation and heat retention ‐  EN 410  Kayseri 

for building uses  Radiation properties: Solar energy characteristics 
Determination of thermal transmittance (U value) ‐ EN 673 Kayseri
Calculation method 
Pendulum test ‐ Impact test method and classification EN 12600 Kayseri
for flat glass 
Glazing and airborne sound insulation  EN 12758  Kayseri 
ISO 10140‐2 (ISO 140‐3) 
Mechanical strength & Fragmentation test for EN 12150‐1  Kayseri 
Thermally toughened soda lime silicate safety glass  EN 14179‐1 
EN 1863‐1 
Mechanical strength & Fragmentation test for  EN 13024‐1  Kayseri 
Thermally toughened borosilicate safety glass 
Mechanical strength & Fragmentation test for  EN 14321‐1  Kayseri 
Thermally toughened alkaline earth silicate safety 
glass 
  Four point bending strength test  EN 1288‐3  Kayseri 
  Air permeability test and classification for Windows  EN 1026  Kayseri 
and Doors  EN 12207 
  Resistance to wind load test and classification for  EN 12211  Kayseri 
Windows and Doors  EN 12210 
  Water tightness test and classification for Windows  EN 1027  Kayseri 
and Doors  EN 12208 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 142

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Glass products  Resistance to repeated opening and closing test and  EN1191  Kayseri 

for building uses  classification for Windows and Doors  EN 12400 
EN 13115 
EN 12217 
Thermal performance of windows and doors:  EN ISO 12567‐1  Kayseri 
Determination of thermal transmittance by the hot‐ ISO 12567‐1 
box method: Complete windows and doors 
Operating forces test and classification of Windows  EN 12046‐1  Kayseri 
EN 13115 
Determination of the resistance to racking of  EN 14608  Kayseri 
Windows 
Determination of the resistance to static Torsion of  EN 14609  Kayseri 
Windows 
Soft and heavy body impact test, safety requirements  EN 13049 Kayseri
and classification of Windows 
Thermal performance of windows and doors  EN ISO 12567‐2  Kayseri 
Determination of thermal transmittance by hot box  ISO 12567‐2 
method : Roof windows and other projecting 
windows 
  Operating forces test and classification of doors  EN 12046‐2  Kayseri 
EN 12217
  Determination of the resistance to vertical load test  EN 947  Kayseri 
and classification of Hinged and Pivoted Doors  EN 1192 
EN 13115 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 143

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Glass products  Determination of the resistance to static torsion test  EN 948  Kayseri 

for building uses  and classification of Hinged and Pivoted Doors  EN 1192 
EN 13115 
Determination of the resistance to soft and heavy  EN 949 Kayseri
body impact for doors test and classification of  EN 1192 
Windows and Curtain Walling Doors, Blinds and 
Shutters 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 144

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Chemical  Determination of pH Pretreatment:   TS ISO 10390  Gebze 

analysis of Soil   Pretreatment of samples for physico‐chemical analysis  ISO 10390 
Measurement: Electrometric Method 
Determination of Oil And Gres Soxhlet SM 5520E Gebze
Extraction Method 
Pretreatment: Microwave Digestion Analysis: ICP‐MS  EN ISO 17294‐1  Gebze 
Method:   EN ISO 17294‐2 
Determination of Arsenic (As), Barium (Ba),Cobalt (Co),  ISO 17294‐1 
Chrome (Cr), Copper (Cu),Cadmium (Cd), Molybdenum  ISO 17294‐2 
(Mo), Nickel (Ni), Lead (Pb), Antimony (Sb), Selenium  EPA 3051A 
(Se), Mercury (Hg), Thallium (Tl), Tin (Sn),Silver (Ag),  EPA 6020A 
Boron (B), Beryllium (Be),Titanium (Ti), Zinc (Zn), 
Vanadium (V),Uranium (U)
BTEX (Benzene, Toluene, Ethyl benzene, Xylene)  EPA 5021  Gebze 
GC‐MS Headspace Method  EPA 8260 
Determination of Total Petroleum Hydrocarbons  EN 14039  Gebze 
GC‐FID Method 
Determination of Absorbable Organic Halogens (AOX) /  EN 16179  Gebze 
Determination of Total Organic Halogens (TOX)  EN 16166 
Pretreatment: Sample Preparation Analysis: 
Microcoulumetric Method 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 145

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Chemical  Determination of Volatile Organic Compounds: GC‐MS   EPA 5021  Gebze 

analysis of Soil   Headspace Method :    EPA 8260 
(1,1‐Dichloroethene;Dichloromethane; trans‐1,2 
‐Dicholoroethene;1,1‐Dichloroethane; cis‐1,2 
‐Dicholoroethene; 2,2‐Dichloropropane; 
Bromochloromethane; Tricholoromethane 
(Chloroform); 1.1.1Trichloroethane; 1,1 
‐Dichloropropene; Tetrachloromethane; Benzene; 1,2‐
Dicholoroethane;Trichloroethene; 1,2‐
Dichloropropane;Dibromomethane;Bromodichloromet
hane;Toluene; 1,1,2‐Trichlorethane;Tetrachloroethene; 
1,3‐Dichloropropane;Chlorodibromomethane; 
1,2‐Dibromoethane; Monochlorobenzene;1,1,1,2‐
Tetrachloroethane; Ethyl benzene; m/p‐Xylene; o‐
Xylene; Styrene; Bromoform; Cumene 
(Isopropylbenzene);Bromobenzene; 1,2,3 
Trichloropropane;n‐Propylbenzene; 2‐Chlorotoluene; 
 4‐Chlorotoluene; 1,3,5‐Trimethylbenzene; 
tert‐Butylbenzene; 1,2,4‐Trimethylbenzene; 
sec‐Butylbenzene; 1,3‐Dichlorobenzene; 1,4 
‐Dichlorobenzene; p‐isopropyl toluene; 1,2 
‐Dichlorobenzene; n‐Butylbenzene; 1,2 
‐Dibromo‐3‐Chloropropane; 1,2,4‐Trichlorobenzene; 
Naphthalene;Hexachloro‐1,3‐Butadiene; 1,2,3 
‐Trichlorobenzene) 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 146

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Field  Test Name   Test Method  Location  

Microbiological  Enumeration of Culturable Microorganisms (22°C and  EN ISO 6222  Gebze 

test for   36°C) 
drinking water   Detection and Enumeration of Intestinal Enterococci  EN ISO 7899‐2  Gebze 
Membrane Filtration Technique ISO 7899‐2
Detection and Enumeration of Pseudomonas  EN ISO 16266  Gebze 
aeruginosa Membrane Filtration Technique 

Enumeration of E. Coli and Coliform Membrane  EN ISO 9308‐1  Gebze 

Filtration Technique 
chemical  ICP‐MS Method Determination of: Aluminum (Al),  EN ISO 17294‐2  Gebze 
analysis of  Boron (B), Barium (Ba), Calcium (Ca), Cadmium (Cd), 
drinking water   Chromium (Cr), Copper (Cu), Iron (Fe), Mercury (Hg), 
Potassium (K), Magnesium (Mg), Manganese (Mn), 
Sodium Na), Nickel (Ni), Phosphorus (P), Lead (Pb), 
Antimony (Sb), Selenium (Se) 
Determination of Fluoride, Chloride, Nitrite/Nitrite  ISO 10304‐1  Gebze 
Nitrogen , Nitrate Nitrate Nitrogen,  EN ISO 10304‐ 
Phosphate/Phosphate Phosphors Bromide and sulfate 
Ion Chromatography Method 
  Determination of dissolved cations (Li+, Na+, NH4,  EN ISO 14911  Gebze 
Mn2+, Ca2+, Mg2+) Ion Chromatography Method  ISO 14911 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 147

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

TSE calibration scope

Calibration field Calibration item Range CMC Location

Thermal Liquid‐In‐Glass  ‐80 °C ≤ T ≤ 5 °C   0,014 °C Gebze

Thermometers   5 °C < T ≤ 80 °C   0,016 °C
  80 °C < T ≤ 150 °C   0,032 °C
  150 °C < T ≤ 250 °C   0,035 °C
  250 °C < T ≤ 420 °C   0,040 °C
Resistance thermometers  ‐38,8344 °C ≤ T ≤ 29,7646 °C    0,003 °C   Gebze
(SPRT and PRT) (Triple point of mercury, Triple   
point of water, Gallium melting   
  point)  
0,01 °C ≤ T ≤ 29,7646 °C (Triple    0,002 °C
point of water, Gallium melting   
  point)  
0,01 °C ≤ T ≤ 419,527 °C (Triple    0,003 °C
point of mercury, Triple point   
of water, Gallium melting   
  point)   0,004 °C
0,01 °C ≤ T ≤ 419,527 °C (The   
  freezing point of tin)  
0,01 °C ≤ T ≤ 419,527 °C (The    0,006 °C
  freezing point of zinc)  
0,01 °C ≤ T ≤ 660,323 °C (Triple    0,004 °C
point of mercury, Triple point   
of water, Gallium melting    0,005 °C
  point)  
0,01 °C ≤ T ≤ 660,323 °C (The    0,007 °C
  freezing point of tin)  
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]   0,01 °C ≤ T ≤ 660,323 °C (The    0,007 °C 148
QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal Resistance thermometers    freezing point of zinc)   0,001 °C   Gebze

(SPRT and PRT)(continue) 0,01 °C ≤ T ≤ 660,323 °C   
  (Freezing point of aluminum)   0,014 °C
  0,01 °C (Triple point of water)  
‐80 °C ≤ T ≤ 5 °C (in water    0,016 °C
  baths)  
5 °C < T ≤ 80 °C (in water baths)  
80 °C < T ≤ 150 °C (in water    0,032 °C
  baths)  
150 °C < T ≤ 250 °C (in water   
  baths)   0,035 °C
250 °C < T ≤ 420 °C (in water   
  baths)  
‐40 °C ≤ T ≤ 155 °C (in block    0,040 °C
  calibrators)  
155 °C < T ≤ 700 °C (in block    0,1 °C
  calibrators)  
 
  0,2 °C
Thermocouples   ‐40 °C ≤ T ≤ 420 °C   0,2 °C   Gebze
  100 °C ≤ T ≤ 900 °C   0,8 °C
  900 °C < T ≤ 1350 °C   1,5 °C
  ‐40 °C ≤ T ≤ 700 °C   0,7 °C

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 149

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal Temperature Gauges   80 °C ≤ T ≤ 5°C   0,014 °C   Gebze

  5 °C < T ≤ 80 °C   0,016 °C
  80 °C < T ≤ 150 °C   0,032 °C
  150 °C < T ≤ 250 °C   0,035 °C
  250 °C < T ≤ 420 °C   0,040 °C
  50 °C < T ≤ 300 °C   1,9 °C
  300 °C < T ≤ 500 °C   2,8 °C
  100 °C ≤ T ≤ 900 °C   0,8 °C
  900 °C < T ≤1350 °C   1,5 °C
  ‐40 °C ≤ T ≤ 155 °C   0,1 °C
  155 °C < T ≤ 700 °C   0,2 °C
Dry Block Calibrators   ‐40 °C ≤ T ≤ 420 °C   0,1 °C   Gebze
  100 °C ≤ T ≤ 1100 °C   0,6 °C
  1100 °C < T ≤ 1350 °C   1,0 °C
Radiation Thermometers   ‐40 °C ≤ T ≤ 50 °C   1,0 °C   Gebze
  50 °C < T ≤ 550 °C   1,0 °C
  550 °C < T ≤ 1000 °C   2,0 °C
Determination of  ‐40 °C ≤ T ≤ 100 °C   0,7 °C Gebze (On‐site calibration)
Temperature Distribution    100 °C < T ≤ 250 °C   1,0 °C
in Temperature Controlled    30 % rh ≤ RH ≤ 90 % rh   3 % rh
Volumes
(Sterilizer, Incubator, Oven, 
Air Conditioning Cabinet, 
Deep Freezer, Cold Room, 
Fridge, Water bath)

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 150

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal Temperature Indicator or    0 °C ≤ T ≤ 1820 °C (Type B)   0,7 °C   Gebze
Electrical Temperature    ‐50 °C ≤ T ≤ 1760 °C (Type S)   0,5 °C
Simulator (Measuring    ‐50 °C ≤ T ≤1760 °C (Type R)   0,5 °C
mode)   ‐270 °C ≤ T ≤1370 °C (Type K)   0,2 °C
  ‐210 °C ≤ T ≤1200 °C (Type J)   0,1 °C
  ‐270 °C ≤ T ≤1300 °C (Type N)   0,2 °C
  ‐270 °C ≤ T ≤1000 °C (Type E)   0,1 °C
  ‐270 °C ≤ T ≤ 400 °C (Type T)   0,1 °C
  ‐200 °C ≤ T ≤ 650 °C (Pt 100)   0,05 °C
Ash Furnace 100 °C ≤ T ≤ 900 °C   3,0 °C Gebze
  900 °C < T ≤ 1200 °C   4,0 °C
Electrical   0 °C ≤ T ≤ 1820 °C (Type B)   0,7 °C   Gebze
Temperature   ‐50 °C ≤ T ≤ 1760 °C (Type S)   0,5 °C
Simulator   ‐50 °C ≤ T ≤ 1760 °C (Type R)   0,5 °C
(Source   ‐270 °C ≤ T ≤1370 °C (Type K)   0,2 °C
Mode)   ‐210 °C ≤ T ≤1200 °C (Type J)   0,1 °C
  ‐270 °C ≤ T ≤1300 °C (Type N)   0,2 °C
  ‐270 °C ≤ T ≤1000 °C (Type E)   0,1 °C
  ‐270 °C ≤ T ≤ 400 °C (Type T)   0,1 °C
  ‐200 °C ≤ T ≤ 650 °C (Pt 100)   0,02 °C
Industrial Resistance    0°C   33 m°C Gebze, Bursa ‐ Comparison 
Thermometer   ‐40 °C ≤ t ≤ 90 °C   0,04 °C   Method
  ‐25 °C ≤ t ≤ 150 °C   0,30 °C
  150 °C ≤ t ≤ 660 °C   0,82 °C
 
 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 151

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal Temperature gauge with    0°C   33 m°C Gebze, Bursa ‐ Comparison 

  display   ‐40 °C ≤ t ≤ 90 °C   0,04 °C   Method
  ‐25 °C ≤ t ≤ 150 °C   0,30 °C
  150 °C ≤ t ≤ 660 °C   0,80 °C
  ice point 
water / alcohol bath Block 
Calibrator (using external 
reference resistance 
  thermometer) Block Calibrator
Determination of    ‐40 °C ≤ t ≤ 250 °C   0,86 °C Gebze, Bursa ‐ On‐site 
Temperature Distribution      calibration (oven, sterilizer, 
in Temperature Controlled  incubator, freezer, 
  Volumes   refrigerator, cabinet etc.)
Relative Humidity   Relative Humidity Meter   9,0 % rh ≤ RH ≤ 10,0 % rh   0,22 % rh Gebze (On‐site or in 
(Analog and digital        laboratory)
temperature / humidity    10,0 % rh < RH ≤ 15,0 % rh   0,36 % rh
meters, Hygrometers,     
Relative Humidity    15,0 % rh < RH ≤ 40,0 % rh   0,54 % rh
Generator, Thermography,     
  etc.)   40,0 % rh < RH ≤ 50,0 % rh   0,65 % rh
   
  50,0 % rh < RH ≤ 75,0 % rh   0,90 % rh
   
  75,0 % rh < RH ≤ 95,0 % rh   1,15 % rh

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 152

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Relative Humidity Analog and Digital    0 °C ≤ T ≤ 70 °C   0,22 °C Gebze (On‐site or in 

Temperature / Humidity        laboratory)
Meters   ‐40 °C ≤ T ≤ 250 °C   1,30 °C
Thermography etc.
Relative Humidity 
Generator Temperature
Dew Point Meter   ‐10,00 °C FP ≤ T < 0,00 °C DP 0,88 °C  Gebze (On‐site or in 
    DP/FP   laboratory)
  0,00 °C DP ≤ T ≤ 60,00 °C DP   0,50 °C DP
Wood Moisture Meter   3,0 % mc ≤ MC ≤ 35,5 % mc   1,75 % mc   Gebze
Pressure Relative Pressure 100 Pa ≤ p ≤ 2,5 kPa   0,8 Pa Gebze (On‐site or in 
Analog and Digital Pressure        laboratory)
Gauges, Pressure    2,5 kPa < p < 5 kPa   2 Pa
Calibrator, Pressure 
Transducer/Transmitter, U 
Manometer, Differential 
Manometer, Manometer, 
Barometer etc.
Relative / Absolute    5 kPa ≤ p ≤ 350 kPa   4 ∙ 10‐5 ∙ p Gebze (On‐site or in 
Pressure       laboratory)
Analog and Digital Pressure    0,35 MPa < p ≤ 7 MPa 5 ∙ 10‐5 ∙ p + 
Gauges, Pressure    1,5 Pa
Calibrator, Pressure 
Transducer/Transmitter, U 
Manometer, Differential 
Manometer, Manometer, 
Barometer etc.

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 153

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Pressure Relative / Negative  7 MPa < p ≤ 13,5 MPa 4 ∙ 10‐5 ∙ p +  Gebze (On‐site or in 

(Vacuum) Relative Pressure     50 Pa   laboratory)
Analog and Digital Pressure    ‐95 kPa ≤ p ≤ ‐5 kPa  
Gauges, Pressure    4 ∙ 10‐5 ∙ p
Calibrator, Pressure 
Transducer/Transmitter, U 
Manometer, Differential 
Manometer, Manometer, 
Barometer etc.
Relative / Absolute    0,4 MPa ≤ p ≤ 160 MPa 4 ∙ 10‐5∙ p +  Gebze (On‐site or in 
Pressure  Analog and    200 Pa   laboratory)
Digital Pressure Gauges,
Pressure Calibrator,  
Pressure  Transducer/ 
Transmitter, U Manometer, 
Differential Manometer, 
Manometer, Barometer 
Electrical DC Voltage U 100µV≤U<200mV   2 ∙ 10‐5 ∙ U Gebze, Ankara, Bursa
Source Calibration   200 mV ≤ U < 2 V   5 ∙ 10‐6 ∙ U
  2 V ≤ U < 20 V   5 ∙ 10‐6 ∙ U
  20 V ≤ U < 200 V   7 ∙ 10‐6 ∙ U
  200 V ≤ U ≤ 1000 V   7 ∙ 10‐6 ∙ U
DC Current I   100µA≤I<200µA   3 ∙ 10‐5 ∙ I   Gebze, Ankara, Bursa
Source Calibration   200 µA ≤ I < 2mA   3 ∙ 10‐5 ∙ I
  2mA ≤ I < 20 mA   3 ∙ 10‐5 ∙ I
  20 mA≤I<200mA   5 ∙ 10‐5 ∙ I
  200 mA ≤ I < 2 A   2 ∙ 10‐4 ∙ I
  2 A ≤ I ≤ 20 A   5 ∙ 10‐4 ∙ I

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 154

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Resistance R   100 µΩ   1 . 10‐3 . R   Gebze, Ankara, Bursa

4‐Point Resistance    1 mΩ   2 . 10‐4 . R
Calibration   10 mΩ   2 . 10‐4 . R
  100 mΩ   2 . 10‐4 . R
DC Resistance R   10 mΩ ≤ R < 2 Ω   5 ∙ 10‐5 ∙ R   Gebze, Ankara, Bursa
Resistance Calibration   2 Ω ≤ R ˂ 20 Ω   2 ∙ 10‐5 ∙ R
  20 Ω ≤ R ˂ 200 Ω   2 ∙ 10‐5 ∙ R
  200 Ω ≤ R ˂ 2 kΩ   2 ∙ 10‐5 ∙ R
  2 kΩ ≤ R ˂ 20 kΩ   2 ∙ 10‐5 ∙ R
  20 kΩ ≤ R ˂ 200 kΩ   2 ∙ 10‐5 ∙ R
  200 kΩ ≤ R ˂ 2 MΩ   2 ∙ 10‐5 ∙ R
  2 MΩ ≤ R ˂ 20 MΩ   4 ∙ 10‐5 ∙ R
  20MΩ≤ R ˂200MΩ   3 ∙ 10‐4 ∙ R
  200 MΩ ≤ R ≤ 1 GΩ   3 ∙ 10‐3 ∙ R
  10 mΩ ≤ R < 2 Ω   5 ∙ 10‐5 ∙ R
  2 Ω ≤ R ˂ 20 Ω   2 ∙ 10‐5 ∙ R
  20 Ω ≤ R ˂ 200 Ω   2 ∙ 10‐5 ∙ R
  200 Ω ≤ R ˂ 2 kΩ   2 ∙ 10‐5 ∙ R
  2 kΩ ≤ R ˂ 20 kΩ   2 ∙ 10‐5 ∙ R
  20 kΩ ≤ R ˂ 200 kΩ   2 ∙ 10‐5 ∙ R
  200 kΩ ≤ R ˂ 2 MΩ   2 ∙ 10‐5 ∙ R
  2 MΩ ≤ R ˂ 20 MΩ 1,5 ∙ 10‐4 ∙ R
  20MΩ≤ R ˂200MΩ   3 ∙ 10‐3 ∙ R
  200 MΩ ≤ R ≤ 1 GΩ   3 ∙ 10‐3 ∙ R
  2 MΩ ≤ R < 20 MΩ   5 ∙ 10‐5 ∙ R
  20MΩ≤ R ˂200MΩ   5 ∙ 10‐4 ∙ R
  200 MΩ ≤ R ≤ 1 GΩ   5 ∙ 10‐3 ∙ R

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 155

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical AC Voltage U 10mV≤ U <200mV   2∙10‐4 ∙ U Gebze, Ankara, Bursa

Source Calibration   10mV≤ U <200mV   5∙10‐4 ∙ U
  10mV≤ U <200mV   1∙10‐3 ∙ U
  200 mV ≤ U < 2 V   2∙10‐4 ∙ U
  200 mV ≤ U < 2 V   3∙10‐4 ∙ U
  200 mV ≤ U < 2 V   8∙10‐4 ∙ U
  200 mV ≤ U < 2 V   6∙10‐3 ∙ U
  200 mV ≤ U < 2 V   4∙10‐2 ∙ U
  2 V ≤ U < 20 V   2∙10‐4 ∙ U
  2 V ≤ U < 20 V   3∙10‐4 ∙ U
  2 V ≤ U < 20 V   8∙10‐4 ∙ U
  2 V ≤ U < 20 V   6∙10‐3 ∙ U
  2 V ≤ U < 20 V   4∙10‐2 ∙ U
  20 V ≤ U < 200 V   2∙10‐4 ∙ U
  20 V ≤ U < 200 V   3∙10‐4 ∙ U
  20 V ≤ U < 200 V   8∙10‐4 ∙ U
  200 V ≤ U ≤ 1000 V   2∙10‐4 ∙ U
  200 V ≤ U ≤ 1000 V   3∙10‐4 ∙ U
AC Current I   200 μA ≤ I < 2 mA   6 . 10‐4 . I   Gebze, Ankara, Bursa
Source Calibration   200 μA ≤ I <2 mA   1 . 10‐3 . I
  200 μA ≤ I <2 mA   5 . 10‐3 . I
  2 mA ≤ I < 20 mA   6 . 10‐4 . I
  2 mA ≤ I < 20 mA   1 . 10‐3 . I
  2 mA ≤ I < 20 mA   5 . 10‐3 . I
  20 mA ≤ I < 200 mA   8 . 10‐4 . I
  20 mA ≤ I < 200 mA   1 . 10‐3 . I
  20 mA ≤ I < 200 mA   5 . 10‐3 . I
  200 mA ≤ I < 2 A   1 . 10‐3 . I

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 156

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical AC Current I   200 mA ≤ I < 2 A   1 . 10‐3 . I   Gebze, Ankara, Bursa

Source Calibration    200 mA ≤ I < 2 A   4 . 10‐3 . I
(continue)   2 A ≤ I ≤ 20 A   1,2 . 10‐3 . I
  2 A ≤ I ≤ 20 A   3 . 10‐3 . I

DC Voltage U   100 μV ≤ U < 220 mV 1,5 . 10‐5 . U    Gebze, Ankara, Bursa

Calibration of Measuring    220 mV ≤ U < 2,2 V   1 . 10‐5 . U
Instruments   2,2 V ≤ U < 11 V 1,2 . 10‐5 . U
  11 V ≤ U < 22 V   1 . 10‐5 . U
  22 V ≤ U < 220 V   1 . 10‐5 . U
  220 V ≤ U ≤1000 V   1 . 10‐5 . U
DC Current I   2,2 A ≤ I < 3 A   1 . 10‐3 . I   Gebze, Ankara, Bursa
Calibration of Measuring    3 A ≤ I < 11 A   1 . 10‐3 . I
Instruments   11 A ≤ I ≤ 20 A   1 . 10‐3 . I
DC Current I 20 A ≤ I ≤ 1000 A   1 . 10‐2 . I Gebze, Ankara
Calibration of Measuring 
Instruments
DC Resistance R   100 µΩ   1 . 10‐3 . R   Gebze, Ankara, Bursa
Resistance Measurement    1 mΩ   3 . 10‐4 . R
Instruments Calibration   10 mΩ   3 . 10‐4 . R
  100 mΩ   1 . 10‐4 . R
  1 Ω   5 . 10‐5 . R
  10 Ω   5 . 10‐5 . R
  100 Ω   5 . 10‐5 . R
  1 kΩ   5 . 10‐5 . R
  10 kΩ   5 . 10‐5 . R
  100 kΩ   1 . 10‐4 . R

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 157

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Resistance R   1 Ω   2 . 10‐4 . R   Gebze, Ankara, Bursa
Resistance Measurement    1,9 Ω   2 . 10‐4 . R
Instruments Calibration    10 Ω   5 . 10‐5 . R
(continue)   19 Ω   4 . 10‐5 . R
  100 Ω   2 . 10‐5 . R
  190 Ω   2 . 10‐5 . R
  1 kΩ   2 . 10‐5 . R
  1,9 kΩ   2 . 10‐5 . R
  10 kΩ   2 . 10‐5 . R
  19 kΩ   2 . 10‐5 . R
  100 kΩ   2 . 10‐5 . R
  190 kΩ   2 . 10‐5 . R
  1 MΩ   3 . 10‐5 . R
  1,9 MΩ   3 . 10‐5 . R
  10 MΩ   5 . 10‐5 . R
  19 MΩ   6 . 10‐5 . R
DC Resistance R 1 Ω ≤ R < 11 Ω 2 . 10‐4 . R +  Gebze, Ankara, Bursa
Resistance Measurement    11Ω ≤ R < 33 Ω   1 mΩ
Instruments Calibration   33 Ω ≤ R < 110 Ω   2 . 10‐4 . R
  110 Ω ≤ R < 330 Ω   1 . 10‐4 . R
  330 Ω ≤ R < 1,1 kΩ   6 . 10‐5 . R
  1,1 kΩ ≤ R < 3,3 kΩ   6 . 10‐5 . R
  3,3 kΩ ≤ R < 11 kΩ   6 . 10‐5 . R
  11 kΩ ≤ R < 33 kΩ   6 . 10‐5 . R
  33 kΩ ≤ R < 110 kΩ   6 . 10‐5 . R
  110 kΩ ≤ R < 330 kΩ   6 . 10‐5 . R
  330 kΩ ≤ R < 1,1 MΩ   8 . 10‐5 . R
  1,1 MΩ ≤ R < 3,3 MΩ   6 . 10‐5 . R

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 158

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Resistance R   3,3 MΩ ≤ R < 11 MΩ 1,5 . 10‐4 . R   Gebze, Ankara, Bursa

Resistance Measurement    11 MΩ ≤ R < 33 MΩ   2 . 10‐4 . R
Instruments Calibration   33 MΩ ≤ R < 110 MΩ   8 . 10‐4 . R
(continue)   110 MΩ ≤ R < 330 MΩ   8 . 10‐4 . R
  6 . 10‐3 . R
Insulation Resistance    1 MΩ ≤ R < 1 GΩ 1,5 ∙ 10‐3 ∙ R   Gebze, Ankara
Measuring Instruments /    1 GΩ ≤ R < 10 GΩ 2,5 ∙ 10‐3 ∙ R
High Resistance Measuring    10 GΩ ≤ R ≤ 100 GΩ   3,5 ∙ 10‐3 ∙ R
Instruments Calibration
Earth Resistance Tester   10 mΩ ≤ R < 4 Ω   0,7 mΩ   Gebze, Ankara
  4 Ω ≤ R ≤ 100 kΩ   2 ∙ 10‐4 ∙ R
AC Current I   2,2 A ≤ I < 3 A   2 . 10‐3 . I   Gebze, Ankara
Calibration of Measuring    3 A ≤ I < 11 A   2 . 10‐3 . I
Instruments   11 A ≤ I ≤ 20 A   2 . 10‐3 . I
AC Voltage U   2,2 mV ≤ U < 22 mV   6 . 10‐3 . U   Gebze, Ankara, Bursa
Calibration of Measuring    2,2 mV ≤ U < 22 mV   1 . 10‐3 . U
Instruments   2,2 mV ≤ U < 22 mV   1 . 10‐3 . U
  2,2 mV ≤ U < 22 mV   1 . 10‐3 . U
  2,2 mV ≤ U < 22 mV   2 . 10‐3 . U
  2,2 mV ≤ U < 22 mV   5 . 10‐3 . U
  2,2 mV ≤ U < 22 mV   5 . 10‐3 . U
  2,2 mV ≤ U < 22 mV   5 . 10‐3 . U
  22 mV ≤ U < 220 mV   1 . 10‐3 . U
  22 mV ≤ U < 220 mV   5 . 10‐4 . U
  22 mV ≤ U < 220 mV   5 . 10‐4 . U
  22 mV ≤ U < 220 mV   5 . 10‐4 . U
  22 mV ≤ U < 220 mV   2 . 10‐3 . U

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 159

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical AC Voltage U   22 mV ≤ U < 220 mV   2 . 10‐3 . U   Gebze, Ankara, Bursa

Calibration of Measuring    22 mV ≤ U < 220 mV   2 . 10‐3 . U
Instruments (continue)   22 mV ≤ U < 220 mV   5 . 10‐3 . U
AC Voltage U   220 mV ≤ U < 2,2 V   1 . 10‐3 . U   Gebze, Ankara, Bursa
Calibration of Measuring    220 mV ≤ U < 2,2 V   2 . 10‐4 . U
Instruments   220 mV ≤ U < 2,2 V   2 . 10‐4 . U
  220 mV ≤ U < 2,2 V   2 . 10‐4 . U
  220 mV ≤ U < 2,2 V   6 . 10‐4 . U
  220 mV ≤ U < 2,2 V   6 . 10‐4 . U
  220 mV ≤ U < 2,2 V   2 . 10‐3 . U
  220 mV ≤ U < 2,2 V   5 . 10‐3 . U
  2,2 V ≤ U < 22 V   1 . 10‐3 . U
  2,2 V ≤ U < 22 V   2 . 10‐4 . U
  2,2 V ≤ U < 22 V   1 . 10‐4 . U
  2,2 V ≤ U < 22 V   2 . 10‐4 . U
  2,2 V ≤ U < 22 V   3 . 10‐4 . U
  2,2 V ≤ U < 22 V   6 . 10‐4 . U
  2,2 V ≤ U < 22 V   2 . 10‐3 . U
  2,2 V ≤ U < 22 V   5 . 10‐3 . U
  22 V ≤ U < 220 V   1 . 10‐3 . U
  22 V ≤ U < 220 V   2 . 10‐4 . U
  22 V ≤ U < 220 V   1 . 10‐4 . U
  22 V ≤ U < 220 V   5 . 10‐4 . U
  22 V ≤ U < 220 V   6 . 10‐4 . U
  220 V ≤ U ≤ 1000 V   2 . 10‐4 . U

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 160

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Power P   0,1 W ≤ P ≤ 20 kW   1,2 . 10‐3 . P   Gebze, Ankara

Calibration of DC Power 
Meters
AC Power P   0,1 W ≤ P ≤ 20 kW   2 . 10‐3 . P   Gebze, Ankara
AC Power Measurement     
Calibration    
Active Power  Three Phase   0 W‐36000 W   0,15 . 10‐3
   
Reactive Power  Three    0 W‐36000 Var   0,15 . 10‐3
Phase    
Active Energy  Three Phase   500 mWs‐3000Ws   0,20 . 10‐3
   
AC Energy    
Reactive Energy Three    500 mVars‐ 3000 Vars   0,20 . 10‐3
Phase
Oscilloscope 2 ns ≤ t ≤ 50 ms   6 . 10‐4 . t Gebze, Ankara
Calibration    
Horizontal Deflection   0,1 s ≤ t ≤ 0,5 s   1 . 10‐3 . t
   
  1 s ≤ t ≤ 5 s   5 . 10‐3 . t
Oscilloscope   5 mV ≤ U ≤ 100 V 2,5 . 10‐3    Gebze, Ankara
Calibration . UPP + 100 
Vertical deflection   µV
Oscilloscope Calibration 5 mV ≤ U ≤ 5 V 3 . 10‐3  Gebze, Ankara
Vertical deflection . UPP + 100 
  µV

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 161

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Time and Frequency Meters   10 kHz ≤ f ≤ 20 GHz   1,55∙ r   Gebze, Ankara

Frequency Frequency Counter   10 kHz ≤ f ≤ 20 GHz 4,0∙10‐
  11∙ f + r
Frequency Meters 60 rpm ≤ ω < 99999 rpm 3,0∙10‐ Gebze, Ankara
Optical Tachometer   6∙ω + r rpm

Frequency Sources 1 Hz ≤ f ≤ 26,5 GHz   1,55∙r Gebze, Ankara

Frequency Generator   1 Hz ≤ f < 30 kHz   2,0∙10‐6 Hz
  30 kHz ≤ f < 300 MHz   3,0∙10‐10∙ f
  300 MHz ≤ f < 14 GHz   3,0∙10‐11∙ f
  14 GHz ≤ f ≤ 26,5 GHz   1 Hz
Chronometer, Stopwatch   ‐30,00 s/day ≤ t ≤ +30,00 s/day   0,04 s/day   Gebze, Ankara
   
  1 s < t ≤ 28800 s  
  0,100 s
Inductance Meters   100 μH 1,5 . 10‐3 . L   Gebze, Ankara
   
LCR Meters: Inductance   1 mH   8 . 10‐4 . L
  10 mH   8 . 10‐4 . L
  100 mH   8 . 10‐4 . L
  1 H   8 . 10‐4 . L
Capacitance Meters 1 nF   6 . 10‐3 . C Gebze, Ankara
  10 nF   1 . 10‐3 . C
LCR Meters: Capacitance   100 nF   7 . 10‐4 . C
  1 μF   7 . 10‐4 . C

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 162

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

TSE Sojuztest calibration Laboratories

-Turkey

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 163

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Voltage measuring device <  100 µV ≤ U ≤ 1 mV 3,5 ∙ 10‐2 ∙ U Kayseri

1100 V   1 mV ≤ U < 9,9m V   4,3 ∙ 10‐3 ∙ U  
  10 mV ≤ U < 329,9m V   4,8 ∙ 10‐4 ∙ U
  3,3 V ≤ U < 32,9 V   8,6 ∙ 10‐5 ∙ U
  33  ≤ U ≤ 329,9 V   8,7 ∙ 10‐5 ∙ U
  330 ≤ U < 1000 V   9,2 ∙ 10‐5 ∙ U
    8,2 ∙ 10‐5 ∙ U
DC Voltage source device <    100 µV ≤ U ≤ 1 mV   5,0∙ 10‐2 ∙U   Kayseri
1100 V   1 mV ≤ U < 200 m V   2,1∙ 10‐3 ∙U  
  0,2 mV ≤ U < 2 V   3,1∙ 10‐5 ∙U
  2 V ≤ U < 20 V   2,4∙ 10‐5 ∙U
  20 V ≤ U < 200 V   5,2∙ 10‐5 ∙U
  200 V ≤ U < 1000 V   3,4∙ 10‐5 ∙U
DC Current measuring devices 0,1 mA ≤ / < 3,29 m A 1, 5. 10‐3. I Kayseri
  3,3 mA ≤ / < 32,9 m A   4, 8. 10‐4. I  
  33 mA ≤ / < 32,9 m A   4, 6. 10‐4. I
  0,3 A ≤ / < 2,19 A   2, 1. 10‐3. I
  2,2 A ≤ / < 10 A   1, 8. 10‐3. I
  10 A ≤ / < 16,49 A   8, 1. 10‐3. I
  16,5 A ≤ / < 149,9 A   1, 6. 10‐2. I
  150 A ≤ / < 550 A   1, 0. 10‐2. I
 
 

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 164

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Current source devices   0,1 mA ≤ / < 2 m A   8, 7. 10‐4. I   Kayseri
  2 mA ≤ / < 20 m A   6, 4. 10‐4. I  
  20 mA ≤ / < 200 m A   6, 7. 10‐4. I
  0,2 A ≤ / < 2 A   1, 1. 10‐3. I
  2 A ≤ / < 11 A   2, 7. 10‐2. I
  10 A ≤ / < 50 A   8, 2. 10‐2. I
  50 A ≤ / < 1000 A   3, 8. 10‐2. I
DC Resistance Measuring    120 µΩ   7,7 . 10‐3 . R   Kayseri 
device   500 µΩ   5,9 . 10‐3 . R  
1<G Ω   1MΩ ≤ R ≤ 5 MΩ   1,1 . 10‐3 . R
  5MΩ ≤ R ≤ 20 MΩ   7,5 . 10‐4 . R
  20 MΩ ≤ R ≤ 500 MΩ   6,8 . 10‐4 . R
  0,5 Ω ≤ R ≤ 10 MΩ   3,7 . 10‐4 . R
  10 Ω ≤ R ≤ 100 MΩ   6,1 . 10‐4 . R
  100 Ω ≤ R ≤ 100 MΩ   6,6 . 10‐4 . R
  1 MΩ ≤ R ≤ 1 GΩ   6,5 . 10‐3 . R
DC Resistance Measuring  1 Ω  ≤ R ≤ 11 Ω   1,6 . 10‐2 . R   Kayseri
device   11 Ω  ≤ R ≤ 33 Ω   2,1 . 10‐3 . R  
  110 Ω  ≤ R ≤ 330 Ω   3,1 . 10‐4 . R
  330 Ω  ≤ R ≤ 1,1 Ω   2,9 . 10‐4 . R
  1,1kΩ  ≤ R ≤ 3,3 kΩ   5,0 . 10‐4 . R
  3,3k Ω  ≤ R ≤ 11 kΩ   2,1 . 10‐4 . R
  11kΩ  ≤ R ≤ 33 kΩ   5,2 . 10‐4 . R
  33kΩ  ≤ R ≤ 110 kΩ   2,4 . 10‐4 . R
  110 kΩ  ≤ R ≤ 330  kΩ
  5,4 . 10‐4 . R
  330 kΩ  ≤ R ≤ 1,1 kΩ
  3,3 . 10‐4 . R
  1,1kΩ  ≤ R ≤ 3,3 MΩ
  9,7 . 10‐4 . R
  1,1 MΩ  ≤ R ≤ 3,3 MΩ
  1,5 . 10‐3 . R

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 165

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Resistance Measuring  3,3 MΩ  ≤ R ≤ 11 MΩ 6,0 . 10‐3 . R Kayseri

device   11 MΩ  ≤ R ≤ 33 MΩ   6,5 . 10‐3 . R
  33 MΩ  ≤ R ≤ 110 MΩ  
  110 MΩ  ≤ R ≤ 330 MΩ
DC Voltage source Devices  0,1 MΩ  ≤ R ≤ 1 MΩ 2,3 . 10‐3 . R Kayseri
4‐ Pin Resistance Calibration   1 MΩ  ≤ R ≤ 5 MΩ   9,2 . 10‐4 . R  
  5 MΩ  ≤ R ≤ 20 MΩ   6,6 . 10‐4 . R
  100 MΩ  ≤ R ≤ 500 MΩ   6,4 . 10‐4 . R
  0,5 MΩ  ≤ R ≤ 10 MΩ   1,9 . 10‐4 . R
DC Voltage source Devices    1 Ω  ≤ R ≤ 20 Ω   2,6 . 10‐4 . R   Kayseri
  20  Ω  ≤ R ≤ 200 Ω   7,7 . 10‐5 . R  
  0,2 kΩ  ≤ R ≤ 2 kΩ   3,5 . 10‐5 . R
  2 kΩ  ≤ R ≤ 20 kΩ   3,4 . 10‐5 . R
  20 kΩ  ≤ R ≤ 200 kΩ   4,6 . 10‐5 . R
  0,2 MΩ  ≤ R ≤ 2 MΩ   8,5 . 10‐5 . R
  2 MΩ  ≤ R ≤ 20 MΩ   3,0 . 10‐4 . R
  20 MΩ  ≤ R ≤ 200 MΩ   7,0 . 10‐3 . R
  0,2 GΩ  ≤ R ≤ 1 GΩ   2,5 . 10‐3 . R
AC Voltage measuring device    10 mV ≤ U ≤ 330 mV   2,9 . 10‐3 . U   Kayseri
<1100 V   0,33 V ≤ U ≤ 3,3 V   8,2 . 10‐4 . U  
  3,3 V ≤ U ≤ 33 V   7,8 . 10‐4 . U
  33 V ≤ U ≤ 330 V   8,4 . 10‐4 . U
  330  V ≤ U ≤ 1000 V   8,8 . 10‐4 . U
  10 mV ≤ U ≤ 200 mV   4,3 . 10‐3 . U
  200 mV ≤ U ≤ 2 mV   2,4 . 10‐3 . U
  2 V ≤ U ≤ 20 V   2,5 . 10‐3 . U
  20 V ≤ U ≤ 200 V   1,4 . 10‐3 . U
  200 V ≤ U ≤ 1000 V   2,5 . 10‐3 . U

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 166

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical AC Voltage measuring device      2,2 . 10‐3 . U   Kayseri

<1100 V (continue)   2,5 . 10‐3 . U  
  2,2 . 10‐3 . U
  2,0 . 10‐3 . U
  1,5 . 10‐3 . U
AC Current Measurement    0,1 mA ≤ I ≤ 3,3 mA   4,9 . 10‐3 . I   Kayseri
devices   3,3  mA ≤ I ≤ 33 mA   2,2 . 10‐3 . I  
  33 mA ≤ I ≤ 330 mA   2,3 . 10‐3 . I
  0,33 A ≤ I ≤ 2,2 A   2,5 . 10‐3 . I
  2,2 A ≤ I ≤ 11 A   2,2 . 10‐3 . I
   
  10 A ≤ I ≤ 16,49 A   1,0 . 10‐2 . I
  16,5 A ≤ I ≤ 149,99 A   2,4 . 10‐2 . I
  150 A ≤ I ≤ 550  A   1,4 . 10‐2 . I
AC Current   0,1 mA ≤ I ≤ 2 mA   8,3 . 10‐3 . I   Kayseri
Source Device   2 mA ≤ I < 20 mA   6,6 . 10‐3 . I  
  20 mA ≤ I < 200 mA   6,6 . 10‐3 . I
  0,2 A ≤ I ≤ 3,3 mA   5,3 . 10‐3 . I
  20 mA ≤ I < 2 A   6,6 . 10‐3 . I
    5,3 . 10‐3 . I
  1 A ≤ I ≤ 10 A   7,0 . 10‐3 . I
  10 A ≤ I ≤ 50 A   5,7 . 10‐3 . I
  50 A ≤ I ≤ 600 A   8,9 . 10‐3 . I
    1,4 . 10‐1 . I
  5,3 . 10‐2 . I

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 167

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Electrical DC Power Measuring Device   10,9W < P ≤  297 W   7,9 . 10‐4 . P   Kayseri

  29,7 W < P ≤  726 W   2,1 . 10‐3 . P  
  0,73 kW < P ≤  11 kW   8,1 . 10‐3 . P
   
 
AC Voltage    1,9 W < P < 297 W   2,6 . 10‐3 . P   Kayseri
Measurement Device   29,7 W < P ≤ 726 W    
  0,73 kW < P ≤ 11  kW   2,6 . 10‐3 . P
    8,4 . 10‐3 . P
 
Capacitance Measurement  10,29 nF ≤ C ≤ 32,999 nF 1,4 . 10‐2 . C Kayseri
Devices   33 nF ≤ C ≤ 109,99 nF   1,2 . 10‐2 . C  
  110 nF ≤ C ≤ 329,99 nF   6,8 . 10‐3 . C
  0,33 µF ≤ C ≤ 1,09  µF   1,2 . 10‐2 . C
  1,1 µF ≤ C ≤ 3,29  µF   7,9 . 10‐3 . C
  3,3 µF ≤ C ≤ 10,99 µF   1,3 . 10‐2 . C
  11 µF ≤ C ≤ 32,99  µF   8,4 . 10‐3 . C

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 168

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Time and Time and Frequency    1 s  ≤ t  ≤ 3600 s 9,2 . 10‐3 . s   Kayseri

Frequency Time Counter Devices    
Chronometer  
Time and Frequency  60 rpm ≤ w ≤ 900 rpm 901 rpm  0,08 rpm    Kayseri
Angular Velocity ≤ w ≤ 9000 rpm  0,10 rpm   
Tachometer 9001 rpm ≤ w ≤ 90000 rpm 1,00 rpm
Time and Frequency  1,0 Hz ≤ f ≤ 119,99 Hz 120 Hz ≤  2,4 ∙ 10⁻³ ∙ f  Kayseri
Measurement Device f ≤ 1199,9 Hz 1,2 kHz ≤ f ≤  1,2 ∙ 10⁻³ ∙ f  
11,999 kHz   1,1 ∙ 10⁻² ∙ f 
12 kHz ≤ f ≤ 119,99 kHz  1,1 ∙ 10⁻² ∙ f
120 kHz ≤ f ≤ 1199,9 kHz  1,1 ∙ 10⁻² ∙ f 
 1,2 MHz ≤ f ≤ 2,00 MHz 1,8 ∙ 10⁻² ∙ f
Time and Frequency   60 rpm ≤ w ≤ 900 rpm 901 rpm  0,11 rpm  Kayseri
Angular Velocity ≤ w ≤ 9000 rpm 9001 rpm ≤ w ≤  0,70 rpm   
Tachometer 90000 rpm 7,00 rpm
Centrifuge, mixing devices
Time and Frequency   1,00 Hz ≤ f ≤ 120 kHz 120 kHz ≤  3,8 . 10⁻⁴ . f    Kayseri
Source devices f ≤ 1200kHz 1,2 MHz ≤ f ≤ 15  3,5 . 10⁻⁴ . f   
Frequency   MHz 3,6 . 10⁻⁴ . f
Cos ø – meter   0° ≤ δ ≤ 180 °   7,0 . 10⁻³ . δ   Kayseri
Measurement    0 ≤ pF ≤ 1  
Devices

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 169

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal Thermocouple  Measurement    B Type  600 °C ≤ T ≤ 1820 °C   0,51 °C   Kayseri

Devices   J Type  ‐210 °C ≤ T ≤ 1200 °C   0,34 °C  
( Temperature Indıcators )    K Type  ‐200 °C ≤ T ≤ 1200 °C   0,35 °C
  L Type    ‐200 °C ≤ T ≤ 900 °C   0,35 °C
  N Type  ‐200 °C ≤ T ≤ 1300 °C   0,36 °C
   R Type    100 °C ≤ T ≤ 1767 °C   0,40 °C
  S Type   100 °C ≤ T ≤ 1767 °C   0,42 °C
  T Type     ‐250 °C ≤ T ≤ 400 °C   0,35 °C
  U type ‐200 °C ≤ T ≤ 600 °C   0,34 °C
Thermocouple B Type  350 °C ≤ T ≤ 1820 °C   0,50 °C Kayseri
  Simulators   J Type    ‐200 °C ≤ T ≤ 760 °C   0,34 °C  
  K Type ‐200 °C ≤ T ≤ 1200 °C   0,34 °C
  L Type    ‐200 °C ≤ T ≤ 900 °C   0,34 °C
  N Type ‐200 °C ≤ T ≤ 1300 °C   0,35 °C
  R Type     100 °C ≤ T ≤ 1767 °   0,38 °C
  C  S Type 100 °C ≤ T ≤ 1767 °C   0,40 °C
  T Type    ‐250 °C ≤ T ≤ 400 °C   0,34 °C
  U Type   ‐200 °C ≤ T ≤ 600 °C   0,33 °C
Thermocouple  Measurement    B Type  600 °C ≤ T ≤ 1820 °C   0,40 °C   Kayseri
  Devices   J Type  ‐210 °C ≤ T ≤ 1200 °C   0,10 °C
  ( Temperature Indıcators )   K  Type ‐200 °C ≤ T ≤ 1200 °C   0,12°C
  L Type    ‐200 °C ≤ T ≤ 900 °C   0,12°C
  N Type ‐200 °C ≤ T ≤ 1300 °C   0,18°C
   R Type    100 °C ≤ T ≤ 1767 °C   0,36°C
  S Type   100 °C ≤ T ≤ 1767 °C   0,38°C
  T Type      ‐250 °C ≤ T ≤ 400 °C    0,12°C
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 170
  U Type       ‐200 °C ≤ T ≤ 600 °C   0,10°C QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal RTD Measurement Device ‐200 °C ≤ T ≤ 800 °C   0,06 °C Kayseri

( Temperature Indıcators )  

RTD Simulators ‐200 °C ≤ T ≤ 630 °C   0,04 ⁰C Kayseri

 

DC High Voltage Devices  1 kV ≤ U ≤ 40 kV   0,91 % Kayseri

( Source‐ Divider >1000V )  

AC High Voltage Devices  1 kV ≤ U ≤ 40 kV   0,58 % Kayseri

( Source‐ Divider >1000V )  
İndicating Temperature ‐40 °C ≤ T ≤ 250 °C   0,10 °C Kayseri
measurement device   ‐40 °C < T ≤ 650 °C   0,15 °C  
  650 °C < T ≤ 1200 °C   2,3 °C
   
Liquid in glass thermometer   ‐40 °C ≤ T ≤ 200 °C   0,15 °C   Kayseri
   
Temperature Distribution    ‐40 °C ≤ T ≤ 90 °C   0,80 °C   Kayseri
Determination in Temperature    ‐40 °C ≤ T ≤ 90 °C   0,80 °C  
Controlled volumes   90 °C < T ≤ 210 °C   1,30 °C
(Drying oven, incubator,     
sterilizer, stove, water bath, 
conditioning chamber etc.)
Muffle Furnaces   300 °C ≤ T ≤ 1250°C   2,60 °C   Kayseri
     
Infra‐red Thermometer   50 °C ≤ T ≤ 5000 °C   2,0 °C   Kayseri
Thermal Camera      

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 171

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Thermal Autoclave   30 °C ≤ T ≤ 143 °C   0,5 °C   Kayseri

    0,08 Bar  
Block calibrator   ‐50 °C ≤ T ≤ 400 °C   0,15 °C   Kayseri
  400 °C < T ≤ 650 °C   0,30 °C  
  6500 °C < T ≤ 1200 °C   2,50 °C
Digital or Analog Temperature    15 °C ≤ T ≤ 30 °C   0,7 °C   Kayseri
Measurement device    
( wall or table type )  
Relative Humidity Digital or Analog Relative  20 % rh ≤ RH ≤  80  % rh 3,0 % rh   Kayseri
Humidity Measurement Device
80 % rh ≤ RH ≤  95 % rh 3,7 % rh

Pressure Relative Pressure  ‐0,20 bar ≤ p ≤ 0,20 bar 3,5 ∙10⁻⁴ bar  Kayseri

Analog and Digital Pressure    ‐0,85 bar ≤ p ≤ ‐0,1 bar 8,2 ∙10⁻³ bar   
Gauges,   0,2 bar ≤ p ≤ 20 bar 8,2 ∙10⁻³ bar 
Pressure Calibrator, 20 bar ≤ p ≤ 350 bar 60 bar ≤ p    0,23 bar
U manometer   ≤ 600 bar   5,6 ∙10⁻² bar
Differential Pressure Gauge
Force Meterial test Machines 1 N ≤ F ≤ 1000 kN 150 kN ≤ F ≤    % 0,16 Kayseri
Calibration of Force   3000 kN   % 0,32  
Measurement systems
Tensile Test machine
Compression Test Machine
Tensile/ Compression Test 
Machine
Meterial test Machines   200 kN ≤ F ≤ 3000 kN   % 0,32   Kayseri
Cpncrate Test Machine  

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 172

QSD/LL/AL/V12/2018
 ‫ﻫﻴﺌﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺠﻮﺩﺓ ﻭ ﺍﻟﺴﻼﻣﺔ‬
‫ ﻭﺣﺪﺓ ﻣﺮﺍﻗﺒﺔ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬- ‫ﻗﺴﻢ ﺍﻟﻤﺨﺘﺒﺮﺍﺕ‬

Calibration field Calibration item Range CMC Location

Hardness Calibration of Brinell Hardness  HBW 2,5/62,5    % 2,0 . HBW   Kayseri

Measurement Machines HBW 2,5/187,5   
HBW 5/750 
HBW 10/3000
Calibration of Vickers Hardness  HV 0,2    % 2,0 . HV   Kayseri
Measurement Machines HV 0,3  
 HV 0,5
 HV 1 
HV 5 
HV 10
Calibration of Rockwell  20 ≤ HRA ≤ 88    0,5 HRA   Kayseri
Hardness Measurement  20 ≤ HRB ≤ 100    1,0 HRB  
Machines 20 ≤ HRC ≤ 70    0,5 HRC
73 ≤ HR15T ≤ 93    1,0 HRT
43 ≤ HR30T ≤ 82    1,0 HRT
12 ≤ HR45T ≤ 72    1,0 HRT
70 ≤ HR15N ≤ 91    1,0 HRN
42 ≤ HR30N ≤ 80    1,0 HRN
20 ≤ HR45N ≤ 70   1,0 HRN
Examination / Calibration of  L ≤ 20 mm   1,5x 10⁻³ ∙ L Kayseri
Optical Track Measurement     
Equipment in Hardness  On condition 
Measurement Test Machines that it is not 
smaller 
  than(μm) 0,5

Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected] 173

QSD/LL/AL/V12/2018
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

Approved Laboratories Contact Details

1. Local Laboratories:

No. Laboratory Name Tel. Fax P.O. Box E. Mail

1 (Element Doha) ‫ﺇﻟﻳﻣﻧﺕ ﺍﻟﺩﻭﺣﺔ‬ 44603202 44603246 23650 [email protected]
2 (ACES) ‫ﺍﻟﻣﺭﻛﺯ ﺍﻟﻌﺭﺑﻲ ﻟﻠﺩﺭﺍﺳﺎﺕ ﺍﻟﻬﻧﺩﺳﻳﺔ‬ 44870141 44870146 19579 [email protected]
3 (ACTS) ‫ﺧﺩﻣﺎﺕ ﺗﻛﻧﻭﻟﻭﺟﻳﺎ ﺍﻻﻧﺷﺎءﺍﺕ ﺍﻟﻣﺗﻁﻭﺭﺓ‬ 44601257 44601254 22159 [email protected]
4 (Gulf Lab) ‫ﺷﺭﻛﺔ ﺍﻟﺧﻠﻳﺞ ﻟﻠﻣﺧﺗﺑﺭﺍﺕ‬ 44607034 44607628 4024 [email protected]
5 (Tech Lab) ‫ﺍﻟﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﺗﻘﻧﻳﺔ‬ 44603251 44600952 5652 [email protected]
6 (QEL) ‫ﻗﻁﺭ ﻟﻠﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﻬﻧﺩﺳﻳﺔ‬ 44515401 44515317 40278 [email protected]
7 (Pioneer) ‫ﻣﺧﺗﺑﺭﺍﺕ ﺑﻳﻭﻧﻳﺭ‬ 4469 0362 44514407 41028 [email protected]
8 (Teyseer Labs) ‫ﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﺗﻳﺳﻳﺭ‬ 44621254 44568977 1556 [email protected]
9 (DTL) ‫ﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﺩﻭﺣﺔ ﺍﻟﻔﻧﻳﺔ‬ 44607508 44607552 40462 [email protected]
10 (Fugro) ‫ﺷﺭﻛﺔ ﻓﻭﺟﺭﻭ ﻭﺷﺑﻪ ﺍﻟﺟﺯﻳﺭﺓ ﻟﻠﺧﺩﻣﺎﺕ‬ 44601075 44601076 47167 [email protected].
11 (QGEC) ‫ﻗﻁﺭ ﻟﻠﺑﻳﺋﻳﺔ ﻭﻫﻧﺩﺳﺔ ﺍﻟﺗﺭﺑﺔ‬ 44501473 44501573 22054 [email protected]
12 (BATLABS) ‫ﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﺑﺭﺍﺣﺔ ﺍﻟﻔﻧﻳﺔ‬ 44501701 44509326 8294 [email protected]
13 (JEL) ‫ﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﺟﺯﻳﺭﺓ ﻭﺍﻟﻣﻌﺎﻣﻝ ﺍﻟﻬﻧﺩﺳﻳﺔ ﻟﺿﺑﻁ ﺍﻟﺟﻭﺩﺓ‬ 44604941 44604934 300 [email protected]
14 (ITL) ‫ﺍﻟﻣﺧﺗﺑﺭ ﺍﻟﻔﻧﻲ ﺍﻟﻌﺎﻟﻣﻲ‬ 44554309 44554310 37986 [email protected]
15 (QIL) ‫ﻣﺧﺗﺑﺭﺍﺕ ﻗﻁﺭ ﺍﻟﺻﻧﺎﻋﻳﺔ‬ 44601580 44601739 10451 [email protected]
16 (CTL) ‫ﻣﺟﻣﻭﻋﺔ ﻣﺧﺗﺑﺭﺍﺕ ﻛﻭﻧﺳﺗﺭﻛﺷﻥ ﺗﻛﻧﻭﻟﻭﺟﻲ‬ 40370130 - 706 [email protected]
   

     

 
174 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

2. Calibration laboratories:
City-
No. Laboratory Name Tel. Fax P.O. Box E. Mail
Country
Doha-
1 (LABTECH ) ‫ﻻﺑﺗﻳﻙ ﻟﺧﺩﻣﺎﺕ ﺍﻟﻣﻌﺎﻳﺭﺓ‬ Qatar  40299729 40298242 15481 [email protected] 

Doha-
(BNGESC) ‫ﻣﺭﻛﺯ ﺍﻟﺑﺩﺭ ﻟﺧﺩﻣﺔ ﺍﻷﺟﻬﺯﺓ ﻭﺍﻟﻣﻘﺎﻳﻳﺱ‬
2 ‫ﺍﻟﻧﻭﻭﻳﺔ‬ Qatar 44607508 44607552 40570 [email protected]

Doha-
3 PROMPET ‫ﺍﻟﻌﺎﺟﻝ ﻟﺧﺩﻣﺎﺕ ﺍﻟﻣﻌﺎﻳﺭﺓ‬ Qatar 44115771 44418969 24067 [email protected]

175 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]                                                
 ‫ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ‬
‫ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ‬
  ‫ ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬- ‫ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ‬

3. Abroad laboratories

City- P.O.
No. Laboratory Name Tel. Fax E. Mail
Country Box
‫ﻣﺧﺗﺑﺭﺍﺕ ﻟﻭﻧﺳﺗﺎﺭ ﺍﻟﻔﺎ ﻋﻣﺎﻥ‬ Muscat 00968-24501524 - 1197 [email protected] 
Lonestar alpha laboratories -
Oman
[email protected]
Sahar 00968-26751755 - 84

1 Salala 00698-23213390 - 1887

Duqm  - 1197
00698-99278040

‫ﻣﺧﺗﺑﺭﺍﺕ ﺍﻟﻣﻭﺍﺻﻔﺎﺕ ﺍﻟﺗﺭﻛﻳﺔ‬ [email protected]

Ankara
2 +90.312.4166712 +90 3124166255 06100
Turkish Standards Institution [email protected]
Laboratories (TSE)

TSE Sojuztest calibration Ankara +90 312 385 67 85 +90 31238595 81 - [email protected]
Laboratories
[email protected]

176 
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&[email protected]