Workstation

Sphera® Desktop Pro 8.7

Installation Guide
Desktop Pro 8.7 Installation Guide
May 16, 2017

© 2017 Sphera. For internal use only. No portion of this publication may be reproduced, reused, or otherwise distributed in any form
without prior written consent of Sphera Solutions, Inc. (“Sphera”).

TRADEMARKS

Sphera and the Sphera logo are trademarks of Sphera. Other trademarks appearing in this publication are the property of Sphera or
their respective owners.

Customer Care

For assistance or inquiries regarding Desktop Pro, contact Customer Care:

• Visit the Sphera Customer Network (SCN) at SCN.Spherasolutions.com. To access frequently asked questions and to report
any issues using the SCN, you must request a user name and password.
• Send an email to [email protected].
• Call +1 866-203-3791 (North America, toll free) or +1 303-217-5673 (outside North America, toll).
Table of contents

Desktop Pro Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1 Desktop Pro Installation

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Desktop Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing FMEA-Pro, FMEA-Med, PHA-Pro, RiskSafe, or SVA-Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing FTA-Pro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2 Post Installation Configuration

Starting the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Authorizing your License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Applying for your License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Authorizing your Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Changing File Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3 Desktop Pro Upgrade

Downloading Updates from SCN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Changes to expect after upgrading to Desktop Pro 8.7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Upgrading Desktop Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Maintaining Shortcuts after Reinstalling in a Different Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4 Desktop Pro Uninstallation

Uninstalling Desktop Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

A Third-party Components and Open Source Software Notices

Third-party Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Open Source Software Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Crypto++ License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
lookup2.c Public Domain License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PixieLib License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SNIPPETS Public Domain License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
The Code Project Open License (CPOL) 1.02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Zlib License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

3
Desktop Pro 8.7 Installation Guide

Index ........................................................................................................................ 35

4
 Preface

This section includes the following topics:

• Desktop Pro Overview

5
Desktop Pro 8.7 Installation Guide

Desktop Pro Overview

Desktop Pro includes the following suite of products:

• FMEA-Med®
• FMEA-Pro®
• FTA-Pro®
• PHA-Pro®
• RiskSafe®
• SVA-Pro®
• FMEA-Med and FMEA-Pro: FMEA-Med and FMEA-Pro applications are designed specifically for
performing a Failure Mode and Effects Analysis (FMEA) of any product and process. It includes
many user-friendly and time-saving features that assist users to complete an FMEA.
• FTA-Pro: FTA-Pro is a comprehensive software for conducting your Fault Tree Analysis. It is
designed with the specific needs of manufacturers in mind. It provides expert guidance for
studying a full range of products to help companies identify potential problems in order to eliminate
them, or at least reduce their likelihood of occurring and minimize their harmful effects.
• PHA-Pro: PHA-Pro application is designed specifically for conducting a Process Hazards Analysis
(PHA) in a wide variety of industrial settings. It supports the most commonly used PHA
methodologies and provides many features that empower users to complete studies quickly and
efficiently.
• RiskSafe: RiskSafe is designed specifically for performing workplace risk assessments. It
includes many user-friendly and time-saving features that empower users to complete risk
assessments.
• SVA-Pro: SVA-Pro enables companies to improve their security systems through detailed Security
Vulnerability Analysis (SVA) studies. SVA-Pro provides templates and preformatted worksheets to
help teams get started quickly.

6
 1
Desktop Pro Installation

This chapter provides step-by-step instructions to install the Desktop Pro software. If you are upgrading
from an earlier version of a product, see the Desktop Pro Upgrade.

This section includes the following topics:

• System Requirements
• Installing Desktop Pro

7
Desktop Pro 8.7 Installation Guide

System Requirements
Refer to the Desktop Pro System Requirements document for the system requirements for installing
and running the Desktop Pro suite of products.

8
 Installing Desktop Pro

Installing Desktop Pro

All Desktop Pro products can be installed either on a single workstation or on a network server for
several users. To successfully install and run Desktop Pro, you must be able to install the program by
one of the following:
• Internet access that supports file downloads.
• Networked shared drive containing the setup files

The maximum number of users that can use any Desktop Pro software at a given time is equal to the
number of licenses that you have purchased. For example, if you have purchased three licenses and
they are all being used, the fourth person attempting to open the product is placed in 'queue' for access.

Note: You must have administrator privileges for installing this software. Contact your Information
Systems Specialist for assistance if necessary.

Note: You must run the installer as an administrator. You can do this by right-clicking the installation
package and selecting Run as Administrator. Contact your Information Systems Specialist for
assistance if necessary.

Installing FMEA-Pro, FMEA-Med, PHA-Pro, RiskSafe, or SVA-Pro

To install FMEA-Pro, FMEA-Med, PHA-Pro, RiskSafe, and SVA-Pro:
1. Download the package from the SCN and run the .exe file.
The Welcome to Setup Wizard window opens.
2. Click Next.
The End-User License Agreement screen opens.
3. Click I accept the terms in the License Agreement.
4. Click Next.
The Choose Setup Type screen opens.
5. Click Workstation.
The Install Location screen opens.
6. If you want to change the location where the software should be installed, type the new location in
the text field.
By default, the products are installed to C:/Program Files/<Desktop Pro product name>.
7. Select the language that you want the software to use from the list.
Note: If you are going to use Right to Left or Asian Languages:
• Click Start.
• Go to Control Panel > Regional and Languages Support.
• Click Languages.
• Ensure that the following check boxes are selected:
• Install files for complex script and right-to-left languages (Including Thai)
• Install files for East Asian languages

9
Desktop Pro 8.7 Installation Guide

When you select these boxes, you may have to install additional Windows files.
8. Click Next.
The Ready to Install window opens.
9. Click Install.
The selected Desktop Pro software is installed.
10. Click Finish.

The first time you open the software, the License Configuration dialog box opens. It asks for a license
to authorize the copy of the product. For information on authorizing your software, see Authorizing your
License.

Installing FTA-Pro
To install FTA-Pro:
1. Download the package from the SCN and run the .msi file.
The End-User License Agreement screen opens.
2. Click I accept the terms in the License Agreement.
3. Click Next.
The Select Install Folder dialog box opens.
4. If you want to change the location where the software should be installed, type the new location in
the text field.
By default, the products are installed to C:\Program Files\FTA-Pro.
5. Click Next.
The Ready to Install window opens.
6. Click Install.
FTA-Pro is installed.
7. Click Finish.

The first time you open the software, the License dialog box opens. It asks for a license to authorize
the copy of the product. For information on authorizing your software, see Authorizing your License.

10
 2
Post Installation Configuration

This chapter provides information on the configurations that you must carry out after installation,
including Desktop Pro software licensing.

This section includes the following topics:

• Starting the Software
• Authorizing your License
• Changing File Locations

11
Desktop Pro 8.7 Installation Guide

Starting the Software

You need administrator privileges only when installing the software. To run the software, you do not
need administrator privileges. If you do run the software as an administrator, some activities are
disabled to protect your computer’s security. To re-enable the activities, run the software as a regular
user.

To start the Desktop Pro software on your computer:

1. On the Start menu, click Programs.
2. Select the applicable <Desktop Pro product> folder
3. Click the associated <Desktop Pro product> icon.
The software opens on your screen.
Note: If you are starting the product for the first time, see Authorizing your License.

12
 Authorizing your License

Authorizing your License

Once you have installed the Desktop Pro software, you must authorize it using a license. This is a two
stage process. You apply for a license from Sphera and when you receive the license, you use it to
authorize your copy of the software.

Applying for your License

The first time you open the software, the License Configuration dialog box opens. To apply for the
license, you must complete the License Configuration form and e-mail it to us. You will receive a file
containing the license key that allows you to use the Desktop Pro software.

To apply for your license:

1. Click Request a License.
The Request License dialog box opens.
2. Complete the following fields with details about yourself and your company:
• Name
• Title
• Company
• Department
• Phone
• Extension
• E-mail Address
3. From the Type of License list, select the one of the following types of licenses:
• Free Workstation Evaluation (time-limited)
• Free Network Evaluation (time-limited)
• Full Workstation License
• Full Network License
4. In the Serial # field, type the serial number of the software. (Required for full license types)
5. In the Notes field, type any additional information.
6. Type the following information about your account manager or customer care representative:
• Name
• E-mail address
7. Click one of the following:
• Send Request by E-mail Now
• Save Request to File
Note: The latter option is required if you use web-based email or unsupported email software. You
must email the file to [email protected].
Tip: If you are saving the request to a file, we recommend that you save the file to your Desktop.
This will make the file easier to find when you email the request.

13
Desktop Pro 8.7 Installation Guide

A file containing the license key is emailed to you.

Authorizing your Copy

After you receive the license, save it to your computer and apply it to the software. After this is done,
you can use the software.

To authorize your copy of the Desktop Pro software:

1. Open the email reply from Sphera Customer Care.
2. Save the attachment from the email.
3. Use the Save As dialog box to save the key to the same folder as the key request.
4. Open the Desktop Pro software.
The License dialog box opens.
5. Click Load License from File.
The Open dialog box opens.
6. Using the Look in field, navigate to the folder containing the license.
7. Select the file containing the license key.
8. Click Open.
Your copy of the Desktop Pro software is licensed and ready for use.

14
 Changing File Locations

Changing File Locations

You can control where the software stores your application files, templates, libraries, and backup files.

To change the folder where files, templates, libraries, and backup files are stored:
1. Open the applicable Desktop Pro software.
2. Click Tools > Options.
The Options dialog box opens.
3. Click the File Locations tab.
This tab lists the following folders and their location on your computer system:
• Documents
• Template Files
• Library Files
• Auto-Backup Files
Note: The Data Files are also listed but without a location. These files contain the change logs and
revision history and should not be moved.
4. To change the storage folder, do one of the following:
• Double-click the folder.
• Click the folder and then click Modify.
The Browse for Folder dialog box opens. The current folder appears highlighted in the list.
5. Click the desired folder.
6. Click OK to close the Browse for Folder dialog box.
7. In the Options dialog box, click OK.

15
Desktop Pro 8.7 Installation Guide

16
 3
Desktop Pro Upgrade

Sphera regularly updates its software to add new features, deal with known issues and otherwise
improve the quality of its products. Registered owners of Desktop Pro software can always download
the latest update from the SCN. Installing an update does not void your existing license.

When you upgrade Desktop Pro software, it uses the last language set.

Note: The language setting is found in the regedit file. When you uninstall Desktop Pro software, the
file is not affected, and the settings are retained. The new version uses the regedit file settings. If you
want to clear the settings, you must go into regedit and clear the setting manually.

This section includes the following topics:

• Downloading Updates from SCN
• Changes to expect after upgrading to Desktop Pro 8.7
• Upgrading Desktop Pro
• Maintaining Shortcuts after Reinstalling in a Different Location

17
Desktop Pro 8.7 Installation Guide

Downloading Updates from SCN

To download an update of Desktop Pro from SCN:
1. Run the applicable Desktop Pro software.
2. Go to Help > About <Desktop Pro product name>.
The About dialog box opens. Under Version, the dialog box displays the version number of the
software that is installed on your computer system.
3. Record this number on a piece of paper.
4. Click OK.
The dialog box closes.
5. Open Internet Explorer and go to http://scn.spherasolutions.com.
6. Log in with your user name and password.
7. Navigate to the download page for product updates.
8. Compare the version number displayed on this web page with the information you recorded in step
3.
9. If the information is the same, your copy of Desktop Pro software is up-to-date.
10. If an update is available, click the download link and follow the instructions on your screen.

18
 Changes to expect after upgrading to Desktop Pro 8.7

Changes to expect after upgrading to Desktop

Pro 8.7
The introduction of new templates in Desktop Pro 8.7 has resulted in some changes to the application
folders and files.

The following changes take effect after you upgrade to Desktop Pro 8.7 (or install Desktop Pro 8.7 on a
computer which had the application installed previously):
1. Any files that are saved in the following locations:
• C:\Program Files (x86)\<application name>\Sample Studies
• C:\Program Files (x86)\<application name>\Templates
• C:\Program Files (x86)\<application name>\Libraries
are moved into the following folders respectively:
• C:\Users\<user name>\My Documents\<application name> Documents
• C:\Users\<username>\My Documents\<application name> Documents\Templates
• C:\Users\<user name>\My Documents\<application name> Documents\Libraries
Any modified files in those locations which have the same name as an installed sample Study,
template, or library (including files installed by previous versions of the application) are instead
moved to the following locations:
• C:\Users\<user name>\AppData\Local\VirtualStore\Program Files (x86)\<application
name>\Sample Studies\backup
• C:\Users\<user name>\AppData\Local\VirtualStore\Program Files (x86)\<application
name>\Templates\backup
• C:\Users\<user name>\AppData\Local\VirtualStore\Program Files (x86)\<application
name>\Libraries\backup
The movement of files occurs the first time the application is run after the upgrade.
2. Users are unable to save Studies in any location under the C:\Program Files (x86) folder.
3. The default locations for Templates and Libraries:
• C:\Program Files (x86)\<application name>\Templates
• C:\Program Files (x86)\<application name>\Libraries
are automatically changed to the following after upgrade:
• C:\Users\<user name>\My Documents\<application name> Documents\Templates
• C:\Users\<user name>\My Documents\<application name> Documents\Libraries
Templates and Libraries sub-folders are created automatically.
4. The installed templates and libraries are accessible from the Installed Templates and Installed
Libraries shortcuts in the above folders.
5. The shortcuts to the installed Templates and Libraries folders located in the C:\Users\<user
name>\My Documents\<application name> Documents folder are removed after the upgrade.
Folders with the same names are created instead (see 3).

19
Desktop Pro 8.7 Installation Guide

6. If the Libraries folder is left at the default setting, the Active Libraries list in the Workspace pane
shows libraries from both these folders:
• C:\Users\<user name>\My Documents\<application name> Documents\Libraries
• C:\Program Files (x86)\<application name>\Libraries: Libraries in this folder has the text "[
Installed Libraries ]" appended to distinguish them from the user's own libraries. Libraries in
this folder are not displayed if the Installed Libraries shortcut is removed (see 4).
7. Some libraries installed by previous versions of the application are replaced by newer libraries with
different names. The earlier libraries are available in the following location: C:\Program Files
(x86)\<application name>\Libraries\Legacy Libraries.
The application looks for Active libraries in both the original location and in the “Legacy Libraries”
subfolder of that location, if the subfolder is present. This applies to any location, and not only the
installed Libraries folder.

20
 Upgrading Desktop Pro

Upgrading Desktop Pro

Before you upgrade any Desktop Pro software, take a backup of your existing templates, libraries, and
sample studies folders.

To upgrade your Desktop Pro software:

1. Uninstall the existing Desktop Pro software release.
Note: Do not delete the License folder. If you delete the License folder, you must contact
Customer Care to request a new license.
For more information see Uninstalling Desktop Pro.
2. Install the new Desktop Pro release at the same location as the previous release.
Note: If you want to install the new release at a different location, change the license location to
the new path.
For more information see Installing Desktop Pro.

21
Desktop Pro 8.7 Installation Guide

Maintaining Shortcuts after Reinstalling in a

Different Location
The application creates the following folders automatically when it starts. These folders are used as the
default locations for Studies, libraries, and templates:
• <user name>\My Documents\<Desktop Pro product name> Documents
• <user name>\My Documents\<Desktop Pro product name> Documents\Libraries
• <user name>\My Documents\<Desktop Pro product name> Documents\Templates

When each of these folders is created, a corresponding shortcut is also created, which points to the
Sample Studies, Libraries or Templates folder in the installation location:
• <user name>\My Documents\<Desktop Pro product name> Documents\Sample Studies
• <user name>\My Documents\<Desktop Pro product name> Documents\Libraries\Installed
Libraries
• <user name>\My Documents\<Desktop Pro product name> Documents\Templates\Installed
Templates

These shortcuts are not created if the folders already exist. They are also not updated if you reinstall
the application later in a different location, unless the existing shortcuts point to locations on the C: drive
that no longer exist.

To recreate and/or update the shortcuts:

1. Close the application.
2. Rename the "<user name>\My Documents\<Desktop Pro product name> Documents" folder to
something else.
3. Run the application to automatically create the folder again.
4. Move or copy all of your files from the old (renamed) folder into the recreated folder.

22
 4
Desktop Pro Uninstallation

This chapter describes the procedure to uninstall Desktop Pro.

This section includes the following topics:

• Uninstalling Desktop Pro

23
Desktop Pro 8.7 Installation Guide

Uninstalling Desktop Pro

When you install any Desktop Pro software, the setup program also adds an uninstall program to your
system. The uninstall program records the activity during the installation process. You can use this
program to safely remove the Desktop Pro software from your computer.

Note: Uninstalling Desktop Pro software from your computer terminates your license and may cause
the loss of data.

To uninstall any Desktop Pro software:

1. On the Start menu, click Programs.
2. Open the <Desktop Pro Product Name> folder.
3. Click Uninstall <Desktop Pro Product Name>.
A confirmation dialog box opens.
4. Click Yes.
The associated Desktop Pro software is removed from your system.

24
 A
Third-party Components and Open
Source Software Notices
This section includes the following topics:
• Third-party Components
• Open Source Software Notices

25
Desktop Pro 8.7 Installation Guide

Third-party Components
Desktop Pro products use the following third-party licensed components, which are installed by the
respective installers:
.

Company Software Version

ComponentOne 2D and 3D Charting Components (Studio for 8.0.20082.87

LLC ActiveX / Chart)

CrypKey (Canada) CrypKey Software Licensing System 7.1

Inc.

IBM ILOG 1.5.0.0

Microsoft© Visual Visual C++ 2015 CRT redistributables 14.0.23918.0

Studio© 2015
Visual C++ 2015 MFC redistributables 14.0.23918.0

Microsoft Windows Windows Universal Common Runtime 10.0.10586.212

Kits 10 redistributables

Symantec Symantec Verisignsoft VeriSign Class 3 Code

Signing 2010 CA

Syncfusion Inc. Syncfusion Essential Suite 4.101.0.57

Wintertree Software Sentry Spelling Checker 5.14.10

Inc.

26
 Third-party Components and Open Source Software Notices

Open Source Software Notices

Open source components are used in the development of Desktop Pro products. They are covered
under the following licenses.

Crypto++ License
The following software components are used and licensed under Crypto++ License.

Software Copyright Notice

cryptopp521.zip Copyright © 1995-2010 by Wei Dai

License Agreement

Compilation Copyright (c) 1995-2013 by Wei Dai. All rights reserved.

This copyright applies only to this software distribution package as a compilation, and does not imply a
copyright on any particular file in the package.

All individual files in this compilation are placed in the public domain by Wei Dai and other contributors.

I would like to thank the following authors for placing their works into the public domain:

Joan Daemen - 3way.cpp

Leonard Janke - cast.cpp, seal.cpp

Steve Reid - cast.cpp

Phil Karn - des.cpp

Andrew M. Kuchling - md2.cpp, md4.cpp

Colin Plumb - md5.cpp

Seal Woods - rc6.cpp

Chris Morgan - rijndael.cpp

Paulo Baretto - rijndael.cpp, skipjack.cpp, square.cpp

Richard De Moliner - safer.cpp

Matthew Skala - twofish.cpp

Kevin Springle - camellia.cpp, shacal2.cpp, ttmac.cpp, whrlpool.cpp, ripemd.cpp

Ronny Van Keer - sha3.cpp

The Crypto++ Library (as a compilation) is currently licensed under the Boost Software License 1.0
(http://www.boost.org/users/license.html).

Boost Software License - Version 1.0 - August 17th, 2003

27
Desktop Pro 8.7 Installation Guide

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the
software and accompanying documentation covered by this license (the "Software") to use, reproduce,
display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software,
and to permit third-parties to whom the Software is furnished to do so, all subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, this
restriction and the following disclaimer, must be included in all copies of the Software, in whole or in
part, and all derivative works of the Software, unless such copies or derivative works are solely in the
form of machine-executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL
THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY
DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.

lookup2.c Public Domain License

The following software components are used and licensed under lookup2.c Public Domain License.

Software Copyright Notice

lookup2.c lookup2.c, by Bob Jenkins, December 1996, Public Domain

License Agreement

lookup2.c, by Bob Jenkins, December 1996, Public Domain.

hash(), hash2(), hash3, and mix() are externally useful functions.

Routines to test the hash are included if SELF_TEST is defined.

You can use this free for any purpose. It has no warranty.

PixieLib License
The following software components are used and licensed under PixieLib License.

Software Copyright Notice

subclass.cpp PixieLib(TM) Copyright 1997-1998 Paul DiLascia

subclass.h

License Agreement

THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

28
 Third-party Components and Open Source Software Notices

LICENSE AGREEMENT: You may compile PixieLib.NET into applications that you distribute to others
provided that you include the following text along with your own Copyright notice in every source file
that uses PixieLib: "Portions of this program borrowed from PixieLib.NET, Copyright 2005 Paul
DiLascia." You may not remove the Copyright message or credits in the PixieLib source files.

You may NOT distribute the PixieLib.NET source code in whole or part to others. You may NOT include
PixieLib source code as part of an open-source project or place it under GPL (General Public License)
or public domain! For example, you may NOT publish a CD of "101 Programming Gems" that includes
portions of PixieLib as one of the gems. This restriction is inherited from Microsoft.

SNIPPETS Public Domain License

The following software components are used and licensed under SNIPPETS Public Domain License.

Software Copyright Notice

jdn.c public domain Julian Day Number functions

License Agreement

Welcome to SNIPPETS!

All the code I put into SNIPPETS for distribution is Public Domain or free to the best that I can
determine. What this means is that:
1. I know or can contact the original author(s) to verify the presumed copyright ownership, and
2. The work bears an explicit Public Domain notice, or
3. The work is copyrighted but includes a free use license, or
4. The work was published without a copyright notice prior to the effective date of the new copyright
law.

This has been occasionally annoying when I've had to pass up some useful piece of code because it's
questionable whether anyone can use it without incurring liability (distributing someone else's property
makes me an accessory, doncha know).

Since SNIPPETS includes both public domain and free code, be sure to carefully read each header for
any free license restrictions which may apply.

Distribution:

Starting with the December 1992 version, SNIPPETS is distributed in two files:

SNIPmmyy.LZH is the full SNIPPETS collection.

SNPDmmyy.LZH contains only the files changes since the last release.

SNIPPETS is distributed through the FidoNet Programmer's Distribution Network (PDN - see the file
PDN.LST for a list of PDN sites and further information. The SNIPPETS files are also available from my
"home" BBS, Comm Port One, (713) 980-9671, FidoNet address 1:106/2000 using the "magic" F'req
names of "SNIPPETS" and "SNIPDIFF". Various Internet mirror sites also carry SNIPPETS, but I'm not
sure which ones have it an any given time. One place to try is oak.oakland.edu in /pub/msdos/c.

...Bob Stout

29
Desktop Pro 8.7 Installation Guide

The Code Project Open License (CPOL) 1.02

The following software components are used and licensed under The Code Project Open License
(CPOL) 1.02 License.

Software Copyright Notice

colour_picker_s Article Copyright 1999 by Chris Maunder

rc.zip Everything else Copyright © CodeProject, 1999-2013

License Agreement

Preamble

This License governs Your use of the Work. This License is intended to allow developers to use the
Source Code and Executable Files provided as part of the Work in any application in any form.

The main points subject to the terms of the License are:

• Source Code and Executable Files can be used in commercial applications;
• Source Code and Executable Files can be redistributed; and
• Source Code can be modified to create derivative works.
• No claim of suitability, guarantee, or any warranty whatsoever is provided. The software is
provided "as-is".
• The Article accompanying the Work may not be distributed or republished without the Author's
consent

This License is entered between You, the individual or other entity reading or otherwise making use of
the Work licensed pursuant to this License and the individual or other entity which offers the Work
under the terms of this License ("Author").

License

THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CODE PROJECT
OPEN LICENSE ("LICENSE"). THE WORK IS PROTECTED BY COPYRIGHT AND/OR OTHER
APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS
LICENSE OR COPYRIGHT LAW IS PROHIBITED.

BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU ACCEPT AND AGREE
TO BE BOUND BY THE TERMS OF THIS LICENSE. THE AUTHOR GRANTS YOU THE RIGHTS
CONTAINED HEREIN IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND
CONDITIONS. IF YOU DO NOT AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS
LICENSE, YOU CANNOT MAKE ANY USE OF THE WORK.
1. Definitions.
a. "Articles" means, collectively, all articles written by Author which describes how the Source
Code and Executable Files for the Work may be used by a user.
b . "Author" means the individual or entity that offers the Work under the terms of this License.
c . "Derivative Work" means a work based upon the Work or upon the Work and other pre-
existing works.
d . "Executable Files" refer to the executables, binary files, configuration and any required data

30
 Third-party Components and Open Source Software Notices

files included in the Work.

e . "Publisher" means the provider of the website, magazine, CD-ROM, DVD or other medium
from or by which the Work is obtained by You.
f . "Source Code" refers to the collection of source code and configuration files used to create
the Executable Files.
g . "Standard Version" refers to such a Work if it has not been modified, or has been modified in
accordance with the consent of the Author, such consent being in the full discretion of the
Author.
h . "Work" refers to the collection of files distributed by the Publisher, including the Source Code,
Executable Files, binaries, data files, documentation, whitepapers and the Articles.
i. "You" is you, an individual or entity wishing to use the Work and exercise your rights under this
License.
2. Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or restrict any rights
arising from fair use, fair dealing, first sale or other limitations on the exclusive rights of the
copyright owner under copyright law or other applicable laws.
3. License Grant. Subject to the terms and conditions of this License, the Author hereby grants You
a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the applicable copyright)
license to exercise the rights in the Work as stated below:
a . You may use the standard version of the Source Code or Executable Files in Your own
applications.
b . You may apply bug fixes, portability fixes and other modifications obtained from the Public
Domain or from the Author. A Work modified in such a way shall still be considered the
standard version and will be subject to this License.
c . You may otherwise modify Your copy of this Work (excluding the Articles) in any way to create
a Derivative Work, provided that You insert a prominent notice in each changed file stating
how, when and where You changed that file.
d . You may distribute the standard version of the Executable Files and Source Code or
Derivative Work in aggregate with other (possibly commercial) programs as part of a larger
(possibly commercial) software distribution.
e . The Articles discussing the Work published in any form by the author may not be distributed or
republished without the Author's consent. The author retains copyright to any such Articles.
You may use the Executable Files and Source Code pursuant to this License but you may not
repost or republish or otherwise distribute or make available the Articles, without the prior
written consent of the Author.
Any subroutines or modules supplied by You and linked into the Source Code or Executable
Files of this Work shall not be considered part of this Work and will not be subject to the terms
of this License.
4. Patent License. Subject to the terms and conditions of this License, each Author hereby grants to
You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated
in this section) patent license to make, have made, use, import, and otherwise transfer the Work.
5. Restrictions. The license granted in Section 3 above is expressly made subject to and limited by
the following restrictions:
a . You agree not to remove any of the original copyright, patent, trademark, and attribution
notices and associated disclaimers that may appear in the Source Code or Executable Files.

31
Desktop Pro 8.7 Installation Guide

b . You agree not to advertise or in any way imply that this Work is a product of Your own.
c . The name of the Author may not be used to endorse or promote products derived from the
Work without the prior written consent of the Author.
d . You agree not to sell, lease, or rent any part of the Work. This does not restrict you from
including the Work or any part of the Work inside a larger software distribution that itself is
being sold. The Work by itself, though, cannot be sold, leased or rented.
e . You may distribute the Executable Files and Source Code only under the terms of this
License, and You must include a copy of, or the Uniform Resource Identifier for, this License
with every copy of the Executable Files or Source Code You distribute and ensure that anyone
receiving such Executable Files and Source Code agrees that the terms of this License apply
to such Executable Files and/or Source Code. You may not offer or impose any terms on the
Work that alter or restrict the terms of this License or the recipients' exercise of the rights
granted hereunder. You may not sublicense the Work. You must keep intact all notices that
refer to this License and to the disclaimer of warranties. You may not distribute the Executable
Files or Source Code with any technological measures that control access or use of the Work
in a manner inconsistent with the terms of this License.
f . You agree not to use the Work for illegal, immoral or improper purposes, or on pages
containing illegal, immoral or improper material. The Work is subject to applicable export laws.
You agree to comply with all such laws and regulations that may apply to the Work after Your
receipt of the Work.
6. Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED "AS IS", "WHERE IS"
AND "AS AVAILABLE", WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES OR
CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME ALL RISK IN ITS USE,
INCLUDING COPYRIGHT INFRINGEMENT, PATENT INFRINGEMENT, SUITABILITY, ETC.
AUTHOR EXPRESSLY DISCLAIMS ALL EXPRESS, IMPLIED OR STATUTORY WARRANTIES
OR CONDITIONS, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR
PURPOSE, OR ANY WARRANTY OF TITLE OR NON-INFRINGEMENT, OR THAT THE WORK
(OR ANY PORTION THEREOF) IS CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES.
YOU MUST PASS THIS DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR
DERIVATIVE WORKS.
7. Indemnity. You agree to defend, indemnify and hold harmless the Author and the Publisher from
and against any claims, suits, losses, damages, liabilities, costs, and expenses (including
reasonable legal or attorneys’ fees) resulting from or relating to any use of the Work by You.
8. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO
EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU ON ANY LEGAL
THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY
DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK OR OTHERWISE,
EVEN IF THE AUTHOR OR THE PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
9. Termination.
a . This License and the rights granted hereunder will terminate automatically upon any breach by
You of any term of this License. Individuals or entities who have received Derivative Works
from You under this License, however, will not have their licenses terminated provided such
individuals or entities remain in full compliance with those licenses. Sections 1, 2, 6, 7, 8, 9, 10
and 11 will survive any termination of this License.
b . If You bring a copyright, trademark, patent or any other infringement claim against any

32
 Third-party Components and Open Source Software Notices

contributor over infringements You claim are made by the Work, your License from such
contributor to the Work ends automatically.
c . Subject to the above terms and conditions, this License is perpetual (for the duration of the
applicable copyright in the Work). Notwithstanding the above, the Author reserves the right to
release the Work under different license terms or to stop distributing the Work at any time;
provided, however that any such election will not serve to withdraw this License (or any other
license that has been, or is required to be, granted under the terms of this License), and this
License will continue in full force and effect unless terminated as stated above.
10. Publisher. The parties hereby confirm that the Publisher shall not, under any circumstances, be
responsible for and shall not have any liability in respect of the subject matter of this License. The
Publisher makes no warranty whatsoever in connection with the Work and shall not be liable to
You or any party on any legal theory for any damages whatsoever, including without limitation any
general, special, incidental or consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at any time without notice
11. Miscellaneous
a . This License shall be governed by the laws of the location of the head office of the Author or if
the Author is an individual, the laws of location of the principal place of residence of the Author.
b . If any provision of this License is invalid or unenforceable under applicable law, it shall not
affect the validity or enforceability of the remainder of the terms of this License, and without
further action by the parties to this License, such provision shall be reformed to the minimum
extent necessary to make such provision valid and enforceable.
c . No term or provision of this License shall be deemed waived and no breach consented to
unless such waiver or consent shall be in writing and signed by the party to be charged with
such waiver or consent.
d . This License constitutes the entire agreement between the parties with respect to the Work
licensed herein. There are no understandings, agreements or representations with respect to
the Work not specified herein. The Author shall not be bound by any additional provisions that
may appear in any communication from You. This License may not be modified without the
mutual written agreement of the Author and You.

Zlib License
The following software components are used and licensed under Zlib License.

Software Copyright Notice

zlib-1.1.3.zip copyright © 1995-2012 Jean-loup Gailly and Mark Adler

License Agreement

/* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.7, May 2nd, 2012

Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler

This software is provided 'as-is', without any express or implied warranty. In no event will the authors
be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial
applications, and to alter it and redistribute it freely, subject to the following restrictions:

33
Desktop Pro 8.7 Installation Guide

1. The origin of this software must not be misrepresented; you must not claim that you wrote the
original software. If you use this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as
being the original software.
3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]

*/

34
 Index

A R
administrator privileges, 9 regedit, 17
apply, 13 Request, 13
Applying, 13 request, 13
authorize, 13 running, 8
Authorizing, 13
Auto-Backup Files, 15
S
D SCN, 18
serial number, 13
Documents, 15 system requirements, 8

F T
Free Network Evaluation, 13 Template Files, 15
Free Workstation Evaluation, 13
Full Network License, 13
Full Workstation License, 13 U
uninstall, 24
I Uninstallation, 23
Upgrade, 17
install, 9
installing, 8

K
key request, 14

L
Library Files, 15
License Configuration, 10
license key, 13
licensing, 11
Load License from File, 14

35
Desktop Pro 8.7 Installation Guide

36