Scribd
Upload
191 views

Questions For 1e Interview

This document provides a list of topics and skills for crew candidates to review and train on in order to safely and effectively operate the chemical tanker. The topics cover cargo operations like pumping, sampling, and monitoring equipment. They also cover safety procedures for tasks like mooring, detergent handling, and enclosed space entry. Engineers and oilers are asked additional technical questions to assess their experience with tasks like machinery maintenance, repair, and emergency response procedures.

Uploaded by

Thiet Pham
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
191 views

Questions For 1e Interview

This document provides a list of topics and skills for crew candidates to review and train on in order to safely and effectively operate the chemical tanker. The topics cover cargo operations like pumping, sampling, and monitoring equipment. They also cover safety procedures for tasks like mooring, detergent handling, and enclosed space entry. Engineers and oilers are asked additional technical questions to assess their experience with tasks like machinery maintenance, repair, and emergency response procedures.

Uploaded by

Thiet Pham
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

I received some crew candidates' CV and found that their chem.

tanker experience were so weak

to give owners a good impression.

The attached files of cargoes are main for the ship

1)please read carefully and train crew cargo pumps of gear type, group system of cargo line

(needed to avoid idle running during cargo stripping!!!)


2)butterworthing machine operation

3)Steam hose handling and steaming operation with steaming equipment

4)cargo line draining and valve closing & pulg tapping the drain one by one

5)Safety clothes, goggles, helmets, safe working shoes,etc

6)detergent handling on deck

7)cargo sampling and keeping in cargo sample locker

8)drain plug on deck

9)PV valves checking

10)High, high-high level alarm

11)MMC(UTI tape) handling

12)Monitoring many kinds of gauges in CCR

13)Pumping record

14)Ship to Shore Safety Check

15)Making round ship during bething and cargo operation

16)mooring operation - one layer of mooring rope

17)Brake Holding Power on mooring winches

<For Engineers and oilers /wipers>

1. Who is “VIKOR MARINE CO.,LTD”?


2. English Ability
3. Attitude for interview
4. Education Period
5. Own-will disembarkation case?
6. Same type vessel career?
7. What is DP?
8. What is SSO?
9. What kinds of chemical cargo did you carry on last ships?
10. What is LEL or UEL?
11. What is an average percentage of oxygen in air?
12. What type of fire and it’s fire-fighting sources on board as A,B,C generally?
13. What is propeller pitch?
14. What is slip on engine propelling?
15. Mixing crew experience?
16. Knowledge about SOLAS
17. Knowledge about MARPOL
18. OIL MAJOR, CDI, PSC preparation & experience
19. Knowledge of VIQ of CDI & Oil major
20. What kinds of M/E, LO purifier’s maker do you have experience?
21. Framo cargo pump and Hydro power pack system and operation and
maintenance
22. 1E’s duties on board as senior officer on board?
23. Computer skills for Word, Excel & Power point program?
24. Emergency skills and knowledge for pollution on board or near ship
25. Knowledge Deck and Engine room equipment
26. PMS per many kinds of machinery of Engine dept. & Deck dept. in ship
27. Safety system of “Start lock” & “Operation”
28. What is your action when you see fire in E/room during your watch?
29. What is your action when seawater leaking in engine room?
30. Emergency start for M/E
31. About M/E piston overhauling
32. About Exchanging M/E exh. Valves
33. About Measuring for G/E crank shaft deflection
34. About Bunkering for fuel oil with ship’s sounding table
35. Danger of boiler-misfire?
36. High and low seachest?
37. Garbage disposal procedures?
38. About Report to C/E according with bunkering plan
39. How to use of method for oily water separator
40. About Cargo winch hyd. Motor overhauling for trouble shoot
41. Megger test for E/R electric motor ( R.S.T )
42. Experience of Cargo pump repairing
43. G/E engine piston half overhauling
44. M/E piston overhauling ( ring exchange)
45. Cutting, welding & exchange in E/R pipe
46. M/E exh. Valve spindle & seat ring lapping work
47. Have to use of method for hold bilge & ballast pump
48. Bunkering for fuel oil with ship’s sounding table
49. Gas cutting for newly steel plate
50. Ark welding for newly made steel plate
51. What kinds of safe check list before work-starting?
52. Your action to enter enclosed space like lantern space, cofferdam,etc?

You might also like