Scribd
Upload
54 views

Performing A Manual Update of Your Digital Road Map MOTION

After obtaining the latest digital map update on a USB stick or download link along with an activation code, follow the steps to connect the USB stick to the vehicle's system which will automatically start the map update process. The update involves entering the activation code and selecting start update, after which the map data will update while driving over the next 30-90 minutes before the system automatically reboots to complete the process.

Uploaded by

Anonymous FwvPH0T
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Performing A Manual Update of Your Digital Road Map MOTION

After obtaining the latest digital map update on a USB stick or download link along with an activation code, follow the steps to connect the USB stick to the vehicle's system which will automatically start the map update process. The update involves entering the activation code and selecting start update, after which the map data will update while driving over the next 30-90 minutes before the system automatically reboots to complete the process.

Uploaded by

Anonymous FwvPH0T
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PERFORMING A MANUAL UPDATE

of your digital road map MOTION

After you have identified the current map in your vehicle


You will then receive the latest map
on a USB stick DVD,or download link,together with the corresponding
activation code (FSC)*.
Below you will find step by step instructions on the update process.

Connect the 8GB USB stick to the system.


The screen display automatically changes to the navigation update mode.
Use the iDrive controller to select and activate the
Start update option in the display.

Enter the 20-character activation code using the iDrive


controller. The activation code does not contain the digits
“0” and “1” in order to prevent confusion with the letters “O”
and “I”.
Select OK to confirm your entry.
The update procedure will start.

The map data will now be updated as your journey continues.


Your navigation system’s basic functions continue to operate
normally during this procedure. Please leave the USB stick
inserted until the end of the update process.
The complete update procedure may last for between
30 and 90 minutes. Following successful installation
of the update, the system will automatically reboot.
This completes the update procedure.

http://bmwfsc.ca
[email protected]

You might also like