Scribd
Upload
699 views

Wheel Load Data R1

This document provides crane wheel load data, including: 1) Crane information such as type, span, load capacity, and speed. 2) Hoist information including type and hoisting speed. 3) Vertical wheel load values for maximum and minimum static and dynamic loads. 4) Horizontal wheel load values including inertia forces, maximum loads along the runway, buffer force, and forces from skewing.

Uploaded by

Jebin Jacob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
699 views

Wheel Load Data R1

This document provides crane wheel load data, including: 1) Crane information such as type, span, load capacity, and speed. 2) Hoist information including type and hoisting speed. 3) Vertical wheel load values for maximum and minimum static and dynamic loads. 4) Horizontal wheel load values including inertia forces, maximum loads along the runway, buffer force, and forces from skewing.

Uploaded by

Jebin Jacob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Calculation number: ......... R1 CXTS5TX9.

5M
Crane work number: .........
Creator/Version/Manuf: .... JMESVA / 2.90.9 / JME
Printed by......................... JMESVA
Printing date:.................... 19/04/2018
Printing time: ................... 12:43 Page: 1 (1)

CRANE WHEEL LOAD DATA


1 Wheel load drawing

2 Crane information
Crane type CXTS5t x 9.5m Hol:10.2m Buffer type D1801
Span (Spa) 9.500 m Wheel base (Wb) 2 000 mm
Load (SWL) 5 000 kg Crane rail in calculation 50*30
Crane group FEM A3 Wheel groove 62 mm
Crane speed 32/8 m/min
Crane weight 2 380 kg Crane travel limit switch 2-step

3 Hoist information
Hoist Hoist type Hoist group Hoisting speed
Hoist 1 Main CXT40410063P3 ISO M4 4/0.67 m/min
Hoist 1 Aux

4 Vertical wheel loads


Wheel NR1 NR2 NR3 NR4
Rmax Stc 30.1 kN 30.3 kN - -
Rmin Stc - - 5.6 kN 5.9 kN
Rmax Dyn 32.2 kN 32.4 kN - -
Rmin Dyn - - 6.1 kN 6.5 kN

5 Horizontal wheel loads (according to DIN 4132 + 15018 and FEM)


5.1 Inertia forces (from driving mechanisms) HM1 = 0.8 kN HM2 = 3.3 kN
5.2 Max. Wheel loads along each crane runway Kr = 0.4 kN
5.3 Buffer force for dimensioning the crane runway end stop Bf = 17 kN
5.4 Forces coming from skewing
5.4.1 Guiding (contact) force (S= HS2 + HS4) S = 10.5 kN
5.4.2 Friction forces due to oblique travel HS2 = 8.5 kN HS4 = 2.0 kN

Note! The inertia forces are acting on the crane structure only during acceleration and deceleration of the crane
movement. Inertia forces and guiding forces do not act simultaneously. Guiding force S can also locate in wheel
NR4.

You might also like