Scribd
Upload
96 views

Weee Symbol Vector Logo

The document describes a high frequency horn called the PH-2513. It has a rectangular mouth geometry with a 90 degree horizontal and 65 degree vertical radiation pattern, making it ideal for low distortion applications. It has a 1 inch throat compatible with various compression drivers. The horn is constructed of ABS with glass fillers for rigidity.

Uploaded by

Adina Preda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views

Weee Symbol Vector Logo

The document describes a high frequency horn called the PH-2513. It has a rectangular mouth geometry with a 90 degree horizontal and 65 degree vertical radiation pattern, making it ideal for low distortion applications. It has a 1 inch throat compatible with various compression drivers. The horn is constructed of ABS with glass fillers for rigidity.

Uploaded by

Adina Preda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

High Frequency Horn PH-2513

Applications
PH-2513 HIGH FREQUENCY HORN

The PH-2513 is a short throw horn design. The horn features a rectan-
gular mouth geometry with a 90 degree horizontal by 65 degree vertical
radiation pattern and is ideal for applications where low Q directional
acoustic radiation is specified. The 1 inch (25.4mm) throat design is
ideal for high sound pressure levels and low distortion through the mid
band frequency range. The 1 inch diameter screw on throat design makes
the PH-2513 compatible with many P Audio PreNeo and BMD series
professional compression drivers.

The PH-2513 offers a wide horizontal mouth and offers a wide dispersion
pattern to below 1000Hz. The width of the horn makes the PH-2513
ideal for use with 15 inch loudspeakers in professional level two way
system designs. The horn is compatible with many competitive com-
pression driver designs because of its industry standard throat diameter.
Specifications
The PH-2513 is constructed from high impact ABS with additional glass
Nominal Coverage Angle ( Hº X Vº) - 6 dB. 90º x 65º
Cut Off Frequency ( Hz.) 600 Hz
fillers for superior structural support and rigidity.
Throat Diameter 25.4mm (1")
Mounting Type SCREW ON The PH-2513 may be used with the following P.audio professional com-
Construction Injected Polymer pression drivers. ( or any industry standard compatible driver )
A.B.S with glass
fiber filled Black
Polycabonate
- BM-D340S
MOUNTING DIMENSIONS : - BM-D440S
Rear Height : 232mm (9.13") - BM-D450S
Rear Width : 120mm (4.72") - PreNeo-340S
OVERALL DIMENSIONS :
Mount Height : 256mm (10.17")
Mount Width : 132mm (5.19")
Length : 130mm (5.11")
BAFFLE CUTOUT DIMENSIONS :
Height : 225mm (8.85")
Width : 110mm (4.33")
Net Weight : 0.4kg (0.88 lbs)
Shipping Weight : 0.6kg (1.32 lbs)
Packing Dimension : 270mm x 140mm x 150mm
10.62" x 5.51" x 5.91"

Response of horn with BM-D440S


19/4 Moo 2 T.Bangkratuk A. Samparn Nakornpathom 73210 Thailand
Tel: +66-2-441-6600 Auto 30 Lines
e-mail: [email protected]
Web site: www.paudiothailand.com
All rights reserved by P.Audio System Co., Ltd. 2007

P Audio System Co., Ltd

You might also like