SHARP _ SERVICE MANUAL Code: 00 ZPC1245S/ ME move. PC-1245 CONTENTS =) 1. SPECIFICATION es 5 ea 2 DIFFERENCE BETWEEN THE PC-1245 AND TH POA 250R ea eteteteceeSees | 3. CPU PIN NO AND SIGNAL DESCRIPTION | 4, CIRCUITDIAGRAM | 3 5. PARTS & SIGNAL LAYOUT CHART 4 6. PARTS LIST 7. PARTS GUIDE This machine is a sister machine of the PC-1250 and the PC-1251 and is partly different from those models in appearance and specifications. SHARP CORPORATION1. SPECIFICATION Model: Pc-1245, Calculating Capacity 10 digits (mantissa) + 2 digits (exponent) Calculating System: —_Algebric system (with priority judgement function) Programming Language: BASIC cpu: 8 bit CMos System ROM: 24K bytes Memory Capacity: System Ares Area dedicatod to data Program/date area ‘Stack: Sub-routine: For-NEXT: Function: Dawa: Operators: Basic caleulation: Function calculations: About 0.8K bytes 208 bytes 1486 bytes 10 stacks B stacks 16 stacks stacks Addition, substraction, multiplication, division Trigonometric and inverse trigonometric functions, logatith- ‘mic and exponential functions, angle conversion, square root, interger, absolute, sign operators, Editing Features Cursor left and right (> , <1, character insert {INS), character delete (DEL), ine up and down (4, ) Memory Protection: Battery backup (the contents of programme and its data are retained at power-off.) Display: 16-character liquid crystal display with 5 x 7 dot characters, Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F) Power Supply. 6V DC Lithium cells ‘Type: CR-2032 Operating Time: Approx. 300 hours (Display: 95555555, ambient temperature: 20°C (68°F). The Power Consumption: 0.03 W Dimensions: 135 (W) x 70 (0) x 9.5 ‘operating time slightly varies depending upon the use of battery.) (H) mm 5.5/16" (W) x 2.3/4" (D)x 3/8” (H) Weight: 115g (0.25 tbs) (with cells) 2. DIFFERENCE BETWEEN THE PC-1245 AND THE PC-1250 Pe-1245 6.1250, Display capacity 16 choractrs(LF81786) 24 characters Keyboard | Reserve function Not provided | Provided entry —_| One-touch command entry Provided (18 kinds) | Assignable with the reseve function | Detinable function Provided (18 kinds) Provided (18 kinds) RAM | Memory dedicated to data 26 memories | 26 memories capscty _| Flexible memory 5] the bes 1438 bytes tsi cru Same as PC:1250 Sc-61860a02 Display driver Same as PC-1250 sc-43596 RAM (2K bytes) Same as PC-1250 HM.6116 | ROM (16K bytes) | LH-532920 LH-532917 (Version ROM to meet the change in specification) Pwa Main PWB only Main PWB + RAM PW3. CPU PIN NO AND SIGNAL DESCRIPTION Fa] Signer 1 [Aer | OUT | Aaa gy — [Raw | OUT | Write clock, normaly high = SI Gat | OUT | Sertpal ont ates as Sli acy RON | [1 | IN| Oscitator input 00 | OUT | Oscillator output Se | RES | IN | Reset input, active high. Normally, pulled down to low level IN [ON (BREAK ke pt, oral lad down cow. 10 OUT | Output (MT out 1) of mierocassette signal to the CE-T25 option andthe buzzer. un OUT | LCD driver control signal. Steen | 14_|iA7_ [IN/OUT | Key input/strobe signal, low during standby and Key'n pulse i generated when iow 15 | iA6 | W/OUT| Key inputlsvobe signal low during standby and Key n pulse gneated when ow 16 | iaS |im/oUT| Key input/strobe signal, low during standby and key-in pulse is generated when low. v IWOUT] Ke puto nl lw Sarin rd yn ul ewe wesw ie IN/OUT | Key inputstrobe signal, low during standby and key-in pulse is genereted when low. 19 INIOUT | Key input/strobe signal low durin standby and key in pulse is generated when low. 2 INVGUT Key puro nl lw din tardy rd Kym pul seme wher 21 | ee | iN _| ACK salt nai the GPU ob ata ounh VO pr (PU) 23 | tae | OUT | SEL2 output, PAype open drain. 36 | 15 | OUT | SELT out, Pave open din = ieee 28 [Restate ut ow dung snd nda ulead when ow. | | 27 ey strobe 04 28_| i81_| OUT _ Key strobe output, low during stndby and key in pul is generated when fw =) vm LCD power sai 30 VA | LeD power supply Me a a 31 | GNO | IN ‘our a) HT 3 ney ‘ouT [a [a3 | [our 3s | Ha | our 36 | HS | ouT ‘our ‘out H8 | ouT | Power supply. LCD backplate signa, high impedance during standby and level puke during dislay [LCD backolate signal, high impedonce during standby ond leet ‘igh impedence during standby and ‘evel pul during dspay LCD backplate | ECO_twceoite high impedance during standby and A-evel pulse during display LCD backplate Ihgh impedance during uring alspay. LCD backel high impedance during standby and level pulke during ditplay [LCD backplate signal, high impedence duting standby end ‘evel pulte during display LCD backolate signal, igh impedence during standby and ‘evel pulse during display.