Scribd
Upload
125 views

PEC Design Rules

This multitester has 35 measurement ranges for testing low-voltage circuits found in communications equipment, appliances, and batteries. It can measure DC and AC voltage, DC and AC current, resistance, dB, and has features like continuity checking and battery testing. Key specifications include measurement ranges from 100mV to 1000V for voltage and 50μA to 250A for current, with ±2.5-5% accuracy for most functions. It is powered by batteries and has a backlit LCD display in a compact portable design.

Uploaded by

Jonathan Rea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views

PEC Design Rules

This multitester has 35 measurement ranges for testing low-voltage circuits found in communications equipment, appliances, and batteries. It can measure DC and AC voltage, DC and AC current, resistance, dB, and has features like continuity checking and battery testing. Key specifications include measurement ranges from 100mV to 1000V for voltage and 50μA to 250A for current, with ±2.5-5% accuracy for most functions. It is powered by batteries and has a backlit LCD display in a compact portable design.

Uploaded by

Jonathan Rea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ANALOG MULTITESTER

YX-361TR

APPLICATIONS AND FEATURES


This instrument is a portable multitester designated for the
measurement of low-voltage circuit.
This is used at small communications equipments, home
electric appliances, voltage of lump line,
and measurement of various types of batteries.
●Total 35 wide ranges(24ch sw + additional functions)
●±DCV zero center meter
●LED for continuity check
●OUTPUT terminal(series capacitor terminal)
●Battery check

SPECIFICATIONS
Measuring range Accuracy
DCV 0.1V/0.5/2.5/10/50/250/1000V(20kΩ/V) ±2.5% of full scale
(NULL) ±5/25V(40kΩ/V) ±5% of full scale
ACV 2.5/10/50/250/1000V(9kΩ/V) ±3% of full scale (10V : ±4%)
DCA 50μ/2.5m/25m/0.25A ±2.5% of full scale
Resistance 2k/20k/200k/2M/20MΩ ±3% of arc
dB -10dB∼+62dB ±3% of full scale (10V : ±4%)
Continuity LED : emitting light at 10Ω or less. Open voltage : 3V
Battery check 1.5V
hFE 1000 at x10 range(optional probe "HFE-6T" is necessary)

Meter type Taut-band meter


Accuracy assurance temperature / 23±2℃ 75%RH max.
humidity No condensation
Operating temperature / 5∼31℃, 80%RH(Max).
humidity 31<∼40℃, 80∼50%RH(decreasing linearly)
Storage temperature / -10 to 50℃, 70% RH or less,
humidity No Condensation
Bandwidth 40Hz∼20kHz(less than 50V : ±3%) A battery for monitoring has been installed prior to shipment from the
Battery R6P x 2, 6F22 x 1 factory. It may be discharged before the expiration of the described battery
Fuse Φ5.2 x 20mm(250V / 0.5A) life. This battery is used to check the functions and performance of the
Size / Mass H150 x W100 x D37mm / approx.290g product.Specifications and external appearance of the product described
Standard accessories included Test lead(TL-61), Instruction manual above may be revised for modification without prior notice.

Distributed by

Dempa Bldg, 4-4 Sotokanda 2-Chome, Chiyoda-Ku, Tokyo 101-0021 Japan


Tel:+81-3-3251-0941 Fax:+81-3-3256-9740

www.sanwa-meter.co.jp

You might also like