Scribd
Upload
266 views

BYK Additives

Additives

Uploaded by

Adriano Araujo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
266 views

BYK Additives

Additives

Uploaded by

Adriano Araujo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DISPERBYK-140

Data Sheet
Issue 02/2013

DISPERBYK-140
Wetting and dispersing additive for solvent-borne coatings and pigment concentrates.
Particularly suitable for stabilizing pigments in CN and TPA systems.

Product Data

Composition
Solution of an alkyl ammonium salt of an acidic polymer

Typical Properties
The values indicated in this data sheet describe typical properties and do not constitute specification limits.

Amine value: 76 mg KOH/g


Acid value: 73 mg KOH/g
Density (20 °C): 1.02 g/ml
Non-volatile matter (20 min., 150 °C): 52 %
Solvents: Methoxypropylacetate
Flash point: 44 °C

Food Contact Legal Status


For the current food contact legal status, please contact our product safety department or visit www.byk.com
for further information.

Storage and Transport


DISPERBYK-140 may adversely affect the coating adhesion to steel substrates in baking enamel systems.
Before using in white baking enamel systems, check whether DISPERBYK-140 causes yellowing. In this case
DISPERBYK-180 is recommended to stabilize titanium dioxide.

Applications

Coatings Industry

Special Features and Benefits


The additive deflocculates pigments by steric stabilization. As a result of the small particle sizes of the
deflocculated pigments, high levels of gloss can be achieved and the color strength is improved. In addition,
the additive increases transparency with transparent pigments and hiding power with opaque pigments.
Viscosity is reduced. In this way, the leveling properties are also improved and higher pigment loading is possible.

Recommended Use
DISPERBYK-140 is highly compatible with all standard coating binders. The use of DISPERBYK-140 to excellent
effect in cellulose nitrate (CN) and thermoplastic acrylate resins (TPA) is a particular benefit.
DISPERBYK-140

Data Sheet
Issue 02/2013

Recommended Levels
Amount of additive (as supplied) based upon pigment:

Inorganic pigments: 15-20 %


Titanium dioxides: 3-4 %
Organic pigments: 30-80 %
Carbon blacks: 40-80 %

The above recommended levels can be used for orientation. Optimal levels are determined
through a series of laboratory tests.

Incorporation and Processing Instructions


For optimum performance, the additive must be incorporated into the mill base before
the addition of pigments.

BYK-Chemie GmbH ANTI-TERRA®, BYK®, BYK®-DYNWET®, BYK®-SILCLEAN®, BYKANOL®, BYKETOL®, BYKJET®, BYKOPLAST®, BYKUMEN®, CARBOBYK®, DISPERBYK®,
P.O. Box 10 02 45 DISPERPLAST®, LACTIMON®, NANOBYK®, PAPERBYK®, SILBYK®, VISCOBYK®, and Greenability® are registered trademarks of BYK-Chemie.
46462 Wesel AQUACER®, AQUAMAT®, AQUATIX®, CERACOL®, CERAFAK®, CERAFLOUR®, CERAMAT®, CERATIX®, HORDAMER®, and MINERPOL® are registered
Germany trademarks of BYK-Cera.
Tel +49 281 670-0 SCONA® is a registered trademark of BYK Kometra.
Fax +49 281 65735 This information is given to the best of our knowledge. Because of the multitude of formulations, production, and application conditions, all the
above-mentioned statements have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived
[email protected] from this fact for individual cases.
www.byk.com/additives This issue replaces all previous versions – Printed in Germany

You might also like