SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers

This procedure gives a basic overview of the MPH / KPH function, the 3 methods used
on SportsArt equipment for changing the measurement units between MPH / KPH, and
Detailed Problem Description step-by-step instructions on how to change the measurement units on each type and
model of equipment.

1) MPH / KPH function overview

Procedure Overview
2) Step-by-step Instruction Tables

A common issue with all equipment is that the speed seems slow. For example, at
speed 5 the unit feels to operate at speed 3. Usually there’s nothing wrong with the
equipment; a user has accidentally switched the speed/distance unit mode from MPH
1) MPH / KPH Overview to KPH.
Speed/distance units are changed in one of three ways: (1) by pressing a sequence of
keys on the unit; (2) by moving a jumper on the display PC board; (3) by the software,
which is put in place when the unit is shipped from the factory.
2) Step-by-Step Instruction
Tables
A) Treadmills : See Table #1 (page 2 – 3)
B) Cycles : See Table #2 (page 4 – 6)
A) Treadmills C) Ellipticals : See Table #3 (page 7 – 8)
B) Cycles D) X – Trainers : See Table #4 (page 9)
C) Ellipticals and Rowers
D) Cross Trainers and E) Steppers : See Table #5 (page 10)
Rowers
E) Steppers

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 1 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions A) Treadmills

Table #1

Model Number Instructions

1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
3007
3. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT appears. Press + or – to select your weight. Press ENTER key to confirm
your choice.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
3100 (HR)
3. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your choice.
1. Turn on unit power. Put safety key in place. “SELECT MODE USER1-USER4” appears. Do not
press SPEED  or  key. Press MODE  or  key to select a USER number, then
press ENTER key.
3108
2. “SELECT MODE   MPH/KPH” appears. “MPH” or “KPH” appears. Press MODE  or  key
3110
to select MPH or KPH. Press ENTER key to confirm your choice.
3. ”ENTER WEIGHT” appears. A weight appears. Press  or  key to select your weight.
Press ENTER key to confirm your choice. Follow prompts for IRC control.
1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
confirm your choice.
3150
3. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your choice.
4. “ENTER WEIGHT” appears. A weight appears in 4 seconds. Press  or  key to select your
weight. Press ENTER key to confirm your choice.
1. Press MANUAL/SET key until “SET” appears. Press ENTER key.
2. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
3250 confirm your choice.
6003 3. “MALE/FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER key to
6005 confirm your choice.
4. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your choice.

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 2 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions A) Treadmills (continued)

Table #1 (continued)

6150 1. Press “MANUAL/SET” key until “SET” appears. Press ENTER key.
6150E 2. “MPH” or “KPH” appears. Press  or  key to select MPH or KPH. Press ENTER key to
confirm your selection.
3. “MALE” or “FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER
key to confirm your selection.
4. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your selection.
1096,1098,1190, The MPH/KPH adjustment is made by switching a jumper connection on the rear of the display
1200, 1200N, board.
6200
1210,1250,1260, Determined by the IC chip. All IC chips in this market use American standard units, MPH.
3106,3120,3200,
6100,6100E,6300,
TR63
6310 1. Turn on unit. “SPORTSART” scrolls. “6310/6320” appears. Hold the CHANGE key for three
6320 seconds.
2. “PRESS  TO SELECT MPH/KPH, PRESS ENTER” scrolls. “MPH” or “KPH” appears. Press
 or  key to select KPH or MPH. Press ENTER to confirm your choice.
3. “PRESS  TO SELECT MODIFY HRC TARGET HR (Y/N)?, PRESS ENTER” scrolls. “NO” or
“YES” appears. Press  or  key to select your target heart rate. Press ENTER key to confirm
your selection.
TR20/TR20F 1. Remove SAFETY KEY press DISPLAY CHANGE key for 3 seconds, program versions for
display and drive boards are shown, press ENTER to show MPH or KPH
2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
Follow prompts to show distance or press STOP to end and return to SAFETY KEY display.
PF-T2.00F 1. Turn on the unit. While the startup banner appears, hold the CHANGE key for three seconds.
TR21/TR21F 2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
TR31,TR32,TR33
T610/T611 1. Turn unit on. While the startup banner appears, hold the “DISPLAY CHANGE” key for three
T620/T621 seconds. “UNIT-MPH” or “UNIT-KPH” appears.
2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
Follow prompts to see time and software versions.
T630/T631 1. Turn unit on. While the startup banner appears, hold the “DISPLAY CHANGE” key for three
T650/T650M seconds. “UNIT-MPH” or “UNIT-KPH” appears.
T652/T652M 2. Press incline  or  keys to select unit preference, then press ENTER to confirm your choice.
T672 Follow prompts to see time and software versions.
T670/T670E 1. Turn unit on. While the startup banner appears, hold the ENTER key for three seconds. “UNIT-
T680/T680E MPH” or “UNIT-KPH” appears.
2. Press  or  keys (display left, under ENTER key only, not lower keypad incline and speed
keys) to select unit preference, then press ENTER to confirm your choice. Follow prompts to
see Distance, Time, TFT IC (680 only), CTL IC and DRV IC.

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 3 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions B) Cycles

Table #2

Model Instructions
5002 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
5005 Press ENTER key.
2. “PRESS  TO SELECT MILE/KILO” appears. Press  or  key to select MILE or KILO.
Press ENTER key to confirm your selection.
3. “MALE” or “FEMALE” appears. Press  or  key to select MALE or FEMALE. Press ENTER
key to confirm your choice.
4. “PRESS  TO INPUT WEIGHT” appears. Press  or  key to select your weight.
Press ENTER key to confirm your choice.
5002B(H) 1. Press  key to select “SET”. Press ENTER/MODE key to confirm your choice.
5005B(H) 2. “PRESS  TO SELECT MILE OR KILO” appears. Press  or  key to select MILE or KILO.
Press ENTER/MODE to confirm your choice.
3. “ENTER WEIGHT” scrolls across the screen. A weight appears. Press  or  key to select
your weight. Press ENTER/MODE key to confirm your choice.
5007R 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
5009U Press ENTER key.
5100U 2. “PRESS  KEY TO SELECT MILE/KILO” appears. Press  or  key to select MILE or
5150R KILO. Press ENTER key to confirm your selection.
5200U 3. You are prompted to select male or female. Press  or  key to select the male or female
symbol. Press ENTER key to confirm your choice.
4. “ENTER WEIGHT” scrolls across the screen. A weight appears. Press  or  key to select
your weight. Press ENTER key to confirm your choice.
C5150R 1. Start exercising on unit. Display shows model number. Simultaneously press and hold LEVEL
C5200U and LEVEL keys three seconds. HR window shows “NO” or “YES”. “PRESS TO SELECT
MODIFY HRC TARGET HR, PRESS ENTER“ scrolls. “MDFY” appears. Press LEVEL 
or LEVEL key to select your choice. Press ENTER to confirm your choice.
2. “PRESS TO SELECT LB/KG” scrolls. “LB” or “KG” appears. Press LEVEL  or LEVEL key
to select your choice. Press ENTER to confirm your choice.
C50R/U 1. While startup screen is visible, hold the ENTER key for three seconds. MPH or KPH appears.
Press up/down keys to toggle. Press ENTER to confirm your choice.
506,508,C51R/U, 1. The MPH/KPH adjustment is made by switching a jumper connection on the rear of the display
C52R/U,C53R/U board. (C52: See Illustration #1, page 5. C53: See Illustration #2, page 6)
C520R/U 1. Pedal to start. While startup screen is visible, hold the CHANGE key for three seconds. UNIT –
C521R/U,C521M LB or UNIT – KG appears. Press  keys to toggle. Press the ENTER key to confirm your
UB521M choice.
C531R/U
C532R/U
C570R/U 1. Pedal and don’t press other keys. Hold the ENTER key three seconds. KPH or MPH appears.
C572R/U,G572R/U 2. Press  keys to toggle to KPH or MPH setting.
C580R/U 3. Press ENTER key to confirm your choice. Press ENTER key to see Distance, Time, and CTL
IC.

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 4 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions B) Cycles
C52 Jumper Settings
1. KPH: With JP1 inserted, distances will be measured as KPH.
2. MPH: With JP1 not inserted, distances will be measured as MPH.

Illustration #1

KPH

MPH

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 5 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions B) Cycles
C53 Jumper Setting
1. KPH: With JP1 inserted, distances will be measured as KPH.
2. MPH: With JP1 not inserted, distances will be measured as MPH.

Illustration #2

KPH

MPH

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 6 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions C) Ellipticals

Table #3

Model Instruction
803P 1. Do not exercise on unit. (Unit must not be moving.)
2. In manual mode, hold the ENTER key for three seconds. Either “KG“ or “LB” appears on the
display.
3. Hold ENTER key down again for three seconds to change weight units.
805P 1. In manual mode, hold the MODE key for three seconds. “SET“ appears on the display.
807P Press ENTER key.
2. “KG” or “LB” appears. Press MODE  or  key to select KG or LB. Press ENTER to confirm
your selection.
3. A weight appears. Press MODE  or  key to select your weight. Press ENTER to confirm your
selection.
8003 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS  TO SELECT KG/LB” appears. Press  or  key to select KG or LB.
Press ENTER key to confirm your choice.
3. “PRESS  TO INPUT WEIGHT” appears. Press  or  key to select your weight.
Press ENTER key to confirm your choice.
8007 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
8100 Press the ENTER key.
2. “PRESS + -- TO SELECT KG/LB” appears. Press + or -- key to select KG or LB. Press ENTER
key to confirm your choice.
3. “PRESS + -- TO SELECT INPUT WEIGHT” appears. Press + or -- key to select your weight.
Press ENTER key to confirm your choice.
8300 1. In manual mode, simultaneously press MODE  and MODE  keys for three seconds. KG or
LB will appear. Press MODE  or  to choose between LB and KG. Press ENTER key to
confirm your choice.
E8300 1. Start exercising on unit. Display shows model number. Simultaneously press and
hold LEVEL and LEVEL keys three seconds. HR window shows “no” or “YES”. “PRESS
TO SELECT MODIFY HRC TARGET HR, PRESS ENTER“ scrolls. “MDFY” appears.
Press LEVEL  or LEVEL key to select your choice. Press ENTER to confirm your choice.
2. “PRESS TO SELECT LB/KG” scrolls. “LB” or “KG” appears. Press LEVEL  or LEVEL key to
select your choice. Press ENTER to confirm your choice.
E80 1. Turn on unit. Press the START key to enter user mode. Select a user.
E81 2. Simultaneously hold WORKOUT LEVEL  + WORKOUT LEVEL  for three seconds. Total
distance appears. Follow prompts to see time, then see the LB or KG setting. Press  or 
keys to toggle to your choice. Press ENTER to confirm your LB or KG setting.
E83 1. Turn on unit. Simultaneously press and hold LEVEL  + LEVEL  + ENTER keys for three
seconds.

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 7 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions C) Ellipticals (continued)

Table #3 (continued)

E82, E820 1. The E82/E820 MPH / KPH adjustment is made by changing two dip-switch settings on the rear
of the display board. (See Illustration #3, below)
E821 (E85) 1. Turn on unit. While the startup banner appears, hold the CHANGE key for three seconds.
E822,E825 (E86) 2. Units of measurement appear. Press  or  keys to toggle to your choice. Press ENTER to
E830 (E87),E850 confirm your LB or KG setting. Follow prompts to see Time, Distance, and the display IC
version.
E862,G862 1. Turn on unit. While the startup banner appears, hold the ENTER key for three seconds.
E870 2. Units of measurement appear. Press  or  keys to toggle to your choice. Press ENTER to
E872,G872 confirm your LB or KG setting. Follow prompts to see Time, Distance, and the display IC and
E880 drive board version.

E82 KPH/MPH Toggle Switch

1. KPH: Set the dip switches (SW-DIP2) toward 1 & 2 markings to get KPH.
2. MPH: Set the dip switches (SW-DIP2) toward the ON marking to get MPH.

Illustration #3

KPH

MPH

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 8 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions D) X-Trainers and Rowers

Table #4

X-Trainers Instructions
XT10 1. Start exercising and don’t press any other keys. At start up screen, simultaneously
XT20 press LEG Work Level  keys.
2. Dot matrix display shows MDFY. Heart rate window shows YES or NO. Press  keys to
toggle. Choose YES. Press ENTER to confirm your choice.
3. KG or LB appears in the dot matrix screen. Press  keys to toggle. Press the ENTER key to
confirm your choice.

XT50 1. When the startup screen appears, press the START key. The USER indicator flashes.
2. Simultaneously press WORKOUT LEVEL ▼ and WORKOUT LEVEL▲ keys for three seconds.
Time and distance windows show total distance as eight digits. Units appear as MILE or KM.
Press the ENTER key to proceed.
3. Time and distance windows show total time as four digits. "HOUR" appears in the workout
profile window. Press the ENTER key to proceed.
4. Press WORKOUT LEVEL? or WORKOUT LEVEL▲ to toggle between "LB" and "KG”. Press the
ENTER key to return to the start up screen.
In this setting, press the STOP/HOLD TO RESET key at any time to return to the start up
screen.

Rowers
2100 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press ENTER key.
2. “SELECT METER OR FEET” appears. Press + or -- key to select METER or FEET.
Press ENTER key to confirm your choice.

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 9 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]
 SportsArt Tech Tip

Issue Summary Speed readouts are incorrect; MPH / KPH setting has been changed
All equipment with speed readout: Treadmills, Cycles, Ellipticals, Cross Trainers,
Applies To
Rowers and Steppers
2) Step-by-Step Instructions E) Steppers

Table #5

Steppers Instructions
7005 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS + --   TO SELECT METER/FEET” appears. Press +, --,  or  key to select
METER or FEET. Press ENTER key to confirm your choice.
3. “ENTER WEIGHT” appears. A weight appears. Press + or -- key to select your weight.
Press ENTER key to confirm your choice.
7100 1. Press MANUAL/SET key. “MAN’L” appears. Press MANUAL/SET key again. “SET” appears.
Press the ENTER key.
2. “PRESS   TO SELECT MILE/KILO” appears. Press  or  key to select MILE or KILO.
Press ENTER key to confirm your choice.
3. “ENTER WEIGHT” appears. Press  or  key to select your weight. Press ENTER key to
confirm your choice.
S7100 1. Start exercising on unit. Display shows model number. Simultaneously press and
hold LEVEL and LEVEL keys three seconds. HR window shows “no” or “YES”. “PRESS
TO SELECT MODIFY HRC TARGET HR, PRESS ENTER“ scrolls. “MDFY” appears.
Press LEVEL  or LEVEL key to select your choice. Press ENTER to confirm your choice.
2. “PRESS TO SELECT LB/KG” scrolls. “LB” or “KG” appears. Press LEVEL  or LEVEL key to
select your choice. Press ENTER to confirm your choice.

S770 1. To check the system default setting, at the start up screen (select PROGRAM or QUICK
S772 START). Hold the ENTER key for 3 seconds:
2. Unit of Speed (MPH or KPH): Press ▲/▼ keys to change the speed unit setting. Press ENTER
to confirm your choice and to see the next setting. You may also press STOP to leave this
setting.

Mph-Kph Detailed Instructions Printed: 12/19/2012 Page 10 of 10

www.sportsartamerica.com Contact us: 866-709-1750 or [email protected]