5/3/2015 Synthesis Basics

A Young Person's Guide to the Principles of

Music Synthesis
by Beau Sievers

Table of Contents
1. Table of Contents
2. Introduction
3. Sound Waves and Oscillators
1. Frequency and Pitch
2. Basic Waveforms
1. Sine
2. Sawtooth
3. Square
4. Triangle
4. Building a Synthesizer
1. Volume Control
2. Filters
1. Low Pass and High Pass Filters
2. Band Pass and Band Reject Filters
3. Properties of Filters
3. Control Signals
1. Envelope Generators
2. Low Frequency Oscillators (LFOs)
5. Conclusion and Further Reading

Introduction
This article is a (relatively) brief introduction to the principles of music synthesis. Each of the basic
components of synthesizers are explained, along with descriptions and examples of how these
components are chained together to make interesting sounds. The principles discussed are not unique to
any specific synthesis platform, but are applicable to music synthesis in general.

I hope this article will help interested musicians and composers access the academic tools and literature
associated with electronic music. Most electronic music literature assumes a linguistic and conceptual
vocabulary which is opaque and inaccessible to the beginner. There's no good reason for this. This
article is intended as a good place to start learning; a place to acquire vocabulary without technical
training.

The text of this article is accompanied by illustrations, audio examples, and links to working
demonstrations in PureData. PureData is a powerful, free, cross-platform, open source music synthesis
tool. It's a good idea to read this article with PureData open in the background, building and learning as
you go.

You can download PureData by clicking here. It's available for Linux, Mac OS X, and Windows. The
examples provided with this article were created with and tested on PureData 0.40.1 for Mac OS X.

All of the PureData examples are collected in this zip file.

http://beausievers.com/synth/synthbasics/ 1/15
5/3/2015 Synthesis Basics

Sound waves and oscillators

Sounds are pressure waves which travel through air, or another medium, to our ears. Unlike waves in
the ocean, which move up and down, pressure waves move forward and back. These waves move our
ear drums in and out, and we experience this as sound. Sound synthesis is the art of creating signals
that, when turned into sound waves by a speaker, people find interesting. During the course of this
article we'll explore a number of devices that create and modify signals used to synthesize sound.

The first such device we'll consider is called an oscillator. An oscillator generates a consistent,
repeating signal. Signals from oscillators and other sources are used to control the movement of the
cones in our speakers, which make real sound waves which travel to our ears. If you tie one end of a
rope to a doorknob, stand back a few feet, and wiggle the other end of the rope up and down really fast,
you're doing roughly the same thing as an oscillator. The difference is that you're wiggling a rope,
whereas the oscillator is wiggling an audio signal.

Audio signals are often represented on a graph where the horizontal x-axis represents time and the
vertical y-axis represents the pressure of the signal. This is called a time domain representation of
audio. Time domain graphs are kind of like instructions for speakers about how to move in and out.
When the graph reads 1, the speaker cone is pushed all the way out, when it reads -1, the cone is pulled
all the way in. This movement creates a pressure wave in the air which we hear as sound. If a speaker
cone moves in and out according to the graph above, it will make the sound of a bass drum.

Frequency and pitch

The rate at which a sound wave moves in and out is called the frequency. Frequency is measured in
cycles per second. The length of a singal cycle of a waveform is the span of time it takes for that
waveform to repeat. People generally hear an increase in the frequency of a sound wave as an increase
in pitch. When the frequency of an oscillator is doubled, the pitch of the sound it generates moves an
octave up. For example, an oscillator generating a signal that repeats at the rate of 440 cycles per
second will have the same pitch as middle A on a piano. An oscillator generating a signal that repeats
at 880 cycles per second will have the same pitch as the A an octave above middle A. A common way
of saying "cycles per second" is "Hertz," abbreviated "Hz."

Basic waveforms

There are four different types of basic wave shapes, or waveforms, illustrated here.

Technical note: Topics in music synthesis sometimes call for a little bit of math. If you're not a math
person, that's okay, you can skip over the stuff that doesn't make sense. To make it easier for you, the
parts you can skip will be safely contained in these sturdy boxes.

Sine

Audio example of sine waves.

http://beausievers.com/synth/synthbasics/ 2/15
5/3/2015 Synthesis Basics

Sine waves look similar to a gentle wave in a bowl of water, moving up and down with no abrupt starts
or stops. Common sounds similar to a sine wave include whistling, air blowing across the opening of
an empty bottle, and a ringing tuning fork.

Technical note: The sine wave is the most basic, pure waveform, with a contour described by a
trigonometric function called the sine function. Any other waveform, including the other simple
waveforms described below, can be created by adding up a series of sine waves. Details on this process
exceed the scope of this article. For more information, check out the Wikipedia entries on Fourier
Analysis and Additive Synthesis.

In the above picture, the first two sine waves are added together to produce a third, different wave.

http://beausievers.com/synth/synthbasics/ 3/15
5/3/2015 Synthesis Basics

In the above picture, a sine wave is added to its opposite. The result is silence.

The above chart represents an audio signal based on its frequency. This is called a frequency domain
graph. Some stereo systems have an LCD screen where lines rise and fall based on the pitch content of
the sounds being played. That LED screen is a frequency domain representation of the audio. As shown
in the chart above, a sine wave would only push up one of these lines. This is because sine waves, the
simplest waves, have only one frequency. More complicated waves can have energy at more than one
frequency, and a graph is a good way to keep track of what's going on. We'll look at frequency domain
graphs of more complicated waves very soon.

Sawtooth

http://beausievers.com/synth/synthbasics/ 4/15
5/3/2015 Synthesis Basics

Audio example of sawtooth waves.

Sawtooth waves, also called saw waves, have a very strong, clear, buzzing sound. A sawtooth wave
can be made by adding a series of sine waves at different frequencies and volume levels. The frequency
of the first, loudest sine wave is what we hear as the frequency of the resulting sawtooth. This is called
the fundamental frequency. Each of the other, progressively quieter, sine waves that make up a
sawtooth have frequencies which are integer multiples of the fundamental frequency. These
frequencies are called harmonics.

For example, an ideal sawtooth wave with a fundamental frequency of 100Hz would have harmonics at
200Hz, 300Hz, 400Hz, and so on to infinity, with each harmonic quieter than the last. Because the
sawtooth wave contains every integer harmonic of the fundamental frequency, it sounds very rich to
our ear. The fundamental frequency defines the pitch of the sound, while the harmonics change the
character, or timbre, of the sound without affecting the pitch.

Technical note: The amplitude of a given harmonic in a sawtooth wave is equal to the inverse of its
harmonic number. For example, a sawtooth wave with a fundamental frequency of 100Hz and an
amplitude of 1 would have a harmonic at 200Hz (100*2) with an amplitude of 0.5 (1/2), another
harmonic at 300Hz (100*3) with an amplitude of 0.33 (1/3), and so forth. The more harmonics are
added in this manner, the more the wave will look like the idealized sawtooth wave depicted in this
article.

Square

Audio example of square waves.

http://beausievers.com/synth/synthbasics/ 5/15
5/3/2015 Synthesis Basics

Square waves have a rich sound that's not quite as buzzy as a sawtooth wave, but not as pure as a sine.
Old Nintendo game soundtracks were made almost exclusively from square waves. Like sawtooth
waves, square waves can be generated by adding a series of sine waves with decreasing volume.
However, the square wave contains only the odd numbered harmonics.

The amplitude of a given harmonic in a square wave is equal to the inverse of its harmonic number. For
instance, a square wave with a fundamental frequency of 100Hz would have a harmonic at 300Hz
(100*3) with an amplitude of 0.33 (1/3).

Triangle

Audio example of triangle waves.

Triangle waves sound like something between a sine wave and a square wave. Like square waves, they
contain only the odd harmonics of the fundamental frequency. They differ from square waves because
the volume of each added harmonic drops more quickly.

Technical note: The amplitude of a given harmonic in a triangle wave is equal to the inverse square of
http://beausievers.com/synth/synthbasics/ 6/15
5/3/2015 Synthesis Basics

its harmonic number. For example, a triangle wave with a fundamental frequency of 100Hz and an
amplitude of 1 would have a harmonic at 300Hz (100*3) with an amplitude of 0.1111 (1/3^2).

Building a Synthesizer
Now that we understand oscillators, let's draw a diagram of a very simple synthesizer. This synthesizer
will contain a single sawtooth oscillator which sends signal to our audio output, and then to our
speakers. The pitch of the oscillator will be controlled by a keyboard.

Here's a sample of what the synthesizer described in this diagram might sound like.

Here's a realization of this patch in PureData.

Individual synthesizer components which perform a single, simple function—such as oscillators and
filters—are called modules. A modular synthesizer is a synthesizer made by linking together lots of
small modules in interesting ways. In the diagrams we use, the lines connecting the modules are like
virtual cables, sending signal between them in much the same way an audio cable would in real life.

Volume control
http://beausievers.com/synth/synthbasics/ 7/15
5/3/2015 Synthesis Basics

There are some problems with our synthesizer design—not the least of which is that because we have
no way of controlling the volume of the oscillator, our instrument is always making sound! In order to
fix this problem, we need to add a module called a Voltage Controlled Amplifier, or VCA. The
function of a VCA is to raise or lower the volume, often called amplitude or level, of a signal.
Essentially, a VCA is a volume knob. Oscillators and other sound generating modules are always
making sound, and VCAs are what keep the level down when you're not playing.

In analog synthesizers, VCAs are actually controlled by wires carrying electrical current. There are no
real wires carrying voltage inside a virtual synthesizer, but people often call virtual amplitude controls
VCAs anyway. With many synthesizers, most of the VCAs are beneath the hood and we don't need to
worry too hard about where they are or how they're controlled, but it's important to know how they
work.

Let's add a VCA to our simple synthesizer now. This means adding a new module and a couple more
cables, but don't worry, they're explained right after the diagram.

Here's a sample of what the synthesizer described in this diagram might sound like. Note that we can
now insert pauses and play notes at different volumes.

Here's a realization of this patch in PureData.

The "gate" cable running from the keyboard to the VCA is a signal that sends one of two messages to
the VCA: "on" if a key is depressed, and "off" otherwise. When the gate signal is off, or closed, we
hear nothing. When the gate signal is on, or open, then the VCA will let the noise from the oscillator to
the audio output. The "velocity" cable sends a level to the VCA that corresponds with how fast we hit
the key, and controls the volume level of the output. If we press a key very hard, and thus very fast, the
volume of the output will be louder than if we pressed the key soft and slow.

Filters
Filters are, generally speaking, tools for manipulating signals. Any device which modifies a signal in
any way is, technically, a filter. When people talk about filters, however, they usually are referring to
filters which modify the harmonic content of the signal, altering the characteristics of the sound in the
frequency domain. This is the sense in which the term "filter" is used in this article.

Filters allow you to select a range of frequencies in a sound, and either amplify or reduce those
frequencies. Decreasing high frequencies or increasing low frequences within a sound makes it seem

http://beausievers.com/synth/synthbasics/ 8/15
5/3/2015 Synthesis Basics

"darker" or muffled, while increasing high frequencies or decreasing low frequences makes the sound
seem "brighter." Filtering like this happens in real life all the time. If you're talking to someone and
hold a large book in front of your mouth, the book filters out much of the high frequency content of
your voice, causing it to sound dark and muffled.

Low pass and high pass filters

Audio example of a low pass filter.

Audio example of a high pass filter.

A low pass filter allows low frequencies to pass through the filter and blocks out high frequencies,
causing the sound to seem muffled. The range of frequencies blocked by a filter is called the stop band.
The range of frequencies allowed to pass through the filter is called the pass band. The transition from
pass band to stop band is gradual, and happens over a range called the transition band. The width of the
transition band depends on the rate at which the filter reduces the signal. This rate is called the slope,
which is measured in decibels per octave. (A detailed discussion of the decibel as a unit of amplitude
measurement is beyond the scope of this article. As always, the Wikipedia article on decibels delivers
the goods.) The frequency where the filter has reduced the level of the signal to about seven tenths its
original level is called the cutoff frequency. A high pass filter does the opposite of a low pass filter:
blocks low frequencies and lets high frequencies pass through.

http://beausievers.com/synth/synthbasics/ 9/15
5/3/2015 Synthesis Basics

Technical note: The exact amount of level reduction that defines the cutoff frequency of a filter is
0.707 times the maximum level of the signal. The power of a signal is proportional to the amplitude of
the signal squared, and at 0.707 times the maximum level, the power has dropped in half. For this
reason, the cutoff frequency is also called the "half-power point." Since this drop in power results in a
drop in volume of about 3 decibels, the cutoff frequency can also be called the "3dB point."

Band pass and band reject filters

Audio example of a band pass filter.

Audio example of a band reject filter.

A band pass filter is like a low pass and a high pass filter used in combination to isolate a group of
frequencies to pass through while everything else gets cut out. A band reject filter is the opposite of a
band pass filter: a band of frequencies is blocked while everything else is let through.

http://beausievers.com/synth/synthbasics/ 10/15
5/3/2015 Synthesis Basics

Properties of filters

These filters have a number of attributes over which we have some control. For low pass and high pass
filters, we can change the cutoff frequency, allowing control of the range of frequencies affected.
Running a lead synthesizer through a low pass filter and slowly moving the cutoff frequency from high
to low and back is a popular technique used in electronic dance music.

With band pass and band reject filters, rather than changing the cutoff frequency, we change the center
frequency and width of the affected band.

With some filters we can also change the slope, which determines how quickly the stop band
frequencies are reduced in level.

Many filters allow for a change in resonance or Q. Resonance occurs when sound in the pass band near
the cutoff frequency is sent back into the filter as it comes out, creating feedback. The amount of
feedback affects the volume of these frequencies, as well as the timbre of the sound. A wah-wah effect
box is a resonant low pass filter with a foot pedal controlling the cutoff frequency.

Audio example of a low pass filter with resonance.

http://beausievers.com/synth/synthbasics/ 11/15
5/3/2015 Synthesis Basics

Let's add a low pass filter module to our imaginary synthesizer. We'll place it between the oscillator
and our VCA. Depending on how we control it, this filter can make all kinds of changes to our synth
sound, from gently decreasing the harshness of the high frequencies to making a variety of more
intense special effects.

Here's a sample of what the synthesizer described in this diagram might sound like. As the sample
progresses, the frequency of the low pass filter moves up and down again.

Here's a realization of this patch in PureData.

Control signals
In order to get the most mileage out of our synthesizer, we need a way of controlling each of its
components internally. While many synthesizers have myriad knobs and buttons for controlling the
sound, most people only have two hands, and it's difficult to accurately twist more than one or two
knobs at a time. Fortunately, almost every module in a synthesizer can be controlled by another
module. Our imaginary synthesizer does this already: the frequency of the oscillator and the volume
level of the VCA are controlled by our keyboard.

Envelope generators

One way we can control signals within a synthesizer is by using a module called an envelope generator.
When an envelope generator receives an "on" gate signal, it sends out a new signal that can be used to
control another module. Unlike an oscillator, which repeats its signal over and over again, an envelope
generator sends out its signal only once. Like an oscillator, we can look at the signal produced by an
envelope generator on a time domain graph:

http://beausievers.com/synth/synthbasics/ 12/15
5/3/2015 Synthesis Basics

For every fraction a of a second the envelope generator is active, it sends a control signal that can be
used to tell another module what to do. One way to think about envelopes is as maps for automatic
knob control. For instance, the envelope pictured above starts by sending out a signal that gradually
moves up from zero to one, which is like turning a knob from the far left, lowest position, to the far
right, highest position. After that, the signal moves gradually down to about 0.7, which is like turning
the knob to the left a little bit, and so on.

Envelopes like the one pictured here are called ADSR envelopes, so named for their four stages:
Attack, Decay, Sustain, and Release. When we put an ADSR envelope module in a synthesizer, we
specify exactly what is to happen during each stage of the envelope after an "on" gate signal is
received. For example, the envelope pictured above has an attack stage that lasts 250 milliseconds,
where the level increases to 1. After that, it has a decay stage lasting 200 milliseconds where the level
decreases to 0.7. During the sustain stage, the level stays at 0.7 for as long as the envelope generator is
receiving an "on" gate signal. Sustain stages do not have a specified duration. When the gate signal
changes to "off," we enter the release stage, where the level takes 200 milliseconds to drop to 0.

ADSR envelopes are often used to control the volume of a sound, although they can be used to control
almost anything inside a modular synthesizer. For example, the same envelope could control a resonant
low pass filter, making a cool sweeping and wooshing effect evolve as we play each note.

Let's add an envelope generator to our synthesizer below. This envelope will cause the volume of the
sound from the oscillator to fade in gradually, sustain, and then drop off sharply. We'll use an ADSR
envelope generator connected to the level input of our VCA:

http://beausievers.com/synth/synthbasics/ 13/15
5/3/2015 Synthesis Basics

Here's a sample of what the synthesizer described in this diagram might sound like.

Here's a realization of this patch in PureData.

Low frequency oscillators (LFOs)

Another type of module frequently used to control other modules is the low frequency oscillator, or
LFO. An LFO is just like a normal oscillator, it can have any waveform and amplitude we specify, but
it has a very low, sub-audio frequency, producing a very slowly oscillating signal generally used to
control other modules within a synthesizer. For example, an LFO might move the volume level of a
VCA up and down, creating a tremolo effect. LFOs are like little robots that turn knobs back and forth
for you.

Let's add an LFO to our synthesizer that causes the pitch of our oscillator to wiggle up and down a little
bit, like a violinist moves their hand to create vibrato. We're also going to use the envelope generator to
modulate the frequency of our filter, so we get a cool sweeping effect automatically on every note,
especially if we turn up the filter's resonance. Using a control signal to change the frequency of another
module is called frequency modulation, or FM, as indicated in the diagram below:

http://beausievers.com/synth/synthbasics/ 14/15
5/3/2015 Synthesis Basics

Here's a sample of what the synthesizer described in this diagram might sound like.

Here's a realization of this patch in PureData.

Conclusion and Further Reading

Almost every commercially available synthesizer and music synthesis software package operates using
these basic principles. With this knowledge and some ingenuity, you'll never have to use a horrible
synth preset again.

This is, however, not the end. There's quite a bit of excellent literature on sound synthesis and
electronic music, and one of the best ways to learn is to read constantly. That said, here's some good
stuff:

The Computer Music Tutorial, by Curtis Roads

The Csound Book, ed. Dr. Richard Boulanger
Computer Music: Synthesis, Composition, and Performance, by Charles Dodge and Thomas
Jerse
Microsound, by Curtis Roads
The Computer Music Journal
Advanced Programming Techniques for Modular Synthesizers, ed. James J. Clark

http://beausievers.com/synth/synthbasics/ 15/15