Samsung cs21s8ml6x, cs21m20ml6x ks9b (P) Service Manual PDF
Samsung cs21s8ml6x, cs21m20ml6x ks9b (P) Service Manual PDF
Chassis : KS9B(P)
Model : CS21S8ML6X/XSE
CS21M20ML6XXTT
SERVICE Manual
5. PCB Diagrams
6. Schematic Diagrams
ELECTRONICS
This Service Manual is a property of Samsung Electronics Co.,Ltd. © Samsung Electronics Co., Ltd. Aug. 2004
Any unauthorized use of Manual can be punished under applicable Printed in Korea
AA82-01979A
International and/or domestic law.
Specifications
1. Specifications
1. Usually, a color TV-VCR needs only slight 5. Avoid overload. Excessive signal from a
touch-up adjustment upon installation. Check sweep generator might overload the front-end
the basic characteristics such as height, of the TV. When inserting signal markers, do
horizontal and vertical sync and focus. not allow the marker generator to distort test
results.
2. Observe the picture for good black and white
details. There should be objectionable color 6. Connect the TV only to an AC power source
shading; if color shading is present, with voltage and frequency as specified on the
demagnetize, perform purity and convergence backcover nameplate.
adjustments described below.
7. Do not attempt to connect or disconnect any
3. Use the specified test equipment or its wires while the TV is turned on. Make sure
equivalent. that the power cord is disconnected before
replacing any parts.
4. Correct impedance matching is essential.
8. To protect against shock hazard, use an
isolation transformer.
3. Adjust the FOCUS control for well defined scanning lines in the center area of the screen.
1. To enter the “Service Mode”, Press the remote-control keys in this sequence :
2-5-2(A) ADJUST
✴ TDA959X
ADJUST
OPTION
OPTION1
G2-ADJUST
RESET
SPM-836EE1
2-5-2(B) OPTION
2-5-2(C) G2-ADJUST
1 V Shift 2 V Amp
3 V Slope 4 V SC
5 H Shift
CHECK VOLTAGE
PIN NO SYMBOL PIN FUNCTION
S-By P-On
1 P1.3/T1 port 1.3 or Counter/Timer 1 input
2 P1.6/SCL port 1.6 or IIC-bus clock line
3 P1.7/SDA port 1.7 or IIC-bus data line
4 P2.0/TPMW port 2.0 or Tuning PWM output
5 P3.0/ADC0 port 3.0 or ADC0 input
6 P3.1/ADC1 port 3.1 or ADC1 input
7 P3.2/ADC2 port 3.2 or ADC2 input
8 P3.3/ADC3 port 3.3 or ADC3 input
9 VSSC/P digital ground for m-Controller core and periphery
10 P0.5 port 0.5(8mA current sinking capability for direct drive of LEDs)
11 P0.6 port 0.6(8mA current sinking capability for direct drive of LEDs)
12 VSSA digital ground of TV-processor
13 SECPLL SECAM PLL decoupling
14 VP2 2nd supply voltage TV-processor(+8V)
15 DECDIG supply voltage decoupling of digital circuit of TV-processor
16 PH2LF phase-2 filter
17 PH1LF phase-1 filter
18 GND3 ground 3 for TV-processor
19 DECBG bandgap decoupling
20 EWD East-West drive output
21 VDRB vertical drive B output
22 VDRA vertical drive A output
23 IFIN1 IF input 1
24 IFIN2 IF input 2
25 IREF reference current input
26 VSC vertical sawtooth capacitor
27 AGCOUT tuner AGC output
28 SIFIN1/DVBIN1 SIF input 1 / DVB input 1
29 SIFIN2/DVBIN2 SIF input 2 / DVB input 2
30 GND2 ground 2 for TV processor
31 SIFAGC/DVBAGCR narrow band PLL filter
CHECK VOLTAGE
PIN NO SYMBOL PIN FUNCTION
S-By P-On
33 HOUT horizontal output
34 FBISO flyback input/sandcastle output
✴ TDA93XX(IC201S)
NOTE : PVS,PVA, PHS, parameters must be aligned using the 50Hz vertical-field rates.
In the Service Mode, various can be selected via the Option Table. Example:
✴ TDA93XX (IC201S)
SPM-802XX REMARK
1 LNA ON/OFF CIS : ON Others : OFF
3-1 CS21S8ML6X/XSE
You can search for the updated part code through ITSELF web site.
URL : http://itself.sec.samsung.co.kr No Code No Description Specification Q’ty S.N.A
3-2 CS21M20ML6XXTT
You can search for the updated part code through ITSELF web site.
URL : http://itself.sec.samsung.co.kr No Code No Description Specification Q’ty S.N.A
You can search for the updated part code through ITSELF web site.
URL : http://itself.sec.samsung.co.kr
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
ASSY P/MATERIAL
1 AA92-08951E ASSY P/MATERIAL;21M20,HQ,TTSEC(330) S.N.A
ASSY ACCESSORY
1 M0045 AA92-09299L ASSY ACCESSORY;GOLD RUSH 2,REMOCON TM75, S.N.A
You can search for the updated part code through ITSELF web site.
URL : http://itself.sec.samsung.co.kr
4-2 CS21S8ML6X/XSE
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
Level Loc. No. Code No. Description ; Specification Remark Level Loc. No. Code No. Description ; Specification Remark
ASSY P/MATERIAL
1 AA92-03098L ASSY P/MATERIAL;21S8 S.N.A
ASSY ACCESSORY
1 M0045 AA92-10312A ASSY ACCESSORY;21S8,STEREO,ID,KS9B,DVD S.N.A
5. PCB Diagrams
5-1 MAIN
6. Schematic Diagrams
6-1 MAIN 1
This Document can not be used without Samsung’s authorization.
TP07 TP01
TP10 TP06
TP09
TP08 TP02
TP09 TP04
TP10 TP05
TP05
TP08
TP07
TP06
TP04
TP01 TP02
6-2 MAIN 2
This Document can not be used without Samsung’s authorization.
TP18 TP11
TP19 TP12
TP23
TP16
TP13 TP14 TP15 TP20
TP22 TP21
TP18
TP21 TP14
TP11
TP22 TP15
TP12
TP24
TP23 TP16
TP24 TP17
6-3 MAIN 3
This Document can not be used without Samsung’s authorization.
TP25
TP26
TP26
TP25
6-4 MAIN 4
This Document can not be used without Samsung’s authorization.
6-5 MAIN 5
This Document can not be used without Samsung’s authorization.
6-6 MAIN 6
This Document can not be used without Samsung’s authorization.
6-7 MAIN 7
This Document can not be used without Samsung’s authorization.
6-8 MAIN 8
This Document can not be used without Samsung’s authorization.
System Switching