17CE3501 WATER RESOURCES ENGINEERING

Course Category Program Core Credits: 3

Course Type: Theory Lecture - Tutorial - Practice: 3 - 0 - 0

Prerequisites: -- Continuous Evaluation: 30

Semester end Evaluation: 70

Total Marks: 100

Course Upon successful completion of the course, the student will be able to
outcomes
CO1 understand various irrigation methods and Irrigation management practices in the field.

CO2 evaluate the Run-off and evaluate the ground water yield.

CO3 evaluate and Design of various Channel sections.

CO4 evaluate reservoir capacity and summarize various types of hydraulic structures

Contribution PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO

of Course 1 2 3 4 5 6 7 8 9 10 11 12 1 2
Outcomes
towards CO1 H M L
achievement of
Program CO2 H M M M
Outcomes

(L – Low, M - CO3 H M M H
Medium, H –
High) CO4 H H M M L H

Course
Content UNIT – I

1. IRRIGATION:WATER APPLICATION METHODS

Definition; Necessity; Scope of irrigation science; Benefits of irrigation; Ill-effects of

irrigation; Types of irrigation and methods of applying water to crops; Uncontrolled or
 wild flooding; Free flooding; Contour laterals; Border strip method; Check flooding; Basin
flooding; Zig zag method; Furrow method; Contour Farming; Sub-surface irrigation;
Sprinkler Irrigation; Drip irrigation.

2. WATER REQUIREMENT OF CROPS:

Saturation capacity; Field capacity; Wilting point; Available moisture and readily available
moisture; Duty and Delta; Base period; Relation between Duty and Delta; Factors
affecting duty; Methods of improving duty; Gross command area; Culturable command
area; Culturable cultivated and uncultivated area; Kor depth and Kor period; Standards of
irrigation water; Assessment of irrigation water.

UNIT – II

3. HYDROLOGY:

Introduction to Engineering Hydrology and its applications; Hydrologic cycle;

Precipitation types; Rain gauges; Computation of average rain fall over a basin; Run off;
Factors affecting run off; Computation of run-off. Hydrograph; definition of Unit
hydrograph; Limitations and applications of unit hydrograph, construction of a flood
hydrograph resulting from rainfall of unit duration; Application of unit hydrograph to
construction of a flood hydrograph resulting from two or more periods of rainfall;
Construction of unit hydrograph of different unit duration from a unit hydrograph of some
given unit duration. S-hydrograph

4. WELL IRRIGATION:

Introduction; Aquifer; Aquicludes; Aquifuge; Specific yield; Specific retention; Divisions

of sub–surface water; Water table; types of aquifers; Dupit’s theory for confined and
unconfined aquifers; Constant level pumping test, Recuperation test.

UNIT-III

5. IRRIGATION CHANNELS – SILT THEORIES & DESIGN PROCEDURE:

Classification; Canal alignment; Silt theories–Kennedy’s theory, Lacey’s regime theory;

Kennedy’s method of channel design; Silt supporting capacity according to Kennedy’s
theory; Use of Garret's diagram in channel design; Lacey’s theory applied to channel
design; Use of Lacey's regime diagrams; Drawbacks in Kennedy’s theory; Defects in
Lacey’s theory; Comparison of Kennedy’s theory and Lacey’s theory

6. WATERLOGGING, CANAL LINING

Waterlogging, causes, effects and remedial measures. Lining of Irrigation canals, Types of
lining; Design of lined canal
 UNIT-IV

7. DAMS IN GENERAL:

Classification; Gravity dams, Arch dams, Buttress dams, Steel dams, Timber dams, Earth
dams and rock fill dams; factors governing selection of site for a dam.

8. RESERVOIR PLANNING:

Selection of site for a reservoir; Zones of storage in a reservoir; Storage capacity and yield;
Mass inflow curve and demand curve; Calculation of reservoir capacity for a specified
yield from the mass inflow curve; Determination of safe yield from a reservoir of a given
capacity; Life of reservoir;

Text books Learning Resources:

and Reference
books
Text Books:

1. Irrigation and water power Engineering by Dr. B.C. Punmia & Dr. Pande B.B.Lal;
Laxmi Publications Pvt. Ltd., New Delhi., 2006.

2. Irrigation Engineering and Hydraulic structures by S. K. Garg; Khanna publishers New

Delhi, 2006.
3. Irrigation Engineering and Hydraulic structures by SR Sahasrabudhe, Katson Publishing
house.2005

Reference Books:
1. Irrigation, Water Resources & Water Power Engineering by Dr. P.N. Modi; standard Book
House, New Delhi.,2006
2. Irrigation water power and water resources engineering by K R ARORA, Standard
published distributors, New Delhi.,2006.
3. A text book of hydrology by Dr.P.Jayarami Reddy, published by Laxmi Publications.
4. Journals in Water resources

E-resources www.nptel.ac.in/couses/105104103
and other
digital
material
 17CE3502 ENVIRONMENTAL ENGINEERING

Course Category: Programme core Credits: 3

Course Type: Theory Lecture - Tutorial - Practice: 3-0-0

Prerequisites: 17CH1102 - Engineering chemistry Continuous Evaluation: 30

17MC1407A -Environmental Semester end Evaluation: 70
studies
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will have an ability to

understand source of water for water supply scheme with reference to quantity
CO1
and quality of water

CO2 understand and apply the methods of treatment for purification of water

CO3 analyse the distribution of water

understand the concepts of collection & conveyance, Quality and quantity of

CO4
sewerage

CO5 apply appropriate treatment and disposal methods of sewage and septage

Contribution PO 1 PO PO PO PO PO PO PO PO PO PO PO PSO PSO

of Course 2 3 4 5 6 7 8 9 10 11 12 1 2
Outcomes
towards CO1 L L
achievement
of Program
Outcomes CO2 H L L

CO3 H H M M M H
(L – Low,
M- CO4 M M H M
Medium, H
– High) CO5 H M H H H M H H

Course Content UNIT – I

1.INTRODUCTION, QUANTITY AND COLLECTION & CONVEYANCE OF

WATER
Objectives of water supply systems, Per capita consumption; Design period; Types of
demands; Fluctuations in demand; Prediction of population.

Types of intakes; Capacity and design of pipes; Materials for pipes; Types of pumps.

2. QUALITY OF WATER
Impurities in water; Routine water analysis - physical, chemical and bacteriological tests;
Standards for drinking water; Water borne diseases.

UNIT – II

3. PURIFICATION OF WATER
Purification of water; Plain sedimentation; coagulation and types of Coagulants;
Sedimentation and coagulation tanks; Design aspects; Theory of filtration; Slow sand
and rapid sand filters; Construction and Operation; Disinfection methods-chlorination;
Removal of hardness, Methods of removal; De-fluoridation.

4. DISTRIBUTION SYSTEMS
Methods of supply; Layouts; Distribution reservoirs; Capacity of balancing tank;
Methods of analysis of distribution systems; valves. Plumbing-pipes and fittings; Traps;
One pipe and Two pipe systems.
UNIT – III

5. INTRODUCTION TO SANITARY ENGINEERING AND SEWERS AND

SEWER APPURTENANCES
Sanitation; Conservancy and water carriage system; Sewerage systems; Relative merits,
Sanitary and storm water sewage; Estimation of their quantities.

Sewers-types, design, construction and maintenance; sewer appurtenances-types.

6.QUALITY OF SEWAGE AND PRIMARY TREATMENT OF SEWAGE

Characteristics of sewage-physical, chemical and biological; decomposition cycles; BOD

and COD

Primary treatment- theoretical concepts of Screens; Grit chamber; Skimming tanks;

design aspects of Sedimentation tanks.
UNIT – IV

7.SECONDARY TREATMENT OF SEWAGE

Trickling filters; high rate trickling filters at primary level, Principles of action;
Recirculation; Operational problems and remedies; Activated sludge process; Principle
of action; Methods of aeration; Sludge bulking; Sludge volume index.

8. SEWAGE DISPOSAL; SEPTIC TANKS & FEACAL WASTE AND SEPTAGE

 MANAGEMENT

Methods; Disposal by dilution; Self purification process; Oxygen sag; Zones of pollution
of river; Disposal by irrigation.

Septic tank-Design; effluent disposal; Septage Management, government policies and

programs, value chain, environmental aspects, on site contaminant system, waste
characterisation and treatment options.
Text books and Text Books:
Reference books
1. Elements of public health engineering by K. N. Duggal; S. Chand
& Company Ltd., New Delhi, 2014.
2. Environmental Engineering Vol. I& II - Water supply engineering by S. K. Garg;
Khanna Publishers, New Delhi, 2017.

Reference Books:
1.Water Supply and Sanitary Engineering Vol. 1 by Gurucharan Singh;
Standard Publishers Distributors, Delhi, 2009
2.Water Supply and Sanitary Engineering by G.S. Birde; Dhanpatrai and sons,Delhi,
1998.
3. Manual on Water Supply & Treatment; CPH and EEO, Ministry of Urban
Development; Govt. of India, New Delhi,2005

E-resources and NPTEL:http://nptel.ac.in/courses/105104102/

other digital http://nptel.ac.in/courses/105106119/
material

17CE3503 STRUCTURAL ANALYSIS

Course Category: Program Core Credits: 3

Course Type: Theory
Mandatory course Lecture: Tutorial :Practice: 3-0-0
Continuous Evaluation: 30
Prerequisites: 17CE3403 Mechanics of Materials Semester end Evaluation: 70
Total Marks: 100

Upon successful completion of the course, the student will be able to

CO1 draw and interpret influence line diagrams

COURSE
OUT CO2 apply energy methods for analysis of indeterminate beams and frames
COMES
CO3 analyze statically indeterminate structures using force and displacement methods

CO4 analyze multistory frames for vertical and horizontal loads by approximate methods

Contribution PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO

of Course 1 2 3 4 5 6 7 8 9 10 l1 l2 1 2
Outcomes CO1
Towards H M L L M M
achievement CO2
H L M L L M M
of Program CO3 H
Outcomes L M L L M M
(L – Low, CO4
M- Medium,
H– High) H L M L L M M

UNIT – I

INFLUENCE LINES FOR STATICALLY DETERMINATE STRUCTURES:

1. EQUILIBRIUM PRINCIPLES AND ITS APPLICATION:

Content
Influence line for beam reaction, Shearing forces, Bending moment, Calculation of
maximum and absolute maximum bending moment for rolling loads.

2. MULLER BRESLAU PRINCIPLE AND ITS APPLICATION:

Influence line for beam reaction, Shearing forces, Bending moment.

UNIT – II

ANALYSIS OF INDETERMINATE STRUCTURES USING ENERGY

METHODS;

3.BEAMS:
Strain Energy Method for analysis of continuous beams.
4.FRAMES:
Analysis of rigid & pin jointed frames up to second degree of redundancy. Lack of fit and
Temperature variation.
UNIT III

ANALYSIS OF INDETERMINATE STRUCTURES:

5.FORCE METHOD

Propped cantilever by consistent deformation method.

Fixed beams for different loadings, Effect of sinking and rotation of support.
Clapeyron’s theorem of three moments.

6. DISPLACEMENT METHODS:

Slope deflection method for continuous beam and portal frames.

Moment distribution method for continuous and portal frames.
UNIT IV

APPROXIMATE METHODS OF ANALYSIS FOR MULTISTORY FRAMES:

7.KANI’S METHOD:

Introduction and principles of the kani’s method, Application of the method to continuous
beams, Application of method to the analysis of portal frames without side sway,

8.ANALYSIS OF GRAVITY & LATERAL LOADS

Substitute frame method with various examples, Portal method and cantilever method .
 Text Books:

1.Analysis of structures by Volume I –17th Edition by Vazirani & Ratwani; & Volume –II
16th Edition by Vazirani & Ratwani, Khanna Publications; Delhi, 2015.
2. Structural Analysis by S.S. Bhavikatti, Volume-I and II, 4th Edition, Vikas Publishing
house PVT Ltd, 2014.
Text books
and Reference Books:
Reference
Books 1. Structural analysis by Hibbeler, 6th Edition, Pearson India Education Services Pvt
Ltd.2015
2. Structural Analysis by R.Vaidyanathan Volume-I and II, 3rd Edition, Laxmi
Publications (P) Ltd, 2012.
3. Theory of structures by S. Ramamrutham, 9th Edition, Dhanapat Rai Publications, 2014.
4. Basic Structural Engineering by C.S Reddy, Tata McGraw Hill, Third Edition.
5. Theory of structures Vol – I by G.S. Pandit and S.P Gupta and R. Gupta by Tata
McGraw Hill Ltd., New Delhi.
3.E-resources http:// nptel.ac.in/courses/105101085
and other digital http://nptel.ac.in/courses/105105166
material: http://nptel.ac.in/courses/105101086
OPEN ELECTIVES
 17CE2504/A GEOSPATIAL TECHNOLOGIES

Course Category: Open Elective -I Credits: 3

Lecture - Tutorial -
Course Type: Theory Practice: 3-0-0
Continuous
Prerequisites: NIL Evaluation: 30
Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will be able to

apply the recent advances GIS technology in various fields of

CO1
engineering
evaluate the opportunities and available methods for integrating GIS in
CO2
various engineering applications
CO3 understand large scale maps using satellite imageries.

Contribution of PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO

Course Outcomes 1 2 3 4 5 6 7 8 9 10 11 12 1 2
towards
achievement of CO1 H L M L M
Program
Outcomes
CO2 H H L M L M
(L – Low, M -
Medium, H –
High) CO3 H L M L M

Course Content UNIT I

1.INTRODUCTION TO GIS

Introduction to GIS, History of GIS, Early developments in GIS, Applications of GIS

2.MAP AND MAP SCALES

Introduction to Maps, History of Maps, Map Scales, Types of Maps, Map and Globe
UNIT II

3.GEOREFERENCING AND PROJECTION

Understanding Earth ,Coordinate System, Map Projection, Transformation,

Georeferencing

4.SPATIAL DATABASE MANAGEMENT SYSTEMS

Introduction, Data Storage, Database Structure Models, Database Management system,

Entity Relationship, Model Normalization.

UNIT III

5.DATA MODELS AND DATA STRUCTURES

Introduction, GIS Data Model, Vector Data Structure, Raster Data structure ,Geo database
and metadata.

6.SPATIAL DATA INPUT AND EDITING

Primary Data, Secondary Data, Data Editing, Data types – Spatial and Non Spatial
(attribute) data.

UNIT IV
7.MODELLING IN GIS:

Introduction to Web GIS, Digital Terrain Modelling, Digital Elevation Modelling,

Triangular Irregular Network.

8.APPLICATIONS OF GIS:

Multidisciplinary applications of GIS.

Text books 1. Remote Sensing & Geographical Information Systems by M.Anji Reddy,
BPS Publications-Hyderabad,4th edition 2011.
2. Remote Sensing & GIS by Basudeb Bhatta, Oxford University Press, New Delhi 2011. .

1.Remote sensing and Image interpretation by TM Lillesand and RWKiefer; John Willey
and sons.7th edition, 2015

2. Remote sensing and Geographical information System by AM Chandra & SK

Reference books Ghosh;Narosa Publishing House, Second Edition New Delhi,2015

E-resources and
other digital NPTEL : http://nptel.ac.in/courses/105102015
material
 17CE2504/B QUALITY CONTROL AND QUALITY ASSURANCE

Course Category: Open Elective -I Credits: 3

Course Type: Theory Lecture - Tutorial - Practice: 3-0-0

Prerequisites: Continuous Evaluation: 30

----------------------------- Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will be able to

CO1 understand meaning of quality, quality standards

CO2 apply provisions of IS codes

CO3 apply QC techniques

CO4 analyze methods to improve quality

Contribution PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO

of Course 1 2 3 4 5 6 7 8 9 10 11 12 1 2
Outcomes
CO1 H M M H M H
towards
achievement
of Program CO2 M M M H M H
Outcomes
CO3 H H H M M H M M H
(L – Low,
M-
Medium, H H H M M H M M H
CO4
– High)

Course Content UNIT – I

1.QUALITY MANAGEMENT

Introduction – Definitions and objectives – Factors influencing construction

quality – Responsibilities and authority – Quality Management Guidelines.
TQM Guidelines
2.QUALITY SYSTEMS
Introduction - Quality system standard – ISO 9000 family of standards –
Requirements – Preparing Quality System Documents – Quality related
training – Implementing a Quality system – Third party Certification.
Quality circles.
UNIT – II

3.QUALITY PLANNING
Quality Policy, Objectives and methods in Construction industry -
Consumers satisfaction, Ergonomics - Time of Completion, IS code on
sampling, sampling plans, acceptance criteria, Inspection procedures - Total
QA / QC programme.
4.QUALITY PROCEDURES:
Develop, schedule and implement procedures for tracking control phase
meetings for definable features of work in the QC Plan. Notify appropriate
personnel of time, date and agenda.
UNIT – III

5.QUALITY CONTROL:
Definition, Objectives, Regulatory agencies, statically tolerances, Taguchi
concept, Statistical methods: Mean, variance, standard deviation, coefficient
correlation, coefficient regression, control charts, methods to evaluate
deviation, Contractor Quality Control, Quality Control Personnel, The
Three-Phase Control System: Preparatory Phase, Initial Phase and Follow-
up Phase. Conduct Meetings (preparatory and initial). Safety considerations
and Activity Hazard Analyses (AHAs).
6.QUALITY ASSURANCE:
Checklists for - Quality of Materials and processes, factors influencing
construction quality , Quality Assurance Personnel and their role, Document
actual discussions and provide minutes to attendees. Monitor work in place
through follow-up phase. Conduct additional control phase meetings, as
needed. Quality Management Record Keeping, The Contractor Quality
Control Report,

UNIT – IV

7.QUALITY IMPROVEMENT TECHNIQUES

Definition, objectives, quality appraisal, techniques of quality assurance, Quality

manual ,specification for few items.

8.FORENSIC ANALYSIS FOR BAD QUALITY

Deficiency Tracking System/Rework Items List, Pareto analysis, cause effect

diagram.
Text books and Text Books:
Reference books
1. Juran Frank, J.M. and Gryna, F.M. "Quality Planning and Analysis", McGraw
Hill,2001
2. Steven Mc Cabe, "Quality Improvement Techniques in Construction",
Addison Wesley Longman Ltd, 1998.
3. James, J.O’ Brian, "Construction Inspection Handbook" – Total Quality
Management, Van Nostrand,1997.
4. Statistical Quality Control 7th Edition , Eugene L Grant, McGraw-Hill
Series, 1980.
5. Fundamentals of Quality Control and Improvement, Amitva Mitra, 4ed,
Wiley India Private Limited, 2016

Reference Books:
1. Hutchins. G, ISO 9000 : A Comprehensive Guide to Registration,
Audit Guidelines and Successful Certification, Viva Books Pvt.
Ltd.,1994.

E-resources and NPTEL:http://nptel.ac.in/courses/

other digital
material
 17CE2505/A AIR AND NOISE POLLUTION

Course Category: Open Elective - II Credits: 3

Course Type: Theory Lecture - Tutorial - Practice: 3-0-0

Prerequisites: Continuous Evaluation: 30

Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will have an ability to

CO1 understand various types of air pollutants and their effects

understand the dispersion phenomenon of air pollutants with regard to

CO2
meteorological parameters

CO3 analyse the samples, pollutants from chimney stacks and ambient atmosphere

CO4 understand the various types of air pollution controlling equipment

CO5 understand the sources and controlling measures of noise pollution

Contribution PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO

of Course 1 2 3 4 5 6 7 8 9 10 11 12 1 2
Outcomes
towards CO1 H M
achievement
of Program
Outcomes CO2 H H M H

CO3 H H L H
(L – Low, M
- Medium, H CO4 M H M L H
– High)
CO5 M M H M L M H

Course Content UNIT – I

1.INTRODUCTION TO AIR POLLUTION
Composition of air, Air pollution-definition, Prominent air pollution disasters /
episodes, Sources of air pollution - Stationary and mobile sources;

2.CLASSIFICATION OF AIR POLLUTANTS AND ITS EFFECTS

Classification- Natural Contaminants; Particulate Matter Aerosols and Gaseous
pollutants; Primary and secondary pollutants.

Effects of air pollutants on human health; Effects on plants and economic effects.
UNIT – II

3.METEOROLOGY AND AIR POLLUTION

Meteorological factors influencing dispersion of air pollutants- Wind direction and
wind speed, Atmospheric stability, temperature inversions, Mixing height,
precipitation and humidity-measurement- Wind Rose; Plume behavior.

4.SAMPLING OF AIR POLLUTION

Stack sampler; Sampling Procedure-Sampling point – size - Isokinetic Conditions-
sampling of Particulate matter and Gases. Sampling methods. –Indian standard
methods of analysis of SO2 and NOx gases- Air Quality and Emission standards

UNIT – III

5. METHODS OF CONTROLLING AIR POLLUTION

Different means of control of effluent discharges into the atmosphere. Control of
Particulate matter by equipment -Settling chamber, inertial separators-fabric
filters- wet scrubbers-Electrostatic Precipitators

6. CONTROL OF GASEOUS POLLUTANTS

Controlling methods of Gaseous Emissions- combustion, adsorption, absorption,
closed collections and recovery systems- Control of SO2 and NOx gases
UNIT – IV

7.SOURCES AND EFFECTS OF NOISE POLLUTION

Sources Of Noise – Units And Measurements Of Noise – Characterization Of
Noise From Construction, Mining, Transportation And Industrial Activities,
Airport Noise – General Control Measures – Effects Of Noise Pollution –
Auditory Effects, Non-Auditory Effects

8. CONTROL OF NOISE POLLUTION

Prevention And Control Of Noise Pollution – Control Of Noise At Source, Control
Of Transmission, Protection Of Exposed Person – Control Of Other Types Of
Noise Sound Absorbent-standards
 Text books and Text Books:
Reference books
1.Air Pollution and Control by Rao, M.N and Rao, H.N., Tata McGraw Hill, New
Delhi, 2007
2. Environmental Engineering and Management, (2nd Edition) by Suresh,
l.S.K.Kartarai & Sons, 2005.
3.Environmental Engineering vol. II – Sewage disposal and air pollution engineering
by S. K. Garg; Khanna Publishers, Delhi.
Reference Books:
1. An Introduction to Air pollution by Trivedi, R.K., B.S.Publications, 2005.
2. Air pollution by Wark and Warner, Addison-Wesley Publications, 1998.

E-resources and other NPTEL:http://nptel.ac.in/courses/webcourse-contents/IIT-

digital material
delhi/Environmental%20Air%20Pollution/

17CE2505/B ENVIRONMENTAL IMPACT STUDIES

Course Category: Open Elective - II Credits: 3

Course Type: Theory Lecture - Tutorial - Practice: 3-0-0

Prerequisites: 17MC1407A-Environmental Studies Continuous Evaluation: 30

Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will have an ability to

CO1 understand impacts of the project on individual, society and environment

analyse the various indicators to assess the state of health, economy and standard of
CO2
life either prospering or deteriorating

CO3 apply the methodologies of EIA for projects under suitable conditions

CO4 assess the impacts on environment-case studies

Contributi PO 1 PO PO PO PO PO PO PO PO PO PO PO PSO PSO

on of 2 3 4 5 6 7 8 9 10 11 12 1 2
Course
Outcomes CO1 L M
towards
achieveme
nt of CO2 L M H L
Program
Outcomes CO3 M L L H

(L – Low, L M L
M-
Medium, CO4
H – High)

Course Content UNIT – I

1.INTRODUCTION TO EIA

Environment and its interaction with human activities-Environment Imbalances- Attributes,

impacts, Indicators, and measurements

2.SCOPE AND OBJECTIVES OF EIA

Concept of Environmental Impact assessment (EIA), Environmental Impact Statement,

Objectives of EIA, Advantages and limitations of EIA.
 UNIT – II

3.ENVIRONMENTAL INDICATORS FOR CLIMATE

Indicators for climate-Indicators for terrestrial subsystems-Indicators for aquatic subsystems-

Selection of indicators-

4.SOCIO-ECONOMIC INDICATORS

Socio-economic indicators-Basic information-Indicators for economy-Social indicators-

indicators for health and nutrition-Cultural indicators-Selection of indicators

UNIT – III

5.METHODOLOGIES OF EIA

Overview of methodologies, Adhoc, Checklist, Matrix, Network, Overlays, Benefit cost

analysis choosing a methodology, review criteria.

6.PREDICTION AND ASSESSMENT

Assessment of Impact on land, water, air, social & cultural activities and on flora & fauna-
Mathematical models- Public participation

UNIT – IV

7.ENVIRONMENTAL MANAGEMENT PLAN

Plan for mitigation of adverse impact on environment – Options for mitigation of impact on
water, air, land and on flora & fauna

8.CASE STUDIES

Case studies -water quality impact assessment – attributes, water quality impact assessment
of water resources projects-data requirements of water quality impact assessment for dams
impacts of dams on environment-case studies-On site and off site impacts during various
stages of industrial development, long term climatic changes, greenhouse effect, industrial
effluents and their impact cycle, Environment Impact of high ways, mining and energy
development.
Text books and Text Books:
Reference books
1. Anjaneyulu, VallManickam, “Environmental Impact Assessment Methodologies”,
2nd Edition ,B.S.Publications, 2007.
 2. CANTER L.W, “Environmental Impact Assessment”, Mcgraw Hill Pub.Co. New
York, 1996.
Reference Books:
1. Join, R.K. Urban L.V.Stracy, G.S. “Environmental Impact Analysis”, 2nd Edition,
VauNostrand Reinhold Co, 2004.

2. Ran, J.G. & Wooten, D.C., “Environmental Impact Assessment”, 2nd Edition,
McGraw Hill Pub. Co. Ltd, 2008.
E-resources and https://nptel.ac.in/courses/120108004/5
other digital
material

17CE2506/A GREEN BUILDINGS AND SUSTAINABILITY

Course Category: Open Elective - III Credits: 2

 Course Type: Theory Lecture - Tutorial - Practice: 0-0-0
Prerequisites: Nil Continuous Evaluation: 30
Semester end Evaluation: 70
Total Marks: 100

Course Upon successful completion of the course, the student will be able to
outcomes
understand green building and green building materials.
CO1

CO2 apply different rating agencies and features of green buildings.

CO3 understand sources of carbon emissions and its impact on climate.

apply Zonal regulation while preparing land use plans.

CO4

Contribution PO1 PO PO3 PO PO PO PO PO PO PO1 PO1 PO PSO1 PSO

of Course 2 4 5 6 7 8 9 0 1 12 2
Outcomes CO1 M H M M
towards
achievement CO2 H M H H M M L
of Program CO3 M H M M
Outcomes
(L – Low, M - CO4 M L M H H M M L
Medium, H –
High)
Course Content UNIT I

1.INTRODUCTION

Green Building, Why to go for Green Building, Benefits of Green Buildings.

2.GREEN BUILDING MATERIALS

Green Building Materials and Equipment in India, What are key Requisites for Constructing a
Green Building, Important Sustainable features for Green Building

UNIT II

3.GREEN BUILDING CONCEPTS

Indian Green Building Council, Green Building Movement in India, Benefits Experienced in Green
Buildings, Launch of Green Building Rating Systems, Residential Sector, Market Transformation;
Green Building Opportunities And Benefits: Opportunities of Green Building,

4.GREEN BUILDING PRACTICES

Green Building Features, Material and Resources, Water Efficiency, Optimum Energy Efficiency,
 Typical Energy Saving Approach in Buildings and Energy Efficiency,
UNIT III
Course Category: Open Elective - III Credits: 2

Course Type: 5.SUSTAINABILITY

Theory Lecture - Tutorial - Practice: 0-0-0

Prerequisites: Introduction, Human development index, Sustainable development

--------------------------------- and social
Continuous ethics, definitions
Evaluation: 30 of
sustainability, populations and consumptions.
Semester end Evaluation: 70
6.THE CARBON CYCLE AND ENERGY BALANCES
Total
Introduction, Climate science history, carbon sources and emissions, The Marks:
carbon cycle,100
carbon flow
pathways, and repositories, Global energy balance, Global energy balance and temperature model,
Greenhouse gases and Effects, Climate change projections and impacts

UNIT IV

7.SUSTAINABILITY IN PLANNING
Introduction, Land use and land; cover change, Land use planning and its role in sustainable
development-Zoning and land use planning, smart growth.

8.SUSTAINABILITY IN BUILT ENVIRONMENT

Environmentally sensitive design- low impact development, green infrastructure and conservation
design, Green buildings and land use planning, Energy use and buildings
Text books and Text Books:
Reference
books 1) International Green Construction Code Powered by Standard 189.1-2017.
2) Engineering Applications in Sustainable Design and Development By Bradley A. Striebig,
Adebayo A. Ogundipe and Maria Papadakis. First edition, 2016, CENGAGE Learning.

Reference Books:

1. Handbook on Green Practices published by Indian Society of Heating Refrigerating

and Air conditioning Engineers,2009.
2.Green Building Hand Book by Tomwoolley and Samkimings,2009.
E-resources and https://igbc.in/igbc/
other digital http://www.grihaindia.org/
material

17CE2506/B ADVANCED CONSTRUCTION MATERIALS

Course outcomes Upon successful completion of the course, the student will be able to
 CO4 understand building material like gypsum and various adhesives.

Contribution PO 1 PO PO PO 4 PO 5 PO 6 PO PO PO PO PO PO PSO PSO

of Course 2 3 7 8 9 10 11 12 1 2
Outcomes
towards CO1 L L M L M
achievement
of Program
Outcomes CO2 L L M L M

CO3 L L M L M
(L – Low,
M- L L M L M
Medium, H CO4
– High)

Course Content UNIT – I

1.MODERN MATERIALS:

Ceramics, Sealants for joints, fibre glass reinforced plastic,

refractories- composite materials, Geosynthetics.

2. PAINTS, ENAMELS AND VARNISHES:

Introduction, rubber paints, plastic emulsion paints, plastic paints, enamel paints, texture
paints, varnish, wax polish.

UNIT – II
3.SPECIAL CONCRETES:

Light Weight concrete, High density concrete, Fiber reinforced concrete, polymer concrete.

4.GLASS

Composition, classification, properties and types of glass.

UNIT – III
5. PLASTICS, BITUMEN:

Composition, polymerization, Classification of plastics, biodegradable plastic, Grades of

 Bitumen.

6. SOUND ABSORBENT MATERIALS:

Porous materials, porous-cum-elastic materials, perforated materials, Baffle materials.

UNIT – IV

7. Gypsum:

Introduction, plaster of Paris, gypsum wall plasters, gypsum

plaster boards, Non-load bearing Gypsum partition blocks.

8. Miscellaneous materials:

Adhesives- advantages and disadvantages, properties, types of

Adhesives; Different types of Building faced cladding materials;
heat insulating materials; water proofing materials.

Text books and Text Books:

Reference books
1. Engineering Materials by S. C. Rangwala; Charotar Publishing House, 33 Edn
2017.
2. Building materials by S.K Duggal; New Age International publishers, 3rd Edn, 2009.
Reference books:
1. Building materials by P.C Varghese; PHI Learning, 2nd Edn 2005.

E-resources and www:http://nptel.ac.in/courses/105102088/

other digital material
 17TP1507 PERSONALITY DEVELOPMENT AND CAMPUS
RECRUITMENT

Course Category: HS Credits: 1

Course Type: PRACTICE Lecture - Tutorial - Practice: 0 - 0- 2

Prerequisites: Internal Assessment: 100

Total Marks: 100

Course Upon successful completion of the course, the student will be able to
Outcomes
CO1 understand the corporate etiquette.

CO2 make presentations effectively with appropriate body language

CO3 be composed with positive attitude

 CO4 understand the core competencies to succeed in professional and personal life

Contributio PO PO PO PO PO PO PO PO PO PO PO PO PS PS
n of Course 1 2 3 4 5 6 7 8 9 10 11 12 O1 O2
Outcomes
towards CO1 M H
achievement
of Program
CO2 M H
Outcomes

(L – Low, M H
CO3
- Medium, H
– High)
CO4 M H

Course UNIT I
Content
ANALYTICAL THINKING &COMMUNICATION SKILLS

1. Self-Introduction, Shaping Young Minds - A Talk by Azim Premji (Listening Activity), Self
– Analysis, Developing Positive Attitude, Perception.
2. Verbal Communication; Non Verbal Communication (Body Language)

UNIT II

SELF-MANAGEMENT SKILLS & ETIQUETTE

3. Anger Management, Stress Management, Time Management, Six Thinking Hats, Team
Building, Leadership Qualities

4. Social Etiquette, Business Etiquette, Telephone Etiquette, Dining Etiquette

UNIT III

STANDARD OPERATION METHODS & VERBAL ABILITY

5. Note Making, Note Taking, Minutes Preparation, Email & Letter Writing

6. Synonyms, Antonyms, One Word Substitutes-Correction of Sentences-Analogies, Spotting

Errors, Sentence Completion, Course of Action -Sentences Assumptions, Sentence Arguments,
Reading Comprehension, Practice work

UNIT – IV
CAREER-ORIENTED SKILLS
 7. Group Discussion, Mock Group Discussions
8. Resume Preparation, Interview Skills, Mock Interviews

Reference [1] Barun K. Mitra, Personality Development and Soft Skills, Oxford University Press, 2011.
books [2] S.P. Dhanavel, English and Soft Skills, Orient Blackswan, 2010.
[3] R.S.Aggarwal, A Modern Approach to Verbal & Non-Verbal Reasoning, S.Chand &
Company Ltd., 2018.
[4] Raman, Meenakshi & Sharma, Sangeeta, Technical Communication Principles and Practice,
Oxford University Press, 2011.

E Sources & www. Indiabix.com

Other www.freshersworld.com
Digital
Material:

17CE3508 GEOTECHNICAL ENGINEERING

Course Category: Programme Core Credits: 3

Course Type: Theory with practical Lecture - Tutorial - Practice: 2-0-2

Prerequisites: Continuous Evaluation: 30

Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will be able

CO1 to understand the origins of soil and basic inter-relationships of soil components

to determine the index properties of soil and classify the soil based on the index
CO2
properties

CO3 to understand the Soil-Water Interaction

CO4 to understand compressibility and shear characteristics of soil

 CO5 to determine the basic engineering properties of soil

Contributio PO PO PO PO PO PO PO PO PO PO PO PO PSO1 PSO2

n of Course 1 2 3 4 5 6 7 8 9 10 11 12
Outcomes
towards CO1 H
achievemen
t of
Program CO2 H H H H
Outcomes
CO3 H H H H

(L – Low, CO4 H H H H H
M-
Medium, H
CO5 H H H
– High)
Course Content UNIT – I

1.INTRODUCTION, BASIC DEFINITIONS AND RELATIONS:

Scope of Geotechnical Engineering; Origin of Soils; Formation of soils; Types of soils;

Transportation of soils; Major soil deposits of India.

Phase diagrams; Volumetric relationships; Weight relationship; Volume-weight

relationships; Specific gravity of soils; Three phase diagram in terms of void ratio;
Inter–relationships;

2.INDEX PROPERTIES AND SOIL CLASSIFICATION:

Index Properties – Introduction, Particle Size Distribution Curve and its uses, Relative
Density, Plasticity of soils, Consistency Limits and uses, Plastic, consistency and liquidity
indices; Flow index & toughness index; Sensitivity; Thixotropy; Activity of soils.

Unified soil classification system; Indian standard soil classification system

Experiments:

1. Determination of water content by oven drying method

2. Determination of specific gravity by Density bottle & Pycnometer
3. Grain Size analysis – Mechanical analysis – wet and dry soil
4. Hydrometer analysis
5. Determination of liquid limit and plastic limit
6. Determination of field unit weight by Core cutter method
7. Determination of field unit weight by sand replacement method

UNIT – II

3.SOIL MOISTURE AND PERMEABILITY:

Flow of water in soils; Darcy’s law; Validity of Darcy’s law by Reynolds number;
Determination of coefficient of permeability* by constant head and variable head methods &
Indirect methods; Seepage velocity; General expression for laminar flow; Laminar flow
through porous media; Factors affecting permeability; Permeability of stratified soil
deposits.

4.EFFECTIVE STRESS PRINCIPLE:

Effective stress principle; Effective stress in a soil mass under different loading conditions –
effect of depth of water table, surcharge loading, capillary water

Experiments:

8. Determination of permeability by Constant head and Variable head methods

UNIT – III

5.SEEPAGE THROUGH SOILS

Seepage pressure; Quick sand conditions; Laplace equations*; Stream and potential
functions*; Characteristics of flow net; Uses of flow nets; Seepage through earth dams with
horizontal filter*; Uplift pressure; Flow net for anisotropic soils.

6.COMPACTION OF SOILS:

Introduction; Standard proctor test and modified proctor test; Compaction of clayey soil and
sand; Factors affecting compaction; Effect of compaction on properties of soils; Field
compaction of soils and field compaction control.

Experiments:

9. Standard proctor compaction test- Determination of OMC, MOD

UNIT – IV

7.CONSOLIDATION OF SOILS:

Introduction; Initial and secondary consolidation; Spring analogy for primary consolidation;
Terazaghi's theory of consolidation; Solution of basic differential equation;
Consolidation test; Determination of void ratio at various load increments-height of solids
and change in voids ratio methods; Consolidation test results; Determination of coefficient
of consolidation-square root of time and logarithmic time fitting methods

8.SHEAR STRENGTH OF SOILS:

Introduction; Mohr – coulomb theory; Different types laboratory of shear strength

tests*(Triaxial test Direct shear test; Unconfined compressive strength test; Vane shear
test*); Different drainage conditions and their field applicability; Mohr - coulomb
failure criterion; Shear characteristic of cohesive and cohesion less soils

Experiments:

10. Determination of C and φ by direct shear test

11. Determination of Shear strength by Vane shear test
12. Unconfined compression test- Determination of C and φ

Note:

1. In Laboratory tests only test procedures need be studied - no need of derivations of the
formulae used in the tests

2. Only test procedures according to relevant IS codes need be studied.

3.*methods and / or formulae only - no derivation of formulae needed.

Text books and Text Books:
Reference books
1. Soil Mechanics and Foundation Engineering by K.R. Arora; Standard Publishers &
Distributors, Naisarak, New Delhi.
2. Basic and Applied Soil Mechanics by Gopal Ranjan and A.S.R.Rao. published by
New Age International Ltd.,
Reference Books:
1. Geotechnical Engineering by B. J. Kasmalkar; Pune Vidyarthi Griha Prakashan,
Pune.
2. Modern Geotechnical Engineering by Alam Singh; CBS Publishers & distributors
Pvt. Ltd., Delhi.
3. Soil Mechanics and Foundation Engineering Vol. 1 by V. N. S. Murthy; Saikripa
Technical Consultants, Bangalore.
4. Soil Mechanics and Foundation Engineering by B. C. Punmia; Laxmi Publications,
Delhi.
5. Soil Mechanics Laboratory Manual by B.M. Das, Oxford University Press, 2002
6. Relevant Indian Standard Code Books – IS 2720
E-resources and Introduction to Soil Mechanics - http://nptel.ac.in/courses/105103097/
other digital
material Soil Mechanics - http://nptel.ac.in/courses/105101084/
Geotechnical Engineering Laboratory - https://nptel.ac.in/courses/105101160/

17CE3509 DESIGN OF CONCRETE STRUCTURES

Course Category: Programme Core Credits: 2

Course Type: Theory Lecture - Tutorial - Practice: 2-0-0

Prerequisites: 17CE3402 Concrete Technology Continuous Evaluation: 30

Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will have an ability to

CO1 design of R.C. beams

CO2 design of R.C slabs

CO3 design of R.C columns

CO4 design Footings

Contributio PO PO PO PO PO PO PO PO PO PO PO PO PSO PSO

n of Course 1 2 3 4 5 6 7 8 9 10 11 12 1 2
Outcomes
towards CO1 M H H H
achieveme
nt of
Program CO2 M H H H
Outcomes
CO3 M H H H

(L – Low, M H H H
M- CO4
Medium, H
– High)

Course Content UNIT – I

1.GENERAL:
Loading standards as per IS 875, Grades of steel and cement, Stress- Strain
characteristics of concrete and steel, Introduction to working stress method and Limit
State Method (L.S.D.) of design. Characteristic load and strengths, Design values,
Partial safety factors, Factored loads.
ALL DESIGNS IN LIMIT STATE METHOD
2. DESIGN OF BEAMS (IS456-2000).
 Design of singly reinforced rectangular section, Doubly reinforced rectangular section
and singly reinforced flanged sections.
Shear in R. C. beams; Diagonal tension and diagonal compression; Development
length; Anchorage bond; Flexural bond; Check for development length. Deflection
and cracking

UNIT – II
3. DESIGN OF ONE WAY SLAB (IS456-2000).
One way and Two-way action of slabs, Choosing slab thickness. Design of one way
slab.

4. DESIGN OF TWO WAY SLAB (IS456-2000).

Design of restrained and unrestrained Two way slabs as per I.S. code provision
(IS456-2000).
UNIT – III
5. DESIGN OF COLUMNS FOR AXIAL COMPRESSION (IS456-2000).
Define short and long columns, estimation of effective length of a column. Code
requirements on slenderness limits, minimum eccentricity and reinforcement. Design
of short column under axial compression with lateral ties and helical reinforcement.

6. DESIGN OF COLUMNS FOR COMBINED ACTION (IS456-2000).

Design of short columns subjected to combined axial load and uniaxial moment

UNIT – IV
7. DESIGN OF ISOLATED FOOTING (IS456-2000).
General aspects of footings and types of footings. Design and detailing of Isolated
Column footings.

8. DESIGN OF COMBINED FOOTING (IS456-2000).

Design and detailing of combined footings.

Text books and Text Books:

Reference books
1. Reinforced Concrete Vol-1,8th Edition by H.J.Shah, by Charotar Publication
House.
2. Reinforced Concrete (Limit State Design), 7th Edition by Ashok K.Jain, Nem
Chand & Bros., Roorkee
Reference Books:
1. Limit state designed of reinforced concrete – P.C.Varghese, Printice Hall of India,
New Delhi
2. Design of concrete structures by ArtherH.Nilson, Tata McGraw-Hill Publishing
Co. Ltd, New Delhi.
E-resources and http://nptel.ac.in/courses/105105105/
other digital
material http://nptel.ac.in/courses/105105104/

17CE3551 ENVIRONMENTAL ENGINEERING LAB

Course Category: Programme core Credits: 1

Course Type: Lab Lecture - Tutorial - Practice: 0-0-2

Prerequisites: Continuous Evaluation: 30

Semester end Evaluation: 70
Total Marks: 100

Course outcomes Upon successful completion of the course, the student will be able to

test the various parameters and understand their significance and

CO1
application.

recommend the suitability of water for various applications by

CO2
knowing water quality standards.

Course Content 1. Determination of total suspended and dissolved solids in water / sewage
sample.
2. Determination of fixed and volatile solids in water / sewage sample.
3. Determination of turbidity of water / sewage sample.
4. Determination of alkalinity of water sample.
5. Determination of acidity of water sample.
6. Determination of temporary and permanent hardness of water sample.
7. Determination of chloride concentration of water / sewage sample.
8. Determination of PH value of water / sewage sample.
9. Determination of optimum dose of coagulant.
10. Determination of dissolved oxygen of water / sewage sample.
11. Determination of fluorides in water sample.
12. Determination of biochemical oxygen demand (BOD) of waste water.
13. Determination of Chemical oxygen demand (COD) of waste water.
14. Determination of chlorine demand and residual chlorine.
15.Determination of nitrogen in water sample.

Text books and Text Books:

Reference books
Environmental Engineering Vol. I - Water supply engineering by S. K.
Garg; KhannaPublishers, Delhi. 18th Edn, 2004.
Reference Books:
 1. Manual on Water Supply & Treatment; CPH and EEO, Ministry of
Urban
Development; Govt. of India, New Delhi.
2. Is 3025 (part 2): 2004 iso 11885:1996 Indian standard methods of
sampling and test (physical and chemical) for water and waste
water ,* part 2 determination of 33 elements by inductively coupled
plasma atomic emission spectroscopy

E-resources and http://www.nitttrchd.ac.in/sitenew1/nctel/civil.php

other digital
material