Interference and Diffraction PDF
Interference and Diffraction PDF
Abstract:
The duality of light waves can sometimes be a difficult concept for high school level students to understand.
To help demonstrate this dual personality the photoelectric effect often is used to show light acting as a
particle (photons) and interference and diffraction can depict light’s wave nature. However, at a high school
level these principles can be difficult to apply and describe in the classroom. This lesson plan focuses on the
wave nature of light and utilizes real-world examples and straightforward activities to explain the complexities
of interference patterns and the diffraction of electromagnetic waves.
Objectives:
1) Identify in which interference and diffraction will occur.
2) Describe how electromagnetic waves interfere with one another to create bright and dark fringes.
3) Solve problems using constructive and destructive interference equations.
4) Describe how electromagnetic waves diffract (bend) around objects and create bright and dark fringes.
5) Predict the locations of bright and dark fringes caused by diffraction using the diffraction equation.
6) Describe how diffraction is related to an optical instrument’s resolution.
7) Describe what a Morie’ pattern is and how it is formed.
8) Recognize real-world applications of interference and diffraction of light.
9) Describe the properties of lasers and their applications.
1) Describe the conditions for the interference and diffraction of light to occur.
2) Explain the principles behind interference and diffraction of light mathematically and conceptually.
3) Describe the superposition of light waves and how interference patterns are produced.
4) Solve for the path difference, wavelength and angle for constructive and destructive interference.
5) Relate the equations dsincalc. = m and y = Ltanobser to solve for the path angle of a diffraction grating.
6) Describe how interference and diffraction of light is used in modern research and technology.
7) Describe how Moiré’ patterns are formed and names Moiré’ patterns found in nature.
8) Describe how lasers work and how they are used in real-world applications.
Materials and Supplies: (These are only suggested supplies; most demonstrations can be found in
video form if needed)
*Alternative Activity
Plan: (This plan is designed for ten days* with 50 minute periods but can be adapted for any schedule)
Sections of the lesson plan (especially the PowerPoints) can be added on to, deleted or modified to meet
curriculum needs or time restraints. Everything in bold is either included in this document or is in a
separate heading that should be included. Note about PowerPoints: I usually print out the PowerPoints as
notes for my students (that is why they are wordy) and then have them highlight certain points and write
extra notes. They can be edited to meet your note-taking teaching style. Also, I am including shorter
PowerPoints on each topic so they can be used in a flipped classroom and a list of optics websites.
Day 1:
Day 2:
1) Begin the PowerPoint Presentation Diffraction. With spectroscopes point out how useful a tool
they are and even though the ones that are used in the classroom involve visible light there are
many spectrometers that use other portions of the electromagnetic spectrum.
2) If time permits pass out Introduction to the Interference and Diffraction of Light Worksheet.
3) These questions can be done as a class, in groups, or individually. They can be reviewed by the
teacher or students can direct the discussion. This can be given as homework or in class.
Day 3:
Day 4:
Day 5:
Day 6:
1) Review and Explain Procedures of spectroscopy; see Interference and Diffraction Demonstrations.
A spectroscope lab can be done here, but most students should have done a spectroscope lab in
chemistry. I have included YouTube videos which are good reviews of spectroscopy. I have also
included some videos on diffraction, interference and lasers which would all make good reviews.
2) Spectroscope Videos: rhcrcgvp channel
a. Astronomy-spectroscopy-1/3 (9:59): good basics on light and spectroscopy, speaks on
Kirchoff’s Laws of the continuous, emission, and absorption spectrum (focus mainly on
emission)
b. Astronomy-spectroscopy-2/3 (9:47): continuation of the series and speaks more on the
continuous spectrum; relates temperature to the spectra and the Balmer series
c. Astronomy-spectroscopy-3/3 (8:03): last part of the series; most related to astronomy;
speaks of Doppler Effect and red/blue shifts.
3) Diffraction and Interference Videos: 1vertasium channel
(http://en.wikipedia.org/wiki/Veritasium)
a. The Original Double Slit Experiment (7:40): Starts off with the host asking people on the
street – “What is Light?”; Young’s Double Slit Experiment with sunlight; interference
patterns created in water; debate over light as waves and particles – watch till the very end
– remind the students of the duality of light
b. How to Make Color with Holes (5:38): Light basics; combining of electric and magnetic
fields; butterfly wings and their structure of scales – like diffraction gratings; soap bubbles
4) Laser Videos: SmarterEveryDay channel (done by a Huntsville missile engineer and a Dutch laser
expert) Remind the students that these are professionals and they are using Class 4 lasers so a
standard laser pointer will not work. Also, remind students that laser training and safety is very
important.
a. How Lasers Work (in practice) – Smarter Every Day 33 (3:54): open cavity laser
b. Lasers vs. Balloons – Smarter Every Day 35 (4:28): Class 4 laser is shone on different
colored balloons (they all pop except the white one – the blue one does take longer); he
explains why
c. How to Light a Match Inside a Balloon – Smarter Every Day 36 (2:13): Lights a match inside
a white balloon with a Class 4 laser and the balloon does not pop.
5) Holograms:
a. How It’s Made: Holograms from the Discovery channel (EVAN199)(4:50): self-explanatory
Day 7:
1) Begin the PowerPoint on Diffraction and Optical Instruments. Point out the diffraction limit of
microscopes and how scientist use Fluorescence and Super-resolution Microscopes to “see” even
finer details of a specimen.
2) Pass out Microscope Internet Scavenger Hunt worksheet. Have students use computers or
SmartPhones to answer the questions. This can also be done for homework and the alternative
activity can be done. I have also included a list of Interactive Websites for Optics that can be used
in place of the Microscope Internet Scavenger Hunt, if other optics titles are more suited for a
particular class.
3) ALTERNATIVE ACTIVITY: STEAM (Science Technology Engineering Art and Mathematics) Thin-film
Interference Activity (based on
http://www.exo.net/~pauld/activities/light/interference/permanentoilslick.html
Day 8:
1) See Team Trivia: Interference and Diffraction for instructions and questions. There is also a
PowerPoint presentation if you have a SmartBoard with a clicker system.
Day 9:
Day 10:
National Standards:
Content Standard A: As a result of activities in grades 9-12, all students should develop:
o Abilities necessary to do scientific inquiry
o Understandings about scientific inquiry
Content Standard B: As a result of activities in grades 9-12, all students should develop an understanding of:
o Structure and properties of matter
o Interactions of energy and matter
Content Standard G: As a result of activities in grades 9-12, all students should develop an
understanding of:
o Science as a human endeavor
o Nature of scientific knowledge
d) Electricity and magnetism are two aspects of a single electromagnetic force. Moving electric charges produce
magnetic forces, and moving magnets produce electric forces. These effects help students to understand electric
motors and generators.
a) All energy can be considered to be either kinetic energy, which is the energy of motion; potential energy, which
depends on relative position; or energy contained by a field, such as electromagnetic waves.
b) Electromagnetic waves result when a charged object is accelerated or decelerated. Electromagnetic waves
include radio waves (the longest wavelength), microwaves, infrared radiation (radiant heat), visible light,
ultraviolet radiation, x-rays, and gamma rays. The energy of electromagnetic waves is carried in packets whose
magnitude is inversely proportional to the wavelength.
c) Each kind of atom or molecule can gain or lose energy only in particular discrete amounts and thus can absorb
and emit light only at wavelengths corresponding to these amounts. These wavelengths can be used to identify
the substance.
Background:
Interference:
When two waves with equal wavelengths cross paths, they will combine to form a resultant wave. The resultant wave
has the same wavelength as the two interacting waves, but its displacement at any point equals the algebraic sum of the
displacements of the component waves (superposition principle). The formation of the resultant wave is caused by the
interference of the two individual waves. Interference can be destructive or constructive depending on if the
displacements are in opposite or in the same directions.
Constructive interference is demonstrated when using monochromatic light (one wavelength/color), if the light waves
combine to form a resultant wave with amplitude that is larger than the individual waves. For light, the resultant wave
will be brighter than the two individual waves. In the case of destructive interference, the amplitude of the resultant
wave is less than that of the individual waves and will result in dimmer light or no light at all (complete destructive
interference).
For an interference pattern to be seen on a screen, the light waves reaching any point on the screen must have a phase
difference that does not change in time. These waves are said to have coherence (the property by which two waves
with the same wavelength will maintain a constant phase relationship). This is the reason that lasers (an instrument
that produces an intense, parallel beam of coherent light) are a great light source for this lab. The monochromatic light
passes through two very small and parallel slits. When the light from the two slits arrives at a point on a screen,
constructive or destructive interference will occur. As a result, either a bright or dark band (fringe) will appear on the
screen. See Figure 1.
When both waves of light move the same distance, they appear on the screen in phase and interfere constructively. The
waves will also interfere constructively (bright fringes) if the difference between the distances traveled by each light
source equals a whole wavelength. However, if the differences in the distances traveled by the light are equal to a half a
wavelength, destructive interference (dark fringes) will occur.
Fig. 1
Double Slit
interference
patterns
http://www.britannica.com/EBchecked/topic-art/340440/91986/Youngs-double-slit-experiment-When-monochromatic-
light-passing-through-two#tab=active~checked%2Citems~checked
Diffraction:
Diffraction refers to the behavior of waves bending around obstacles or that pass through small openings. Though light
waves are able to diffract like other waves, it can be difficult to observe due to their very small wavelengths [visible light
range: 700 nm (red) > > 400 nm (violet)]. If light were only a particle and did not diffract it would travel in straight
lines and an interference pattern would not be observed in the double-slit demonstration (See INTERFERENCE and FIG.
2). The bending of light as it passes through each of the two slits can be explained through Huygens ‘ Principle* (any
point on a wave front can be treated as a point source of waves). Since each slit serves as a point source of light, the
light waves spread out from the slits and depart from the straight-line path.
Diffraction patterns result from constructive and destructive interference and therefore resemble interference patterns.
However, in the case of interference the slits behave as point sources of light, whereas for diffraction, the actual width
of a single slit is taken into consideration. The amount the light that will bend is determined by the relative size of the
light’s wavelength compared to the size of the barrier or opening. If the opening is much greater than the light’s
wavelength, the bending will be almost undetectable. However, if the size difference is small, the amount of light that
will bend will be quite easy to view.
http://www.bottomlayer.com/bottom/reality/images/lightslitpossible.GIF
A diffraction grating is a device that uses the principles of diffraction and interference to separate light into its
component colors producing an effect comparable to that of a prism. Diffraction gratings can be constructed to either
transmit or reflect light. A transmission grating (light is able to pass through) is comprised of many equally spaced
parallel slits. Reflection gratings can both be plane or concave and reflect the incident light at different angles to
produce a diffraction pattern (the rainbow of colors that appear on the surface of a CD).
Fig. 3
http://hyperphysics.phy-astr.gsu.edu/hbase/phyopt/grating.html
The condition for the bright fringes is the same in the diffraction grating as that of the double-slit example.
However, angular separation of the bright fringes is usually much larger because the slit spacing is so small for
a diffraction grating. The greater the number of lines per unit of length in a grating, the smaller the distance
between the slits and the farther spread apart the individual wavelengths of light are.
The bright fringe formation is given by the equation for constructive
interference:
Let θ represent the angle of diffraction of the beam with respect to
the incident direction. Let d be the spacing between the two slits.
The path difference between the two waves starting from the two
θ slits, as in Fig. 4a and b. can be clearly shown to be d sin θ. For these
θ waves to constructively interfere the waves must arrive in phase;
d
clearly the path difference has to be an integral multiple of the
wavelength.
Fig 4a
d(sin) = m m = 0, ±1, ±2, … Eqn 1
d = distance between slits = angle of diffraction = wavelength of light
m = the order number for the bright fringes
Fig. 4 b
http://hyperphysics.phy-astr.gsu.edu/hbase/phyopt/grating.html
CDs and DVDs have a protective polycarbonate coating which does not interfere in the reflective diffraction grating, but
to create a transmission grating the metal layer must be removed and the physical diffraction grating retrieved. This is a
crucial step if AFM images are to be produced (See AFM). DVDs are usually two layered which are fairly easy to
separate. CDs are one layer and cannot be separated so other techniques must be applied. (See ADVANCED
PREPARATIONS)
To listen to a CD, the laser light in the CD player is reflected consecutively from the thread of binary bits etched on the
disc (alternating pits and smooth, reflecting surfaces).When the light reflects from the smooth surface it reaches the
detector. However, when the light reflects from the pits it is out of phase and the intensity of the beam hitting the
sensor is less (the depth for the pits is roughly about one quarter of the wavelength of the laser). Any change in the
intensity of the reflected beam as it transitions from a pit to land or land to pit is converted to an electrical signal and
coded as a binary 1. Electronic circuits connected to the detector translate the binary data into an electrical signal. The
signal is then amplified and results in a reconstruction of the original recorded sample. A DVD player works on the same
principle, but uses a smaller wavelength laser and therefore can detect information that is coded in much smaller pits
and smooth, reflecting surfaces. DVDs can hold more than seven times as much data as a CD.
Spectroscopy:
A spectroscope is a tool that is used to determine the composition of materials by breaking down the light
emitted or absorbed by chemical elements into particular lines of color (spectra). Light (electromagnetic
radiation) is created when an excited electron moves back to its lower energy level from a higher energy level.
The photon of light that is released has an energy that matches exactly to the difference in energy between
the two orbits. Every chemical element has its own unique “fingerprint” of these orbitals that can be used to
identify the chemical composition.
http://en.wikipedia.org/wiki/Spectrometer
Continuous Spectra:
Shows all the colors of the rainbow blended into one another in a band. They are usually produced by a
luminous liquid or solid. Ex) glowing filament of an incandescent bulb.
Absorption Spectra:
A dark line spectra which is identified by the black bands of missing color present in a continuous spectra.
They are generated when white light passes through a cooler gas located between the source of the
continuous spectrum and the observer. The cooler gas absorbs those wavelengths that it would usually emit if
it were the glowing source. It has the same spectral “fingerprint” that the cooler gas would if it were emitting
a bright line spectrum. Think of it like a photo-negative.
Emission Spectra:
Or Bright line emission spectra, whose source is a glowing gas. This gas emits photons with very specific
energies (frequencies or wavelengths) that are characteristic of the chemical element of which the gas is
composed of. Stars and tubes of heated gas can produce this emission spectra. A continuous emission
spectra is produced by the chemicals in hot, incandescent gas and displays bright bands of color on top of a
continuous spectra. You can see this spectra when looking at florescent lights. The white coating on the bulb
mixes the elemental lines of the gas inside the bulb to create the continuous spectra while the bright bands
are produced from the gas inside.
Images courtesy of
Mark Tiele Westra;
http://www.sciencei
nschool.org/2007/iss
ue4/spectrometer
Fig. 6
Hydrogen
Unlike a continuous spectrum source, which can have any energy it wants (all you have to do is change the
temperature), the electron clouds surrounding the nuclei of atoms can have only very specific energies
dictated by quantum mechanics. Each element on the periodic table has its own set of possible energy levels,
and with few exceptions the levels are distinct and identifiable.
Atoms will also tend to settle to the lowest energy level (ground state). This means that an excited atom in a
higher energy level must `dump' some energy. The way an atom `dumps' that energy is by emitting a wave of
light with that exact energy.
In the diagram following, a hydrogen atom drops from the 2nd energy level to the 1st, giving off a wave of
light with an energy equal to the difference of energy between levels 2 and 1. This energy corresponds to a
specific color, or wavelength of light -- and thus we see a bright line at that exact wavelength! ...an emission
spectrum is born, as shown below:
Fig. 9; An excited Hydrogen atom relaxes from level 2 to level 1, yielding a photon. This results in a bright emission line.
http://loke.as.arizona.edu/~ckulesa/camp/spectroscopy_intro.html
Tiny changes of energy in an atom generate photons with small energies and long wavelengths, such as radio
waves! Similarly, large changes of energy in an atom will mean that high-energy, short-wavelength photons
(UV, x-ray, gamma-rays) are emitted.
On the other hand, what would happen if we tried to reverse this process? That is, what would happen if we
fired this special photon back into a ground state atom? That's right, the atom could absorb that `specially-
energetic' photon and would become excited, jumping from the ground state to a higher energy level. If a star
with a `continuous' spectrum is shining upon an atom, the wavelengths corresponding to possible energy
transitions within that atom will be absorbed and therefore an observer will not see them. In this way, a dark-
line absorption spectrum is born, as shown below:
Fig. 10; A hydrogen atom in the ground state is excited by a photon of exactly the `right' energy needed to send it to level 2, absorbing
the photon in the process. This results in a dark absorption line. http://loke.as.arizona.edu/~ckulesa/camp/spectroscopy_intro.html
Most astronomers are not continuously looking through their large telescopes, because they are letting the
telescopes collect light for a spectrograph. Since each type of atom (or ion) has its own wavelength that it can
absorb or emit, they will produce a unique spectra. The temperature of a star varies, so the atoms in the
outer, cooler layers of the star absorb light emitted from the inner, hotter layers. This produces a dark
absorption line across the spectrum. This spectra is used to identify the make-up of atoms in a star. Unlike a
spectroscope used in school, astronomers do not take a color picture of the spectrum for the following
reasons:
Thus astronomers make graphs of their spectra, with the y-axis showing the brightness, while the x-axis shows the
wavelength. In the figure this graph is aligned just below the picture of the spectrum.
http://www.astro.ucla.edu/~wright/fluxplot
.html
Not only can astronomical spectroscopy be used to figure out a star’s chemical composition it can also determine
temperature, luminosity, density, distance, mass and relative motion using the Doppler Effect.
Gemology:
The way that transparent, colored gemstones absorb the visible light that passes through them is what
determines their color. The color observed is directly related to the stones chemical make-up, spectroscopy is
a very effective method for determining the chemistry of the gemstones.
http://www.suncoastgemlab.com/blog/201
3/01/gem-notes-gemological-spectroscopy/
Chemistry (also Physics and Biology):
Research scientists use spectroscopy often regardless of their field. The spectra can be used to identify the
composition of the sample and the amounts of the chemicals in the sample, but other information can also be
obtained. For example, information about atomic and molecular energy levels, chemical bonds, interactions
of molecules and the shapes of the molecules can also be determined. Usually the spectrum is a plot of the
intensity of the energies versus the wavelength, frequency, mass, momentum, etc. of the energy.
Types of Spectroscopy:
There are many types of spectroscopy used, but I just chose a few to discuss. The site:
http://chemistry.about.com/od/analyticalchemistry/a/spectroscopy.htm is a good place to start to learn
about other types. It would be a good extension to this unit to have the students report on the different
types of spectroscopy and could replace the Unit Project if desired. Spectroscopy is used so much in
research it is really an important topic.
Different compounds can be differentiated by their color. For example, chlorophyll is green and quinone is
yellow. In this respect our eyes act as a spectrometer that detects and analyzes the light reflect from an
opaque object or transmitted through a transparent one. To understand why some compounds have color
and others do not, precise measurements of light absorption at various wavelengths in and near the visible
part of the electromagnetic spectrum are required.
The visible region of the spectrum comprises photon energies of 36 to 72 kcal/mole, and the near ultraviolet
region, out to 200 nm, extends this energy range to 143 kcal/mole. This is enough energy to excite a
molecular electron to a higher energy orbital. Usually, energetically favored electron promotion will be from
the highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO), and the
resulting species is called an excited state. When sample molecules are exposed to light having an energy that
matches a possible electronic transition within the molecule, some of the light energy will be absorbed as the
electron is promoted to a higher energy orbital. An optical spectrometer records the wavelengths at which
absorption occurs, together with the degree of absorption at each wavelength. The resulting spectrum is
A mass spectrometer converts individual molecules to ions so an external electric/magnetic field can
manipulate them and the characteristics of the molecules can be determined. The three main parts of a mass
spectrometer are:
IR (Infrared):
Photon energies associated with this part of the electromagnetic spectrum are not great enough to excite electrons, but
may induce vibrational excitation of covalently bonded atoms and groups. The covalent bonds in molecules are not rigid
sticks or rods, such as found in molecular model kits, but are more like stiff springs that can be stretched and bent.
Molecules experience a large variety of vibrational motions, characteristic of their component atoms. Consequently,
virtually all organic compounds will absorb infrared radiation that corresponds in energy to these vibrations. This allows
researchers to obtain absorption spectra of compounds that are a unique reflection of their molecular structure.
One influence of the intensity of infrared absorptions, is that a change in dipole moment should occur for a
vibration to absorb infrared light. Absorption bands associated with C=O bond stretching are usually very
strong because a large change in the dipole takes place in that mode.
Some General Trends:
a) Stretching frequencies are higher than corresponding bending frequencies. (It is easier to bend a bond
than to stretch or compress it.)
b) Bonds to hydrogen have higher stretching frequencies than those to heavier atoms.
c) Triple bonds have higher stretching frequencies than corresponding double bonds, which in turn have
higher frequencies than single bonds.
(Except for bonds to hydrogen).
Raman Spectroscopy:
Raman Spectroscopy: a technique used to detect vibrational, rotational and other low frequency
modes in a sample. When electromagnetic radiation is scattered by a molecule, the incident photon is
destroyed and, at the same time, another photon of the scattered radiation is created. The scattering
mechanisms are grouped based on the difference between the energies of the incident and scattered
photons. If the incident energy equals the scattered this is referred to as Rayleigh scattering (most
types of scattering). However if the incident is different than the scattered energy (inelastic scattering
– KE is not conserved) then it is known as Raman scattering.
The photon is the incident particle and interacts with matter and the frequency of the photon is shifted
to red (energy of photon decreases) or blue (energy of photon increases). The molecular bonds and
chemical make-up determine the Raman shift and spectra.
The Raman Effect occurs when light is incident on a molecule and interacts with the electron cloud and
the bonds of the molecule. A photon excites the electron in the molecule from the ground state to a
virtual energy state. As the molecule relaxes a photon is emitted and the electron returns to a
different vibrational state. The change in energy from the initial state and the new state leads to a
shift in the emitted photon’s frequency.
If the final state is more energetic than the original, then the emitted photon will be shifted to a lower
frequency to balance out the total energy of the system (Stokes shift). If the final state is less
energetic, then the emitted photon will be shifted to a higher frequency (anti-Stokes shift). Some
amount of deformation of the electron cloud is required for a molecule to exhibit a Raman effect.
http://www.fis.unipr.it/phevix/raman_tutor
ial.html
A laser (Light Amplification by Stimulated Emission of Radiation) is an instrument that converts light, electrical
or chemical energy into coherent light. Coherence means that the light waves interfere constructively causing
them to have become in phase with one another (in-step). This increases the amplitude and therefore the
energy of the laser.
There are many types of lasers but they all use an active medium to which energy is added to produce
coherent light. The active medium can be solid, liquid, or gas. The composition of the active medium
determines the wavelength, or color, of the light produced by the laser.
The following explanation and images (Fig. 18 a-d) are from the National Ignition Facility (NIF) a part of the
National Nuclear Security Administration. < https://lasers.llnl.gov/education/how_lasers_work.php>
a) High-voltage electricity causes the quartz flash tube to emit an intense
burst of light, exciting some of the atoms in the ruby crystal to higher energy levels.
c) Mirrors at each end reflect the photons back and forth, continuing this
process of stimulated emission and amplification.
d) The photons leave through the partially silvered mirror at one end.
This is laser light.
The laser flash that escapes through the partially reflecting mirror lasts for only about 300 millionths of a
second, but is very intense. Early lasers could produce peak powers of some 10,000 watts. Modern lasers can
produce pulses that are billions of times more powerful.
The 1,000-watt light used in modern lighthouses can be seen from 20 miles away. But beyond that distance,
the light beam has spread out so much that it is difficult to see. A laser beam, however, will run straight and
true for very long distances. A laser beam has been bounced off the moon to accurately measure the distance
of more than 250,000 miles! The beam stays roughly the same size as it travels this vast distance. Coherence
means that laser light can be focused with great precision.
Many different materials can be used as lasers. Some, like the ruby laser, emit short pulses of laser light.
Others, like helium–neon gas lasers or liquid dye lasers, emit a continuous beam of light. The NIF lasers, like
the ruby laser, are solid-state, pulsed lasers.
Lasers have many important applications. They are used in common consumer devices such as DVD players,
laser printers, and barcode scanners. They are used in medicine for laser surgery and various skin treatments,
and in industry for cutting and welding materials. They are used in military and law enforcement devices for
marking targets and measuring range and speed. Laser lighting displays use laser light as an entertainment
medium. Lasers also have many important applications in scientific research.
Holograms:
Holography is a technique that creates three-dimensional images. Interference and diffraction principles are
used along with lasers, light intensity recording and suitable lighting of the recorded image to create a
hologram. The image changes appearance as the position/orientation of the viewing system changes in the
same way as if the object were still there (why the image appears 3-D).
Holography allows a light field, which is generally the product of a light source scattered off objects, to be
recorded and later reconstructed when the original light field is no longer present, (the original object is
absent). A good analogy is to think of holography like a sound recording. The sound field is created by
vibrating objects (musical instruments or vocal cords) that is encoded in such a way that it can be reproduced
later, without the original vibrating objects. The holographic recording itself is not an image; it consists of an
apparently random structure of either varying intensity, density or profile.
When the hologram plate is illuminated by a laser beam identical to the reference beam which was used to
record the hologram, an exact reconstruction of the original object wave front is obtained. An imaging system
(an eye or a camera) located in the reconstructed beam 'sees' exactly the same scene as it would have done
when viewing the original. When the lens is moved, the image changes in the same way as it would have done
when the object was in place. A holographic image can also be obtained using a different laser beam
configuration to the original recording object beam, but the reconstructed image will not match the original
exactly. When a laser is used to reconstruct the hologram, the image is speckled just as the original image
would have been. This can be a major drawback in viewing a hologram.
White light consists of light of a wide range of wavelengths. Normally, if a hologram is illuminated by a white
light source, each wavelength can be considered to generate its own holographic reconstruction, and these
will vary in size, angle, and distance. These will be superimposed, and the summed image will wipe out any
information about the original scene, just as if you superimposed a set of photographs of the same object of
different sizes and orientations. However, a holographic image can be obtained using white light in specific
circumstances, e.g. with volume holograms and rainbow holograms. The white light source used to view these
holograms should always approximate to a point source, i.e. a spot light or the sun. An extended source (e.g. a
fluorescent lamp) will not reconstruct a hologram since its light is incident at each point at a wide range of
angles, giving multiple reconstructions which will "wipe" one another out.
Fig. 20 a and b; a) on the left demonstrates the divisible properties of a hologram and b) on the right
shows the basic setup for a transmission hologram. http://science.howstuffworks.com/hologram.htm
Transmission:
These can be found on credit cards and money. They are called transmission because they should be lit from
behind (like a slide in a slide projector). It can be difficult to light the hologram in this manner so a mirror or a
foil backs the hologram. This is why the credit card hologram has a silvery appearance. The light can bounce
off the mirrored backing and basically light the hologram from behind.
A rainbow hologram is a special type of transmission hologram as the light being used to illuminate them is
split into a spectrum, the hologram representing the 'correct' color(s) from one angle, while at other angles
seen in different colors of the spectrum (from deep blue to red). Transmission rainbow holograms can be large
(>1m2) or small (<10mm2 ), can be made singularly, or mass-reproduced using a technique known as
embossing. Embossed holograms are the ones usually seen on credit cards and packaging. The original
hologram is made into a metal copy and duplicates are used to create millions of copies by embossing the
pattern into soft aluminized plastic. This the most common form of holography because it can be made in
great quantities quickly and cheaply.
http://www.holomall.com/Hologram%20Pictures.htm
Reflection:
For this type of hologram the object and reference beams are incident on the plate from opposite sides of the plate. The
reconstructed object is then viewed from the same side of the plate as that at which the re-constructing beam is
incident. With a reflection holography, the image is stored in a thick emulsion and can be viewed in white light. The
simplest such hologram to make is the direct beam reflection hologram. In this case the direct beam through the film
serves as the reference beam.
http://hyperphysics.phy-astr.gsu.edu/hbase/optmod/holog3.html
http://digilander.libero.it/crispers/hologram
s.html
Pulsed:
A moving object can be made to appear to be at rest when a hologram is produced with the extremely rapid and high-
intensity flash of a pulsed ruby laser. The duration of such a pulse can be less than 1/10,000,000 of a second; and, as
long as the object does not move more than 1/10 of a wavelength of light during this short time interval, a usable
hologram can be obtained. A continuous-wave laser produces a much less intense beam, requiring long exposures; thus
it is not suitable when even the slightest motion is present.
http://www.holograms.bc.ca/home6b1.htm
At the 2006 Grammy Awards the Pepper's ghost technique was used to project Madonna with the virtual
members of the band Gorillaz onto the stage in a "live" performance. This type of system consists of a
projector (usually DLP) or LED screen, with a very high resolution (1280x1024 or higher) and very high
brightness (at least 5,000 lumens), a high-definition video player, a stretched film between the audience and
the acting area, a 3D set/drawing that encloses three sides, plus lighting, audio, and show control.[13]
During Dr. Dre and Snoop Dogg's performance at the 2012 Coachella Valley Music and Arts Festival, a
projection of deceased rapper Tupac Shakur appeared and performed "Hail Mary" and "2 of Amerikaz Most
Wanted".[14][15]
http://gizmodo.com/590309
2/this-is-how-tupacs-
hologram-that-wasnt-really-
a-hologram-worked
Microscopy:
History and Introduction to Basic Microscopy:
Though it has been known for over 2000 years that glass refracts light it was not until the first century that the Romans
started doing actual experiments with glass. The Romans tested different shapes of glass and one shape was thin on the
edges and thick in the center and when placed over an object it would appear larger. These primitive lenses were called
magnifiers or burning glasses. The actual word lens came from the Latin term lentil, due to the shape of the lens looking
like a lentil bean. However, lenses were not in wide use until the end of the 13th century where they were made into
glasses for better vision. Then around 1590, a father and son spectacle maker team (Hans and Zaccharias Janssen),
started experimenting with lenses and combining them to find that there was increased magnification. These first
microscopes were fairly weak (6x – 10x power) and used more for amusement than for any scientific study.
Finally in the late 17th century, Antony Van Leeuwenhoek, created the first practical microscope. He was able to create a
lens with a magnification of 270 xs by grinding and polishing small glass balls. With this microscope he was able to see
things that no one ever had seen before (bacteria, yeast, blood cells, etc.). This led to the thought that life might be
made of smaller components that cannot be seen by the unaided eye. The problem was that to increase the power of a
single-lens microscope, you would need to make the focal length smaller. This reduction requires that the lens
diameter also be reduced which eventually becomes too hard to see through.
To go around the above conundrum, the compound microscope was created (still in the 17th century). This system
utilizes more than one lens so that the image of one lens can be magnified further with another lens. The two main
lenses are the eyepiece (lens closer to the eye) and the objective (lens closer to object). It is important to note that
what is seen in a compound microscope is not a tangible object but an imaged formed from the combination of lenses.
The goal of any microscope is to improve resolution. Resolution is the ability of an optical instrument is to resolve detail
in the object that is being imaged. It is determined by wavelength of light and aperture width. The microscope’s role is
to increase the view of the object so details can be observed that are not possible with the unaided eye. Because of the
increased size of the image, resolution is often mistaken for magnification. It is generally the case that a larger
magnification leads to greater resolution, but this is not always true. The resolution of an optical instrument can be
limited by factors such as flaws in the lenses or misalignment. However, there is a max to the resolution of any optical
instrument due to diffraction.
Fig. 26 a; (left) Demonstrates how aperture size and wavelength affect the diffraction of light.
http://www.imagen-estilo.com/Articles/Photography-basics/lens-diffraction-limit.html
http://www.visioneng.com/re
sources/history-of-the-
microscope#
The second problem was spherical aberration. This creates a blurry image due to the light rays not converging/diverging
in the same place. This was resolved by Joseph Jackson Lister (~1830) by placing lenses particular distances from one
another that would eliminate the aberration from all but the first lens. Also, it was found that if the first lens was a low
power, low curvature lens the aberration problem was practically non-existent.
The third issue is that for a microscope to work optimally a large amount of light must be collected. This problem was
worked out by Ernst Abbe (1870’s) by determining the physical laws that control how the objective collects light and
enhanced this by using water and oil immersion lenses. This provided Abbe with a resolution 10 xs greater than
Leeuwenhoek. The resolution is about 200 nm which cannot be improved with an optical microscope due to the
physical limitations of light’s wavelength.
Diffraction Limits:
The physical limits of light’s wavelength cause resolution restrictions that are often referred to as the diffraction limit.
This limit does not allow for an optical instrument to differentiate between two objects that have a separation distance
that is about half the wavelength of light used on the specimen. Airy diffraction patterns are generated by light from
two points passing through a circular aperture, such as the pupil of the eye. Points far apart (top) or meeting the
Rayleigh criterion (middle) can be distinguished. Points closer than the Rayleigh criterion (bottom) are difficult to
distinguish.
http://en.wikipedia.org/wiki/Angular_resolution
Resolving Power:
The resolving power is the ability of an optical device to produce separate images of close specimens. The resolving
power is greater with smaller wavelengths of light. There are a variety of microscope have different resolving
powers. Light microscopes allow objects as small as a bacterium to be discerned. However, other
microscopes such as Fluorescence, Super-resolution and Electron microscopes have much higher resolving
power – the most powerful allow us to distinguish individual atoms.
The equation for resolving power is sin θ = 1.22/d. θ = angular resolution, d = diameter of the lens’
aperture, = wavelength of light.
Fig. 29; resolving power of
microscopes
http://www.sciencelearn.org.nz/
Contexts/Exploring-with-
Microscopes/Sci-
Media/Images/Resolving-power-
of-microscopes
Fluorescence Microscopy:
The absorption and successive re-radiation of light by particular specimens is usually due to fluorescence or
phosphorescence. The major distinction between these two processes is the time it takes the emitted light to decay.
For fluorescence it is quite fast (milliseconds), whereas phosphorescence is slower and can take minutes up to
hours to decay. The reason for the difference in decay time is due to the electron processes used.
In 1852, Sir George G. Stokes described fluorescence and coined the term when he noticed that the mineral
fluorspar emitted red light when it was illuminated by UV light. He also observed that the fluorescence emission
always happened at higher wavelengths than that of the excitation light. Throughout the 1800’s studies were done
on many different types of specimens that were shown to fluoresce when the objects had ultraviolet light shone
upon them (ex: minerals, resins, crystals, chlorophyll, vitamins, etc.). Eventually in the 1930’s scientist started to
use fluorochromes to stain different specimens such as bacterium and portions of tissues. Often these stains were
very specific to the particular light re-emitted.
Fluorescence microscopy has become an important tool in biological, medical and material sciences because of the
characteristics that are not seen in traditional optical microscopes. Using fluorochromes allows for the identification
of cells and cellular components with a great degree of specificity among the non-fluorescing material. Though
fluorescence microscopy cannot resolve below the diffraction limit, the fluorescing molecules below this limit are
readily detected. Some specimens show autofluorescence (without fluorochromes) but others must be stained with
fluorochromes. These stains attach themselves to particular structures of the specimen which are excited by certain
wavelengths of irradiating light and emitted light of specific intensities. One issue though with this technique is
photobleaching. This is the fading of the fluorescent stain due to the exposure to light.
Fig. 30; Issues of fluorescence microscopy
http://www.microscopyu.com/articles/fluor
escence/fluorescenceintro.html
Super-resolution Microscopy:
Though fluorescence microscopy provided certain advantages over traditional optical microscopy it is still burden with
the diffraction limit of light and therefore can only collect so much information from standard objectives. Recently,
there has been innovative approaches to by-pass the diffraction limit. These processes include near-field scanning
optical microscopy (NSOM), structured illumination microscopy (SIM), stimulated emission depletion microscopy (STED)
and reconstruction microscopy (STORM). Though these procedures have vastly improved the lateral (x-y) resolution
down to tens of nanometers they each have their own limitations. These are only a few of the different types of super-
resolution microscopes.
NSOM
Near-field scanning microscopy can produce super-resolution images by using the unique traits of evanescent waves and
can create a resolution that is only limited by the physical size of the aperture (smaller than 20 nm). The refractive
index, chemical structure, and fluorescence emission properties all contribute to the contrast.
SIM
Structured illumination (fluorescence) is a process that uses the moire’ effect to gain finer spatial frequencies produced
by light emissions from the specimen. These frequencies are produced from Fourier transforms by overlapping two
different spatial frequencies from multiple directions. Software extracts the higher spatial frequency information from
the specimen’s produced moire’ pattern. This results in a lateral resolution of about 100 nm and an axial (z) resolution
close to 300 nm.
STED
Stimulated emission depletion microscopy uses high-intensity pulsed lasers that have unique modulation filters that
control the excitation beam geometry. Though a lateral resolution of about 10 nm can be achieved these probes can
possibly damage the specimen and require resistant photobleaching fluorescents. Also, the configurations of the
microscope are very complex to assemble.
STORM
Stochastic optical reconstruction microscopy is based on the stochastic and sequential readout that has an exact
localization of many single molecules from a specimen that were labeled with photoswitchable dyes with similar
densities used in widefield and confocal fluorescence microscopy. An activation laser is used to cause emission
switching so that any certain molecule has a small chance of being photoactivated, but most of the specimen remains in
the dark emissive stage.
http://zeiss-campus.magnet.fsu.edu/articles/superresolution/introduction.html
References:
Books and Interviews:
• Serway, Raymond A., and Jerry S. Faughn. Holt Physics. Austin, Texas: Holt, Rinehart and Winston, 2000.
• Deeson, Eric.(2007). Collins Internet-Linked Dictionary of Physics. London: HarperCollins Publishers Ltd.
• Porter-Davis, Karen. Interview with Dr. Thomas Orlando. Department of Chemistry. Georgia Institute of
Technology. Atlanta, Georgia. Summer 2013.
• Porter-Davis, Karen. Continuous interview with Giovanni DeLuca. Department of Chemistry. Georgia Institute of
Technology. Atlanta, Georgia. Summer 2013.
• Porter-Davis, Karen. Interview with Dr. Jennifer Curtis. Department of Physics. Georgia Institute of Technology.
Atlanta, Georgia. Summer 2014.
• Porter-Davis, Karen. Continuous interview with Dan Kovari. Department of Physics. Georgia Institute of
Technology. Atlanta, Georgia. Summer 2014.
Websites:
• “Gem Notes: Gemological Spectroscopy”. Colored Gemstones. Suncoast Gem Lab. 23 Jan 2013.Web. 9 July 2013.
< http://www.suncoastgemlab.com/blog/2013/01/gem-notes-gemological-spectroscopy/>
• “History of the Microscope”. Vision Engineering. n.p.n.d. pg. 1-7. Web. 16 July 2014. <
http://www.visioneng.com/resources/history-of-the-microscope#>
• "Holography." Encyclopædia Britannica. Encyclopædia Britannica Online. Encyclopædia Britannica Inc., 2013.
Web. 09 Jul. 2013. <http://www.britannica.com/EBchecked/topic/269607/holography>.
• “Holography”, Wikipedia Wikimedia Foundation, Inc.27 June 2013Web. 2 July 2013. <
http://en.wikipedia.org/wiki/Holography>
• “How Lasers Work”, National Ignition Facility. National Nuclear Security Administration. Lawrence Livermore
National Laboratory. Web. 2 July 2013. < https://lasers.llnl.gov/education/how_lasers_work.php>
• “Introduction to Spectroscopy”, NASA’s Imagine the Universe; High Energy Astrophysics Science Archive
Research Center. 05 Sep 2006. Web. 02 July 2013.
http://imagine.gsfc.nasa.gov/docs/teachers/lessons/xray_spectra/background-spectroscopy.html
• “Introduction to Super resolution Microscopy”. Education in Microscopy and Digital Imaging. Carl Zeiss and
Molecular Expressions. Web. 06 June 2014 http://zeiss-
campus.magnet.fsu.edu/articles/superresolution/introduction.html
• Kulesa, Craig. “What is Spectroscopy”, Arizona State University. 4 Feb 1997. Web. 3 July 2013.
< http://loke.as.arizona.edu/~ckulesa/camp/spectroscopy_intro.html>
• “Laser”, Wikipedia Wikimedia Foundation, Inc.2 July 2013Web. 2 July 2013. <
http://en.wikipedia.org/wiki/Laser>
• “Raman Spectroscopy” Wikipedia Wikimedia Foundation, Inc.23 June 2013Web. 2 July 2013.
<http://en.wikipedia.org/wiki/Raman_spectroscopy>
• “Raman Spectroscopy: Tutorial”, Laboratory of Photo-induced Effects Vibrational and X-ray
Spectroscopies. Physics Department, University of Parma. 2007 Web. 2 July 2013.
http://www.fis.unipr.it/phevix/raman_tutorial.html
• “Reflection Holograms”. HyperPhysics. Department of Physics and Astronomy: Georgia State University.
2012.Web. 9 July 2013. < http://hyperphysics.phy-astr.gsu.edu/hbase/optmod/holog3.html>
• Reusch, William. “Infrared Spectroscopy”, Department of Chemistry: Michigan State University. 5 May 2013.
Web. 9 July 2013.
<http://www2.chemistry.msu.edu/faculty/reusch/VirtTxtJml/Spectrpy/InfraRed/infrared.htm#ir1>
• Silfies, Joel S.; Schwartz, Stanley A.; Davidson, Michael W. “The Diffraction Barrier in Optical Microscopy”,
Microscopy U: Nikon. Copyright 2000-2013. Web. 16 July 2014.
http://www.microscopyu.com/articles/superresolution/diffractionbarrier.html
• Silfies, Joel S.; Schwartz, Stanley A.; Martini, Sunita; Price, Stephen P., Coker, Alex B.; Davidson, Michael W.
“Fundamental Concepts in Super-resolution Microscopy”, Microscopy U: Nikon. Copyright 2000-2013. Web. 16
July 2014. http://www.microscopyu.com/articles/superresolution/index.html
• Smith, Steven W. Ph.D. The Scientist and Engineer's Guide to Digital Signal Processing © 1997-2011 by California
Technical Publishing. Web. 06 June 2014. http://www.dspguide.com/copyrite.htm
• Spring, Kenneth R.; Davidson, Michael W. “Introduction Fluorescence Microscopy ”, Microscopy U: Nikon.
Copyright 2000-2013. Web. 16 July 2014.
http://www.microscopyu.com/articles/fluorescence/fluorescenceintro.html
• Wright, Edward L. “Spectroscopy and Astronomy”, UCLA. 28 Aug 1999. Web. 9 July 2013.
<http://www.astro.ucla.edu/~wright/fluxplot.html>
INTERFERENCE AND DIFFRACTION
DEMONSTRATIONS
Diffraction Grating Demonstration:
Take the red laser pointer and shine it through a diffraction grating on the wall/white board in a darken room.
Have the students attempt to explain what is occurring with the laser light. Have a student come up to the
wall and point out the central bright fringe. Have them mark off the bright fringes with a marker (or if on a
wall you can have them use red stickers – like Avery color coding labels). Then bring out the green laser and
ask the students to predict how the green laser will diffract compared to the red laser (remind them about the
wavelength size difference between red and green). Repeat the previous procedure with the green laser and
have the student mark off the bright fringes (make sure you are pointing it in the same direction at the same
level. After they are marked off turn on the lights and compare and discuss how the diffraction of light differs
depending on wavelength.
Spectroscope Demonstration:
Pass out diffraction gratings and spectroscopes to each student or pairs of students. REMIND THE STUDENTS
NOT TO TOUCH THE GRATING PART OF THE SLIDE. If you do not have any spectroscopes the diffraction
gratings will do. As a class have the students look through the diffraction gratings and spectroscopes at
different light sources (NOT THE SUN). It is best if you have several different sources like an emission box with
neon, hydrogen and helium gas, but also incandescent, halogen and fluorescent sources. Open up a
discussion of what students are seeing and if the sources of light all look the same and why they look different.
Also, if you are using both diffraction gratings and spectroscopes have the students explain the similarities and
differences (both split the light into a spectrum, but a spectroscope usually will provide a scale to measure the
wavelength of the bands – also since spectroscopes have the grating enclosed it can be easier to see the
spectra). If you are just using diffraction gratings, below are tips on how to help the students see the spectra.
1. Does interference of light only occur with visible light? If not, give an
example.
2. Explain why light has a dual nature. Use examples to support your answer.
4. Define coherence.
8. Which object would produce the most distinct diffraction pattern: your
textbook, your house key or a strand of your hair? Explain why.
9. Would red or green light produce a wider diffraction patter? Explain why.
10. What does the acronym, laser, mean? How does a laser differ from
incandescent light (name at least three ways)? Name two uses for lasers.
INTRODUCTION TO THE INTERFERENCE AND
DIFFRACTION OF LIGHT WORKSHEET
Teacher copy
Name: ______________________________ Date: ______________ Period: _______
1. Does interference of light only occur with visible light? If not, give an
example.
No, interference can occur with all electromagnetic waves. One common
example is with radio waves (affects cell phones, radios, television, etc.). X-rays
are also good examples.
2. Explain why light has a dual nature. Use examples to support your answer.
This means that light can act as a wave but also as a particle (photon). The way
light diffracts demonstrates wave characteristics (Huygens, Fresnel or Young’s
experiments), but the photo electric effect (other ex: Compton’s or J.J.
Thomsons’ experiment can also be used) demonstrated how light can act as a
particle as well.
For constructive interference the light waves will combine and produce bright
fringes and with destructive interference the light waves will cancel (or reduce)
to produce dark/dim fringes.
4. Define coherence.
The property by which two waves with identical wavelengths maintain a constant
phase relationship. (Holt Physics book definition)
The angle between the resolved objects should be as small as possible. The
shorter the wavelength of the incident light or the wider the aperture (opening
through which light passes) the smaller the angle of resolution and the greater
the resolving power will be. The limiting angle of resolution in radians for an
optical instrument with a circular aperture is = 1.22 /D
8. Which object would produce the most distinct diffraction pattern: your
textbook, your house key or a strand of your hair? Explain why.
Your strand of hair. Its size is nearest the size of the wavelength of visible light.
9. Would red or green light produce a wider diffraction patter? Explain why.
10. What does the acronym, laser, mean? How does a laser differ from
incandescent light (name at least three ways)? Name two uses for lasers.
2. If the distance between two slits is 3.33 E – 3 mm, determine the angle between the first-order and
second-order bright fringes for the yellow spectra of a sodium lamp with a wavelength of 589 nm.
3. A pair of narrow parallel slits are illuminated by the blue component of a mercury vapor lamp with a
wavelength of 435.8 nm. The angle from the central maximum to the first bright fringe is 16.2°.
Determine the distance between the slits.
4. The distance between slits in a double-slit interference experiment is 0.055 mm. The second-order
bright fringe is measured to have an angle of 3.45° from the central maximum. Calculate the
wavelength of the light source.
5. Light with a wavelength of 574 nm falls on a double slit interference experiment (d = 2.5 mm).
Calculate the angle between the central maximum and the second dark fringe.
a. 300,000 lines/m
b. 2150 lines/cm
c. 428 lines/mm
7. Light from a Krypton laser ( = 416 nm) shines on a diffraction grating with 175,000 lines/m. Solve for
the angle between the central maximum and the first-order maximum.
8. A grating with 1525 lines/cm is illuminated with light of wavelength 632.8 nm. What is the angle
between the central maximum and the second-order maximum?
9. A diffraction grating has blue light with a wavelength of 475 nm shone on it. An angle of 11° is
determined between the central maximum and first-order maximum. What is the distance between the
slits?
10. Light from a Nitrogen laser ( = 337.1 nm) shines on the surface of a diffraction grating that has 525
lines/mm. Determine the angles at which you would observe the first and second order maxima.
INTERFERENCE AND DIFFRACTION PROBLEMS
TEACHER’S COPY
6.327 E -7 m or 632.7 nm
2. If the distance between two slits is 3.33 E – 3 mm, determine the angle between the first-order and
second-order bright fringes for the yellow spectra of a sodium lamp with a wavelength of 589 nm.
Convert: 3.33 E – 3 mm 3.33 E – 6 m and 589 nm 589 E -9 m or 5.89 E -7 m
10.19°
20.72°
3. A pair of narrow parallel slits are illuminated by the blue component of a mercury vapor lamp with a
wavelength of 435.8 nm. The angle from the central maximum to the first bright fringe is 16.2°.
Determine the distance between the slits.
Convert: 435.8 nm 435.8 E -9 m or 4.358 E -7 m
4. The distance between slits in a double-slit interference experiment is 0.055 mm. The second-order
bright fringe is measured to have an angle of 0.75° from the central maximum. Calculate the
wavelength of the light source.
Convert: 0.055 mm 5.5 E – 5 m
359.96 E -7 m
5. Light with a wavelength of 574 nm falls on a double slit interference experiment (d = 0.25 mm).
Calculate the angle between the central maximum and the second dark fringe.
Remember the 2nd dark fringe is between the 1st and 2nd bright fringe so m = 1
d(sin) = (m + ½) m = 0, ±1, ±2,… = sin-1([(m + ½)]/d) = sin-1([(1 + ½)(574 E -9)]/(2.5 E -4))
0.197°
4.18°
8. A grating with 1525 lines/cm is illuminated with light of wavelength 632.8 nm. What is the angle
between the central maximum and the second-order maximum?
Convert: 1525 lines/cm 6.56 E –4 cm 6.56 E -6 m and 632.8 nm 632.8 E -9 m or 6.328 E -7 m
11.12°
9. A diffraction grating has blue light with a wavelength of 475 nm shone on it. An angle of 11° is
determined between the central maximum and first-order maximum. What is the distance between the
slits?
Convert: 475 nm 475 E -9 m or 4.75 E -7 m
10. Light from a Nitrogen laser ( = 337.1 nm) shines on the surface of a diffraction grating that has 525
lines/mm. Determine the angle at which you would observe at the second order maximum.
Convert: 337.1 nm 337.1 E -9 m or 3.371 E -7 m and 525 lines/mm 1.905 E -3 mm 1.905 E -6 m
20.73°
DIFFRACTION GRATING LAB
MATERIALS:
Diffraction gratings, a CD/DVD with aluminum coating removed, laser pointer, ring-stand with clamp, and
white screen (or poster board)
PROCEDURE:
Use the information on the diffraction gratings to compare the calculated angle of diffraction with the
measured one (first order maximum). Use a CD/DVD as a diffraction grating and determine the distance
between the grooves.
DATA:
Wavelength of laser (): _________________ m
DIFFRACTION EQUATIONS
dsincalc. = m and y = Ltanobser.
y m=1
d = distance between slits
d
Central bright fringe
= path angle
y
m = order number m=1
= wavelength of light L
100 lines/mm
300 lines/mm
530 lines/mm
600 lines/mm
(meters) (meters)
Fig1a. AFM image : Sample : Memorex CD 750 MB; 2a. AFM image Sample : Sony DVD-R 4.7 GB;
blank; scan size 10 micrometer Blank, scan size 5.0 micrometer
MICROSCOPE INTERNET
SCAVENGER HUNT
1. What is a main concern in optical microscope resolution? Explain.
3. What are airy disks? How do they change with wavelength and aperture size? Whom
were they named after?
4. How many lenses are used in an optical compound microscope? What are they? What
type of lenses are they, convex or concave?
The Diffraction Resolution Limit. This resolution is defined as the shortest distance between
two points on a specimen that can still be distinguished by the observer or camera system as
separate entities.
Generally accepted criterion for the minimum resolvable detail – the imaging process is said
to be diffraction-limited when the first diffraction min of the image of one source point
coincides with the max of another.
3. What are airy disks? How do they change with wavelength and aperture size? Whom
were they named after?
The bright central spot of the pattern produced by light diffracted when passing through a
small circular aperture. As wavelength decreases the airy disks decreases; As the aperture
decreases the airy disks increase; British Astronomer: George Biddell Airy
4. How many lenses are used in an optical compound microscope? What are they? What
type of lenses are they, convex or concave?
Three to four main lenses: eyepiece, condenser, objective (projector lens); convex lenses
b) Divisions for each section (three sections: Interference, Diffraction and Lasers) in
the unit.
d) All Flash Charts should be typed (only exception – the calculations) and placed on
colored paper (no notebook paper). Posters can be designed on poster board or
through the website http://edu.glogster.com . Content quality, readability
(organization), neatness and creativity will all be considered.
FLASH CHART RUBRIC
Name: ___________________________ Date: _____________ Period: _____
0 2 3 5
TITLE OF No Title Non- Appropriate Appropriate
CHAPTER/TOPIC Relevant Title Given Title Given
Title with
Grammatical
Errors
0-3 4-6 8 10
SYNOPSIS OF Requirement Unorganized Clear, Clear,
CHAPTER/TOPIC not with/without Concise Concise
Met/Very Grammatical Synopsis Synopsis
Unorganized Errors with a few with no
with Grammatical Grammatical
Grammatical Errors Errors
Errors
0-6 8 - 12 14 -18 20
SECTION Requirement 50 – 74% of At least 75 All Section
OBJECTIVES not Met/Less Section % of Section Objectives
than 50% of Objectives Objectives Answered
Section Answered Answered Correctly
Objectives Correctly Correctly
Answered
Correctly
0-3 4-6 7-9 10
IMPORTANT Requirement 50 – 74% of At least 75 All Terms
TERMS not Met/Less Terms % Terms Defined
than 50% of Defined Defined Correctly
Terms Correctly Correctly
Defined
Correctly
0-3 4-6 7-9 10
EQUATIONS Requirement 50 – 74% of At least 75 All
not Met/Less Equations % Equations Equations
than 50% of Defined Defined Defined
Equations Correctly Correctly Correctly
Defined
Correctly
0-3 4-5 7-8 10
SECTION Missing Missing 3-4 Missing 1-2 At least Two
VISUALS More than 4 Meaningful Meaningful Meaningful
Meaningful Visuals Visuals Visuals for
Visuals Each Section
0-3 4-6 8 10
TYPED FLASH Requirement At least 75 All of the All of the
CHARTS not Met/Less % of Flash Flash Chart Flash Chart
than 75% of Chart is is Typed is Typed
Flash Chart Typed (sans (messy (sans
is Typed calculations) calculations) calculations
(sans but they are
calculation) written
neatly)
4 6 8 10
CONTENT Content Content Content Content
QUALITY Quality is Quality is Quality is Quality is
Poor Satisfactory Very Good Excellent
4 6 8 10
ORGANIZATION/ Majority of Some Flash Chart Flash Chart
NEATNESS Flash Chart Sections of is Organized is Very
is the Flash Organized
Unorganized Chart are
Unorganized
1 2 3 5
CREATIVITY/ Very Little Some Creative Meaningful
PERCEIVED Perceived Perceived Touches Creative
EFFORT Effort Effort Were Added/ Touches
Some Were Added/
Perceived A lot of
Effort Perceived
Effort
Formatted Table
CRITERIA POINTS
Teacher Comments:
TEAM TRIVIA: INTERFERENCE AND
DIFFRACTION
Instructions: Divide class into groups of 3 or 4. Pass out 4 note cards (with letters A, B, C, and D
on one card each) to each group OR if you have a clicker system with your Smartboard give each group a
remote (there is a ppt with these questions on them). Allow students to use scrap paper and calculators.
You may provide equations to each group as well. Read the question and all the choices allowed to the
class and let each group send up a representative with their answer. Every group should get a chance to
answer (this is not a first come first served game). At the end of the multiple choice round pass out the
Bonus Round Sheet to each group to work on (you may establish an appropriate time limit). Tally up
each groups’ points. I usually give 1st place 6 pts on their evaluation, 2nd place 5 pts, etc. (you can award
your winners any way that you like).
1. Projected on a screen is a two-slit interference patter, the fringes are evenly spaced on the screen
a) LED
b) Fluorescent
c) Laser
d) Incandescent
a) refraction
b) transmission
c) pulsed
d) embossed
a) Gas-ion barrier
b) Stimulated emission
c) Photon beam
d) Active medium
a) Reduce interference
b) Eliminate coherence of light waves
c) Enhance dispersion
d) Maximize diffraction patterns
7. In a double slit experiment, the angle between the central maximum and the second bright fringe is
2°. The slit separation is 3.8 E -5 m. What is the wavelength of the light source?
a) 5.3 E-7 m
b) 6.6 E -7 m
c) 5.9 E -8 m
d) 6.4 E -8 m
8. To meet the needs to form an interference pattern a(n) _______________ is usually used as a light
source.
a) Halogen bulb
b) Mercury vapor lamp
c) Laser
d) Light Emitting Diode
10. Extra point question: The inelastic scattering (KE is not conserved) of a photon is called
a) Rayleigh Scattering
b) Tyndall Scattering
c) Raman Scattering
d) Mie Scattering
INTERFERENCE AND DIFFRACTION
BONUS ROUND
Group Member Names: _____________________________ Date: _________Period: ____
Group #: _________
1. If you had two incandescent light bulbs as your light source would interference occur? Explain your
answer.
2. Who first demonstrated interference in light waves from two sources in 1801?
3. In a double slit interference pattern the 1st order bright fringe appears 0.25 cm from the central
maximum. The distance between the slits is 0.5 mm and the wavelength is 463 nm. What is the
angle?
6. In a double slit experiment the slits are separated by 0.3096 mm and has a light with a wavelength of
589 nm. What is the angle of the 4th order minimum from the central maximum?
ANSWER KEY: INTERFERENCE AND
DIFFRACTION BONUS ROUND
Group Member Names: _____________________________ Date: _________Period: ____
Group #: _________
1. If you had two incandescent light bulbs as your light source would interference occur? Explain your
answer.
No interference occurs. The sources must be coherent (maintain a constant phase change with respect to
each other) and light waves from an ordinary source such as a light bulb undergo random phase changes in
time intervals shorter than a nanosecond that our eyes cannot follow such rapid changes and therefore no
interference is observed. Also, the source should by monochromatic (single wavelength). *You can create a
set-up that makes the light bulbs coherent.
2. Who first demonstrated interference in light waves from two sources in 1801?
Thomas Young
3. In a double slit interference pattern the 1st order bright fringe appears 0.25 cm from the central
maximum. The distance between the slits is 0.5 mm and the wavelength is 463 nm. What is the
angle?
Convert: 0.25 cm 2.5 E -3 m, 0.5 mm (not needed to solve problem) 5 E -4 m, and 463 nm 463 E -9
m or 4.63 E -7 m
6. In a double slit experiment the slits are separated by 0.3096 mm and has a light with a wavelength of
589 nm. What is the angle of the 4th order minimum from the central maximum?
Remember the 4th dark fringe is between the 3rd and 4th bright fringe so m = 3
d(sin) = (m + ½) m = 0, ±1, ±2,… = sin-1([(m+ ½)]/d) = sin-1([(3 + ½)(589 E -9)]/(3.096 E -4))
0.38°
INTERFERENCE AND DIFFRACTION EVALUATION
Name: ____________________________________ Date: __________________ Period: ______
Please circle your answers for mathematical problems and you must show your work to earn
any partial credit.
y = Ltan
3) Your car has two headlights. What sort of interference pattern do you expect to be seen
from them? Explain.
4) Light with a wavelength of 650 nm is shone on a grating. The angle between the zero
and third order bright fringe is 31.5°. A) Calculate the spacing between the slits on the
grating. B) Calculate the number of lines/m on the grating.
5) A diffraction grating having 400,000 lines/m has a 600 nm light source shone on it.
Calculate the angle between the zero maximum and the first order maximum.
7) The second order maximum fringe is obtained at an angle of 19°. The grating has 300
lines/mm. What is the wavelength of the light?
8) Describe the changes in a single-slit diffraction pattern as the width of the slit is
decreased.
9) Two slits are 0.05 mm apart. A laser of wavelength 633 nm is incident to the slits. A)
Calculate the angle of the third dark fringe.
10) Monochromatic light ( = 441 nm) is shone upon a narrow slit. On a screen 2 m away,
the distance between the second diffraction minimum and the central maximum is 1.5
cm. What is the width of the slit?
ANSWER KEY: INTERFERENCE AND DIFFRACTION
EVALUATION
Name: ____________________________________ Date: __________________ Period: ______
Please circle your answers for mathematical problems and you must show your work to earn
any partial credit.
y = Ltan
10.96°
6.74 E – 6 m
3) Your car has two headlights. What sort of interference pattern do you expect to be seen
from them? Explain.
None. Headlights are not coherent sources (cannot produce sustained interference patterns)
Bonus points: the headlights are so far apart in comparison to the wavelength emitted that
even if they were made into coherent sources, the interference maximum and minimum would
be too closely spaced to be observed.
4) Light with a wavelength of 650 nm is shone on a grating. The angle between the zero
and third order bright fringe is 31.5°. A) Calculate the spacing between the slits on the
grating. B) Calculate the number of lines/m on the grating.
3.73 E – 6 m
5) A diffraction grating having 400,000 lines/m has a 600 nm light source shone on it.
Calculate the angle between the zero maximum and the first order maximum.
13.89°
7) The second order maximum fringe is obtained at an angle of 19°. The grating has 300
lines/mm. What is the wavelength of the light?
5.42 E -7 m or 542 nm
8) Describe the changes in a single-slit diffraction pattern as the width of the slit is
decreased.
The bands get wider and dimmer. Longer wavelengths will produce fringes with greater
spacing on the screen because the spacing is directly proportional to the wavelength.
9) Two slits are 0.05 mm apart. A laser of wavelength 633 nm is incident to the slits. A)
Calculate the angle of the third dark fringe.
Remember the 3rd dark fringe is between the 2nd and 3rd bright fringe so m = 2
1.81°
10) Monochromatic light ( = 441 nm) is shone upon a narrow slit. On a screen 2 m away,
the distance between the second diffraction minimum and the central maximum is 1.5
cm. What is the width of the slit?
Remember the 2nd dark fringe is between the 1st and 2nd bright fringe so m = 1
d(sin) = (m + ½) m = 0, ±1, ±2,… d = (m + ½)/sin d = [(1 + ½)(441 E -9)]/ sin 0.43°]
d = 8.81 E -5 m
LIGHT
INTERFERENCE
http://en.wikipedia.org/wiki/Moir%C3%A
9_pattern
http://en.wikipedia.org/wiki/Moir%C
3%A9_pattern#mediaviewer/File:Moi
re_on_parrot_feathers.jpg
http://www.dailymail.co.uk/news/article-
2096924/Rug-makes-seasick.html
MOIRE’ PATTERNS
IRIDESCENCE
• Objects that show a
rainbow of colors which
can change depending
on our point of view, are
considered iridescent.
• Iridescence is from the
Latin word, "iris,"
meaning rainbow.
• Iridescence is caused
by "structural colors"
rather than pigment
molecules. http://www.flickr.com/photos/atlapix/1236129334/
http://www.microscopyu.com/articles/polarized/interferenceintro.html
http://www.answers.com/topic/thin-
film-optics
http://www.itp.uni-
http://nine-radical.blogspot.com/2007/04/8-eye- hannover.de/~zawischa/ITP/multibea
evolution-wars-of-perfection.html m.html
CAUSE OF IRIDESCENCE
• Constructive and destructive interference of
different wavelengths of light produces different
colors when viewed at different angles of incident
light.
• Seen with thin-films (Soap Bubbles, Oil on Water)
or with diffraction gratings (pearls, CDs).
• Colors seen are due to:
o index of refraction
o thickness of the film/grating
o wavelength of light
o angle of incidence
REMEMBER: PHASE CHANGES AT BOUNDARIES
http://snvphysics.blogspot.com/2011/03/waves.html
nair = 1
OIL Thickness of
noil = 1.5 Film is ¼ the of
Red Light
nwater = 1.33
WATER
Red light reflected from the top surface interferes constructively with red
light from the bottom surface, so the film looks red. Light of the other
colors experiences destructive interference.
DESTRUCTIVE INTERFERENCE
AND THIN-FILMS
• Ex) non-reflective coatings and colors are seen
on silicon wafers with a SiO2 thin-film.
• Since nsubstrate> nfilm > nair both the top and bottom
reflected waves have 180o phase shift.
• Most colors of light will constructively interfere.
• But, if the thickness of the film is ¼ (of a certain
color of light) the light would travel an extra
distance of ½ .
• This color’s is out of phase with the top reflected
wave and cancels (Deconstructive Interference).
• The color seen is a mix of the other frequencies.
THICKNESS OF FILM DETERMINES
COLOR
Color is perceived as
Purple
Light reflecting from the bottom surface travels an extra distance of ½ the of
green light. Green light reflected from the top surface interferes destructively with
green light from the bottom surface. Most of the light in the middle region of the
visible spectrum is transmitted and not reflected. Since some violet and red light
is reflected the coating is perceived as purple.
SPECTRUM APPLET
http://www.cs.rit.edu/~ncs/color/a_spectr.html
Film
Thickness Color of Film
(Å)
500 tan The appearance of color
is due to the
700 brown constructive and
1000 dark violet to red violet destructive interference
of light. The
1200 royal blue
wavelengths of light in
1500 light blue to metallic blue SiO2 which undergo
http://fabweb.ece.uiuc.edu/gt/gt/gt7.aspx
destructive interference
1700 metallic to very light yellow-green
is given by:
2000 light gold or yellow - slightly metallic k=(5.84t)/(2k + 1)
2200 gold with slight yellow-orange Where:
λ = wavelength
2500 orange to melon t = oxide thickness
2700 red-violet k = 0, 1, 2, ... (and which
give solutions in the
3000 blue to violet-blue
visible light spectrum)
3100 blue The color of light seen is
the eyes response to the
3200 blue to blue-green
amplitude of the
3400 light green wavelengths remaining.
3500 green to yellow-green
HOLOGRAMS
• Holography depends on the Close-up photograph
coherent nature of laser light to of a hologram's surface
(a toy van). Can not
create an interference pattern tell what it is similar to
that produces a 3-D image trying to identify what
when illuminated by a light music has been
source. Four main types: recorded by looking at
the surface of a CD.
transmission, reflection, pulsed The hologram is
and embossed defined by the speckle
• Many pairs of beams form an
http://en.wikipedia.org/wiki/H pattern, rather than the
olography
"wavy" line pattern.
extremely complicated The holograms found on credit cards and
interference pattern on film, other ordinary objects are embossed
one that can be produced only holograms mass-produced by stamping the
if the phase relationship of the pattern onto foil.
http://science.howstuffworks.com/ho
Image courtesy Dreamstime;
2-wave pairs is constant
throughout the exposure of the
logram10.htm
film. This condition is met
through the use of light from a
laser because of the
coherence of laser light.
SOME TYPES OF HOLOGRAMS
• Transmission: they should be lit from behind (like a slide in
a slide projector). It can be difficult to light the hologram
in this manner so a mirror or a foil backs the hologram.
• Embossed: are a type of transmission hologram; most
common; can be massed produced quickly and cheaply;
The original hologram is made into a metal copy and
duplicates are used to create millions of copies by
embossing the pattern into soft aluminized plastic.
• Reflection: the object and reference beams are incident
on the plate from opposite sides of the plate. The
reconstructed object is then viewed from the same side of
the plate as that at which the re-constructing beam is
incident.
• Pulsed: instead of a steady laser being directed on the
image a rapidly pulsed laser is used. This reduces the
need for vibrational tables.
If you tear a hologram in half, you can still
see the whole image in each piece. The same
is true with smaller and smaller pieces.
1- Channel: You can see several views of Multi-Channel: "Channels" mean different
kitten and "movement" of background. images, recorded on the same hologram.
Although hologram was recorded on flat Such images appear in a hologram one after
media, you can see full 3D illusion of the another during observation. There are two
object. channels within this picture.
NSS: PHYSICAL SCIENCE
• MOTIONS AND FORCES
• Gravitation is a universal force that each mass exerts on any other mass. The
strength of the gravitational attractive force between two masses is proportional to
the masses and inversely proportional to the square of the distance between
them.
Hold two identical combs so that one is directly in front of the other and they are about a finger-width
apart. Look through the teeth and notice the patterns of light and dark that appear. This is a moire
pattern. Slide the combs from side to side and watch the moire pattern move. Now rotate one comb
relative to the other and notice how the pattern changes.
If you only have one comb, hold it at arm's length, about 1 inch (2.5 cm) from a mirror. Look through
the comb at its reflection in the mirror. Notice how the moire pattern moves when you move the comb
to the side or slowly tip one end away from the mirror.
Look through two layers of window screen. Observe the moire patterns as you slide one layer from
side to side across the other, or when you rotate one layer. You can also create interesting patterns by
flexing one of the screens.
If you only have one piece of screen, you can still make moire patterns - even if the screen is still
mounted in a window or a door. Have a friend hold a sheet of white cardboard behind the screen, and
shine a single bright light onto the screen. (On a sunny day, sunshine can serve as your light source.)
Start with the cardboard touching the screen, then move it away, tilting the cardboard a little as you
go. The screen will form a moire pattern with its own shadow. Replace the cardboard with flexible
white paper and bend the paper. Notice how the pattern changes.
Use a copy machine to make two transparencies from the pattern of concentric circles provided with
this Snack as a separate page, here. Look through these two patterns as you move them apart and
then together. The moire pattern consists of radiating dark and light lines.
You can project moire patterns so that a large group can see them. Just make two transparencies of a
repetitive pattern and overlap the transparencies on an overhead projector. Moire patterns from books
may be enlarged or reduced and made into transparencies on a copy machine.
When two identical repetitive patterns of lines, circles, or arrays of dots are overlapped with imperfect
alignment, the pattern of light and dark lines that we call a moire pattern appears. The moire pattern
is not a pattern in the screens themselves, but rather a pattern in the image formed in your eye. In
some places, black lines on the front screen hide the clear lines on the rear screen, creating a dark
area. Where the black lines on the front screen align with black lines on the rear, the neighboring clear
areas show through, leaving a light region. The patterns formed by the regions of dark and light are
moire patterns.
In the case of the two sets of concentric circular lines, the dark lines are like the nodal lines of a two-
source interference pattern. A typical two-source interference pattern is created when light passes
through two slits. Along lines known as nodal lines, the peaks of the light waves from one slit and the
valleys of the light waves from the other slit overlap and cancel each other. No light is detected along
a nodal line.
In the black radiating lines of the moire pattern, the black lines of one moire pattern fill the
transparent lines of the other. Note that as the patterns are moved apart, the dark, nodal lines move
together. This is the same thing that happens when light passes through two slits and the slits are
moved farther apart.
Moire patterns magnify differences between two repetitive patterns. If two patterns are exactly lined
up, then no moire pattern appears. The slightest misalignment of two patterns will create a large-
scale, easily visible moire pattern. As the misalignment increases, the lines of the moire pattern will
appear thinner and closer together.
Once you have learned to see moire patterns, you'll begin to see them practically everywhere. Look
through two chain-link fences and notice the pattern.
Watch it shift as you drive by. Look through a thin, finely woven fabric, such as a white handkerchief,
or some pantyhose material. Now fold the fabric over and look again through two layers. You'll see
moire patterns. Slide the fabric around and watch the patterns dance and change.
If your browser uses Shockwave, watch moire in motion at our Spatial Beats phenomenon page.
Snack Home | Teacher Institute Home | Teaching Tools | Use Policy | Contact
© Exploratorium | The museum of science, art and human perception
DIFFRACTION OF
LIGHT
Diffraction, Lasers and Holograms
http://dansdata.blogsome.com/2006/12/19/light-bulb-diffraction/
DIFFRACTION
• Diffraction: the spreading of waves Diffraction
pattern from a slit
into a region behind an obstruction. width equal to
wavelength of an
• Diffraction patterns are less spread incident plane
wave in 3D
out-and therefore less visible-when spectrum
visualization
light passes through a wider slit.
This is due to the slit no longer Diffraction pattern
resembles a point source. The light from a slit width
equal to five times
from broad sources is responsible the wavelength of
an incident plane
for the sharp shadows produced by wave in 3D
spectrum
obstacles. visualization
Light spreads out, or diffracts, from The diffracted beams from two slits The effect of increasing the number of
the narrow slit opening, to form a interfere to make narrow bands of slits is to narrow and brighten the
diffraction pattern on the screen. light and dark, interference fringes on bright fringes. Smaller bright fringes
the screen. between the major fringes disappear
as more slits are used.
source.
ID=1044
https://wiki.brown.edu/confluence/display/PhysicsLa
bs/PHYS+0040+Basic+Physics
DIFFRACTION AND OPTICAL INSTRUMENTS
• Resolution: ability of an optical
instrument to resolve detail in the
object that is being imaged. It depends
estilo.com/Articles/Photography-
basics/lens-diffraction-limit.html
http://www.imagen-
on wavelength and aperture width.
• The resolution of an optical instrument
can be limited by factors such as flaws in
the lenses or misalignment. However,
there is a max to the resolution of any
optical instrument due to diffraction.
http://www.xenophilia.com/zb0012a.htm
• Resolving power is the ability of an
optical instrument to separate two
images that are close together. It is
greater for short wavelengths.
DIFFRACTION AND OPTICAL INSTRUMENTS
RESOLUTION
Airy diffraction patterns generated
by light from two points passing
http://en.wikipedia.org/wiki/Angular_resolution
through a circular aperture, such as
the pupil of the eye. Points far
apart (top) or meeting the Rayleigh
criterion (middle) can be
distinguished. Points closer than
the Rayleigh criterion (bottom) are
difficult to distinguish.
LASERS: Light Amplification by Stimulated
Emission of Radiation
• A laser is a device that converts light,
electrical energy, or chemical energy
into coherent light.
• There are many types of lasers but
they all use an active medium to
which energy is added to produce
coherent light.
• The active medium can be solid, liquid,
or gas. The composition of the active
medium determines the wavelength,
or color, of the light produced by the
laser. Red (635nm), green (532nm) and blue (445nm) laser
pointers; http://en.wikipedia.org/wiki/Laser_pointer
LASERS
• Unlike incandescent light
sources that emit
electromagnetic waves at
different times and in different
directions, lasers produce an
intense, nearly parallel beam of
coherent light.
• Because the light waves are in
phase in a laser, they interfere
constructively at all
points.(increases amplitude
energy)
All Images: http://www.pegasuslaser.com/physics-safety/properties.php
HOW A LASER WORKS
USES OF LASERS Laser beam aimed at
detected again.
• Lasers improve information storage http://www
players.
• Lasers are used in medical
United States Air Force laser experiment;
http://en.wikipedia.org/wiki/Laser
A patient undergoes eye
http://www.stebbing.co.nz/resource_pages/cddvdworks.html
TRACKING SYSTEM
The tracking system, as it plays the CD/DVD,
has to continually move the laser outward.
As the laser moves outward from the center
of the disc, the bumps move past the laser
faster -- this happens because the linear
speed of the bumps is equal to the radius
times the speed at which the disc is
revolving (rpm). Therefore, as the laser
moves outward, the spindle motor must slow
the speed of the CD. That way, the bumps
travel past the laser at a constant speed, and
the data comes off the disc at a constant
rate.
http://express.howstuffworks.com/express-cd.htm
DATA RETRIEVAL OF A CD/DVD
The laser focuses on the track of data bumps
http://express.howstuffworks.com/express-cd1.htm
and shoots the laser beam through the
polycarbonate layer so that it reflects off the
aluminum layer. The reflected light activates a
special on/off switch, called an opto-electronic
switch. This then takes in the binary
information and translates it into an audio
format.
CD grating
Laser central
spot
screen
http://hyperphysics.phy-astr.gsu.edu/hbase/phyopt/grating.html Photograph taken by Porter-Davis and Balachandran at Georgia Tech (Summer 2008)
AFM Images of CD/DVD (unrecorded)
http://wdict.net/img/emission+spectrum.jpg
• Using this idea,
unknown samples can
be analyzed using
spectrometers then
compared to known
patterns to determine
the sample’s make-up.
HOW SPECTROMETERS WORK
• A simple device that begins with a way of collecting light from a sample and
guiding that light onto a diffraction grating. The diffraction grating then directs
light onto mirrors, which lead the light to either a flat surface to show the
spectrum or a charged coupled device (CCD) chip, which can record the light
pattern.
http://upload.wikimedia.org/wikipedia/commons/f/f6/Spectrometer_schema
tic.gif
TYPES OF SPECTROMETERS
Used for
• Spectroscope: uses a Simple Spectroscope Gemology
http://gemologyproject.co
diffraction grating to separate m/wiki/index.php?title=Sp
ectroscope
electromagnetic radiation
(light) into its component
Gemstone-Diffraction-Spectroscope-
http://www.ebay.com/itm/GEM-
Spectrascope-/390165182556
wavelengths. The spectroscope
can be used to measure
absorption or emission spectra. http://www.amazon.com/Envision-Quantitative-Analysis-
Spectroscope/dp/B0027UNRHY
http://www.scienceinschool.org/reposi
tory/images/issue4spectrometer11_lar
ge.jpg
Spectroscopes are used in
Astronomy to determine the
make-up of stars.
http://amazing-space.stsci.edu/resources/explorations/groundup/lesson/basics/g23/ http://www.uwplatt.edu/chemep/chem/chemscape/labdocs/catofp/measurep/spectro/spectrs3.htm
TYPES OF SPECTROMETERS
• Raman Spectroscopy: a technique used to
detect vibrational, rotational and other
low frequency modes in a sample.
• Based on Raman scattering which is an
inelastic scattering (KE is not conserved) of
a photon.
• The photon is the incident particle and http://en.wikipedia.org/wiki/Raman_transition
MATERIALS
CDs, DVDs, diffraction gratings of various sizes, laser pointers, screen/poster board, tape, rulers/meter-sticks,
clamps, AFM images of a CD and DVD gratings (provided), razor blades, tweezers, packing tape(for making
the diffraction gratings from the CDs/DVDs
ADVANCED PREPERATIONS
RETRIEVAL OF PHYSICAL DIFFRACTION GRATINGS FROM CDs AND DVDs
DVDs
1) Identify the two layers and take a razor blade and carefully slice between them. They should separate fairly
easily.
2) Discard the protective polycarbonate coating.
3) Take large pieces of tape (packing tape works well) and gently press the tape onto the reflective surface and
then rip the tape off. Continue this until the majority of the metal coating is removed. (Sometimes small pieces
of metal are difficult to remove – this is not a problem just use a portion that is clear for the large scale
experiment or for imaging purposes).
4) Cut into 3 cm x 3 cm sections (large enough that they can be clamped and used with a laser pointer)
CDs
SAFETY INFORMATION
LASERS
Most lasers used in high school laboratories are the continuous wave, low power (0.5 - 3.0 mW.) lasers. The main danger
is possible damage to the retina if a student looks directly into the beam or non-diffused reflection. Remind the
students of this and direct them to be very careful when using the lasers.
RAZOR BLADES
The blades are quite sharp and could cut or puncture a student. The teacher may want to handle the process of opening
the DVDs prior to the student’s lab.
Use the hard copies of the images provided and with a ruler measure the distance between tracks.
Have the students perform the calculations to determine the distance between tracks and compare
to the other data obtained.
Step 1: Prepare CDs and DVD s to use as diffraction grating (see above)
Step 2: Gather materials and set up each group for the lab
Use another stand to position the diffraction grating in front of the laser such that the light from the laser is
incident normally on the grating. Place the grating as close to the laser as possible.
Use a blank wall/white board/poster board as the screen so that the diffraction pattern can be observed clearly.
It is preferable that the room be dark so that it is easy to observe the diffraction pattern. The laser should be
positioned about a meter (or less) away from the screen.
Switch on the laser and look for the central non-diffracted beam spot on the screen. The first order maxima
should be visible on either side of the central spot. The second and third order can also be observed but may not
be as bright as the first order image. A student from each group should mark these spots.
If the images are not on a horizontal on the screen rotate the CD and change its orientation until you get the
images on a horizontal line. Note that the tracks are spiral in a CD or DVD and so the spacings are not exactly
parallel. The treatment for a plane transmission grating can be applied to a CD or DVD grating to a good
approximation. This is also why the first and second order images may not be exact spot images of the laser
beam.
Picture and Diagram of the experimental set up
DIFFRACTION EQUATIONS
dsincalc. = m and y = Ltanobser.
y m=1
d = distance between slits
d
Central bright fringe
= path angle
y
m = order number m=1
= wavelength of light L
CD grating
screen
Diffraction Gratings:
Since the angle of diffraction for the first order is not really small (about 22 °), the approximation
that sin θ = tanθ is not valid. Evaluate tan θ using the equation given in Step 4; if the first order
image is too spread out on the screen on either side try reducing the distance of the screen to the
laser setup.
y (screen)
Equation 2: y = Ltanobser observ = tan-1(y/L)
laser
Calculate Percent Error: Have the students compare the observed and calculated angles by using percent
error. I have gotten pretty good results with this. The main error is that the students did not convert d
correctly. O - A/A x 100% (O is the observed angle value and A is the calculated value)
Repeat the same procedure for a CD/DVD. With the DVD, it may be difficult to observe the second and the third
order images; it is also advisable to move the laser arrangement much closer to the screen so that the first order
image is closer to the central non-diffracted spot. Measure y and L using the same procedure in Step 5. Using
equation 2 calculate the angle and then use that angle and the wavelength of the laser and m = 1 to calculate d.
Then measure spacing between tracks on the given AFM images (remind the students to convert values from
their ruler to the nano-scale), this will be dmeasured. Have the students calculate percent error with O as the
measured d and A as the calculated d.
Fig1a. AFM image : Sample : Memorex CD 750 MB; 1b. Line scan of the image
blank; scan size 10 micrometer
Calculations for the CD image:
(Note that the grating element is the combined width of the opaque and transparent lines in a regular grating;
so measure the distance between tracks as including the width of the track – See arrow in scan)
2a. AFM image Sample : Sony DVD-R 4.7 GB; Fig 2b- Line scan of the sample
Blank, scan size 5.0 micrometer
MATERIALS:
Diffraction gratings, a CD/DVD with aluminum coating removed, laser pointer, ring-stand with clamp, and
white screen (or poster board)
PROCEDURE:
Use the information on the diffraction gratings to compare the calculated angle of diffraction with the
measured one (first order maximum). Use a CD/DVD as a diffraction grating and determine the distance
between the grooves.
Wavelength of laser (): _________________ m
DATA:
DIFFRACTION EQUATIONS
dsincalc. = m and y = Ltanobser.
y m=1
d = distance between slits
d
Central bright fringe
y = distance from central to 1st bright
fringe y
m=1
= path angle
L
m = order number Length from grating to wall/board
1 E -5
100 lines/mm
3.33 E -6
300 lines/mm
1.89 E -6
530 lines/mm
1.67 E -6
600 lines/mm
For the CD/DVD:
Calculate the diffraction for the first order maximum using the measured y and L. Then using the calculated angle solve
for d using dsincalc. = m. Compare it to the d measured from the AFM image of the CD/DVD using the % Error
equation.
(meters) (meters)
Fig1a. AFM image : Sample : Memorex CD 750 MB; 2a. AFM image Sample : Sony DVD-R 4.7 GB;
blank; scan size 10 micrometer Blank, scan size 5.0 micrometer
REFRACTION, DIFFRACTION AND
OPTICAL INSTRUMENTS
LENSES
• Converging lens are thicker at the
middle and bend the ray of light
inward.
• Diverging lens are thicker at the edge
and bend the ray of light outward.
• The images formed can be either real
or virtual, depending on the type of
lens and on the placement of the
object.
http://www.physicsclassroom.com/Class/refrn/u14l5a.cfm
THE CAMERA AND THE EYE
• The human eye and a camera are structured and work
very similarly to each other.
• They both have a light opening (iris or aperture) lens
assembly and an imaging sensor.
• The lens assembly takes in a portion of the light reflected
from an object, and focuses it onto a imaging sensor. The
imaging sensor then changes the light into a signal, either
electronic (film or charge coupled device) or neural
(retina).
http://sciencewithme.com/learn-
about-the-human-eye/
THE CAMERA AND THE EYE
http://www.teamlocals.co.uk/portsmouth-natural-history-museum-
transformed-into-camera-obscura-for-family-workshops-044
http://rst.gsfc.nasa.gov/Sect10/Sect10_2.html
COMBINATION OF THIN LENSES
• If 2 lenses are used to form an image the
image of the 1st lens is calculated as
though the 2nd lens were not present.
• The image formed by the first lens is
treated as the object for the second lens.
• The overall magnification of a system of
lenses is the product of the magnifications
of the separate lenses.
LIGHT MICROSCOPE AND REFRACTING
TELESCOPE
http://science.howstuffworks.com/light-microscope5.htm
are not always clear because the light is being bent and
ry/opticnerve20xsmall.html
http://www.odec.ca/projects/2005/dong5a0/public_html/RFracTeles.png
DIFFRACTION AND RESOLUTION
• Resolution: ability of an
optical instrument to resolve
detail in the object that is
estilo.com/Articles/Photography-
basics/lens-diffraction-limit.html
http://www.imagen-
being imaged. It depends on
wavelength and aperture
width.
• The resolution of an optical
instrument can be limited by
factors such as flaws in the
http://www.xenophilia.com/zb0012a.htm
lenses or misalignment.
However, there is a max to
the resolution of any optical
instrument due to diffraction.
RESOLVING POWER
• Resolving power is the ability of an
optical instrument to separate two
images that are close together. It is
greater for short wavelengths.
= Angular Resolution
= wavelength of light
D = diameter of the lens’ aperture
DIFFRACTION AND OPTICAL
INSTRUMENTS
http://en.wikipedia.org/wiki/Angular_resolution
circular aperture, such as the
pupil of the eye. Points far
apart (top) or meeting the
Rayleigh criterion (middle)
can be distinguished. Points
closer than the Rayleigh
criterion (bottom) are
difficult to distinguish.
INCREASING RESOLUTION IN OPTICAL
MICROSCOPES
TIPS TO GET A
BETTER RESOLUTION
1) Clean coverslips
and specimen
slides
2) Use correct
coverslips
(thickness)
3) Use the correct
immersion oil/fluid
4) Use a Super
resolution
Microscope http://zeiss-campus.magnet.fsu.edu/articles/superresolution/introduction.html
LENS ABERRATIONS
• As with spherical mirrors, spherical
aberration occurs for lenses also.
• Spherical aberration creates a blurry
image due to the light rays not
converging/diverging in the same place.
• Chromatic aberration is the focusing of
different colors of light at different
distances behind a lens.
SPHERICAL ABERRATIONS
http://commons.wikimedia.org/wiki/File:Spherical_aberration_2.svg http://www.dofpro.com/sagallery.htm
CHROMATIC ABERRATIONS
http://www.tlc-systems.com/artzen2-0047.htm
http://commons.wikimedia.org/wiki/File:C
hromatic_aberration.png
http://commons.wikimedia.org/wiki/File:Chromatic_aberration_%
28comparison%29_-_enlargement.jpg
REFERENCES
• Serway, Raymond A., and Jerry S. Faughn. Holt Physics. Austin, Texas:
Holt, Rinehart and Winston, 2000.
Smith, Steven W. Ph.D. The Scientist and Engineer's Guide to
Digital Signal Processing © 1997-2011 by California Technical Publishing.
Web. 06 June 2014. http://www.dspguide.com/copyrite.htm
“Introduction to Superresolution Microscopy”. Education in Microscopy
and Digital Imaging. Carl Zeiss and Molecular Expressions. Web. 06 June
2014 http://zeiss-
campus.magnet.fsu.edu/articles/superresolution/introduction.html
• “Refraction and Ray Model of Light”. The Physics Classroom. © 1996-
2010 The Physics Classroom, All rights reserved. comPADRE. June 18,
2010. [http://www.physicsclassroom.com/Class/refrn/]
• “Refracting and Reflecting Telescopes”. ORACLE Think Quest Education
Foundation. 2001. ORACLE Think Quest Education Foundation. June 21,
2010.
[http://library.thinkquest.org/J0112188/refracting_and_reflecting_telesc
opes.htm]
GPS: PHYSICS
SP4. Students will analyze the properties and applications of waves.
• a. Explain the processes that results in the production and energy transfer of
electromagnetic waves.
• b. Experimentally determine the behavior of waves in various media in terms of
reflection, refraction, and diffraction of waves.
• c. Explain the relationship between the phenomena of interference and the
principle of superposition.
• e. Determine the location and nature of images formed by the reflection or
refraction of light.
SP1. Students will analyze the relationships between force, mass, gravity, and the motion of objects.
• d. Measure and calculate the magnitude of frictional forces and Newton’s three Laws of Motion.
• e. Measure and calculate the magnitude of gravitational forces.
SP3. Students will evaluate the forms and transformations of energy.
• a. Analyze, evaluate, and apply the principle of conservation of energy and measure the components
of work-energy theorem by
– • describing total energy in a closed system.
– • identifying different types of potential energy.
– • calculating kinetic energy given mass and velocity.
– • relating transformations between potential and kinetic energy.
• b. Explain the relationship between matter and energy.
• e. Demonstrate the factors required to produce a change in momentum.
NATIONAL SCIENCE STANDARDS
• MOTIONS AND FORCES
• Objects change their motion only when a net force is applied. Laws of motion are used to calculate precisely
the effects of forces on the motion of objects. The magnitude of the change in motion can be calculated using
the relationship F = ma, which is independent of the nature of the force. Whenever one object exerts force on
another, a force equal in magnitude and opposite in direction is exerted on the first object.
• Gravitation is a universal force that each mass exerts on any other mass. The strength of the gravitational
attractive force between two masses is proportional to the masses and inversely proportional to the square of
the distance between them.
Materials:
1) Clear nail polish
2) black construction paper
3) Aluminum cooking pan (large enough to hold the paper and deep enough for it to be submerged)
4) Water
Procedure:
1) Fill the cooking pan with water.
2) Place the sheet of construction paper into the pan of water.
3) Using the brush of the nail polish, drip in one drop of nail polish onto the center of the water.
4) Allow the nail polish time to spread into a thin layer on the surface of the water.
5) Lift the construction paper out of the water so that the layer of nail polish coats the paper.
6) Set the paper aside to dry.
7) Notice the thin-film that appears on the paper.
Questions:
1) What is a thin-film and how thin does it need to be?
3) Name two other examples of thin-films that you see out in the world?
4) Explain how the index of refraction plays a role in the phase shift of the light rays.
Materials:
1) Clear nail polish
2) black construction paper
3) Aluminum cooking pan (large enough to hold the paper and deep enough for it to be submerged)
4) Water
Procedure:
1) Fill the cooking pan with water.
2) Place the sheet of construction paper into the pan of water.
3) Using the brush of the nail polish, drip in one drop of nail polish onto the center of the water.
4) Allow the nail polish time to spread into a thin layer on the surface of the water.
5) Lift the construction paper out of the water so that the layer of nail polish coats the paper.
6) Set the paper aside to dry.
7) Notice the thin-film that appears on the paper.
Questions:
Thin-film interference can take place if these two light waves interfere constructively:
1. the light from the air reflecting off the top surface
2. the light traveling from the air, through the oil, reflecting off the bottom surface, traveling back
through the oil and out into the air again.
3) Name two other examples of thin-films that you see out in the world?
Soap bubbles, optics coatings, oil on water
4) Explain how the index of refraction plays a role in the phase shift of the light rays.
An important consideration in determining whether these waves interfere constructively or
destructively is the fact that whenever light reflects off a surface of higher index of refraction, a
180° phase shift in the wave is introduced.
Light in air, reflecting off just about anything (glass, water, oil, etc.) will undergo a 180° shift. On
the other hand, light in oil, which has a higher n than water does, will have no phase shift if it
reflects off an oil-water interface. Note that a shift by 180° is equivalent to the wave traveling a
distance of half a wavelength.
To get constructive interference, the two reflected waves have to be shifted by an integer
multiple of wavelengths. This must account for any phase shift introduced by a reflection off a
higher-n material, as well as for the extra distance traveled by the wave traveling down and back
through the film. With the oil film example, constructive interference will occur if the film
thickness is 1/4 wavelength, 3/4 wavelength, 5/4, etc. Destructive interference occurs when the
thickness of the oil film is 1/2 wavelength, 1 wavelength, 3/2 wavelength, etc.
http://physics.bu.edu/py106/notes/Thinfilm
.html
A) LED
B) Fluorescent
C) Laser
D) Incandescent
3) Which is not a type of hologram
that was discussed?
A) refraction
B) transmission
C) pulsed
D) embossed
4) What is the function of a
spectrometer?
5) Microscopes
http://micro.magnet.fsu.edu/primer/anatomy/anatomy.html
6) FAQ on lasers
http://www.phys.vt.edu/~jhs/faq/light.html
7) Atmospheric optics
http://www.atoptics.co.uk/
8) Rainbows
http://www.geom.uiuc.edu/education/calc-init/rainbow/
9) Polarization
http://www.polarization.com/index-net/
13) Electromagnetism – good NASA intro (electromagnetic spectrum song not that great,
but maybe students could come up with a better one; the ROY G. BIV song by They
Might be Giants is pretty cute – the website that this is linked to has quite a list of songs
but mainly on topics that are for younger students)
http://mail.colonial.net/~hkaiter/electromagspectrum.html
14) Microscope imaging site
http://www.exploratorium.edu/imaging-station/