Scribd
Upload
491 views

Lv8729 Stepper Driver Info

This document provides product details for the MKS LV8729 ultra quiet stepper motor driver. The driver supports Nema stepper motors under 1.5A and works well with 3D printer and CNC controller boards like MKS ROBIN and RAMPS1.4. Key features include support for voltages from 6V to 36V at default 0.8A or maximum 1.5A current, microstep resolutions from full to 1/128 steps, and a 4-layer PCB substrate. Instructions are provided on connecting the driver and setting the microstepping using jumpers as well as adjusting the current level using a potentiometer.

Uploaded by

Amos Thompson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
491 views

Lv8729 Stepper Driver Info

This document provides product details for the MKS LV8729 ultra quiet stepper motor driver. The driver supports Nema stepper motors under 1.5A and works well with 3D printer and CNC controller boards like MKS ROBIN and RAMPS1.4. Key features include support for voltages from 6V to 36V at default 0.8A or maximum 1.5A current, microstep resolutions from full to 1/128 steps, and a 4-layer PCB substrate. Instructions are provided on connecting the driver and setting the microstepping using jumpers as well as adjusting the current level using a potentiometer.

Uploaded by

Amos Thompson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Product Description

Report item

Item specifics

 Model Number:MKS LV8729

Product Description

Name: MKS LV8729

Overview
MKS LV8729 is a ultra quiet stepper motor driver, and good for Nema
stepper motor whose current is less than 1.5A, which makes motor steady,
quiet and precise.
Also, it does good work with MKS ROBIN, MKS GEN,MKS SBASE and
RAMPS1.4 controller board on 3d printer, carving machine, CNC, etc.
Shipping List
1pcs*MKS LV8729(with heatsink)
Features
Support 6V-36V .
Default 0.8A,1.5A Max. Advise using 1.3A Max.
Full Microstep:1,1/2,1/4,1/8,1/16,1/32,1/64,1/128.
4-layer substrate(PCB)
Connecting Direction
RAMPS1.4

Cautions
Please mind the connecting direction,

or else will burn the driver chip and controller board.


Microstep Setting
1.The jumpers on the board are M1,M2,M3. “High” means put jumpers on,
while “Low” is off.

As follows:
2.The Algorithm and Adjustment on LV8729 driver.
Formula: i=Vref/0.5, Vref defaults 0.4V.While current is 0.8A,1.5A Max.

As follows:
3.Please increase the current by rotating the potentiometer clockwise
slowly.
While reduce by rotating the potentiometer anticlockwise.
4.Please measure the Verf by multimeter.
Cautions: please disconnect all motors, or will burn the drivers and board.
Please plug the power supply as well as USB.

You might also like