AC Current Probe

Model MN261

The Model MN261 is the latest in Features Applications

­compact AC current probes. It is
designed to meet the most stringent • Small, compact size • Measuring in breaker panels
demands in industry and electrical • Measurement range of 0.1 to 24A, • Industrial loads
contracting. Model MN261 meets 0.5 to 240Aac
EN 61010, 600V, Cat. III safety • HVAC
­standards and is CE Marked and • Large jaw opening accommodates • Residential and commercial sites
UL approved in Canada and conductors up to 250MCM
• Data logging/recording
United States. • Designed for DMMs, loggers,
The Model MN261 has a 0.78” recorders and oscilloscopes
(20mm) jaw opening and accom- • 40Hz to 10kHz response
modate ­conductors up to 250MCM.
• 100mVac/Aac – 10mVac/Aac
The unique hooked jaw design
output signals
facilitates clamping and hooking onto
­conductors. Polycarbonate materi- • Designed to EN 61010, 600V
als and ultrasonic welding are used Cat. III safety standard
throughout to ensure ruggedness • U
 L approved for Canada and
and overall lasting reliability. United States
The Model MN261 uses tape-wound • Double Insulation
cores to further improve its high
and low end performance. Rated at • CE Mark
200Arms it has a measurement range
to 240Arms.

MN261_2115.82 (pdf) 1008 Rev.04

Technical Assistance (800) 343-1391 www.aemc.com 1 of 4

Specifications
MODEL MN261
ELECTRICAL
Nominal Range 20A & 200A
Measurement Range 0.1 to 24A, 0.5 to 240A
Transformation Ratio Voltage output
Output Signal 20A: 100mV/A,
200A: 10mV/A
Accuracy (20A Range) 1% of Reading ± 50mV
Phase Shift (20A Range) Not Specified
Overload (20A Range) 24A for 10 min ON, 30 min OFF
Accuracy (200A Range)
0.5 to 10A 3.0% of Reading ± 5mV
10 to 40A 2.5% of Reading ± 5mV
40 to 100A 2.0% of Reading ± 5mV
100 to 240A 1.0% of Reading ± 5mV
Phase Shift (200A Range)
0.5 to 10A Not Specified
10 to 40A ≤5.0°
40 to 100A ≤3.0°
100 to 240A ≤2.5°
Overload (200A Range) 240A for 10 min ON, 30 min OFF
Frequency Range 40 to 10kHz
Limit Operating
200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz
Conditions
Crest Factor 3 @ 200Arms with an error (due to CF) of 4%
Working/Common
600Vrms
Mode Voltage
Output Termination 6 ft BNC
MECHANICAL
Operating Temperature 14° to 131°F (-10° to 55°C)
Storage Temperature -40° to 158°F (-40° to 70°C)
Operating Relative
10 to 35°C 85% RH (without roll-off above 35°C)
Humidity
Jaw Opening 0.83” (21mm)
Maximum Conductor Size 0.78” (20mm)
Dimensions 5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight 6.5 oz (180g)
Polycarbonate Material Polycarbonate with fiberglass charge, UL94 V0
SAFETY
Electrical EN 61010-2-32
UL Approval Yes – Canada and United States
Double Insulation Yes
CE Mark Yes
Note: R
 eference conditions: 20 to 26°C, 20 to 75% RH, external magnetic field <40A/m, 48 to 65Hz sine wave, distortion factor less than
1%, no DC component, no external current carrying conductor, test sample ­centered. Load impedance >1Ω

MN261_2115.82 (pdf) 1008 Rev.04

Technical Assistance (800) 343-1391 www.aemc.com 2 of 4

 .73"
2.56" (65mm) (18.5mm)
.83" (21mm)

Ø=0.786" (20mm)
Cable max.

0.79 x 0.20"
(20 x 5mm)
Dual Bus Bar max.

5.47" (139mm)

2.00" (51mm) 1.18"

(30mm)

Lead with BNC:

Insulated 6.5 ft
(2m) coaxial cable
with insulated BNC
­connector rated
600Vrms

ORDERING INFORMATION CATALOG NO.

AC Current Probe Model MN261 (BNC – 100mA/A – 24A; 10mV/A – 240A max). . . . . . . . . . . . . . . . . . . . Cat. #2115.82
Includes a user manual
Accessories (Optional)
Banana (Female) – BNC (Male) Adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. #2118.46

MN261_2115.82 (pdf) 1008 Rev.04

Technical Assistance (800) 343-1391 www.aemc.com 3 of 4

Contact Us
United States & Canada:

Chauvin Arnoux®, Inc.

d.b.a. AEMC ® Instruments
200 Foxborough Blvd.
Foxborough, MA 02035 USA
(508) 698-2115 • Fax (508) 698-2118
www.aemc.com

Customer Support – for placing an order, obtaining price & delivery:

[email protected]

Sales Department – for general sales information:

[email protected]

Repair and Calibration Service – for information on repair & calibration, obtaining a user manual:
[email protected]

Technical and Product Application Support – for technical and application support:
[email protected]

Webmaster – for information regarding www.aemc.com:

[email protected]

South America, Central America, Mexico, Caribbean, Australia & New Zealand:

Chauvin Arnoux®, Inc.

d.b.a. AEMC ® Instruments
15 Faraday Drive
Dover, NH 03820 USA
(978) 526-7667 • Fax (978) 526-7605
[email protected]
www.aemc.com

All other countries:

Chauvin Arnoux® SCA

190, rue Championnet
75876 Paris Cedex 18, France
33 1 44 85 45 28 • Fax 33 1 46 27 73 89
[email protected]
www.chauvin-arnoux.com

MN261_2115.82 (pdf) 1008 Rev.04

Technical Assistance (800) 343-1391 www.aemc.com 4 of 4