Scribd
Upload
348 views

Static Pressure Calculations V1.1

This document contains a pressure drop calculation for AHU01. It lists 10 duct elements that make up the ventilation system, including straight duct sections, bends, dampers and transitions. It provides specifications for each element such as size, length, roughness and calculates the associated pressure loss. The total pressure loss for the system is determined to be 23 Pascals by summing the losses from each component and adding a 15% margin.

Uploaded by

sachinsaklani23
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
348 views

Static Pressure Calculations V1.1

This document contains a pressure drop calculation for AHU01. It lists 10 duct elements that make up the ventilation system, including straight duct sections, bends, dampers and transitions. It provides specifications for each element such as size, length, roughness and calculates the associated pressure loss. The total pressure loss for the system is determined to be 23 Pascals by summing the losses from each component and adding a 15% margin.

Uploaded by

sachinsaklani23
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Div/S.

div Calculated By Date:


Client: MEP/HVAC Sheet No. of

Project Code: Checked By Date:


1 of 1
Project name:

Title: Pressure Drop Calculation for AHU01

System type Ventilation System


Fluid type Air
Equipment Flowrate (Q) 0.0 L/s
3
Density (r) 1.2 Kg/m
Duct Material GI
Absolute Roughness 0.09 mm

Roughness Hydraulic Equivalent Effective Reynold Velocity Friction Friction Pressure Fitting Loss Fitting Pressure Total Pressure
Duct size Velocity
Description Flowrate Flowrate Length Factor Area Dia Dia Length No. Pressure Factor Loss Coefficient Loss Loss
Width/Dia Height ε Vo Dh De Le Re Pv λ DPf C0 DPl DPt
S. No
Duct Element/ Equipment
ASHRAE Fitting Number. (l/s) (m3/s) (m) mm (m²) (m/s) (m) (m) (m) (-) (Pa) (-) (Pa) (-) (Pa) (Pa)
description (m) (m)

1 Straight piece SP 2500 2.50 0.8 0.475 3 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 2.45 0 0.0 2.45
2 Bend 90° w/o vane CR3-1 2500 2.50 0.8 0.475 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 1.38 0 0.0 1.4
3 Damper, Butterfly CR9-1 2500 2.50 0.8 0.475 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 1.38 0 0.0 1.4
4 Fire Damper, Curtain Type, Type B, Horizontal
CR9-6 Duct 2500 2.50 0.8 0.475 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 1.38 0 0.0 1.4
5 Transition, Rectangular, Two Sides parallel,
ER4-1Symmetrical, Exhaust/Return
2500 System
2.50 0.8 0.475 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 1.38 0 0.0 1.4
6 Straight piece SP 2500 2.50 0.8 0.475 3 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 2.45 0 0.0 2.5
7 Straight piece SP 2500 2.50 0.8 0.475 3 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 2.45 0 0.0 2.5
8 Straight piece SP 2500 2.50 0.8 0.475 3 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 2.45 0 0.0 2.5
9 Straight piece SP 2500 2.50 0.8 0.475 3 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 2.45 0 0.0 2.5
10 Straight piece SP 2500 2.50 0.8 0.475 3 0.09 0.351 7.1 0.596 0.668 1.69 282280 30.52 0.016 2.45 0 0.0 2.5

Sub Total 20
15% margin 3
Static Pressure in Pa 23
Notes:- Pressure drop characteristics for the ducts and fittings of the ventilation systems are derived from ASHRAE Fundamentals Handbook
This document should not be relied on or used in circumstances other than those for which it was originally prepared and for which Mott MacDonald ltd. was commissioned.
Mott Macdonald ltd accepts no responsibility for which this document to any other party other than the person by whom it was commissioned.

You might also like