USER GUIDE

v1.1
 Table of Contents

1 Introduction to the MyLocker Security Software ................................ 2

2 Before You Get Started ...................................................................... 2
3 Features ............................................................................................. 2
4 Public and Secured Partition ............................................................. 3
5 How to use MyLocker ........................................................................ 4
A. Setup a Password .................................................................... 4
B. Main Screen and Button Function ............................................ 6
C. Login to the Secured Area ........................................................ 7
D. Logging Out of the Secured Area ............................................. 8
E. Change Password .................................................................... 9
F. Password Hint Feature ........................................................... 11
G. Auto Reset .............................................................................. 12
H. Configure Size / Resize Partitions .......................................... 14

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

1
1 Introduction to the MyLocker Security Software
The data stored in your USB flash drive may sometimes be highly confidential and you
need to be able to protect those data from un-authorised disclosure. The MyLocker
Security Software is a “stand-alone” application program, which helps to keep your
data safe. MyLocker offers a customizable password for the secure partition, for
which, you will be able to protect your data in the secured area with the customized
password, while leaving the non-sensitive data in the public area.
You can also customize/resize the partitions’ sizes for the secured and non-secured
area. Protecting data has never been easier with MyLocker. Feel safe and keep your
data safe with MyLocker.

2 Before You Get Started

Before using MyLocker with USB 3.0 Secure Drive, please note:
Ø DO NOT plug in two or more USB 3.0 Secure Drives at the same time
Ø MyLocker is only designed for Windows based operating system (XP or later).
Ø Please install USB 3.0 driver first before using your USB 3.0 Secure Drive
Ø It is very important that you don’t forget the password you’ve entered (password
hint feature provided). NO password recovery feature is provided.

Special Note for Windows Vista (or later) Users

Please disable ReadyBoost function first before using the MyLocker software on the
USB 3.0 Secure Drive.

3 Features
(a) Customized Password You can set your own password up to 16 characters.

(b) Password Reminder Password hint function is available as a password

reminder.

(c) Password Retry You have SIX chances of entering the correct password.
A warning will show on the fifth password retry, indicting
that one more incorrect entry, the data stored in the
secured area will be formatted and password removed.

(d) Multi Language MyLocker supports English, Japanese, Chinese

(Traditional/Simplified) language user interface.
Software automatically detects your Windows language
and show respected language UI. Default interface is set
to English.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

2
4 Public and Secured Partition
When you plug in your device to a USB port, your operating system should recognize the
device and show a “Removable Disk” icon. This is the “Public” partition and the
security application program - MyLocker will be stored in this partition.

Public
Partition

Public Area / Public Partition

When the device is inserted into the USB port, you will only see the public
partition. The public partition is available to all users to read and write data. The
security application software – MyLocker will also be stored in this partition.
Password security will only apply to/protects the secure partition and will not
affect this partition.

Secured Area / Secure Partition

This secure area is protected by user password and can only be accessed by setting
up a password (if no password had been set before). If NO password exists, then
you cannot use this partition. When a password had been setup, you will be
required to enter the password first. Once a correct password had been entered,
the public partition will disappear and the secure partition will show.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

3
5 How to use MyLocker
A. Setup a Password
(1) Insert your device to the USB port.

(2) In the removable drive, double-click and run MyLocker.exe file

(3) If you are using MyLocker for the first time, then you will be prompt to set up
a password first.
3-1. Enter a password of your choice (maximum 16 characters, including
spaces)
3-2. Confirm password by re-enter the password set.
3-3. Enter a password hint as a reminder (maximum 32 characters long,
including spaces).
Please enter a valid password hit. No password recovery feature will
be provided.
3-4. Click on to save the password set, or click on to cancel/exit.

3-1 Max. 16 characters

3-2 Max. 16 characters

3-3 Max. 32 characters

3-4

Note: You can only type in English letters and numbers

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

4
 3-5. If all information had been entered correctly, a message window will
show, and your device is now logged into the secure partition. The
device will be locked automatically (back to public partition) when you
remove it from the USB port. Click to continue.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

5
B. Main Screen and Button Function
From the public partition, double-click and run MyLocker.exe
Main screen will only show up when a password has been setup.

C E

A Password Area : for entering your password.

B Unlock/lock Device : to lock or unlock your device.

C Setting : allow to change your password or resize partitions.

D Password Hint : your password reminder.

E Exit : to exit the program.

F Device Status : icon information to tell you if the device is currently

locked or unlocked.

When you move your mouse pointer to an icon on the main screen, a text dialog
will automatically appear to tell you the function of that icon.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

6
C. Login to the Secured Area
This section will demonstrate how to log into the secured area, assuming a
password has been set up correctly (please refer to setup a password section).

(1) Enter your password in “A” then click the login button .

A B

(2) If you have entered a valid password, the following message window will show,
indicate that you have now entered the secured area. Click to continue.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

7
 (3) If you have entered an invalid password, the following message window will
show, telling you that you have entered an incorrect password, and the
remaining number of retries you have. If you have forgotten your password,
try the “Password Hint”, it may help you remember your password.
Click to continue.

Number of Max. number

incorrect tries. of retries.

D. Logging Out of the Secured Area

Method 1 : To log out from the secured area, simply run the MyLocker software
and click the “logout” button .

Method 2 : Simply remove your device from the USB port anytime, and the
device will be locked automatically.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

8
E. Change Password
(1) Click the “Setting” button .

(2) Click on the “Change Password” button .

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

9
(3) You will be asked to enter your old (current) password and the new password,
and then confirm the new password by retype the new password again. You
can also change the password hint as well. Once ready, click to apply
the new password or press to cancel and exit.

Max. 16 characters

Max. 16 characters

Max. 32 characters

(4) If all information were entered correctly, a message window will show and
tell you that the password has been changed. Click to continue.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

10
F. Password Hint Feature
You may have forgotten your password when you try to log in or change the
password. Fortunately, the Password Hint feature of MyLocker can help remind you
about the password that you have set (if you have entered a valid password hint).

(1) From the MyLocker user interface, click on the “Hint” button .

(2) A message window will appear to show you the password reminder.
Click to continue.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

11
G. Auto Reset
If you have entered a wrong password when you try to login, change password or
resize the partitions, upon the second of the last retry, you will be reminded with
the following message, telling you that if you enter a wrong password one more
time, your device will be formatted, all data in the secure area and password will
be deleted. Click to continue.

When you entered the wrong password for the last time, the SECURED partition of
your device gets formatted and password gets removed automatically. You will see
the following message window. Click to continue.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

12
During formatting of the device, a warning window will appear, telling you that
you can choose to format the device/partition(s) in “NTFS format” or “FAT32
format”.
If you choose to format the device to “NTFS format”, then only when a partition is
larger than 13GB gets formatted to NTFS format; if the partition is less than 13GB,
it will still be formatted as FAT32 format. Click to convert the partition to
NTFS or click on to keep it in FAT32.

When reset process completed, you will see the following message window
indicate that your SECURED partition gets formatted and password gets reset to
default value “1234”. Click to continue.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

13
H. Configure Size / Resize Partitions
You can re-configure the capacity size for the public area and secure area.
Please note : all data in both partitions will be erased !

(1) Click on the “Setting” button .

(2) Click the “Configure Size” button .

Current secure Current public

area size. area size.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

14
(3) Move the pointer to the left or to the right to adjust the capacity for both
partitions.

The secure area The public area

size that you size that you
want to adjust to. want to adjust to.

(4) Enter your password and click to continue; or click to cancel at any
time.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

15
(5) A warning window will appear, telling you that all the data in the device will
be destroyed. Click to continue or press to exit.

(6) When you click , formatting/resizing will take place. Do not remove
the device or force close the program before the process is completed.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

16
 During formatting/resizing of the device, a warning window will appear,
telling you that you can choose to format the device/partition(s) in “NTFS
format” or “FAT32 format”.
If you choose to format the device to “NTFS format”, then only when a
partition is larger than 13GB gets formatted to NTFS format; if the partition is
less than 13GB, it will still be formatted as FAT32 format. Click to
convert the partition to NTFS or click on to keep it in FAT32.

(7) When configuration completes successfully, the following message will show.
Click to continue.

After configuring your device, we recommend that you remove the device
from USB port and re-insert it again before using.

All Pictures Shown Are For Reference Use Only, It May Not Be Exactly The Same As What You See.

17